Ubuntu Manpage: Tcl_ListObjAppendList, Tcl_ListObjAppendElement, Tcl_NewListObj, Tcl_SetListObj, Tcl

Provided by: tcl8.6-doc_8.6.14+dfsg-1build1_all

NAME

       Tcl_ListObjAppendList,  Tcl_ListObjAppendElement, Tcl_NewListObj, Tcl_SetListObj, Tcl_ListObjGetElements,
       Tcl_ListObjLength, Tcl_ListObjIndex, Tcl_ListObjReplace - manipulate Tcl values as lists

SYNOPSIS

       #include <tcl.h>

       int
       Tcl_ListObjAppendList(interp, listPtr, elemListPtr)

       int
       Tcl_ListObjAppendElement(interp, listPtr, objPtr)

       Tcl_Obj *
       Tcl_NewListObj(objc, objv)

       Tcl_SetListObj(objPtr, objc, objv)

       int
       Tcl_ListObjGetElements(interp, listPtr, objcPtr, objvPtr)

       int
       Tcl_ListObjLength(interp, listPtr, lengthPtr)

       int
       Tcl_ListObjIndex(interp, listPtr, index, objPtrPtr)

       int
       Tcl_ListObjReplace(interp, listPtr, first, count, objc, objv)

ARGUMENTS

Tcl_Interp *interp (in) If an error occurs while converting a value to be a list value,
an error message is left in the interpreter's result value
unless interp is NULL.

Tcl_Obj *listPtr (in/out) Points to the list value to be manipulated. If listPtr does
not already point to a list value, an attempt will be made to
convert it to one.

Tcl_Obj *elemListPtr (in/out) For Tcl_ListObjAppendList, this points to a list value
containing elements to be appended onto listPtr. Each element
of *elemListPtr will become a new element of listPtr. If
*elemListPtr is not NULL and does not already point to a list
value, an attempt will be made to convert it to one.

Tcl_Obj *objPtr (in) For Tcl_ListObjAppendElement, points to the Tcl value that will
be appended to listPtr. For Tcl_SetListObj, this points to the
Tcl value that will be converted to a list value containing the
objc elements of the array referenced by objv.

int *objcPtr (in) Points to location where Tcl_ListObjGetElements stores the
number of element values in listPtr.

Tcl_Obj ***objvPtr (out) A location where Tcl_ListObjGetElements stores a pointer to an
array of pointers to the element values of listPtr.

int objc (in) The number of Tcl values that Tcl_NewListObj will insert into a
new list value, and Tcl_ListObjReplace will insert into
listPtr. For Tcl_SetListObj, the number of Tcl values to
insert into objPtr.

Tcl_Obj *const objv[] (in) An array of pointers to values. Tcl_NewListObj will insert
these values into a new list value and Tcl_ListObjReplace will
insert them into an existing listPtr. Each value will become a
separate list element.

int *lengthPtr (out) Points to location where Tcl_ListObjLength stores the length of
the list.

int index (in) Index of the list element that Tcl_ListObjIndex is to return.
The first element has index 0.

Tcl_Obj **objPtrPtr (out) Points to place where Tcl_ListObjIndex is to store a pointer to
the resulting list element value.

int first (in) Index of the starting list element that Tcl_ListObjReplace is
to replace. The list's first element has index 0.

int count (in) The number of elements that Tcl_ListObjReplace is to replace.
________________________________________________________________________________________________________________

DESCRIPTION

Tcl list values have an internal representation that supports the efficient indexing and appending. The
procedures described in this man page are used to create, modify, index, and append to Tcl list values
from C code.

Tcl_ListObjAppendList and Tcl_ListObjAppendElement both add one or more values to the end of the list
value referenced by listPtr. Tcl_ListObjAppendList appends each element of the list value referenced by
elemListPtr while Tcl_ListObjAppendElement appends the single value referenced by objPtr. Both
procedures will convert the value referenced by listPtr to a list value if necessary. If an error occurs
during conversion, both procedures return TCL_ERROR and leave an error message in the interpreter's
result value if interp is not NULL. Similarly, if elemListPtr does not already refer to a list value,
Tcl_ListObjAppendList will attempt to convert it to one and if an error occurs during conversion, will
return TCL_ERROR and leave an error message in the interpreter's result value if interp is not NULL.
Both procedures invalidate any old string representation of listPtr and, if it was converted to a list
value, free any old internal representation. Similarly, Tcl_ListObjAppendList frees any old internal
representation of elemListPtr if it converts it to a list value. After appending each element in
elemListPtr, Tcl_ListObjAppendList increments the element's reference count since listPtr now also refers
to it. For the same reason, Tcl_ListObjAppendElement increments objPtr's reference count. If no error
occurs, the two procedures return TCL_OK after appending the values.

