Provided by: libssl-doc_3.0.13-0ubuntu3.5_all 
NAME
SSL_get_ex_data_X509_STORE_CTX_idx, SSL_CTX_set_verify, SSL_set_verify, SSL_CTX_set_verify_depth,
SSL_set_verify_depth, SSL_verify_cb, SSL_verify_client_post_handshake, SSL_set_post_handshake_auth,
SSL_CTX_set_post_handshake_auth - set various SSL/TLS parameters for peer certificate verification
SYNOPSIS
#include <openssl/ssl.h>
typedef int (*SSL_verify_cb)(int preverify_ok, X509_STORE_CTX *x509_ctx);
void SSL_CTX_set_verify(SSL_CTX *ctx, int mode, SSL_verify_cb verify_callback);
void SSL_set_verify(SSL *ssl, int mode, SSL_verify_cb verify_callback);
SSL_get_ex_data_X509_STORE_CTX_idx(void);
void SSL_CTX_set_verify_depth(SSL_CTX *ctx, int depth);
void SSL_set_verify_depth(SSL *ssl, int depth);
int SSL_verify_client_post_handshake(SSL *ssl);
void SSL_CTX_set_post_handshake_auth(SSL_CTX *ctx, int val);
void SSL_set_post_handshake_auth(SSL *ssl, int val);
DESCRIPTION
SSL_CTX_set_verify() sets the verification flags for ctx to be mode and specifies the verify_callback
function to be used. If no callback function shall be specified, the NULL pointer can be used for
verify_callback.
SSL_set_verify() sets the verification flags for ssl to be mode and specifies the verify_callback
function to be used. If no callback function shall be specified, the NULL pointer can be used for
verify_callback. In this case last verify_callback set specifically for this ssl remains. If no special
callback was set before, the default callback for the underlying ctx is used, that was valid at the time
ssl was created with SSL_new(3). Within the callback function, SSL_get_ex_data_X509_STORE_CTX_idx can be
called to get the data index of the current SSL object that is doing the verification.
In client mode verify_callback may also call the SSL_set_retry_verify(3) function on the SSL object set
in the x509_store_ctx ex data (see SSL_get_ex_data_X509_STORE_CTX_idx(3)) and return 1. This would be
typically done in case the certificate verification was not yet able to succeed. This makes the
handshake suspend and return control to the calling application with SSL_ERROR_WANT_RETRY_VERIFY. The
application can for instance fetch further certificates or cert status information needed for the
verification. Calling SSL_connect(3) again resumes the connection attempt by retrying the server
certificate verification step. This process may even be repeated if need be. Note that the handshake
may still be aborted if a subsequent invocation of the callback (e.g., at a lower depth, or for a
separate error condition) returns 0.
SSL_CTX_set_verify_depth() sets the maximum depth for the certificate chain verification that shall be
allowed for ctx.
SSL_set_verify_depth() sets the maximum depth for the certificate chain verification that shall be
allowed for ssl.
SSL_CTX_set_post_handshake_auth() and SSL_set_post_handshake_auth() enable the Post-Handshake
Authentication extension to be added to the ClientHello such that post-handshake authentication can be
requested by the server. If val is 0 then the extension is not sent, otherwise it is. By default the
extension is not sent. A certificate callback will need to be set via SSL_CTX_set_client_cert_cb() if no
certificate is provided at initialization.
SSL_verify_client_post_handshake() causes a CertificateRequest message to be sent by a server on the
given ssl connection. The SSL_VERIFY_PEER flag must be set; the SSL_VERIFY_POST_HANDSHAKE flag is
optional.
NOTES
The verification of certificates can be controlled by a set of logically or'ed mode flags:
SSL_VERIFY_NONE
Server mode: the server will not send a client certificate request to the client, so the client will
not send a certificate.
Client mode: if not using an anonymous cipher (by default disabled), the server will send a
certificate which will be checked. The result of the certificate verification process can be checked
after the TLS/SSL handshake using the SSL_get_verify_result(3) function. The handshake will be
continued regardless of the verification result.
SSL_VERIFY_PEER
Server mode: the server sends a client certificate request to the client. The certificate returned
(if any) is checked. If the verification process fails, the TLS/SSL handshake is immediately
terminated with an alert message containing the reason for the verification failure. The behaviour
can be controlled by the additional SSL_VERIFY_FAIL_IF_NO_PEER_CERT, SSL_VERIFY_CLIENT_ONCE and
SSL_VERIFY_POST_HANDSHAKE flags.
