Provided by: git-man_2.43.0-1ubuntu7.1_all 
NAME
git-range-diff - Compare two commit ranges (e.g. two versions of a branch)
SYNOPSIS
git range-diff [--color=[<when>]] [--no-color] [<diff-options>]
[--no-dual-color] [--creation-factor=<factor>]
[--left-only | --right-only]
( <range1> <range2> | <rev1>...<rev2> | <base> <rev1> <rev2> )
[[--] <path>...]
DESCRIPTION
This command shows the differences between two versions of a patch series, or more
generally, two commit ranges (ignoring merge commits).
In the presence of <path> arguments, these commit ranges are limited accordingly.
To that end, it first finds pairs of commits from both commit ranges that correspond with
each other. Two commits are said to correspond when the diff between their patches (i.e.
the author information, the commit message and the commit diff) is reasonably small
compared to the patches' size. See ``Algorithm`` below for details.
Finally, the list of matching commits is shown in the order of the second commit range,
with unmatched commits being inserted just after all of their ancestors have been shown.
There are three ways to specify the commit ranges:
• <range1> <range2>: Either commit range can be of the form <base>..<rev>, <rev>^! or
<rev>^-<n>. See SPECIFYING RANGES in gitrevisions(7) for more details.
• <rev1>...<rev2>. This is equivalent to <rev2>..<rev1> <rev1>..<rev2>.
• <base> <rev1> <rev2>: This is equivalent to <base>..<rev1> <base>..<rev2>.
OPTIONS
--no-dual-color
When the commit diffs differ, ‘git range-diff` recreates the original diffs’ coloring,
and adds outer -/+ diff markers with the background being red/green to make it easier
to see e.g. when there was a change in what exact lines were added.
Additionally, the commit diff lines that are only present in the first commit range
are shown "dimmed" (this can be overridden using the color.diff.<slot> config setting
where <slot> is one of contextDimmed, oldDimmed and newDimmed), and the commit diff
lines that are only present in the second commit range are shown in bold (which can be
overridden using the config settings color.diff.<slot> with <slot> being one of
contextBold, oldBold or newBold).
This is known to range-diff as "dual coloring". Use --no-dual-color to revert to color
all lines according to the outer diff markers (and completely ignore the inner diff
when it comes to color).
--creation-factor=<percent>
Set the creation/deletion cost fudge factor to <percent>. Defaults to 60. Try a larger
value if git range-diff erroneously considers a large change a total rewrite (deletion
of one commit and addition of another), and a smaller one in the reverse case. See the
``Algorithm`` section below for an explanation of why this is needed.
--left-only
Suppress commits that are missing from the first specified range (or the "left range"
when using the <rev1>...<rev2> format).
--right-only
Suppress commits that are missing from the second specified range (or the "right
range" when using the <rev1>...<rev2> format).
--[no-]notes[=<ref>]
This flag is passed to the git log program (see git-log(1)) that generates the
patches.
<range1> <range2>
Compare the commits specified by the two ranges, where <range1> is considered an older
version of <range2>.
<rev1>...<rev2>
Equivalent to passing <rev2>..<rev1> and <rev1>..<rev2>.
<base> <rev1> <rev2>
Equivalent to passing <base>..<rev1> and <base>..<rev2>. Note that <base> does not
need to be the exact branch point of the branches. Example: after rebasing a branch
my-topic, git range-diff my-topic@{u} my-topic@{1} my-topic would show the differences
introduced by the rebase.
git range-diff also accepts the regular diff options (see git-diff(1)), most notably the
--color=[<when>] and --no-color options. These options are used when generating the "diff
between patches", i.e. to compare the author, commit message and diff of corresponding
old/new commits. There is currently no means to tweak most of the diff options passed to
git log when generating those patches.
OUTPUT STABILITY
The output of the range-diff command is subject to change. It is intended to be
human-readable porcelain output, not something that can be used across versions of Git to
get a textually stable range-diff (as opposed to something like the --stable option to
git-patch-id(1)). There’s also no equivalent of git-apply(1) for range-diff, the output is
not intended to be machine-readable.
This is particularly true when passing in diff options. Currently some options like --stat
can, as an emergent effect, produce output that’s quite useless in the context of
range-diff. Future versions of range-diff may learn to interpret such options in a manner
specific to range-diff (e.g. for --stat producing human-readable output which summarizes
how the diffstat changed).
