Provided by: libmonitoring-plugin-perl_0.40-1_all 
NAME
Monitoring::Plugin - A family of perl modules to streamline writing Naemon, Nagios, Icinga or Shinken
(and compatible) plugins.
SYNOPSIS
# Constants OK, WARNING, CRITICAL, and UNKNOWN are exported by default
# See also Monitoring::Plugin::Functions for a functional interface
use Monitoring::Plugin;
# Constructor
$np = Monitoring::Plugin->new; # OR
$np = Monitoring::Plugin->new( shortname => "PAGESIZE" ); # OR
# use Monitoring::Plugin::Getopt to process the @ARGV command line options:
# --verbose, --help, --usage, --timeout and --host are defined automatically.
$np = Monitoring::Plugin->new(
usage => "Usage: %s [ -v|--verbose ] [-H <host>] [-t <timeout>] "
. "[ -c|--critical=<threshold> ] [ -w|--warning=<threshold> ]",
);
# add valid command line options and build them into your usage/help documentation.
$np->add_arg(
spec => 'warning|w=s',
help => '-w, --warning=INTEGER:INTEGER . See '
. 'https://www.monitoring-plugins.org/doc/guidelines.html#THRESHOLDFORMAT '
. 'for the threshold format. ',
);
# Parse @ARGV and process standard arguments (e.g. usage, help, version)
$np->getopts;
# Exit/return value methods - plugin_exit( CODE, MESSAGE ),
# plugin_die( MESSAGE, [CODE])
$page = retrieve_page($page1)
or $np->plugin_exit( UNKNOWN, "Could not retrieve page" );
# Return code: 3;
# output: PAGESIZE UNKNOWN - Could not retrieve page
test_page($page)
or $np->plugin_exit( CRITICAL, "Bad page found" );
# plugin_die() is just like plugin_exit(), but return code defaults
# to UNKNOWN
$page = retrieve_page($page2)
or $np->plugin_die( "Could not retrieve page" );
# Return code: 3;
# output: PAGESIZE UNKNOWN - Could not retrieve page
# Threshold methods
$code = $np->check_threshold(
check => $value,
warning => $warning_threshold,
critical => $critical_threshold,
);
$np->plugin_exit( $code, "Threshold check failed" ) if $code != OK;
# Message methods
# add_message( CODE, $message ); check_messages()
for (@collection) {
if (m/Error/) {
$np->add_message( CRITICAL, $_ );
} else {
$np->add_message( OK, $_ );
}
}
($code, $message) = $np->check_messages();
plugin_exit( $code, $message );
# If any items in collection matched m/Error/, returns CRITICAL and
# the joined set of Error messages; otherwise returns OK and the
# joined set of ok messages
# Perfdata methods
$np->add_perfdata(
label => "size",
value => $value,
uom => "kB",
threshold => $threshold,
);
$np->add_perfdata( label => "time", ... );
$np->plugin_exit( OK, "page size at http://... was ${value}kB" );
# Return code: 0;
# output: PAGESIZE OK - page size at http://... was 36kB \
# | size=36kB;10:25;25: time=...
DESCRIPTION
Monitoring::Plugin and its associated Monitoring::Plugin::* modules are a family of perl modules to
streamline writing Monitoring plugins. The main end user modules are Monitoring::Plugin, providing an
object-oriented interface to the entire Monitoring::Plugin::* collection, and
Monitoring::Plugin::Functions, providing a simpler functional interface to a useful subset of the
available functionality.
The purpose of the collection is to make it as simple as possible for developers to create plugins that
conform the Monitoring Plugin guidelines (https://www.monitoring-plugins.org/doc/guidelines.html).
EXPORTS
Nagios status code constants are exported by default:
OK
WARNING
CRITICAL
UNKNOWN
DEPENDENT
The following variables are also exported on request:
%ERRORS
A hash mapping error strings ("CRITICAL", "UNKNOWN", etc.) to the corresponding status code.
%STATUS_TEXT
A hash mapping status code constants (OK, WARNING, CRITICAL, etc.) to the corresponding error string
("OK", "WARNING, "CRITICAL", etc.) i.e. the reverse of %ERRORS.
