Provided by: libldap-common_2.6.7+dfsg-1~exp1ubuntu8_all bug

NAME

       ldap.conf, .ldaprc - LDAP configuration file/environment variables

SYNOPSIS

       /etc/ldap/ldap.conf, ldaprc, .ldaprc, $LDAP<option-name>

DESCRIPTION

       If the environment variable LDAPNOINIT is defined, all defaulting is disabled.

       The  ldap.conf  configuration  file is used to set system-wide defaults to be applied when
       running ldap clients.

       Users may create an  optional  configuration  file,  ldaprc  or  .ldaprc,  in  their  home
       directory  which  will be used to override the system-wide defaults file.  The file ldaprc
       in the current working directory is also used.

       Additional configuration files can be specified using the LDAPCONF and LDAPRC  environment
       variables.   LDAPCONF  may  be  set to the path of a configuration file.  This path can be
       absolute or relative to the current working directory.  The LDAPRC, if defined, should  be
       the basename of a file in the current working directory or in the user's home directory.

       Environmental  variables may also be used to augment the file based defaults.  The name of
       the variable is the option name with an added prefix of LDAP.  For example, to define BASE
       via the environment, set the variable LDAPBASE to the desired value.

       Some options are user-only.  Such options are ignored if present in the ldap.conf (or file
       specified by LDAPCONF).

       Thus the following files and variables are read, in order:
           variable     $LDAPNOINIT, and if that is not set:
           system file  /etc/ldap/ldap.conf,
           user files   $HOME/ldaprc,  $HOME/.ldaprc,  ./ldaprc,
           system file  $LDAPCONF,
           user files   $HOME/$LDAPRC, $HOME/.$LDAPRC, ./$LDAPRC,
           variables    $LDAP<uppercase option name>.
       Settings late in the list override earlier ones.

SYNTAX

       The configuration options are case-insensitive; their value, on a case by case basis,  may
       be case-sensitive.

       Blank lines are ignored.
       Lines beginning with a hash mark (`#') are comments, and ignored.

       Valid lines are made of an option's name (a sequence of non-blanks, conventionally written
       in uppercase, although not required), followed by a value.   The  value  starts  with  the
       first  non-blank character after the option's name, and terminates at the end of the line,
       or at the last sequence of blanks before the end of the line.   The  tokenization  of  the
       value,  if  any,  is  delegated to the handler(s) for that option, if any.  Quoting values
       that contain blanks may be incorrect, as the quotes would become part of the  value.   For
       example,

            # Wrong - erroneous quotes:
            URI     "ldap:// ldaps://"

            # Right - space-separated list of URIs, without quotes:
            URI     ldap:// ldaps://

            # Right - DN syntax needs quoting for Example, Inc:
            BASE    ou=IT staff,o="Example, Inc",c=US
            # or:
            BASE    ou=IT staff,o=Example\2C Inc,c=US

            # Wrong - comment on same line as option:
            DEREF   never           # Never follow aliases

       A  line  cannot  be  longer  than  LINE_MAX,  which  should be more than 2000 bytes on all
       platforms.  There is no mechanism to split a long  line  on  multiple  lines,  either  for
       beautification or to overcome the above limit.

OPTIONS

       The different configuration options are:

       URI <ldap[si]://[name[:port]] ...>
              Specifies the URI(s) of an LDAP server(s) to which the LDAP library should connect.
              The URI scheme may be any of ldap, ldaps or ldapi, which refer to  LDAP  over  TCP,
              LDAP  over  SSL  (TLS) and LDAP over IPC (UNIX domain sockets), respectively.  Each
              server's name can be specified as a domain-style name or  an  IP  address  literal.
              Optionally,  the  server's  name can followed by a ':' and the port number the LDAP
              server is listening on.  If no port number is provided, the default  port  for  the
              scheme is used (389 for ldap://, 636 for ldaps://).  For LDAP over IPC, name is the
              name of the socket, and no port is  required,  nor  allowed;  note  that  directory
              separators must be URL-encoded, like any other characters that are special to URLs;
              so the socket

                   /usr/local/var/ldapi

              must be specified as

                   ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi

              A space separated list of URIs may be provided.

       BASE <base>
              Specifies the default base DN to use when performing  ldap  operations.   The  base
              must be specified as a Distinguished Name in LDAP format.

