Provided by: libzmq-ffi-perl_1.19-1_all 
NAME
ZMQ::FFI - version agnostic Perl bindings for zeromq using ffi
VERSION
version 1.19
SYNOPSIS
#### send/recv ####
use 5.012;
use ZMQ::FFI qw(ZMQ_REQ ZMQ_REP);
my $endpoint = "ipc://zmq-ffi-$$";
my $ctx = ZMQ::FFI->new();
my $s1 = $ctx->socket(ZMQ_REQ);
$s1->connect($endpoint);
my $s2 = $ctx->socket(ZMQ_REP);
$s2->bind($endpoint);
$s1->send('ohhai');
say $s2->recv();
# ohhai
#### pub/sub ####
use 5.012;
use ZMQ::FFI qw(ZMQ_PUB ZMQ_SUB);
use Time::HiRes q(usleep);
my $endpoint = "ipc://zmq-ffi-$$";
my $ctx = ZMQ::FFI->new();
my $s = $ctx->socket(ZMQ_SUB);
my $p = $ctx->socket(ZMQ_PUB);
$s->connect($endpoint);
$p->bind($endpoint);
# all topics
{
$s->subscribe('');
until ($s->has_pollin) {
# compensate for slow subscriber
usleep 100_000;
$p->send('ohhai');
}
say $s->recv();
# ohhai
$s->unsubscribe('');
}
# specific topics
{
$s->subscribe('topic1');
$s->subscribe('topic2');
until ($s->has_pollin) {
usleep 100_000;
$p->send('topic1 ohhai');
$p->send('topic2 ohhai');
}
while ($s->has_pollin) {
say join ' ', $s->recv();
# topic1 ohhai
# topic2 ohhai
}
}
#### multipart ####
use 5.012;
use ZMQ::FFI qw(ZMQ_DEALER ZMQ_ROUTER);
my $endpoint = "ipc://zmq-ffi-$$";
my $ctx = ZMQ::FFI->new();
my $d = $ctx->socket(ZMQ_DEALER);
$d->set_identity('dealer');
my $r = $ctx->socket(ZMQ_ROUTER);
$d->connect($endpoint);
$r->bind($endpoint);
$d->send_multipart([qw(ABC DEF GHI)]);
say join ' ', $r->recv_multipart;
# dealer ABC DEF GHI
#### nonblocking ####
use 5.012;
use ZMQ::FFI qw(ZMQ_PUSH ZMQ_PULL);
use AnyEvent;
use EV;
my $endpoint = "ipc://zmq-ffi-$$";
my $ctx = ZMQ::FFI->new();
my @messages = qw(foo bar baz);
my $pull = $ctx->socket(ZMQ_PULL);
$pull->bind($endpoint);
my $fd = $pull->get_fd();
my $recv = 0;
my $w = AE::io $fd, 0, sub {
while ( $pull->has_pollin ) {
say $pull->recv();
# foo, bar, baz
$recv++;
if ($recv == 3) {
EV::break();
}
}
};
my $push = $ctx->socket(ZMQ_PUSH);
$push->connect($endpoint);
my $sent = 0;
my $t;
$t = AE::timer 0, .1, sub {
$push->send($messages[$sent]);
$sent++;
if ($sent == 3) {
undef $t;
}
};
EV::run();
#### specifying versions ####
use ZMQ::FFI;
# 2.x context
my $ctx = ZMQ::FFI->new( soname => 'libzmq.so.1' );
my ($major, $minor, $patch) = $ctx->version;
# 3.x context
my $ctx = ZMQ::FFI->new( soname => 'libzmq.so.3' );
my ($major, $minor, $patch) = $ctx->version;
DESCRIPTION
ZMQ::FFI exposes a high level, transparent, OO interface to zeromq independent of the underlying libzmq
version. Where semantics differ, it will dispatch to the appropriate backend for you. As it uses ffi,
there is no dependency on XS or compilation.
As of 1.00 ZMQ::FFI is implemented using FFI::Platypus. This version has substantial performance
improvements and you are encouraged to use 1.00 or newer.
