Provided by: systemd_255.4-1ubuntu8.4_amd64 
NAME
systemd.mount - Mount unit configuration
SYNOPSIS
mount.mount
DESCRIPTION
A unit configuration file whose name ends in ".mount" encodes information about a file
system mount point controlled and supervised by systemd.
This man page lists the configuration options specific to this unit type. See
systemd.unit(5) for the common options of all unit configuration files. The common
configuration items are configured in the generic [Unit] and [Install] sections. The mount
specific configuration options are configured in the [Mount] section.
Additional options are listed in systemd.exec(5), which define the execution environment
the mount(8) program is executed in, and in systemd.kill(5), which define the way the
processes are terminated, and in systemd.resource-control(5), which configure resource
control settings for the processes of the service.
Note that the options User= and Group= are not useful for mount units. systemd passes two
parameters to mount(8); the values of What= and Where=. When invoked in this way, mount(8)
does not read any options from /etc/fstab, and must be run as UID 0.
Mount units must be named after the mount point directories they control. Example: the
mount point /home/lennart must be configured in a unit file home-lennart.mount. For
details about the escaping logic used to convert a file system path to a unit name, see
systemd.unit(5). Note that mount units cannot be templated, nor is possible to add
multiple names to a mount unit by creating symlinks to its unit file.
Optionally, a mount unit may be accompanied by an automount unit, to allow on-demand or
parallelized mounting. See systemd.automount(5).
Mount points created at runtime (independently of unit files or /etc/fstab) will be
monitored by systemd and appear like any other mount unit in systemd. See
/proc/self/mountinfo description in proc(5).
Some file systems have special semantics as API file systems for kernel-to-userspace and
userspace-to-userspace interfaces. Some of them may not be changed via mount units, and
cannot be disabled. For a longer discussion see API File Systems[1].
The systemd-mount(1) command allows creating .mount and .automount units dynamically and
transiently from the command line.
AUTOMATIC DEPENDENCIES
Implicit Dependencies
The following dependencies are implicitly added:
• If a mount unit is beneath another mount unit in the file system hierarchy, both a
requirement dependency and an ordering dependency between both units are created
automatically.
• Block device backed file systems automatically gain BindsTo= and After= type
dependencies on the device unit encapsulating the block device (see below).
• If traditional file system quota is enabled for a mount unit, automatic Wants= and
Before= dependencies on systemd-quotacheck.service and quotaon.service are added.
• Additional implicit dependencies may be added as result of execution and resource
control parameters as documented in systemd.exec(5) and systemd.resource-control(5).
Default Dependencies
The following dependencies are added unless DefaultDependencies=no is set:
• All mount units acquire automatic Before= and Conflicts= on umount.target in order to
be stopped during shutdown.
• Mount units referring to local file systems automatically gain an After= dependency on
local-fs-pre.target, and a Before= dependency on local-fs.target unless nofail mount
option is set.
• Network mount units automatically acquire After= dependencies on remote-fs-pre.target,
network.target and network-online.target, and gain a Before= dependency on
remote-fs.target unless nofail mount option is set. Towards the latter a Wants= unit
is added as well.
Mount units referring to local and network file systems are distinguished by their file
system type specification. In some cases this is not sufficient (for example network block
device based mounts, such as iSCSI), in which case _netdev may be added to the mount
option string of the unit, which forces systemd to consider the mount unit a network
mount.
FSTAB
Mount units may either be configured via unit files, or via /etc/fstab (see fstab(5) for
details). Mounts listed in /etc/fstab will be converted into native units dynamically at
boot and when the configuration of the system manager is reloaded. In general, configuring
mount points through /etc/fstab is the preferred approach to manage mounts for humans. For
tooling, writing mount units should be preferred over editing /etc/fstab. See systemd-
fstab-generator(8) for details about the conversion from /etc/fstab to mount units.
The NFS mount option bg for NFS background mounts as documented in nfs(5) is detected by
systemd-fstab-generator and the options are transformed so that systemd fulfills the
job-control implications of that option. Specifically systemd-fstab-generator acts as
though "x-systemd.mount-timeout=infinity,retry=10000" was prepended to the option list,
and "fg,nofail" was appended. Depending on specific requirements, it may be appropriate to
provide some of these options explicitly, or to make use of the "x-systemd.automount"
option described below instead of using "bg".
When reading /etc/fstab a few special mount options are understood by systemd which
influence how dependencies are created for mount points. systemd will create a dependency
of type Wants= or Requires= (see option nofail below), from either local-fs.target or
remote-fs.target, depending whether the file system is local or remote.
x-systemd.requires=
Configures a Requires= and an After= dependency between the created mount unit and
another systemd unit, such as a device or mount unit. The argument should be a unit
name, or an absolute path to a device node or mount point. This option may be
specified more than once. This option is particularly useful for mount point
declarations that need an additional device to be around (such as an external journal
device for journal file systems) or an additional mount to be in place (such as an
overlay file system that merges multiple mount points). See After= and Requires= in
systemd.unit(5) for details.