Tcl_NewListObj and Tcl_SetListObj create a new value or modify an existing value to hold the objc
elements of the array referenced by objv where each element is a pointer to a Tcl value. If objc is less
than or equal to zero, they return an empty value. If objv is NULL, the resulting list contains 0
elements, with reserved space in an internal representation for objc more elements (to avoid its
reallocation later). The new value's string representation is left invalid. The two procedures
increment the reference counts of the elements in objc since the list value now refers to them. The new
list value returned by Tcl_NewListObj has reference count zero.

Tcl_ListObjGetElements returns a count and a pointer to an array of the elements in a list value. It
returns the count by storing it in the address objcPtr. Similarly, it returns the array pointer by
storing it in the address objvPtr. The memory pointed to is managed by Tcl and should not be freed or
written to by the caller. If the list is empty, 0 is stored at objcPtr and NULL at objvPtr. If listPtr
is not already a list value, Tcl_ListObjGetElements will attempt to convert it to one; if the conversion
fails, it returns TCL_ERROR and leaves an error message in the interpreter's result value if interp is
not NULL. Otherwise it returns TCL_OK after storing the count and array pointer.

Tcl_ListObjLength returns the number of elements in the list value referenced by listPtr. It returns
this count by storing an integer in the address lengthPtr. If the value is not already a list value,
Tcl_ListObjLength will attempt to convert it to one; if the conversion fails, it returns TCL_ERROR and
leaves an error message in the interpreter's result value if interp is not NULL. Otherwise it returns
TCL_OK after storing the list's length.

The procedure Tcl_ListObjIndex returns a pointer to the value at element index in the list referenced by
listPtr. It returns this value by storing a pointer to it in the address objPtrPtr. If listPtr does not
already refer to a list value, Tcl_ListObjIndex will attempt to convert it to one; if the conversion
fails, it returns TCL_ERROR and leaves an error message in the interpreter's result value if interp is
not NULL. If the index is out of range, that is, index is negative or greater than or equal to the
number of elements in the list, Tcl_ListObjIndex stores a NULL in objPtrPtr and returns TCL_OK.
Otherwise it returns TCL_OK after storing the element's value pointer. The reference count for the list
element is not incremented; the caller must do that if it needs to retain a pointer to the element.

Tcl_ListObjReplace replaces zero or more elements of the list referenced by listPtr with the objc values
in the array referenced by objv. If listPtr does not point to a list value, Tcl_ListObjReplace will
attempt to convert it to one; if the conversion fails, it returns TCL_ERROR and leaves an error message
in the interpreter's result value if interp is not NULL. Otherwise, it returns TCL_OK after replacing
the values. If objv is NULL, no new elements are added. If the argument first is zero or negative, it
refers to the first element. If first is greater than or equal to the number of elements in the list,
then no elements are deleted; the new elements are appended to the list. count gives the number of
elements to replace. If count is zero or negative then no elements are deleted; the new elements are
simply inserted before the one designated by first. Tcl_ListObjReplace invalidates listPtr's old string
representation. The reference counts of any elements inserted from objv are incremented since the
resulting list now refers to them. Similarly, the reference counts for any replaced values are
decremented.

Because Tcl_ListObjReplace combines both element insertion and deletion, it can be used to implement a
number of list operations. For example, the following code inserts the objc values referenced by the
array of value pointers objv just before the element index of the list referenced by listPtr:

result = Tcl_ListObjReplace(interp, listPtr, index, 0,
objc, objv);

Similarly, the following code appends the objc values referenced by the array objv to the end of the list
listPtr:

result = Tcl_ListObjLength(interp, listPtr, &length);
if (result == TCL_OK) {
result = Tcl_ListObjReplace(interp, listPtr, length, 0,
objc, objv);
}

The count list elements starting at first can be deleted by simply calling Tcl_ListObjReplace with a NULL
objvPtr:

result = Tcl_ListObjReplace(interp, listPtr, first, count,
0, NULL);

KEYWORDS

       append, index, insert, internal representation, length, list, list value, list type, value,  value  type,
       replace, string representation

Tcl                                                    8.0                                     Tcl_ListObj(3tcl)

NAME

SYNOPSIS

ARGUMENTS

DESCRIPTION

SEE ALSO

KEYWORDS