NAME

       Config::Model::models::LCDd::picolcd - Configuration class LCDd::picolcd

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   Backlight
       Sets the initial state of the backlight upon start-up.  Optional. Type boolean.

       upstream_default value :
           on

   Brightness
       Set the initial brightness . Works only with the 20x4 device.  Optional. Type integer.

       upstream_default value :
           1000

   Contrast
       Set the initial contrast  Optional. Type integer.

       upstream_default value :
           1000

   Key0Light
       If  Keylights  is  on, the you can unlight specific keys below: Key0 is the directional pad.  Key1 - Key5
       correspond to the F1 - F5 keys.  There is no LED for the +/- keys.  This is a handy way  to  indicate  to
       users which keys are disabled.   Optional. Type boolean.

       upstream_default value :
           on

   Key1Light
        Optional. Type uniline.

       default value :
           on

   Key2Light
        Optional. Type uniline.

       default value :
           on

   Key3Light
        Optional. Type uniline.

       default value :
           on

   Key4Light
        Optional. Type uniline.

       default value :
           on

   Key5Light
        Optional. Type uniline.

       default value :
           on

   KeyRepeatDelay
       Key  auto repeat is only available if the picoLCD driver is built with libusb-1.0. Use KeyRepeatDelay and
       KeyRepeatInterval to configure key auto repeat.

       Key auto repeat delay (time in ms from first key report to  first  repeat).  Use  zero  to  disable  auto
       repeat.  Optional. Type integer.

       upstream_default value :
           300

   KeyRepeatInterval
       Key  auto  repeat  interval (time in ms between repeat reports). Only used if KeyRepeatDelay is not zero.
       Optional. Type integer.

       upstream_default value :
           200

   KeyTimeout
       KeyTimeout is only used if the picoLCD driver is built with libusb-0.1. When built  with  libusb-1.0  key
       and IR data is input asynchronously so there is no need to wait for the USB data.  KeyTimeout is the time
       in  ms  that LCDd spends waiting for a key press before cycling through other duties.  Higher values make
       LCDd use less CPU time and make key presses more detectable.  Lower values make LCDd more responsive  but
       a  little  prone to missing key presses.  500 (.5 second) is the default and a balanced value.  Optional.
       Type integer.

       upstream_default value :
           500

   Keylights
       Light the keys?  Optional. Type boolean.

       upstream_default value :
           on

   LinkLights
       Link the key lights to the backlight?  Optional. Type boolean.

       upstream_default value :
           on

   LircFlushThreshold
       Threshold in microseconds of the gap that triggers flushing the IR data to  lirc  If  LircTime_us  is  on
       values  greater  than 32.767ms will disable the flush If LircTime_us is off values greater than 1.999938s
       will disable the flush.  Optional. Type integer.

       upstream_default value :
           8000

   LircHost
       Host name or IP address of the LIRC instance that is to receive IR codes If not set, or set to  an  empty
       value, IR support is disabled.  Optional. Type uniline.

       upstream_default value :
           127.0.0.1

   LircPort
       UDP port on which LIRC is listening  Optional. Type integer.

       upstream_default value :
           8765

   LircTime_us
       UDP data time unit for LIRC On:  times sent in microseconds (requires LIRC UDP driver that accepts this).
       Off: times sent in 'jiffies' (1/16384s) (supported by standard LIRC UDP driver).  Optional. Type boolean.

       upstream_default value :
           off

   OffBrightness
       Set  the  brightness  while  the  backlight  is 'off' .  Works only with the 20x4 device.  Optional. Type
       integer.

       upstream_default value :
           0

SEE ALSO

       •   cme

perl v5.36.0                                       2023-10-13             Config::Model::...::LCDd::picolcd(3pm)