CONSTRUCTOR
Monitoring::Plugin->new;
Monitoring::Plugin->new( shortname => 'PAGESIZE' );
Monitoring::Plugin->new(
usage => "Usage: %s [ -v|--verbose ] [-H <host>] [-t <timeout>]
[ -c|--critical=<critical threshold> ] [ -w|--warning=<warning threshold> ] ",
version => $VERSION,
blurb => $blurb,
extra => $extra,
url => $url,
license => $license,
plugin => basename $0,
timeout => 15,
);
Instantiates a new Monitoring::Plugin object. Accepts the following named arguments:
shortname
The 'shortname' for this plugin, used as the first token in the plugin output by the various exit
methods. Default: uc basename $0.
usage ("Usage: %s --foo --bar")
Passing a value for the usage() argument makes Monitoring::Plugin instantiate its own
"Monitoring::Plugin::Getopt" object so you can start doing command line argument processing. See
"CONSTRUCTOR" in Monitoring::Plugin::Getopt for more about "usage" and the following options:
version
url
blurb
license
extra
plugin
timeout
GETTER/SETTER
The following internal variables can be retrieved or set by calling a method with the respective name.
Expect for "shortname", don't change values unless you know what you're doing.
Examples:
use Data::Dumper;
print Dumper($plugin->perfdata);
$plugin->shortname('DifferentName');
shortname
perfdata
messages
opts
threshold
OPTION HANDLING METHODS
"Monitoring::Plugin" provides these methods for accessing the functionality in
"Monitoring::Plugin::Getopt".
add_arg
Examples:
# Define --hello argument (named parameters)
$plugin->add_arg(
spec => 'hello=s',
help => "--hello\n Hello string",
required => 1,
);
# Define --hello argument (positional parameters)
# Parameter order is 'spec', 'help', 'default', 'required?'
$plugin->add_arg('hello=s', "--hello\n Hello string", undef, 1);
See "ARGUMENTS" in Monitoring::Plugin::Getopt for more details.
getopts()
Parses and processes the command line options you've defined, automatically doing the right thing
with help/usage/version arguments.
See "GETOPTS" in Monitoring::Plugin::Getopt for more details.
opts()
Assuming you've instantiated it by passing 'usage' to new(), opts() returns the Monitoring::Plugin
object's "Monitoring::Plugin::Getopt" object, with which you can do lots of great things.
E.g.
if ( $plugin->opts->verbose ) {
print "yah yah YAH YAH YAH!!!";
}
# start counting down to timeout
alarm $plugin->opts->timeout;
your_long_check_step_that_might_time_out();
# access any of your custom command line options,
# assuming you've done these steps above:
# $plugin->add_arg('my_argument=s', '--my_argument [STRING]');
# $plugin->getopts;
print $plugin->opts->my_argument;
Again, see Monitoring::Plugin::Getopt.
EXIT METHODS
plugin_exit( <CODE>, $message )
Exit with return code CODE, and a standard nagios message of the form "SHORTNAME CODE - $message".
nagios_exit( <CODE>, $message )
Alias for plugin_exit(). Deprecated.
plugin_die( $message, [<CODE>] )
Same as plugin_exit(), except that CODE is optional, defaulting to UNKNOWN. NOTE: exceptions are not
raised by default to calling code. Set $_use_die flag if this functionality is required (see test
code).
nagios_die( $message, [<CODE>] )
Alias for plugin_die(). Deprecated.
die( $message, [<CODE>] )
Alias for plugin_die(). Deprecated.
max_state, max_state_alt
These are wrapper function for Monitoring::Plugin::Functions::max_state and
Monitoring::Plugin::Functions::max_state_alt.
THRESHOLD METHODS
These provide a top level interface to the "Monitoring::Plugin::Threshold" module; for more details, see
Monitoring::Plugin::Threshold and Monitoring::Plugin::Range.
check_threshold( $value )
check_threshold( check => $value, warning => $warn, critical => $crit )
Evaluates $value against the thresholds and returns OK, CRITICAL, or WARNING constant. The
thresholds may be:
1. explicitly set by passing 'warning' and/or 'critical' parameters to
"check_threshold()", or,
2. explicitly set by calling "set_thresholds()" before "check_threshold()", or,
3. implicitly set by command-line parameters -w, -c, --critical or
--warning, if you have run "$plugin->getopts()".
You can specify $value as an array of values and each will be checked against the thresholds.
The return value is ready to pass to C <plugin_exit>, e . g .,
$p->plugin_exit(
return_code => $p->check_threshold($result),
message => " sample result was $result"
);
set_thresholds(warning => "10:25", critical => "~:25")
Sets the acceptable ranges and creates the plugin's Monitoring::Plugins::Threshold object. See
https://www.monitoring-plugins.org/doc/guidelines.html#THRESHOLDFORMAT for details and examples of
the threshold format.
threshold()
Returns the object's "Monitoring::Plugin::Threshold" object, if it has been defined by calling
set_thresholds(). You can pass a new Threshold object to it to replace the old one too, but you
shouldn't need to do that from a plugin script.