Note that this option always applies to the created mount unit only regardless whether
x-systemd.automount has been specified.
Added in version 220.
x-systemd.before=, x-systemd.after=
In the created mount unit, configures a Before= or After= dependency on another
systemd unit, such as a mount unit. The argument should be a unit name or an absolute
path to a mount point. This option may be specified more than once. This option is
particularly useful for mount point declarations with nofail option that are mounted
asynchronously but need to be mounted before or after some unit start, for example,
before local-fs.target unit. See Before= and After= in systemd.unit(5) for details.
Note that these options always apply to the created mount unit only regardless whether
x-systemd.automount has been specified.
Added in version 233.
x-systemd.wanted-by=, x-systemd.required-by=
In the created mount unit, configures a WantedBy= or RequiredBy= dependency on another
unit. This option may be specified more than once. If this is specified, the normal
automatic dependencies on the created mount unit, e.g., local-fs.target, are not
automatically created. See WantedBy= and RequiredBy= in systemd.unit(5) for details.
Added in version 245.
x-systemd.requires-mounts-for=
Configures a RequiresMountsFor= dependency between the created mount unit and other
mount units. The argument must be an absolute path. This option may be specified more
than once. See RequiresMountsFor= in systemd.unit(5) for details.
Added in version 220.
x-systemd.device-bound=
Takes a boolean argument. If true or no argument, a BindsTo= dependency on the backing
device is set. If false, the mount unit is not stopped no matter whether the backing
device is still present. This is useful when the file system is backed by volume
managers. If not set, and the mount comes from unit fragments, i.e. generated from
/etc/fstab by systemd-fstab-generator(8) or loaded from a manually configured mount
unit, a combination of Requires= and StopPropagatedFrom= dependencies is set on the
backing device. If doesn't, only Requires= is used.
Added in version 233.
x-systemd.automount
An automount unit will be created for the file system. See systemd.automount(5) for
details.
Added in version 215.
x-systemd.idle-timeout=
Configures the idle timeout of the automount unit. See TimeoutIdleSec= in
systemd.automount(5) for details.
Added in version 220.
x-systemd.device-timeout=
Configure how long systemd should wait for a device to show up before giving up on an
entry from /etc/fstab. Specify a time in seconds or explicitly append a unit such as
"s", "min", "h", "ms".
Note that this option can only be used in /etc/fstab, and will be ignored when part of
the Options= setting in a unit file.
Added in version 215.
x-systemd.mount-timeout=
Configure how long systemd should wait for the mount command to finish before giving
up on an entry from /etc/fstab. Specify a time in seconds or explicitly append a unit
such as "s", "min", "h", "ms".
Note that this option can only be used in /etc/fstab, and will be ignored when part of
the Options= setting in a unit file.
See TimeoutSec= below for details.
Added in version 233.
x-systemd.makefs
The file system will be initialized on the device. If the device is not "empty", i.e.
it contains any signature, the operation will be skipped. It is hence expected that
this option remains set even after the device has been initialized.
Note that this option can only be used in /etc/fstab, and will be ignored when part of
the Options= setting in a unit file.
See systemd-makefs@.service(8).
wipefs(8) may be used to remove any signatures from a block device to force
x-systemd.makefs to reinitialize the device.
Added in version 236.
x-systemd.growfs
The file system will be grown to occupy the full block device. If the file system is
already at maximum size, no action will be performed. It is hence expected that this
option remains set even after the file system has been grown. Only certain file system
types are supported, see systemd-makefs@.service(8) for details.
Note that this option can only be used in /etc/fstab, and will be ignored when part of
the Options= setting in a unit file.
Added in version 236.
x-systemd.pcrfs
Measures file system identity information (mount point, type, label, UUID, partition
label, partition UUID) into PCR 15 after the file system has been mounted. This
ensures the systemd-pcrfs@.service(8) or systemd-pcrfs-root.service services are
pulled in by the mount unit.
Note that this option can only be used in /etc/fstab, and will be ignored when part of
the Options= setting in a unit file. It is also implied for the root and /usr/
partitions discovered by systemd-gpt-auto-generator(8).
Added in version 253.
x-systemd.rw-only
If a mount operation fails to mount the file system read-write, it normally tries
mounting the file system read-only instead. This option disables that behaviour, and
causes the mount to fail immediately instead. This option is translated into the
ReadWriteOnly= setting in a unit file.
Added in version 246.
_netdev
Normally the file system type is used to determine if a mount is a "network mount",
i.e. if it should only be started after the network is available. Using this option
overrides this detection and specifies that the mount requires network.
Network mount units are ordered between remote-fs-pre.target and remote-fs.target,
instead of local-fs-pre.target and local-fs.target. They also pull in
network-online.target and are ordered after it and network.target.
