Provided by: libapp-options-perl_1.12-3_all 
NAME
App::Options - Combine command line options, environment vars, and option file values (for
program configuration)
SYNOPSIS
#!/usr/bin/perl -w
use strict;
use App::Options; # reads option values into %App::options by default
# do something with the options (in %App::options)
use DBI;
$dsn = "dbi:mysql:database=$App::options{dbname}";
$dbh = DBI->connect($dsn, $App::options{dbuser}, $App::options{dbpass});
...
Get help from the command line (assuming program is named "prog") ...
prog -?
prog --help
Option values may be provided on the command line, in environment
variables, and option files. (i.e. $ENV{APP_DBNAME} would set
the value of %App::options{dbname} by default.)
The "dbname" and other options could also be set in one of the
following configuration files
/etc/app/policy.conf
$HOME/.app/prog.conf
$HOME/.app/app.conf
$PROGDIR/prog.conf
$PROGDIR/app.conf
$PREFIX/etc/app/prog.conf
$PREFIX/etc/app/app.conf
/etc/app/app.conf
with a file format like
[prog]
dbname = prod
dbuser = scott
dbpass = tiger
See below for a more detailed explanation of these and other
advanced features.
DESCRIPTION
App::Options combines command-line arguments, environment variables, option files, and
program defaults to produce a hash of option values.
RELATION TO OTHER CONFIGURATION/OPTION PARSING MODULES
A number of modules are posted on CPAN which do command-line processing.
http://search.cpan.org/modlist/Option_Parameter_Config_Processing
App::Options is different than most of the Getopt::* modules because it integrates the
processing of command line options, environment variables, and config files.
Furthermore, its special treatment of the "perlinc" option facilitates the inclusion
("use") of application-specific perl modules from special places to enable the
installation of multiple versions of an application on the same system (i.e.
/usr/myproduct/version).
The description of the AppConfig distribution sounds similar to what is described here.
However, the following are some key differences.
* App::Options does its option processing in the BEGIN block.
This allows for the @INC variable to be modified in time
for subsequent "use" and "require" statements.
* App::Options "sections" (i.e. "[cleanup]") are conditional.
It is conditional in App::Options, allowing you to use one
set of option files to configure an entire suite of programs
and scripts. In AppConfig, the section name is simply a
prefix which gets prepended to subsequest option names.
* App::Options consults a cascading set of option files.
These files include those which are system global, project
global, and user private. This allows for system
administrators, project developers, and individual
users to all have complementary roles in defining
the configuration values.
* App::Options is not a toolkit but a standardized way of
doing option processing. With AppConfig, you still have
to decide where to put config files, and you still have to
code the "--help" feature. With App::Options, you simply
"use App::Options;" and all the hard work is done.
Advanced options can be added later as necessary as args
to the "use App::Options;" statement.
App::Options is also the easiest command-line processing system that I have found
anywhere. It then provides a smooth transition to more advanced features only as they are
needed. Every single quick and dirty script I ever write from now on can afford to use
App::Options.
The documentation of App::Options takes three forms below.
API Reference - describing the API (methods, args)
Logic Flow - describing the order and logic of processing
Usage Tutorial - describing how to use the API in practical situations
RELATION TO THE P5EE PROJECT
App::Options was motivated by and supports the P5EE/App-Context variant of the Perl 5
Enterprise Environment (P5EE). However, App::Options has no dependency on any other
module in the P5EE project, and it is very useful without any knowledge or use of other
elements of the P5EE project.
See the P5EE web sites for more information on the P5EE project.
http://www.officevision.com/pub/p5ee/index.html
API REFERENCE: Methods
init()
* Signature: App::Options->init();
* Signature: App::Options->init(%named);
* Signature: App::Options->init($myvalues);
* Signature: App::Options->init($myvalues, %named);
(NOTE: %named represents a list of name/value pairs used as named args.
Params listed below without a $ are named args.)
* Param: $myvalues HASH
specify a hash reference other than %App::options to put
configuration values in.
* Param: values HASH
specify a hash reference other than %App::options to put
configuration values in.
