Provided by: fence-agents-vbox_4.12.1-2~exp1ubuntu4_all 
NAME
fence_vbox - Fence agent for VirtualBox
DESCRIPTION
fence_vbox is an I/O Fencing agent which can be used with the virtual machines managed by VirtualBox. It
logs via ssh to a dom0 where it runs VBoxManage to do all of the work.
By default, vbox needs to log in as a user that is a member of the vboxusers group. Also, you must allow
ssh login in your sshd_config.
fence_vbox accepts options on the command line as well as from stdin. Fenced sends parameters through
stdin when it execs the agent. fence_vbox can be run by itself with command line options. This is useful
for testing and for turning outlets on or off from scripts.
Vendor URL: https://www.virtualbox.org/
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['\[EXPECT\]#'])
-k, --identity-file=[filename]
Identity file (private key) for SSH
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 22)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is always
required.
-x, --ssh
Use SSH connection (Default Value: 1)
--ssh-options=[options]
SSH options to use (Default Value: -t '/bin/bash -c "PS1=\[EXPECT\]# HISTFILE=/dev/null /bin/bash
--noprofile --norc"')
-l, --username=[name]
Login name This parameter is always required.
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase
verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the
command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--host-os=[os]
Operating system of the host (linux|macos|windows) (Default Value: linux)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--missing-as-off
Missing port returns OFF instead of failure
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--vboxmanage-path=[path]
Path to VBoxManage on the host (Default Value: VBoxManage)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--use-sudo
Use sudo (without password) when calling 3rd party software
--ssh-path=[path]
Path to ssh binary (Default Value: /usr/bin/ssh)
--sudo-path=[path]
Path to sudo binary (Default Value: /usr/bin/sudo)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device.
Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained
without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
command_prompt
Force Python regex for command prompt (Default Value: ['\[EXPECT\]#']) Obsoletes: cmd_prompt
identity_file
Identity file (private key) for SSH
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ip IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 22)
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug Physical plug number on device, UUID or identification of machine This parameter is always
required. Obsoletes: port
ssh Use SSH connection (Default Value: 1) Obsoletes: secure
ssh_options
SSH options to use (Default Value: -t '/bin/bash -c "PS1=\[EXPECT\]# HISTFILE=/dev/null /bin/bash
--noprofile --norc"')
username
Login name This parameter is always required. Obsoletes: login
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase
verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the
command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
host_os
Operating system of the host (linux|macos|windows) (Default Value: linux)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
missing_as_off
Missing port returns OFF instead of failure
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
vboxmanage_path
Path to VBoxManage on the host (Default Value: VBoxManage)
retry_on
Count of attempts to retry power on (Default Value: 1)
use_sudo
Use sudo (without password) when calling 3rd party software Obsoletes: sudo
ssh_path
Path to ssh binary (Default Value: /usr/bin/ssh)
sudo_path
Path to sudo binary (Default Value: /usr/bin/sudo)
fence_vbox (Fence Agent) 2009-10-20 FENCE_AGENT(8)