Added in version 235.
noauto, auto
With noauto, the mount unit will not be added as a dependency for local-fs.target or
remote-fs.target. This means that it will not be mounted automatically during boot,
unless it is pulled in by some other unit. The auto option has the opposite meaning
and is the default.
Note that if x-systemd.automount (see above) is used, neither auto nor noauto have any
effect. The matching automount unit will be added as a dependency to the appropriate
target.
Added in version 215.
nofail
With nofail, this mount will be only wanted, not required, by local-fs.target or
remote-fs.target. Moreover the mount unit is not ordered before these target units.
This means that the boot will continue without waiting for the mount unit and
regardless whether the mount point can be mounted successfully.
Added in version 215.
x-initrd.mount
An additional filesystem to be mounted in the initrd. See initrd-fs.target description
in systemd.special(7). This is both an indicator to the initrd to mount this partition
early and an indicator to the host to leave the partition mounted until final
shutdown. Or in other words, if this flag is set it is assumed the mount shall be
active during the entire regular runtime of the system, i.e. established before the
initrd transitions into the host all the way until the host transitions to the final
shutdown phase.
Added in version 215.
If a mount point is configured in both /etc/fstab and a unit file that is stored below
/usr/, the former will take precedence. If the unit file is stored below /etc/, it will
take precedence. This means: native unit files take precedence over traditional
configuration files, but this is superseded by the rule that configuration in /etc/ will
always take precedence over configuration in /usr/.
OPTIONS
Mount unit files may include [Unit] and [Install] sections, which are described in
systemd.unit(5).
Mount unit files must include a [Mount] section, which carries information about the file
system mount points it supervises. A number of options that may be used in this section
are shared with other unit types. These options are documented in systemd.exec(5) and
systemd.kill(5). The options specific to the [Mount] section of mount units are the
following:
What=
Takes an absolute path of a device node, file or other resource to mount. See mount(8)
for details. If this refers to a device node, a dependency on the respective device
unit is automatically created. (See systemd.device(5) for more information.) This
option is mandatory. Note that the usual specifier expansion is applied to this
setting, literal percent characters should hence be written as "%%". If this mount is
a bind mount and the specified path does not exist yet it is created as directory.
Where=
Takes an absolute path of a file or directory for the mount point; in particular, the
destination cannot be a symbolic link. If the mount point does not exist at the time
of mounting, it is created as either a directory or a file. The former is the usual
case; the latter is done only if this mount is a bind mount and the source (What=) is
not a directory. This string must be reflected in the unit filename. (See above.) This
option is mandatory.
Type=
Takes a string for the file system type. See mount(8) for details. This setting is
optional.
Options=
Mount options to use when mounting. This takes a comma-separated list of options. This
setting is optional. Note that the usual specifier expansion is applied to this
setting, literal percent characters should hence be written as "%%".
SloppyOptions=
Takes a boolean argument. If true, parsing of the options specified in Options= is
relaxed, and unknown mount options are tolerated. This corresponds with mount(8)'s -s
switch. Defaults to off.
Added in version 215.
LazyUnmount=
Takes a boolean argument. If true, detach the filesystem from the filesystem hierarchy
at time of the unmount operation, and clean up all references to the filesystem as
soon as they are not busy anymore. This corresponds with umount(8)'s -l switch.
Defaults to off.
Added in version 232.
ReadWriteOnly=
Takes a boolean argument. If false, a mount point that shall be mounted read-write but
cannot be mounted so is retried to be mounted read-only. If true the operation will
fail immediately after the read-write mount attempt did not succeed. This corresponds
with mount(8)'s -w switch. Defaults to off.
Added in version 246.
ForceUnmount=
Takes a boolean argument. If true, force an unmount (in case of an unreachable NFS
system). This corresponds with umount(8)'s -f switch. Defaults to off.
Added in version 232.
DirectoryMode=
Directories of mount points (and any parent directories) are automatically created if
needed. This option specifies the file system access mode used when creating these
directories. Takes an access mode in octal notation. Defaults to 0755.
TimeoutSec=
Configures the time to wait for the mount command to finish. If a command does not
exit within the configured time, the mount will be considered failed and be shut down
again. All commands still running will be terminated forcibly via SIGTERM, and after
another delay of this time with SIGKILL. (See KillMode= in systemd.kill(5).) Takes a
unit-less value in seconds, or a time span value such as "5min 20s". Pass 0 to disable
the timeout logic. The default value is set from DefaultTimeoutStartSec= option in
systemd-system.conf(5).
Check systemd.unit(5), systemd.exec(5), and systemd.kill(5) for more settings.
SEE ALSO
systemd(1), systemctl(1), systemd-system.conf(5), systemd.unit(5), systemd.exec(5),
systemd.kill(5), systemd.resource-control(5), systemd.service(5), systemd.device(5),
proc(5), mount(8), systemd-fstab-generator(8), systemd.directives(7), systemd-mount(1)
NOTES
1. API File Systems
https://www.freedesktop.org/wiki/Software/systemd/APIFileSystems