       BINDDN <dn>
              Specifies  the default bind DN to use when performing ldap operations.  The bind DN
              must be specified as a Distinguished Name in LDAP  format.   This  is  a  user-only
              option.

       DEREF <when>
              Specifies  how alias dereferencing is done when performing a search. The <when> can
              be specified as one of the following keywords:

              never  Aliases are never dereferenced. This is the default.

              searching
                     Aliases are dereferenced in subordinates of the  base  object,  but  not  in
                     locating the base object of the search.

              finding
                     Aliases are only dereferenced when locating the base object of the search.

              always Aliases  are  dereferenced both in searching and in locating the base object
                     of the search.

       HOST <name[:port] ...>
              Specifies the name(s) of an  LDAP  server(s)  to  which  the  LDAP  library  should
              connect.   Each  server's  name  can  be  specified as a domain-style name or an IP
              address and optionally followed by a ':' and the port number  the  ldap  server  is
              listening on.  A space separated list of hosts may be provided.  HOST is deprecated
              in favor of URI.

       KEEPALIVE_IDLE
              Sets/gets the number of seconds a connection needs to remain idle before TCP starts
              sending keepalive probes. Linux only.

       KEEPALIVE_PROBES
              Sets/gets  the  maximum  number of keepalive probes TCP should send before dropping
              the connection. Linux only.

       KEEPALIVE_INTERVAL
              Sets/gets the interval in seconds between individual keepalive probes.  Linux only.

       NETWORK_TIMEOUT <integer>
              Specifies the timeout (in seconds) after which the  poll(2)/select(2)  following  a
              connect(2) returns in case of no activity.

       PORT <port>
              Specifies  the  default port used when connecting to LDAP servers(s).  The port may
              be specified as a number.  PORT is deprecated in favor of URI.

       REFERRALS <on/true/yes/off/false/no>
              Specifies if the client should automatically  follow  referrals  returned  by  LDAP
              servers.   The  default  is on.  Note that the command line tools ldapsearch(1) &co
              always override this option.

       SIZELIMIT <integer>
              Specifies a size limit (number of entries) to use when  performing  searches.   The
              number should be a non-negative integer.  SIZELIMIT of zero (0) specifies a request
              for unlimited search size.  Please note that the server may still apply any server-
              side limit on the amount of entries that can be returned by a search operation.

       SOCKET_BIND_ADDRESSES <IP>
              Specifies  the  source  bind  IP  to  be used for connecting to target LDAP server.
              Multiple IP addresses must be space separated. Only one valid IPv4  address  and/or
              one valid IPv6 address are allowed in the list.

       TIMELIMIT <integer>
              Specifies  a  time  limit (in seconds) to use when performing searches.  The number
              should be a non-negative integer.  TIMELIMIT of zero (0) specifies unlimited search
              time to be used.  Please note that the server may still apply any server-side limit
              on the duration of a search operation.

       VERSION {2|3}
              Specifies what version of the LDAP protocol should be used.

       TIMEOUT <integer>
              Specifies a timeout (in seconds) after which calls to synchronous  LDAP  APIs  will
              abort  if  no response is received.  Also used for any ldap_result(3) calls where a
              NULL timeout parameter is supplied.

SASL OPTIONS

       If OpenLDAP is built with Simple Authentication and Security Layer support, there are more
       options you can specify.

       SASL_MECH <mechanism>
              Specifies the SASL mechanism to use.

       SASL_REALM <realm>
              Specifies the SASL realm.

       SASL_AUTHCID <authcid>
              Specifies the authentication identity.  This is a user-only option.

       SASL_AUTHZID <authcid>
              Specifies the proxy authorization identity.  This is a user-only option.

