Provided by: libssl-doc_3.0.13-0ubuntu3.4_all bug

NAME

       SSL_get_ex_data_X509_STORE_CTX_idx, SSL_CTX_set_verify, SSL_set_verify,
       SSL_CTX_set_verify_depth, SSL_set_verify_depth, SSL_verify_cb,
       SSL_verify_client_post_handshake, SSL_set_post_handshake_auth,
       SSL_CTX_set_post_handshake_auth - set various SSL/TLS parameters for peer certificate
       verification

SYNOPSIS

        #include <openssl/ssl.h>

        typedef int (*SSL_verify_cb)(int preverify_ok, X509_STORE_CTX *x509_ctx);

        void SSL_CTX_set_verify(SSL_CTX *ctx, int mode, SSL_verify_cb verify_callback);
        void SSL_set_verify(SSL *ssl, int mode, SSL_verify_cb verify_callback);
        SSL_get_ex_data_X509_STORE_CTX_idx(void);

        void SSL_CTX_set_verify_depth(SSL_CTX *ctx, int depth);
        void SSL_set_verify_depth(SSL *ssl, int depth);

        int SSL_verify_client_post_handshake(SSL *ssl);
        void SSL_CTX_set_post_handshake_auth(SSL_CTX *ctx, int val);
        void SSL_set_post_handshake_auth(SSL *ssl, int val);

DESCRIPTION

       SSL_CTX_set_verify() sets the verification flags for ctx to be mode and specifies the
       verify_callback function to be used. If no callback function shall be specified, the NULL
       pointer can be used for verify_callback.

       SSL_set_verify() sets the verification flags for ssl to be mode and specifies the
       verify_callback function to be used. If no callback function shall be specified, the NULL
       pointer can be used for verify_callback. In this case last verify_callback set
       specifically for this ssl remains. If no special callback was set before, the default
       callback for the underlying ctx is used, that was valid at the time ssl was created with
       SSL_new(3). Within the callback function, SSL_get_ex_data_X509_STORE_CTX_idx can be called
       to get the data index of the current SSL object that is doing the verification.

       In client mode verify_callback may also call the SSL_set_retry_verify(3) function on the
       SSL object set in the x509_store_ctx ex data (see SSL_get_ex_data_X509_STORE_CTX_idx(3))
       and return 1.  This would be typically done in case the certificate verification was not
       yet able to succeed.  This makes the handshake suspend and return control to the calling
       application with SSL_ERROR_WANT_RETRY_VERIFY.  The application can for instance fetch
       further certificates or cert status information needed for the verification.  Calling
       SSL_connect(3) again resumes the connection attempt by retrying the server certificate
       verification step.  This process may even be repeated if need be.  Note that the handshake
       may still be aborted if a subsequent invocation of the callback (e.g., at a lower depth,
       or for a separate error condition) returns 0.

       SSL_CTX_set_verify_depth() sets the maximum depth for the certificate chain verification
       that shall be allowed for ctx.

       SSL_set_verify_depth() sets the maximum depth for the certificate chain verification that
       shall be allowed for ssl.

       SSL_CTX_set_post_handshake_auth() and SSL_set_post_handshake_auth() enable the Post-
       Handshake Authentication extension to be added to the ClientHello such that post-handshake
       authentication can be requested by the server. If val is 0 then the extension is not sent,
       otherwise it is. By default the extension is not sent. A certificate callback will need to
       be set via SSL_CTX_set_client_cert_cb() if no certificate is provided at initialization.

       SSL_verify_client_post_handshake() causes a CertificateRequest message to be sent by a
       server on the given ssl connection. The SSL_VERIFY_PEER flag must be set; the
       SSL_VERIFY_POST_HANDSHAKE flag is optional.

NOTES

       The verification of certificates can be controlled by a set of logically or'ed mode flags:

       SSL_VERIFY_NONE
           Server mode: the server will not send a client certificate request to the client, so
           the client will not send a certificate.

           Client mode: if not using an anonymous cipher (by default disabled), the server will
           send a certificate which will be checked. The result of the certificate verification
           process can be checked after the TLS/SSL handshake using the SSL_get_verify_result(3)
           function.  The handshake will be continued regardless of the verification result.

       SSL_VERIFY_PEER
           Server mode: the server sends a client certificate request to the client.  The
           certificate returned (if any) is checked. If the verification process fails, the
           TLS/SSL handshake is immediately terminated with an alert message containing the
           reason for the verification failure.  The behaviour can be controlled by the
           additional SSL_VERIFY_FAIL_IF_NO_PEER_CERT, SSL_VERIFY_CLIENT_ONCE and
           SSL_VERIFY_POST_HANDSHAKE flags.

           Client mode: the server certificate is verified. If the verification process fails,
           the TLS/SSL handshake is immediately terminated with an alert message containing the
           reason for the verification failure. If no server certificate is sent, because an
           anonymous cipher is used, SSL_VERIFY_PEER is ignored.