* Param: options ARRAY
specify a limited, ordered list of options to be displayed
when the "--help" or "-?" options are invoked
* Param: option HASH
specify additional attributes of any of
the various options to the program (see below)
* Param: no_cmd_args
do not process command line arguments
* Param: no_env_vars
do not read environment variables
* Param: no_option_file
do not read in the option file(s)
* Param: print_usage
provide an alternate print_usage() function
* Return: void
* Throws: "App::Options->init(): must have an even number of vars/values for named args"
* Throws: "App::Options->init(): 'values' arg must be a hash reference"
* Throws: "App::Options->init(): 'option' arg must be a hash reference"
* Throws: "App::Options->init(): 'options' arg must be an array reference"
* Since: 0.60
Sample Usage: (normal)
use App::Options; # invokes init() automatically via import()
This is functionally equivalent to the following, but that's not
near as nice to write at the top of your programs.
BEGIN {
use App::Options qw(:none); # import() does not call init()
App::Options->init(); # we call init() manually
}
Or we could have used a more full-featured version ...
use App::Options (
values => \%MyPackage::options,
options => [ "option_file", "prefix", "app",
"perlinc", "debug_options", "import", ],
option => {
option_file => { default => "~/.app/app.conf" }, # set default
app => { default => "app", type => "string" }, # default & type
prefix => { type => "string", required => 1; env => "PREFIX" },
perlinc => undef, # no default
debug_options => { type => "int" },
import => { type => "string" },
flush_imports => 1,
},
no_cmd_args => 1,
no_env_vars => 1,
no_option_file => 1,
print_usage => sub { my ($values, $init_args) = @_; print "Use it right!\n"; },
);
The init() method is usually called during the import() operation when the normal usage
("use App::Options;") is invoked.
The init() method reads the command line args (@ARGV), then finds an options file, and
loads it, all in a way which can be done in a BEGIN block (minimal dependencies). This is
important to be able to modify the @INC array so that normal "use" and "require"
statements will work with the configured @INC path.
The following named arguments are understood by the init() method.
values - specify a hash reference other than %App::options to
put option values in.
options - specify a limited, ordered list of options to be
displayed when the "--help" or "-?" options are invoked
option - specify optional additional information about any of
the various options to the program (see below)
no_cmd_args - do not process command line arguments
no_env_vars - do not read environment variables
no_option_file - do not read in the option file
show_all - force showing all options in "--help" even when
"options" list specified
print_usage - provide an alternate print_usage() function
args_description - provide descriptive text for what the args
of the program are (command line args after the options).
This is printed in the usage page (--help or -?).
By default, it is simply "[args]".
The additional information that can be specified about any individual option variable
using the "option" arg above is as follows.
default - the default value if none supplied on the command
line, in an environment variable, or in an option file
required - the program will not run unless a value is provided
for this option
type - if a value is provided, the program will not run unless
the value matches the type ("string", "integer", "float",
"boolean", "date", "time", "datetime", "/regexp/").
env - a list of semicolon-separated environment variable names
to be used to find the value instead of "APP_{VARNAME}".
description - printed next to the option in the "usage" page
secure - identifies an option as being "secure" (i.e. a password)
and that it should never be printed in plain text in a help
message (-?). All options which end in "pass", "passwd", or
"password" are also assumed to be secure unless a secure => 0
setting exists. If the value of the "secure" attribute is greater
than 1, a heightened security level is enforced: 2=ensure that
the value can never be supplied on a command line or from the
environment but only from a file that only the user running the
program has read/write access to. This value will also never be
read from the environment or the command line because these are
visible to other users. If the security_policy_level variable
is set, any true value for the "secure" attribute will result in
the value being set to the "security_policy_level" value.
value_description - printed within angle brackets ("<>") in the
"usage" page as the description of the option value
(i.e. --option_name=<value_description>)
The init() method stores command line options and option file values all in the global
%App::options hash (unless the "values" argument specifies another reference to a hash to
use).