       SASL_SECPROPS <properties>
              Specifies  Cyrus  SASL  security properties. The <properties> can be specified as a
              comma-separated list of the following:

              none   (without   any   other   properties)   causes   the   properties    defaults
                     ("noanonymous,noplain") to be cleared.

              noplain
                     disables mechanisms susceptible to simple passive attacks.

              noactive
                     disables mechanisms susceptible to active attacks.

              nodict disables mechanisms susceptible to passive dictionary attacks.

              noanonymous
                     disables mechanisms which support anonymous login.

              forwardsec
                     requires forward secrecy between sessions.

              passcred
                     requires  mechanisms  which  pass  client credentials (and allows mechanisms
                     which can pass credentials to do so).

              minssf=<factor>
                     specifies the minimum acceptable security  strength  factor  as  an  integer
                     approximate  to  effective key length used for encryption.  0 (zero) implies
                     no protection, 1 implies integrity protection only, 128 allows RC4, Blowfish
                     and  other similar ciphers, 256 will require modern ciphers.  The default is
                     0.

              maxssf=<factor>
                     specifies the maximum acceptable security strength factor as an integer (see
                     minssf description).  The default is INT_MAX.

              maxbufsize=<factor>
                     specifies  the  maximum  security  layer  receive  buffer  size  allowed.  0
                     disables security layers.  The default is 65536.

       SASL_NOCANON <on/true/yes/off/false/no>
              Do not perform reverse DNS lookups to canonicalize SASL host names. The default  is
              off.

       SASL_CBINDING <none/tls-unique/tls-endpoint>
              The  channel-binding type to use, see also LDAP_OPT_X_SASL_CBINDING. The default is
              none.

GSSAPI OPTIONS

       If OpenLDAP is built with Generic  Security  Services  Application  Programming  Interface
       support, there are more options you can specify.

       GSSAPI_SIGN <on/true/yes/off/false/no>
              Specifies if GSSAPI signing (GSS_C_INTEG_FLAG) should be used.  The default is off.

       GSSAPI_ENCRYPT <on/true/yes/off/false/no>
              Specifies  if  GSSAPI  encryption  (GSS_C_INTEG_FLAG and GSS_C_CONF_FLAG) should be
              used. The default is off.

       GSSAPI_ALLOW_REMOTE_PRINCIPAL <on/true/yes/off/false/no>
              Specifies if GSSAPI based authentication should try to form  the  target  principal
              name  out  of  the  ldapServiceName or dnsHostName attribute of the targets RootDSE
              entry. The default is off.

TLS OPTIONS

       If OpenLDAP is built with Transport Layer Security support, there are more options you can
       specify.   These  options  are  used  when  an  ldaps://  URI  is  selected (by default or
       otherwise) or when the application negotiates TLS by issuing the LDAP StartTLS operation.

       TLS_CACERT <filename>
              Specifies  the  file  that  contains  certificates  for  all  of  the   Certificate
              Authorities the client will recognize.

       TLS_CACERTDIR <path>
              Specifies  the  path of directories that contain Certificate Authority certificates
              in separate individual files. Multiple directories may be specified, separated by a
              semi-colon.  The TLS_CACERT is always used before TLS_CACERTDIR.

       TLS_CERT <filename>
              Specifies  the  file  that  contains  the  client certificate.  This is a user-only
              option.

       TLS_ECNAME <name>
              Specify the name of the curve(s) to use for Elliptic curve Diffie-Hellman ephemeral
              key  exchange.  This option is only used for OpenSSL.  This option is not used with
              GnuTLS; the curves may be chosen in the GnuTLS ciphersuite specification.

       TLS_KEY <filename>
              Specifies the file that contains the  private  key  that  matches  the  certificate
              stored  in the TLS_CERT file. Currently, the private key must not be protected with
              a password, so it is  of  critical  importance  that  the  key  file  is  protected
              carefully.  This is a user-only option.

       TLS_CIPHER_SUITE <cipher-suite-spec>
              Specifies acceptable cipher suite and preference order.  <cipher-suite-spec> should
              be a cipher specification for the TLS library in use (OpenSSL or GnuTLS).  Example:

                     OpenSSL:
                            TLS_CIPHER_SUITE HIGH:MEDIUM:+SSLv2

                     GnuTLS:
                            TLS_CIPHER_SUITE SECURE256:!AES-128-CBC

              To check what ciphers a given spec selects in OpenSSL, use:

                   openssl ciphers -v <cipher-suite-spec>

              With GnuTLS the available specs can be found in the manual  page  of  gnutls-cli(1)
              (see the description of the option --priority).

