NAME

       Config::Model::models::LCDd::MtxOrb - Configuration class LCDd::MtxOrb

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   Brightness
       Set the initial brightness  Optional. Type integer.

       upstream_default value :
           1000

   Contrast
       Set the initial contrast NOTE: The driver will ignore this if the display
             is a vfd or vkd as they don't have this feature.  Optional. Type uniline.

       upstream_default value :
           480

   Device
       Select the output device to use  Optional. Type uniline.

       upstream_default value :
           /dev/lcd

   KeyMap_A
       The  following  table  translates  from  MtxOrb key letters to logical key names.  By default no keys are
       mapped, meaning the keypad is not used at all.  Optional. Type uniline.

       upstream_default value :
           Left

   KeyMap_B
        Optional. Type uniline.

       upstream_default value :
           Right

   KeyMap_C
        Optional. Type uniline.

       upstream_default value :
           Up

   KeyMap_D
        Optional. Type uniline.

       upstream_default value :
           Down

   KeyMap_E
        Optional. Type uniline.

       upstream_default value :
           Enter

   KeyMap_F
        Optional. Type uniline.

       upstream_default value :
           Escape

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched off in case  LCDd
       is inactive.  Optional. Type integer.

       upstream_default value :
           0

   Size
       Set the display size  Optional. Type uniline.

       upstream_default value :
           20x4

   Speed
       Set the communication speed  Optional. Type enum. choice: '1200', '2400', '9600', '19200'.

       upstream_default value :
           19200

   Type
       Set the display type  Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'.

       upstream_default value :
           lcd

   hasAdjustableBacklight
       Some  old  displays  do not have an adjustable backlight but only can switch the backlight on/off. If you
       experience randomly appearing block characters, try setting this to false.  Optional. Type boolean.

       upstream_default value :
           yes

   keypad_test_mode
       See the [menu] section for an explanation of the key mappings You can find out which key of your  display
       sends  which  character  by  setting  keypad_test_mode  to  yes  and  running  LCDd. LCDd will output all
       characters it receives.  Afterwards you can modify the settings  above  and  set  keypad_set_mode  to  no
       again.  Optional. Type uniline.

       default value :
           no

SEE ALSO

       •   cme

perl v5.36.0                                       2023-10-13              Config::Model:...s::LCDd::MtxOrb(3pm)