Provided by: tcl8.6-doc_8.6.14+dfsg-1build1_all 
NAME
Tcl_CreateTrace, Tcl_CreateObjTrace, Tcl_DeleteTrace - arrange for command execution to be
traced
SYNOPSIS
#include <tcl.h>
Tcl_Trace
Tcl_CreateTrace(interp, level, proc, clientData)
Tcl_Trace
Tcl_CreateObjTrace(interp, level, flags, objProc, clientData, deleteProc)
Tcl_DeleteTrace(interp, trace)
ARGUMENTS
Tcl_Interp *interp (in) Interpreter containing command to be
traced or untraced.
int level (in) Only commands at or below this nesting
level will be traced unless 0 is
specified. 1 means top-level commands
only, 2 means top-level commands or
those that are invoked as immediate
consequences of executing top-level
commands (procedure bodies, bracketed
commands, etc.) and so on. A value of
0 means that commands at any level are
traced.
int flags (in) Flags governing the trace execution.
See below for details.
Tcl_CmdObjTraceProc *objProc (in) Procedure to call for each command
that is executed. See below for
details of the calling sequence.
Tcl_CmdTraceProc *proc (in) Procedure to call for each command
that is executed. See below for
details on the calling sequence.
ClientData clientData (in) Arbitrary one-word value to pass to
objProc or proc.
Tcl_CmdObjTraceDeleteProc *deleteProc (in) Procedure to call when the trace is
deleted. See below for details of the
calling sequence. A NULL pointer is
permissible and results in no callback
when the trace is deleted.
Tcl_Trace trace (in) Token for trace to be removed (return
value from previous call to
Tcl_CreateTrace).
_________________________________________________________________________________________________
DESCRIPTION
Tcl_CreateObjTrace arranges for command tracing. After it is called, objProc will be
invoked before the Tcl interpreter calls any command procedure when evaluating commands in
interp. The return value from Tcl_CreateObjTrace is a token for the trace, which may be
passed to Tcl_DeleteTrace to remove the trace. There may be many traces in effect
simultaneously for the same interpreter.
objProc should have arguments and result that match the type, Tcl_CmdObjTraceProc:
typedef int Tcl_CmdObjTraceProc(
ClientData clientData,
Tcl_Interp* interp,
int level,
const char *command,
Tcl_Command commandToken,
int objc,
Tcl_Obj *const objv[]);
The clientData and interp parameters are copies of the corresponding arguments given to
Tcl_CreateTrace. ClientData typically points to an application-specific data structure
that describes what to do when objProc is invoked. The level parameter gives the nesting
level of the command (1 for top-level commands passed to Tcl_Eval by the application, 2
for the next-level commands passed to Tcl_Eval as part of parsing or interpreting level-1
commands, and so on). The command parameter points to a string containing the text of the
command, before any argument substitution. The commandToken parameter is a Tcl command
token that identifies the command to be invoked. The token may be passed to
Tcl_GetCommandName, Tcl_GetCommandInfoFromToken, or Tcl_SetCommandInfoFromToken to
manipulate the definition of the command. The objc and objv parameters designate the final
parameter count and parameter vector that will be passed to the command, and have had all
substitutions performed.
The objProc callback is expected to return a standard Tcl status return code. If this
code is TCL_OK (the normal case), then the Tcl interpreter will invoke the command. Any
other return code is treated as if the command returned that status, and the command is
not invoked.
The objProc callback must not modify objv in any way.
Tracing will only occur for commands at nesting level less than or equal to the level
parameter (i.e. the level parameter to objProc will always be less than or equal to the
level parameter to Tcl_CreateTrace).
Tracing has a significant effect on runtime performance because it causes the bytecode
compiler to refrain from generating in-line code for Tcl commands such as if and while in
order that they may be traced. If traces for the built-in commands are not required, the
flags parameter may be set to the constant value TCL_ALLOW_INLINE_COMPILATION. In this
case, traces on built-in commands may or may not result in trace callbacks, depending on
the state of the interpreter, but run-time performance will be improved significantly.
(This functionality is desirable, for example, when using Tcl_CreateObjTrace to implement
an execution time profiler.)
Calls to objProc will be made by the Tcl parser immediately before it calls the command
procedure for the command (cmdProc). This occurs after argument parsing and substitution,
so tracing for substituted commands occurs before tracing of the commands containing the
substitutions. If there is a syntax error in a command, or if there is no command
procedure associated with a command name, then no tracing will occur for that command. If
a string passed to Tcl_Eval contains multiple commands (bracketed, or on different lines)
then multiple calls to objProc will occur, one for each command.
Tcl_DeleteTrace removes a trace, so that no future calls will be made to the procedure
associated with the trace. After Tcl_DeleteTrace returns, the caller should never again
use the trace token.
When Tcl_DeleteTrace is called, the interpreter invokes the deleteProc that was passed as
a parameter to Tcl_CreateObjTrace. The deleteProc must match the type,
Tcl_CmdObjTraceDeleteProc:
typedef void Tcl_CmdObjTraceDeleteProc(
ClientData clientData);
The clientData parameter will be the same as the clientData parameter that was originally
passed to Tcl_CreateObjTrace.
Tcl_CreateTrace is an alternative interface for command tracing, not recommended for new
applications. It is provided for backward compatibility with code that was developed for
older versions of the Tcl interpreter. It is similar to Tcl_CreateObjTrace, except that
its proc parameter should have arguments and result that match the type Tcl_CmdTraceProc:
typedef void Tcl_CmdTraceProc(
ClientData clientData,
Tcl_Interp *interp,
int level,
char *command,
Tcl_CmdProc *cmdProc,
ClientData cmdClientData,
int argc,
const char *argv[]);
The parameters to the proc callback are similar to those of the objProc callback above.
The commandToken is replaced with cmdProc, a pointer to the (string-based) command
procedure that will be invoked; and cmdClientData, the client data that will be passed to
the procedure. The objc parameter is replaced with an argv parameter, that gives the
arguments to the command as character strings. Proc must not modify the command or argv
strings.
If a trace created with Tcl_CreateTrace is in effect, inline compilation of Tcl commands
such as if and while is always disabled. There is no notification when a trace created
with Tcl_CreateTrace is deleted. There is no way to be notified when the trace created by
Tcl_CreateTrace is deleted. There is no way for the proc associated with a call to
Tcl_CreateTrace to abort execution of command.
KEYWORDS
command, create, delete, interpreter, trace