The special options are as follows.
option_file - specifies the exact file name of the option file to be
used (i.e. "app --option_file=/path/to/app.conf").
app - specifies the tag that will be used when searching for
an option file. (i.e. "app --app=myapp" will search for "myapp.conf"
before it searches for "app.conf")
"app" is automatically set with the stem of the program file that
was run (or the first part of PATH_INFO) if it is not supplied at
the outset as an argument.
prefix - This represents the base directory of the software
installation (i.e. "/usr/myproduct/1.3.12"). If it is not
set explicitly, it is detected from the following places:
1. PREFIX environment variable
2. the real path of the program with /bin or /cgi-bin stripped
3. /usr/local (or whatever "prefix" perl was compiled with)
If it is autodetected from one of those three places, that is
only provisional, in order to find the "option_file". The "prefix"
variable should be set authoritatively in the "option_file" if it
is desired to be in the $values structure.
perlinc - a path of directories to prepend to the @INC search path.
This list of directories is separated by any combination of
[,; ] characters.
debug_options - if this is set, a variety of debug information is
printed out during the option processing. This helps in debugging
which option files are being used and what the resulting variable
values are. The following numeric values are defined.
1 = print the basic steps of option processing
2 = print each option file searched, final values, and resulting @INC
3 = print each value as it is set in the option hash
4 = print overrides from ENV and variable substitutions
5 = print each line of each file with exclude_section indicator
6 = print option file section tags, condition evaluation, and
each value found (even if it is not set in the final values)
7 = print final values
import - a list of additional option files to be processed.
An imported file goes on the head of the queue of files to be
processed.
hostname - the hostname as returned by the hostname() function
provided by Sys::Hostname (may or may not include domain
qualifiers as a fully qualified domain name).
host - same as hostname, but with any trailing domain name removed.
(everything after the first ".")
flush_imports - flush all pending imported option files.
security_policy_level - When set, this enforces that whenever secure
attributes are applied, they are set to the same level. When set
0, all of the security features are disabled (passwords can be
viewed with "--security_policy_level=0 --help"). When set to 2,
all secure options can only be read from files which do not have
read/write permission by any other user except the one running the
program.
LOGIC FLOW: OPTION PROCESSING DETAILS
Basic Concept - By calling App::Options->init(), your program parses the command line,
environment variables, and option files, and puts var/value pairs into a global option
hash, %App::options. Just include the following at the top of your program in order to
imbue it with many valuable option-setting capabilities.
use App::Options;
When you "use" the App::Options module, the import() method is called automatically. This
calls the init() method, passing along all of its parameters.
One of the args to init() is the "values" arg, which allows for a different hash to be
specified as the target of all option variables and values.
use App::Options (values => \%Mymodule::opts);
Throughout the following description of option processing, the %App::options hash may be
referred to as the "options hash". However it will be understood that some other hash (as
specified by the "values" arg) may actually be used.
Command Line Arguments
Unless the "no_cmd_args" arg is specified to init(), the first source of option values is
the command line.
Each command line argument that begins with a "-" or a "--" is considered to be an option.
It may take any form such as
--verbose # long option, no arg
--verbose=5 # long option, with arg
--city=ATL # long option, with arg
-x # short option, no arg
-t=12:30 # short option, with arg
All detected options are shifted out of @ARGV and the values are set in the options hash
(%App::options). Options without args are understood to have a value of "1". So
"--verbose" is identical to "--verbose=1".
Naturally, the "--" option terminates command line option processing.
Command Line Argument Variable Substitution
Any value which includes a variable undergoes variable substitution before it is placed in
the option hash. i.e.
logdir = ${prefix}/log
This line will be expanded properly. (Of course, the variable and its value should be
already set in the option hash.)
Variable substitution is also performed to interpolate values from the environment.
port = $ENV{HTTP_PORT}
Special Option "app"
If the special option, "app", was not given on the command line, it is initialized. This
option is useful for including or excluding different sections of the option files.
To handle the special case that the program is running in a CGI environment, the PATH_INFO
variable is checked first. The first segment of the PATH_INFO is stripped off, and that
becomes the value of the "app" option.
Otherwise, the stem of the program name becomes the value of the "app" option. The stem
is the program name without any trailing extension (i.e. ".exe", ".pl", etc.).
The Program Directory
One of the places that will be searched for option files is the directory in which the
program exists on the file system. This directory is known internally as "$prog_dir".
Special Option "prefix"
The special option, "prefix", represents the root directory of the software installation.
On a Unix system, a suite of software might by installed at "/usr/myproduct/thisversion",
and that would be the "prefix". Under this directory, you would expect to find the "src",
"bin", "lib", and "etc" directories, as well as perhaps "cgi-bin", "htdocs", and others.