              In  older  versions  of  GnuTLS,  where  gnutls-cli  does  not  support  the option
              --priority, you can obtain the — more limited — list of ciphers by calling:

                   gnutls-cli -l

       TLS_PROTOCOL_MIN <major>[.<minor>]
              Specifies minimum SSL/TLS protocol version that will be negotiated.  If the  server
              doesn't support at least that version, the SSL handshake will fail.  To require TLS
              1.x or higher, set this option to 3.(x+1), e.g.,

                   TLS_PROTOCOL_MIN 3.2

              would require TLS 1.1.  Specifying a minimum that is higher than that supported  by
              the  OpenLDAP  implementation will result in it requiring the highest level that it
              does support.  This parameter is ignored with GnuTLS. On Debian openldap is  linked
              against GnuTLS.

       TLS_RANDFILE <filename>
              Specifies the file to obtain random bits from when /dev/[u]random is not available.
              Generally set to the name  of  the  EGD/PRNGD  socket.   The  environment  variable
              RANDFILE  can also be used to specify the filename.  This parameter is ignored with
              GnuTLS. On Debian openldap is linked against GnuTLS.

       TLS_REQCERT <level>
              Specifies what checks to perform on server certificates  in  a  TLS  session.   The
              <level> can be specified as one of the following keywords:

              never  The client will not request or check any server certificate.

              allow  The  server  certificate  is requested. If a bad certificate is provided, it
                     will be ignored and the session proceeds normally.

              try    The server certificate is requested. If a bad certificate is  provided,  the
                     session is immediately terminated.

              demand | hard
                     These  keywords  are  equivalent  and  the same as try.  This is the default
                     setting.

       TLS_REQSAN <level>
              Specifies what checks to perform on the subjectAlternativeName (SAN) extensions  in
              a  server  certificate  when  validating the certificate name against the specified
              hostname of the server. The <level> can  be  specified  as  one  of  the  following
              keywords:

              never  The client will not check any SAN in the certificate.

              allow  The  SAN  is checked against the specified hostname. If a SAN is present but
                     none match the specified hostname, the SANs are ignored and the usual  check
                     against the certificate DN is used.  This is the default setting.

              try    The  SAN  is checked against the specified hostname. If no SAN is present in
                     the server certificate, the usual check against the certificate DN is  used.
                     If a SAN is present but doesn't match the specified hostname, the session is
                     immediately terminated. This setting may be preferred when a  mix  of  certs
                     with and without SANs are in use.

              demand | hard
                     These  keywords  are  equivalent.  The  SAN is checked against the specified
                     hostname. If no SAN is present in the server certificate, or no SANs  match,
                     the session is immediately terminated. This setting should be used when only
                     certificates with SANs are in use.

       TLS_CRLCHECK <level>
              Specifies if the Certificate Revocation List (CRL) of the  CA  should  be  used  to
              verify   if   the   server  certificates  have  not  been  revoked.  This  requires
              TLS_CACERTDIR parameter to be set. This parameter is ignored with GnuTLS. On Debian
              openldap  is  linked  against  GnuTLS.   <level>  can  be  specified  as one of the
              following keywords:

              none   No CRL checks are performed

              peer   Check the CRL of the peer certificate

              all    Check the CRL for a whole certificate chain

       TLS_CRLFILE <filename>
              Specifies the file containing a Certificate Revocation List to be used to verify if
              the  server  certificates  have  not been revoked. This parameter is only supported
              with GnuTLS.

ENVIRONMENT VARIABLES

       LDAPNOINIT
              disable all defaulting

       LDAPCONF
              path of a configuration file

       LDAPRC basename of ldaprc file in $HOME or $CWD

       LDAP<option-name>
              Set <option-name> as from ldap.conf

FILES

       /etc/ldap/ldap.conf
              system-wide ldap configuration file

       $HOME/ldaprc, $HOME/.ldaprc
              user ldap configuration file

       $CWD/ldaprc
              local ldap configuration file

SEE ALSO

       ldap(3), ldap_set_option(3), ldap_result(3), openssl(1), sasl(3)

AUTHOR

       Kurt Zeilenga, The OpenLDAP Project

ACKNOWLEDGEMENTS

       OpenLDAP   Software   is   developed   and   maintained   by    The    OpenLDAP    Project
       <http://www.openldap.org/>.   OpenLDAP Software is derived from the University of Michigan
       LDAP 3.3 Release.