Client mode: the server certificate is verified. If the verification process fails, the TLS/SSL
handshake is immediately terminated with an alert message containing the reason for the verification
failure. If no server certificate is sent, because an anonymous cipher is used, SSL_VERIFY_PEER is
ignored.
SSL_VERIFY_FAIL_IF_NO_PEER_CERT
Server mode: if the client did not return a certificate, the TLS/SSL handshake is immediately
terminated with a "handshake failure" alert. This flag must be used together with SSL_VERIFY_PEER.
Client mode: ignored (see BUGS)
SSL_VERIFY_CLIENT_ONCE
Server mode: only request a client certificate once during the connection. Do not ask for a client
certificate again during renegotiation or post-authentication if a certificate was requested during
the initial handshake. This flag must be used together with SSL_VERIFY_PEER.
Client mode: ignored (see BUGS)
SSL_VERIFY_POST_HANDSHAKE
Server mode: the server will not send a client certificate request during the initial handshake, but
will send the request via SSL_verify_client_post_handshake(). This allows the SSL_CTX or SSL to be
configured for post-handshake peer verification before the handshake occurs. This flag must be used
together with SSL_VERIFY_PEER. TLSv1.3 only; no effect on pre-TLSv1.3 connections.
Client mode: ignored (see BUGS)
If the mode is SSL_VERIFY_NONE none of the other flags may be set.
The actual verification procedure is performed either using the built-in verification procedure or using
another application provided verification function set with SSL_CTX_set_cert_verify_callback(3). The
following descriptions apply in the case of the built-in procedure. An application provided procedure
also has access to the verify depth information and the verify_callback() function, but the way this
information is used may be different.
SSL_CTX_set_verify_depth() and SSL_set_verify_depth() set a limit on the number of certificates between
the end-entity and trust-anchor certificates. Neither the end-entity nor the trust-anchor certificates
count against depth. If the certificate chain needed to reach a trusted issuer is longer than depth+2,
X509_V_ERR_CERT_CHAIN_TOO_LONG will be issued. The depth count is "level 0:peer certificate", "level 1:
CA certificate", "level 2: higher level CA certificate", and so on. Setting the maximum depth to 2 allows
the levels 0, 1, 2 and 3 (0 being the end-entity and 3 the trust-anchor). The default depth limit is
100, allowing for the peer certificate, at most 100 intermediate CA certificates and a final trust anchor
certificate.
The verify_callback function is used to control the behaviour when the SSL_VERIFY_PEER flag is set. It
must be supplied by the application and receives two arguments: preverify_ok indicates, whether the
verification of the certificate in question was passed (preverify_ok=1) or not (preverify_ok=0). x509_ctx
is a pointer to the complete context used for the certificate chain verification.
The certificate chain is checked starting with the deepest nesting level (the root CA certificate) and
worked upward to the peer's certificate. At each level signatures and issuer attributes are checked.
Whenever a verification error is found, the error number is stored in x509_ctx and verify_callback is
called with preverify_ok=0. By applying X509_CTX_store_* functions verify_callback can locate the
certificate in question and perform additional steps (see EXAMPLES). If no error is found for a
certificate, verify_callback is called with preverify_ok=1 before advancing to the next level.
The return value of verify_callback controls the strategy of the further verification process. If
verify_callback returns 0, the verification process is immediately stopped with "verification failed"
state. If SSL_VERIFY_PEER is set, a verification failure alert is sent to the peer and the TLS/SSL
handshake is terminated. If verify_callback returns 1, the verification process is continued. If
verify_callback always returns 1, the TLS/SSL handshake will not be terminated with respect to
verification failures and the connection will be established. The calling process can however retrieve
the error code of the last verification error using SSL_get_verify_result(3) or by maintaining its own
error storage managed by verify_callback.
If no verify_callback is specified, the default callback will be used. Its return value is identical to
preverify_ok, so that any verification failure will lead to a termination of the TLS/SSL handshake with
an alert message, if SSL_VERIFY_PEER is set.
After calling SSL_set_post_handshake_auth(), the client will need to add a certificate or certificate
callback to its configuration before it can successfully authenticate. This must be called before
SSL_connect().
SSL_verify_client_post_handshake() requires that verify flags have been previously set, and that a client
sent the post-handshake authentication extension. When the client returns a certificate the verify
callback will be invoked. A write operation must take place for the Certificate Request to be sent to the
client, this can be done with SSL_do_handshake() or SSL_write_ex(). Only one certificate request may be
outstanding at any time.
When post-handshake authentication occurs, a refreshed NewSessionTicket message is sent to the client.