If the "prefix" option is not specified on the command line, the $PREFIX environment
variable is used.
If that is not set, the $prog_dir with the trailing "/bin" or "/cgi-bin" stripped off is
used.
Option Files
Unless the "no_option_file" arg is specified to init(), the next source of option values
is the option files.
By default, a cascading set of option files are all consulted to allow individual users to
specify values that override the normal values for certain programs. Furthermore, the
values for individual programs can override the values configured generally system-wide.
The resulting value for an option variable comes from the first place that it is ever
seen. Subsequent mentions of the option variable within the same or other option files
will be ignored.
The following files are consulted in order.
$ENV{HOME}/.app/$app.conf
$ENV{HOME}/.app/app.conf
$prog_dir/$app.conf
$prog_dir/app.conf
$prefix/etc/app/$app.conf
$prefix/etc/app/app.conf
/etc/app/app.conf
Thus, a system administrator might set up the $prefix/etc/app/app.conf file with system-
wide defaults. All option configuration could be done in this single file, separating the
relevant variables into different sections for each different program to be configured.
However, if the administrator decided that there were too many parameters for a single
program such that it cluttered this file, he might put the option values for that program
into the $prefix/etc/app/$app.conf file. This distinction is a matter of preference, as
both methods are equally functional.
A program developer may decide to override some of the system-wide option values for
everyone by putting option files in the program's own directory.
Furthermore, a user may decide to override some of the resulting option values by putting
some option files in the appropriate place under his home directory.
This separation of config files also allows for secure information (such as database
passwords) to be required to be provided in the user's own (secured) option files rather
than in read-only system-wide option files.
Specifying the "--debug_options" option on the command line will assist in figuring out
which files App::Options is looking at.
Option File Format
In general an option file takes the form of lines with "var = value".
dbname = prod # this is the production database
dbuser = scott
dbpass = tiger
Trailing comments (preceded by a "#") are trimmed off. Spaces before and after the
variable, and before and after the value are all trimmed off. Then enclosing double-
quotes (") are trimmed off. Variables can be any of the characters in [a-zA-Z0-9_.-].
Values can be any printable characters or the empty string. Any lines which aren't
recognizable as "var = value" lines or section headers (see below) are ignored.
If certain variables should be set only for certain programs (or under certain other
conditions), section headers may be introduced. The special section headers "[ALL]" and
"[]" specify the end of a conditional section and the resumption of unconditional option
variables.
[progtest]
dbname = test # this is the test database
[ALL]
dbname = prod # this is the production database
dbuser = scott
dbpass = tiger
In this case, the "progtest" program will get "dbname = test" while all other programs
will get "dbname = prod".
Note that you would not get the desired results if the "dbname = prod" statement was above
the "[progtest]" header. Once an option variable is set, no other occurrence of that
variable in any option file will override it.
For the special case where you want to specify a section for only one variable as above,
the following shortcut is provided.
[progtest] dbname = test # this is the test database
dbname = prod # this is the production database
dbuser = scott
dbpass = tiger
The "[progtest]" section header applied for only the single line.
Furthermore, if it were desired to make this override for all programs containing "test"
in them, you would use the following syntax.
[/test/] dbname = test # this is the test database
dbname = prod # this is the production database
dbuser = scott
dbpass = tiger
The "[/test/]" section header tested the "app" option using an arbitrary regular
expression.
The section headers can create a condition for inclusion based on any of the variables
currently in the option hash. In fact, "[progtest]" is just a synonym for
"[app=progtest]" and "[/test/]" is a synonym for "[app=/test/]".
If, for instance, the usernames and passwords were different for the different databases,
you might have the following.
[/test/] dbname = test # progs with "test" go to test database
dbname = prod # other progs go to the production database
[dbname=test] # progs
dbuser = scott
dbpass = tiger
[dbname=prod]
dbuser = mike
dbpass = leopard
The conditions created by a section header may be the result of more than a single
condition.
[dbname=test;dbuser=scott]
dbpass = tiger
[dbname=test;dbuser=ken]
dbpass = ocelot
[dbname=prod;dbuser=scott]
dbpass = tiger62
[dbname=prod;dbuser=ken]
dbpass = 3.ocelot_
Any number of conditions can be included with semicolons separating them.