CONFIGURATION
This command uses the diff.color.* and pager.range-diff settings (the latter is on by
default). See git-config(1).
EXAMPLES
When a rebase required merge conflicts to be resolved, compare the changes introduced by
the rebase directly afterwards using:
$ git range-diff @{u} @{1} @
A typical output of git range-diff would look like this:
-: ------- > 1: 0ddba11 Prepare for the inevitable!
1: c0debee = 2: cab005e Add a helpful message at the start
2: f00dbal ! 3: decafe1 Describe a bug
@@ -1,3 +1,3 @@
Author: A U Thor <author@example.com>
-TODO: Describe a bug
+Describe a bug
@@ -324,5 +324,6
This is expected.
-+What is unexpected is that it will also crash.
++Unexpectedly, it also crashes. This is a bug, and the jury is
++still out there how to fix it best. See ticket #314 for details.
Contact
3: bedead < -: ------- TO-UNDO
In this example, there are 3 old and 3 new commits, where the developer removed the 3rd,
added a new one before the first two, and modified the commit message of the 2nd commit as
well as its diff.
When the output goes to a terminal, it is color-coded by default, just like regular git
diff's output. In addition, the first line (adding a commit) is green, the last line
(deleting a commit) is red, the second line (with a perfect match) is yellow like the
commit header of git show's output, and the third line colors the old commit red, the new
one green and the rest like git show's commit header.
A naive color-coded diff of diffs is actually a bit hard to read, though, as it colors the
entire lines red or green. The line that added "What is unexpected" in the old commit, for
example, is completely red, even if the intent of the old commit was to add something.
To help with that, range uses the --dual-color mode by default. In this mode, the diff of
diffs will retain the original diff colors, and prefix the lines with -/+ markers that
have their background red or green, to make it more obvious that they describe how the
diff itself changed.
ALGORITHM
The general idea is this: we generate a cost matrix between the commits in both commit
ranges, then solve the least-cost assignment.
The cost matrix is populated thusly: for each pair of commits, both diffs are generated
and the "diff of diffs" is generated, with 3 context lines, then the number of lines in
that diff is used as cost.
To avoid false positives (e.g. when a patch has been removed, and an unrelated patch has
been added between two iterations of the same patch series), the cost matrix is extended
to allow for that, by adding fixed-cost entries for wholesale deletes/adds.
Example: Let commits 1--2 be the first iteration of a patch series and A--C the second
iteration. Let’s assume that A is a cherry-pick of 2, and C is a cherry-pick of 1 but with
a small modification (say, a fixed typo). Visualize the commits as a bipartite graph:
1 A
2 B
C
We are looking for a "best" explanation of the new series in terms of the old one. We can
represent an "explanation" as an edge in the graph:
1 A
/
2 --------' B
C
This explanation comes for "free" because there was no change. Similarly C could be
explained using 1, but that comes at some cost c>0 because of the modification:
1 ----. A
| /
2 ----+---' B
|
`----- C
c>0
In mathematical terms, what we are looking for is some sort of a minimum cost bipartite
matching; ‘1` is matched to C at some cost, etc. The underlying graph is in fact a
complete bipartite graph; the cost we associate with every edge is the size of the diff
between the two commits’ patches. To explain also new commits, we introduce dummy nodes on
both sides:
1 ----. A
| /
2 ----+---' B
|
o `----- C
c>0
o o
o o
The cost of an edge o--C is the size of C's diff, modified by a fudge factor that should
be smaller than 100%. The cost of an edge o--o is free. The fudge factor is necessary
because even if 1 and C have nothing in common, they may still share a few empty lines and
such, possibly making the assignment 1--C, o--o slightly cheaper than 1--o, o--C even if 1
and C have nothing in common. With the fudge factor we require a much larger common part
to consider patches as corresponding.
The overall time needed to compute this algorithm is the time needed to compute n+m commit
diffs and then n*m diffs of patches, plus the time needed to compute the least-cost
assignment between n and m diffs. Git uses an implementation of the Jonker-Volgenant
algorithm to solve the assignment problem, which has cubic runtime complexity. The
matching found in this case will look like this:
1 ----. A
| /
2 ----+---' B
.--+-----'
o -' `----- C
c>0
o ---------- o
o ---------- o
SEE ALSO
git-log(1)
GIT
Part of the git(1) suite