       SSL_VERIFY_FAIL_IF_NO_PEER_CERT
           Server mode: if the client did not return a certificate, the TLS/SSL handshake is
           immediately terminated with a "handshake failure" alert.  This flag must be used
           together with SSL_VERIFY_PEER.

           Client mode: ignored (see BUGS)

       SSL_VERIFY_CLIENT_ONCE
           Server mode: only request a client certificate once during the connection. Do not ask
           for a client certificate again during renegotiation or post-authentication if a
           certificate was requested during the initial handshake. This flag must be used
           together with SSL_VERIFY_PEER.

           Client mode: ignored (see BUGS)

       SSL_VERIFY_POST_HANDSHAKE
           Server mode: the server will not send a client certificate request during the initial
           handshake, but will send the request via SSL_verify_client_post_handshake(). This
           allows the SSL_CTX or SSL to be configured for post-handshake peer verification before
           the handshake occurs. This flag must be used together with SSL_VERIFY_PEER. TLSv1.3
           only; no effect on pre-TLSv1.3 connections.

           Client mode: ignored (see BUGS)

       If the mode is SSL_VERIFY_NONE none of the other flags may be set.

       The actual verification procedure is performed either using the built-in verification
       procedure or using another application provided verification function set with
       SSL_CTX_set_cert_verify_callback(3).  The following descriptions apply in the case of the
       built-in procedure. An application provided procedure also has access to the verify depth
       information and the verify_callback() function, but the way this information is used may
       be different.

       SSL_CTX_set_verify_depth() and SSL_set_verify_depth() set a limit on the number of
       certificates between the end-entity and trust-anchor certificates.  Neither the end-entity
       nor the trust-anchor certificates count against depth. If the certificate chain needed to
       reach a trusted issuer is longer than depth+2, X509_V_ERR_CERT_CHAIN_TOO_LONG will be
       issued.  The depth count is "level 0:peer certificate", "level 1: CA certificate", "level
       2: higher level CA certificate", and so on. Setting the maximum depth to 2 allows the
       levels 0, 1, 2 and 3 (0 being the end-entity and 3 the trust-anchor).  The default depth
       limit is 100, allowing for the peer certificate, at most 100 intermediate CA certificates
       and a final trust anchor certificate.

       The verify_callback function is used to control the behaviour when the SSL_VERIFY_PEER
       flag is set. It must be supplied by the application and receives two arguments:
       preverify_ok indicates, whether the verification of the certificate in question was passed
       (preverify_ok=1) or not (preverify_ok=0). x509_ctx is a pointer to the complete context
       used for the certificate chain verification.

       The certificate chain is checked starting with the deepest nesting level (the root CA
       certificate) and worked upward to the peer's certificate.  At each level signatures and
       issuer attributes are checked. Whenever a verification error is found, the error number is
       stored in x509_ctx and verify_callback is called with preverify_ok=0. By applying
       X509_CTX_store_* functions verify_callback can locate the certificate in question and
       perform additional steps (see EXAMPLES). If no error is found for a certificate,
       verify_callback is called with preverify_ok=1 before advancing to the next level.

       The return value of verify_callback controls the strategy of the further verification
       process. If verify_callback returns 0, the verification process is immediately stopped
       with "verification failed" state. If SSL_VERIFY_PEER is set, a verification failure alert
       is sent to the peer and the TLS/SSL handshake is terminated. If verify_callback returns 1,
       the verification process is continued. If verify_callback always returns 1, the TLS/SSL
       handshake will not be terminated with respect to verification failures and the connection
       will be established. The calling process can however retrieve the error code of the last
       verification error using SSL_get_verify_result(3) or by maintaining its own error storage
       managed by verify_callback.

       If no verify_callback is specified, the default callback will be used.  Its return value
       is identical to preverify_ok, so that any verification failure will lead to a termination
       of the TLS/SSL handshake with an alert message, if SSL_VERIFY_PEER is set.

       After calling SSL_set_post_handshake_auth(), the client will need to add a certificate or
       certificate callback to its configuration before it can successfully authenticate. This
       must be called before SSL_connect().

       SSL_verify_client_post_handshake() requires that verify flags have been previously set,
       and that a client sent the post-handshake authentication extension. When the client
       returns a certificate the verify callback will be invoked. A write operation must take
       place for the Certificate Request to be sent to the client, this can be done with
       SSL_do_handshake() or SSL_write_ex().  Only one certificate request may be outstanding at
       any time.

       When post-handshake authentication occurs, a refreshed NewSessionTicket message is sent to
       the client.

BUGS

       In client mode, it is not checked whether the SSL_VERIFY_PEER flag is set, but whether any
       flags other than SSL_VERIFY_NONE are set. This can lead to unexpected behaviour if
       SSL_VERIFY_PEER and other flags are not used as required.