Each time a variable/value pair is found in an option file, it is only included in the
option hash if that variable is currently not defined in the option hash. Therefore,
option files never override command line parameters.
Option Environment Variables and Variable Substitution
For each variable/value pair that is to be inserted into the option hash from the option
files, the corresponding environment variables are searched to see if they are defined.
The environment always overrides an option file value. (If the "no_env_vars" arg was
given to the init() method, this whole step of checking the environment is skipped.)
By default, the environment variable for an option variable named "dbuser" would be
"APP_DBUSER". However, if the "env" attribute of the "dbuser" option is set, a different
environment variable may be checked instead (see the Tutorial below for examples).
After checking the environment for override values, any value which includes a variable
undergoes variable substitution before it is placed in the option hash.
Setting Environment Variables from Option Files
Any variable of the form "ENV{XYZ}" will set the variable XYZ in the environment rather
than in the options hash. Thus, the syntax
ENV{LD_LIBRARY_PATH} = ${prefix}/lib
will enhance the LD_LIBRARY_PATH appropriately.
Note that this only works for options set in an options file. It does not work for
options set on the command line, from the environment itself, or from the program-supplied
default.
Under some circumstances, the perl interpreter will need to be restarted in order to pick
up the new LD_LIBRARY_PATH. In that case, you can include the special option
perl_restart = 1
An example of where this might be useful is for CGI scripts that use the DBI and
DBD::Oracle because the Oracle libraries are dynamically linked at runtime.
NOTE: The other standard way to handle CGI scripts which require special environment
variables to be set is with Apache directives in the httpd.conf or .htaccess files. i.e.
SetEnv LD_LIBRARY_PATH /home/oracle/oracle/product/10.2.0/oraclient/lib
SetEnv ORACLE_HOME /home/oracle/oracle/product/10.2.0/oraclient
NOTE: Yet another standard way to handle CGI scripts which require an enhanced
LD_LIBRARY_PATH specifically is to use the /etc/ld.so.conf file. Edit /etc/ld.so.conf and
then run ldconfig (as root). This adds your specific path to the "standard system places"
that are searched for shared libraries. This has nothing to do with App::Options or
environment variables of course.
import and flush_imports
After each option file is read, the special option "flush_imports" is checked. If set,
the list of pending option files to be parsed is cleared, and the flush_imports option is
also cleared.
This is useful if you do not want to inherit any of the option values defined in system-
wide option files.
The special option "import" is checked next. If it is set, it is understood to be a list
of option files (separated by /[,; ]+/) to be prepended to the list of pending option
files. The import option itself is cleared.
Other Environment Variables and Defaults
After command line options and option files have been parsed, all of the other options
which are known to the program are checked for environment variables and defaults.
Options can be defined for the program with either the "options" arg or the "option" arg
to the init() method (or a combination of both).
use App::Options (
options => [ "dbname", "dbuser", "dbpass" ],
option => {
dbname => {
env => "DBNAME",
default => "devel",
},
dbuser => {
env => "DBUSER;DBI_USER",
},
dbpass => {
env => "", # password in %ENV is security breach
},
},
);
For each option variable known, if the value is not already set, then the environment is
checked, the default is checked, variable expansion is performed, and the value is entered
into the option hash.
Special Option prefix
The special option "prefix" is reconciled and finalized next.
Unless it was specified on the command line, the original "prefix" was autodetected. This
may have resulted in a path which was technically correct but was different than intended
due to symbolic linking on the file system.
Since the "prefix" variable may also be set in an option file, there may be a difference
between the auto-detected "prefix" and the option file "prefix". If this case occurs, the
option file "prefix" is the one that is accepted as authoritative.
Special Option perlinc
One of the primary design goals of App::Options was to be able to support multiple
installations of software on a single machine.
Thus, you might have different versions of software installed under various directories
such as
/usr/product1/1.0.0
/usr/product1/1.1.0
/usr/product1/2.1.5
Naturally, slightly different versions of your perl modules will be installed under each
different "prefix" directory. When a program runs from /usr/product1/1.1.0/bin, the
"prefix" will by "/usr/product1/1.1.0" and we want the @INC variable to be modified so
that the appropriate perl modules are included from $prefix/lib/*.