BUGS
In client mode, it is not checked whether the SSL_VERIFY_PEER flag is set, but whether any flags other
than SSL_VERIFY_NONE are set. This can lead to unexpected behaviour if SSL_VERIFY_PEER and other flags
are not used as required.
RETURN VALUES
The SSL*_set_verify*() functions do not provide diagnostic information.
The SSL_verify_client_post_handshake() function returns 1 if the request succeeded, and 0 if the request
failed. The error stack can be examined to determine the failure reason.
EXAMPLES
The following code sequence realizes an example verify_callback function that will always continue the
TLS/SSL handshake regardless of verification failure, if wished. The callback realizes a verification
depth limit with more informational output.
All verification errors are printed; information about the certificate chain is printed on request. The
example is realized for a server that does allow but not require client certificates.
The example makes use of the ex_data technique to store application data into/retrieve application data
from the SSL structure (see CRYPTO_get_ex_new_index(3), SSL_get_ex_data_X509_STORE_CTX_idx(3)).
...
typedef struct {
int verbose_mode;
int verify_depth;
int always_continue;
} mydata_t;
int mydata_index;
...
static int verify_callback(int preverify_ok, X509_STORE_CTX *ctx)
{
char buf[256];
X509 *err_cert;
int err, depth;
SSL *ssl;
mydata_t *mydata;
err_cert = X509_STORE_CTX_get_current_cert(ctx);
err = X509_STORE_CTX_get_error(ctx);
depth = X509_STORE_CTX_get_error_depth(ctx);
/*
* Retrieve the pointer to the SSL of the connection currently treated
* and the application specific data stored into the SSL object.
*/
ssl = X509_STORE_CTX_get_ex_data(ctx, SSL_get_ex_data_X509_STORE_CTX_idx());
mydata = SSL_get_ex_data(ssl, mydata_index);
X509_NAME_oneline(X509_get_subject_name(err_cert), buf, 256);
/*
* Catch a too long certificate chain. The depth limit set using
* SSL_CTX_set_verify_depth() is by purpose set to "limit+1" so
* that whenever the "depth>verify_depth" condition is met, we
* have violated the limit and want to log this error condition.
* We must do it here, because the CHAIN_TOO_LONG error would not
* be found explicitly; only errors introduced by cutting off the
* additional certificates would be logged.
*/
if (depth > mydata->verify_depth) {
preverify_ok = 0;
err = X509_V_ERR_CERT_CHAIN_TOO_LONG;
X509_STORE_CTX_set_error(ctx, err);
}
if (!preverify_ok) {
printf("verify error:num=%d:%s:depth=%d:%s\n", err,
X509_verify_cert_error_string(err), depth, buf);
} else if (mydata->verbose_mode) {
printf("depth=%d:%s\n", depth, buf);
}
/*
* At this point, err contains the last verification error. We can use
* it for something special
*/
if (!preverify_ok && (err == X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT)) {
X509_NAME_oneline(X509_get_issuer_name(err_cert), buf, 256);
printf("issuer= %s\n", buf);
}
if (mydata->always_continue)
return 1;
else
return preverify_ok;
}
...
mydata_t mydata;
...
mydata_index = SSL_get_ex_new_index(0, "mydata index", NULL, NULL, NULL);
...
SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER | SSL_VERIFY_CLIENT_ONCE,
verify_callback);
/*
* Let the verify_callback catch the verify_depth error so that we get
* an appropriate error in the logfile.
*/
SSL_CTX_set_verify_depth(verify_depth + 1);
/*
* Set up the SSL specific data into "mydata" and store it into th SSL
* structure.
*/
mydata.verify_depth = verify_depth; ...
SSL_set_ex_data(ssl, mydata_index, &mydata);
...
SSL_accept(ssl); /* check of success left out for clarity */
if (peer = SSL_get_peer_certificate(ssl)) {
if (SSL_get_verify_result(ssl) == X509_V_OK) {
/* The client sent a certificate which verified OK */
}
}
SEE ALSO
ssl(7), SSL_new(3), SSL_CTX_get_verify_mode(3), SSL_get_verify_result(3),
SSL_CTX_load_verify_locations(3), SSL_get_peer_certificate(3), SSL_CTX_set_cert_verify_callback(3),
SSL_get_ex_data_X509_STORE_CTX_idx(3), SSL_CTX_set_client_cert_cb(3), CRYPTO_get_ex_new_index(3)
HISTORY
The SSL_VERIFY_POST_HANDSHAKE option, and the SSL_verify_client_post_handshake() and
SSL_set_post_handshake_auth() functions were added in OpenSSL 1.1.1.
COPYRIGHT
Copyright 2000-2022 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance
with the License. You can obtain a copy in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.