RETURN VALUES

       The SSL*_set_verify*() functions do not provide diagnostic information.

       The SSL_verify_client_post_handshake() function returns 1 if the request succeeded, and 0
       if the request failed. The error stack can be examined to determine the failure reason.

EXAMPLES

       The following code sequence realizes an example verify_callback function that will always
       continue the TLS/SSL handshake regardless of verification failure, if wished. The callback
       realizes a verification depth limit with more informational output.

       All verification errors are printed; information about the certificate chain is printed on
       request.  The example is realized for a server that does allow but not require client
       certificates.

       The example makes use of the ex_data technique to store application data into/retrieve
       application data from the SSL structure (see CRYPTO_get_ex_new_index(3),
       SSL_get_ex_data_X509_STORE_CTX_idx(3)).

        ...
        typedef struct {
          int verbose_mode;
          int verify_depth;
          int always_continue;
        } mydata_t;
        int mydata_index;

        ...
        static int verify_callback(int preverify_ok, X509_STORE_CTX *ctx)
        {
            char    buf[256];
            X509   *err_cert;
            int     err, depth;
            SSL    *ssl;
            mydata_t *mydata;

            err_cert = X509_STORE_CTX_get_current_cert(ctx);
            err = X509_STORE_CTX_get_error(ctx);
            depth = X509_STORE_CTX_get_error_depth(ctx);

            /*
             * Retrieve the pointer to the SSL of the connection currently treated
             * and the application specific data stored into the SSL object.
             */
            ssl = X509_STORE_CTX_get_ex_data(ctx, SSL_get_ex_data_X509_STORE_CTX_idx());
            mydata = SSL_get_ex_data(ssl, mydata_index);

            X509_NAME_oneline(X509_get_subject_name(err_cert), buf, 256);

            /*
             * Catch a too long certificate chain. The depth limit set using
             * SSL_CTX_set_verify_depth() is by purpose set to "limit+1" so
             * that whenever the "depth>verify_depth" condition is met, we
             * have violated the limit and want to log this error condition.
             * We must do it here, because the CHAIN_TOO_LONG error would not
             * be found explicitly; only errors introduced by cutting off the
             * additional certificates would be logged.
             */
            if (depth > mydata->verify_depth) {
                preverify_ok = 0;
                err = X509_V_ERR_CERT_CHAIN_TOO_LONG;
                X509_STORE_CTX_set_error(ctx, err);
            }
            if (!preverify_ok) {
                printf("verify error:num=%d:%s:depth=%d:%s\n", err,
                       X509_verify_cert_error_string(err), depth, buf);
            } else if (mydata->verbose_mode) {
                printf("depth=%d:%s\n", depth, buf);
            }

            /*
             * At this point, err contains the last verification error. We can use
             * it for something special
             */
            if (!preverify_ok && (err == X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT)) {
                X509_NAME_oneline(X509_get_issuer_name(err_cert), buf, 256);
                printf("issuer= %s\n", buf);
            }

            if (mydata->always_continue)
                return 1;
            else
                return preverify_ok;
        }
        ...

        mydata_t mydata;

        ...
        mydata_index = SSL_get_ex_new_index(0, "mydata index", NULL, NULL, NULL);

        ...
        SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER | SSL_VERIFY_CLIENT_ONCE,
                           verify_callback);

        /*
         * Let the verify_callback catch the verify_depth error so that we get
         * an appropriate error in the logfile.
         */
        SSL_CTX_set_verify_depth(verify_depth + 1);

        /*
         * Set up the SSL specific data into "mydata" and store it into th SSL
         * structure.
         */
        mydata.verify_depth = verify_depth; ...
        SSL_set_ex_data(ssl, mydata_index, &mydata);

        ...
        SSL_accept(ssl);       /* check of success left out for clarity */
        if (peer = SSL_get_peer_certificate(ssl)) {
            if (SSL_get_verify_result(ssl) == X509_V_OK) {
                /* The client sent a certificate which verified OK */
            }
        }

SEE ALSO

       ssl(7), SSL_new(3), SSL_CTX_get_verify_mode(3), SSL_get_verify_result(3),
       SSL_CTX_load_verify_locations(3), SSL_get_peer_certificate(3),
       SSL_CTX_set_cert_verify_callback(3), SSL_get_ex_data_X509_STORE_CTX_idx(3),
       SSL_CTX_set_client_cert_cb(3), CRYPTO_get_ex_new_index(3)

HISTORY

       The SSL_VERIFY_POST_HANDSHAKE option, and the SSL_verify_client_post_handshake() and
       SSL_set_post_handshake_auth() functions were added in OpenSSL 1.1.1.

COPYRIGHT

       Copyright 2000-2022 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the Apache License 2.0 (the "License").  You may not use this file except
       in compliance with the License.  You can obtain a copy in the file LICENSE in the source
       distribution or at <https://www.openssl.org/source/license.html>.