This is where the "perlinc" option comes in.
If "perlinc" is set, it is understood to be a list of paths (separated by /[ ,;]+/) to be
prepended to the @INC variable.
If "perlinc" is not set, "$prefix/lib/perl5/$perlversion" and
"$prefix/lib/perl5/site_perl/$perlversion" are automatically prepended to the @INC
variable as a best guess.
Special Option debug_options
If the "debug_options" variable is set (often on the command line), the list of option
files that was searched is printed out, the resulting list of variable values is printed
out, and the resulting list of include directories (@INC) is printed out.
Version
After all values have been parsed, various conditions are checked to see if the program
should print diagnostic information rather than continue running. Two of these examples
are --version and --help.
If the "--version" option is set on the command line, the version information for all
loaded modules is printed, and the program is exited. (The version of a package/module is
assumed to be the value of the $VERSION variable in that package. i.e. The version of the
XYZ::Foo package is $XYZ::Foo::VERSION.)
prog --version
Of course, this is all done implicitly in the BEGIN block (during "use App::Options;").
If your program tried to set $main::VERSION, it may not be set unless it is set explicitly
in the BEGIN block.
#!/usr/bin/perl
BEGIN {
$VERSION = "1.12";
}
use App::Options;
This can be integrated with CVS file versioning using something like the following.
#!/usr/bin/perl
BEGIN {
$VERSION = do { my @r=(q$Revision: 14478 $=~/\d+/g); sprintf "%d."."%02d"x$#r,@r};
}
use App::Options;
Furthermore, the version information about some modules that you might expect to have seen
will not be printed because those modules have not yet been loaded. To fix this, use the
--version_packages option (or set it in an option file). This option contains a comma-
separated list of modules and/or module regular expressions. The modules are loaded, and
the version information from all resulting packages that match any of the patterns is
printed.
prog --version --version_packages=CGI
prog --version --version_packages=CGI,Template
This also cuts down on the miscellaneous modules (and pragmas) which might have cluttered
up your view of the version information you were interested in. If you really wish to see
version information for all modules, use the --version=all option.
prog --version=all --version_packages=CGI,Template
Help and Validations
If the "-?" or "--help" options were set on the command line, the usage statement is
printed, and the program is exited.
Then each of the options which is defined may be validated.
If an option is designated as "required", its value must be defined somewhere (although it
may be the empty string). (If it is also required to be a non-empty string, a regex may
be provided for the type, i.e. type => "/./".)
If an option is designated as having a "type", its value must either be undefined or match
a specific regular expression.
Type Regular Expression
========= =========================================
string (any)
integer /^-?[0-9_]+$/
float /^-?[0-9_]+\.?[0-9_]*([eE][+-]?[0-9_]+)?$/
(or) /^-?\.[0-9_]+([eE][+-]?[0-9_]+)?$/
boolean /^[01]$/
date /^[0-9]{4}-[01][0-9]-[0-3][0-9]$/
datetime /^[0-9]{4}-[01][0-9]-[0-3][0-9] [0-2][0-9]:[0-5][0-9]:[0-5][0-9]$/
time /^[0-2][0-9]:[0-5][0-9]:[0-5][0-9]$/
/regexp/ /regexp/
Note that an arbitrary regular expression may be designated as the "type" by enclosing it
in slashes (i.e. "/^[YN]$/").
If the options fail any of the "required" or "type" validation tests, the
App::Options::print_usage() function is called to print out a usage statement and the
program is exited.
USAGE TUTORIAL
Getting Started
Create a perl program called "demo1".
#!/usr/bin/perl
use App::Options;
print "Wow. Here are the options...\n";
foreach (sort keys %App::options) { # options appear here!
printf("%-20s => %s\n", $_, $App::options{$_});
}
Run it different kinds of ways to see how it responds.
demo1
demo1 -x
demo1 -x --verbose
demo1 --x -verbose
demo1 -x=5 --verbose=10 --foo=bar
demo1 --help
demo1 -x=8 --help
demo1 -?
demo1 --debug_options -?
demo1 -x=5 --verbose=10 --foo=bar --debug_options -?
demo1 --version
demo1 --version --version_packages=CGI
Now create a copy of the program.
cp demo1 demo2
Start putting entries like the following
x = 7
hello = world
[demo2]
verbose=3
[/demo/]
baz = foo
in the following files
$HOME/.app/demo1.conf
$HOME/.app/demo2.conf
$HOME/.app/app.conf
demo1.conf (same directory as the demo* programs)
demo2.conf (same directory as the demo* programs)
app.conf (same directory as the demo* programs)
$PREFIX/etc/app/demo1.conf
$PREFIX/etc/app/demo2.conf
$PREFIX/etc/app/app.conf
/etc/app/app.conf
and see how the programs respond in each different case.