MESSAGE METHODS
add_messages and check_messages are higher-level convenience methods to add and then check a set of
messages, returning an appropriate return code and/or result message. They are equivalent to maintaining
a set of @critical, @warning, and and @ok message arrays (add_message), and then doing a final if test
(check_messages) like this:
if (@critical) {
plugin_exit( CRITICAL, join(' ', @critical) );
}
elsif (@warning) {
plugin_exit( WARNING, join(' ', @warning) );
}
else {
plugin_exit( OK, join(' ', @ok) );
}
add_message( <CODE>, $message )
Add a message with CODE status to the object. May be called multiple times. The messages added are
checked by check_messages, following.
Only CRITICAL, WARNING, and OK are accepted as valid codes.
check_messages()
Check the current set of messages and return an appropriate nagios return code and/or a result
message. In scalar context, returns only a return code; in list context returns both a return code
and an output message, suitable for passing directly to plugin_exit() e.g.
$code = $np->check_messages;
($code, $message) = $np->check_messages;
check_messages returns CRITICAL if any critical messages are found, WARNING if any warning messages
are found, and OK otherwise. The message returned in list context defaults to the joined set of error
messages; this may be customised using the arguments below.
check_messages accepts the following named arguments (none are required):
join => SCALAR
A string used to join the relevant array to generate the message string returned in list context
i.e. if the 'critical' array @crit is non-empty, check_messages would return:
join( $join, @crit )
as the result message. Default: ' ' (space).
join_all => SCALAR
By default, only one set of messages are joined and returned in the result message i.e. if the
result is CRITICAL, only the 'critical' messages are included in the result; if WARNING, only the
'warning' messages are included; if OK, the 'ok' messages are included (if supplied) i.e. the
default is to return an 'errors-only' type message.
If join_all is supplied, however, it will be used as a string to join the resultant critical,
warning, and ok messages together i.e. all messages are joined and returned.
critical => ARRAYREF
Additional critical messages to supplement any passed in via add_message().
warning => ARRAYREF
Additional warning messages to supplement any passed in via add_message().
ok => ARRAYREF | SCALAR
Additional ok messages to supplement any passed in via add_message().
PERFORMANCE DATA METHODS
add_perfdata( label => "size", value => $value, uom => "kB", threshold => $threshold )
Add a set of performance data to the object. May be called multiple times. The performance data is
included in the standard plugin output messages by the various exit methods.
See the Monitoring::Plugin::Performance documentation for more information on performance data and
the various field definitions, as well as the relevant section of the Monitoring Plugin guidelines
(https://www.monitoring-plugins.org/doc/guidelines.html#AEN202).
EXAMPLES
"Enough talk! Show me some examples!"
See the file 'check_stuff.pl' in the 't' directory included with the Monitoring::Plugin distribution for
a complete working example of a plugin script.
VERSIONING
The Monitoring::Plugin::* modules are currently experimental and so the interfaces may change up until
Monitoring::Plugin hits version 1.0, although every attempt will be made to keep them as backwards
compatible as possible.
SEE ALSO
See Monitoring::Plugin::Functions for a simple functional interface to a subset of the available
Monitoring::Plugin functionality.
See also Monitoring::Plugin::Getopt, Monitoring::Plugin::Range, Monitoring::Plugin::Performance,
Monitoring::Plugin::Range, and Monitoring::Plugin::Threshold.
The Monitoring Plugin project page is at http://monitoring-plugins.org.
BUGS
Please report bugs in these modules to the Monitoring Plugin development team:
devel@monitoring-plugins.org.
AUTHOR
Maintained by the Monitoring Plugin development team - https://www.monitoring-plugins.org.
Originally by Ton Voon, <ton.voon@altinity.com>.
COPYRIGHT AND LICENSE
Copyright (C) 2014 by Monitoring Plugin Team Copyright (C) 2006-2014 by Nagios Plugin Development
Team
This library is free software; you can redistribute it and/or modify it under the same terms as Perl
itself, either Perl version 5.8.4 or, at your option, any later version of Perl 5 you may have available.
perl v5.26.2 2018-07-26 Monitoring::Plugin(3pm)