Next set environment variables like the following and see how the programs respond.
export APP_X=14
export APP_VERBOSE=7
export APP_FOO=xyzzy
export APP_HELLO=Plugh!
You are well on your way.
A Development Scenario
Now let's imagine that we are writing a suite of programs which operate on a relational
database. These programs are part of a larger system which goes through a development
cycle of development, test, and production. Each step in the development cycle, the
programs will run against different databases, but we don't want that to affect the code.
Let's suppose that we write a program which lists the customers in a customer table.
create table person (
person_id integer not null auto_increment primary key,
first_name varchar(99) null,
last_name varchar(99) null,
birth_dt date null,
company_id integer null,
wholesale_ind char(1) null,
change_dttm datetime not null,
);
We call this program "listcust".
#!/usr/bin/perl -e
use strict;
use App::Options;
use DBI;
my $dsn = "dbi:$App::options{dbdriver}:database=$App::options{dbname}";
my $dbh = DBI->connect($dsn, $App::options{dbuser}, $App::options{dbpass});
my $sql = "select first_name, last_name, birth_dt, company_id, wholesale_ind, change_dttm from person";
my $cust = $dbh->selectall_arrayref($sql);
foreach my $row (@$cust) {
printf("%-24 %-24 %s %9d %s\n", @$row);
}
$dbh->disconnect();
Then you can invoke this program with all of the command line options and everything works
fine.
listcust --dbdriver=mysql --dbname=prod --dbuser=scott --dbpass=tiger
However, if you don't use all of the options, you will get a DBI error. Furthermore,
"listcust --help" doesn't help very much. A system administrator confronting this problem
would put the following lines into "$PREFIX/etc/app/app.conf" or
"$PREFIX/etc/app/listcust.conf".
dbdriver = mysql
dbname = prod
dbuser = scott
dbpass = tiger
If, however, your projects were not in the habit of using the PREFIX environment variable
and the program is not installed in $PREFIX/bin, he would have to put the above lines in
either the "app.conf" file or the "listcust.conf" file in the same directory as "listcust"
or in the global "/etc/app/app.conf" option file.
A user (without privileges to the "$PREFIX/etc/app" directory or the directory in which
"listcust" lives) would have to put the described lines into "$HOME/.app/app.conf" or
"$HOME/.app/listcust.conf".
Putting the options in any of those files would make "--help" print something intelligent.
A developer, however, might decide that the program should have some defaults.
use App::Options (
option => {
dbdriver => "mysql",
dbname => "prod",
dbuser => "scott",
dbpass => "tiger",
},
);
(This supplies defaults and also makes "--help" print something intelligent, regardless of
whether there are any configuration files.)
If all you wanted to do was provide defaults for options, this format would be fine.
However, there are other useful attributes of an option besides just the "default". To
use those, you generally would use the more complete form of the "option" arg.
use App::Options (
option => {
dbdriver => { default => "mysql", },
dbname => { default => "prod", },
dbuser => { default => "scott", },
dbpass => { default => "tiger", },
},
);
Then we can indicate that these options are all required. If they are not provided, the
program will not run.
Meanwhile, it makes no sense to provide a "default" for a password. We can remove the
default, but if we ever tried to run the program without providing the password, it would
not get past printing a "usage" statement.
use App::Options (
option => {
dbdriver => { required => 1, default => "mysql", },
dbname => { required => 1, default => "prod", },
dbuser => { required => 1, default => "scott", },
dbpass => { required => 1, },
},
);
We now might enhance the code in order to list only the customers which had certain
attributes.
my $sql = "select first_name, last_name, birth_dt, company_id, wholesale_ind, change_dttm from person";
my (@where);
push(@where, "first_name like '%$App::options{first_name}%'")
if ($App::options{first_name});
push(@where, "last_name like '%$App::options{last_name}%'")
if ($App::options{last_name});
push(@where, "birth_dt = '$App::options{birth_dt}'")
if ($App::options{birth_dt});
push(@where, "company_id = $App::options{company_id}")
if ($App::options{company_id});
push(@where, "wholesale_ind = '$App::options{wholesale_ind}'")
if ($App::options{wholesale_ind});
push(@where, "change_dttm >= '$App::options{change_dttm}'")
if ($App::options{change_dttm});
if ($#where > -1) {
$sql .= "\nwhere " . join("\n and ", @where) . "\n";
}
my $cust = $dbh->selectall_arrayref($sql);
The init() method call might be enhanced to look like this. Also, the order that the
options are printed by "--help" can be set with the "options" argument. (Otherwise, they
would print in alphabetical order.)
use App::Options (
options => [ "dbdriver", "dbname", "dbuser", "dbpass",
"first_name", "last_name", "birth_dt", "company_id",
"wholesale_ind", "change_dttm",
],
option => {
dbdriver => {
description => "dbi driver name",
default => "mysql",
env => "DBDRIVER", # use a different env variable
required => 1,
},
dbname => {
description => "database name",
default => "prod",
env => "DBNAME", # use a different env variable
required => 1,
},
dbuser => {
description => "database user",
default => "scott",
env => "DBUSER;DBI_USER", # check both
required => 1,
},
dbpass => {
description => "database password",
env => "", # disable env for password (insecure)
required => 1,
secure => 1, # FYI. This is inferred by the fact that "dbpass"
# ends in "pass", so it is not necessary.
},
first_name => {
description => "portion of customer's first name",
},
last_name => {
description => "portion of customer's last name",
},
birth_dt => {
description => "customer's birth date",
type => "date",
},
company_id => {
description => "customer's company ID",
type => "integer",
},
wholesale_ind => {
description => "indicator of wholesale customer",
type => "/^[YN]$/",
},
change_dttm => {
description => "changed-since date/time",
type => "datetime",
},
},
);
It should be noted in the example above that the default environment variable name
("APP_${varname}") has been overridden for some of the options. The "dbname" variable
will be set from "DBNAME" instead of "APP_DBNAME". The "dbuser" variable will be set from
either "DBUSER" or "DBI_USER".
It should also be noted that if only the order of the options rather than all of their
attributes were desired, the following could have been used.
use App::Options (
options => [ "dbdriver", "dbname", "dbuser", "dbpass",
"first_name", "last_name", "birth_dt", "company_id",
"wholesale_ind", "change_dttm",
],
);
Using the "options" arg causes the options to be printed in the order given in the
"--help" output. Then the remaining options defined in the "option" arg are printed in
alphabetical order. All other options which are set on the command line or in option
files are printed if the "show_all" option is set. This option is off by default if
either the "options" arg or the "option" arg are supplied and on if neither are supplied.
If, for some reason, the program needed to put the options into a different option hash
(instead of %App::options) or directly specify the option file to use (disregarding the
standard option file search path), it may do so using the following syntax.
use App::Options (
values => \%Mymodule::opts,
option_file => "/path/to/options.conf",
);
If, for some reason, the program needs to inhibit one or more of the sources for options,
it can do so with one of the following arguments. Of course, inhibiting all three would
be a bit silly.
use App::Options (
no_cmd_args => 1,
no_option_file => 1,
no_env_vars => 1,
);
A Deployment Scenario
Sometimes a software system gets deployed across many machines. You may wish to have a
single option file set different values when it is deployed to different machines.
For this purpose, the automatic "host" and "hostname" values are useful. Suppose you have
four servers named "foo1", "foo2", "foo3", and "foo4". You may wish the software to use
different databases on each server. So app.conf might look like this.
[host=foo1] dbname = devel
[host=foo2]
dbname = test
[host=foo3]
dbname = prod
[ALL]
dbname = prod
Hopefully, that's enough to get you going.
I welcome all feedback, bug reports, and feature requests.
ACKNOWLEDGEMENTS
* (c) 2010 Stephen Adkins
* Author: Stephen Adkins <spadkins@gmail.com>
* License: This is free software. It is licensed under the same terms as Perl itself.