CONTEXT API
new
my $ctx = ZMQ::FFI->new(%options);
returns a new context object, appropriate for the version of libzmq found on your system. It accepts the
following optional attributes:
options
threads
zeromq thread pool size. Default: 1
max_sockets
requires zmq >= 3.x
max number of sockets allowed for context. Default: 1024
soname
ZMQ::FFI->new( soname => '/path/to/libzmq.so' );
ZMQ::FFI->new( soname => 'libzmq.so.3' );
specify the libzmq library name to load. By default ZMQ::FFI will first try the generic soname for
the system, then the soname for each version of zeromq (e.g. libzmq.so.3). "soname" can also be the
path to a particular libzmq so file
It is technically possible to have multiple contexts of different versions in the same process,
though the utility of doing such a thing is dubious
version
my ($major, $minor, $patch) = $ctx->version();
return the libzmq version as the list "($major, $minor, $patch)"
get
requires zmq >= 3.x
my $threads = $ctx->get(ZMQ_IO_THREADS)
get a context option value
set
requires zmq >= 3.x
$ctx->set(ZMQ_MAX_SOCKETS, 42)
set a context option value
socket
my $socket = $ctx->socket(ZMQ_REQ)
returns a socket of the specified type. See "SOCKET API" below
proxy
$ctx->proxy($frontend, $backend);
$ctx->proxy($frontend, $backend, $capture);
sets up and runs a "zmq_proxy". For zmq 2.x this will use a "ZMQ_STREAMER" device to simulate the proxy.
The optional $capture is only supported for zmq >= 3.x however
device
zmq 2.x only
$ctx->device($type, $frontend, $backend);
sets up and runs a "zmq_device" with specified frontend and backend sockets
destroy
destroy the underlying zmq context. In general you shouldn't have to call this directly as it is called
automatically for you when the object gets reaped
See "CLEANUP" below
SOCKET API
The following API is available on socket objects created by "$ctx->socket".
For core attributes and functions, common across all versions of zeromq, convenience methods are
provided. Otherwise, generic get/set methods are provided that will work independent of version.
As attributes are constantly being added/removed from zeromq, it is unlikely the 'static' accessors will
grow much beyond the current set.
version
my ($major, $minor, $patch) = $socket->version();
same as Context "version" above
connect
$socket->connect($endpoint);
does socket connect on the specified endpoint
disconnect
requires zmq >= 3.x
$socket->disconnect($endpoint);
does socket disconnect on the specified endpoint
bind
$socket->bind($endpoint);
does socket bind on the specified endpoint
unbind
requires zmq >= 3.x
$socket->unbind($endpoint);
does socket unbind on the specified endpoint
get_linger, set_linger
my $linger = $socket->get_linger();
$socket->set_linger($millis);
get or set the socket linger period. Default: 0 (no linger)
See "CLEANUP" below
get_identity, set_identity
my $ident = $socket->get_identity();
$socket->set_identity($ident);
get or set the socket identity for request/reply patterns
get_fd
my $fd = $socket->get_fd();
get the file descriptor associated with the socket
get
my $option_value = $socket->get($option_name, $option_type);
my $linger = $socket->get(ZMQ_LINGER, 'int');
generic method to get the value for any socket option. $option_type is the type associated with
$option_value in the zeromq API ("zmq_getsockopt" man page)
set
$socket->set($option_name, $option_type, $option_value);
$socket->set(ZMQ_IDENTITY, 'binary', 'foo');
generic method to set the value for any socket option. $option_type is the type associated with
$option_value in the zeromq API ("zmq_setsockopt" man page)
subscribe
$socket->subscribe($topic);
add $topic to the subscription list
unsubscribe
$socket->unsubscribe($topic);
remove $topic from the subscription list
send
$socket->send($msg);
$socket->send($msg, $flags);
sends a message using the optional flags
send_multipart
$socket->send($parts_aref);
$socket->send($parts_aref, $flags);
given an array ref of message parts, sends the multipart message using the optional flags. ZMQ_SNDMORE
semantics are handled for you
recv
my $msg = $socket->recv();
my $msg = $socket->recv($flags);
receives a message using the optional flags
recv_multipart
my @parts = $socket->recv_multipart();
my @parts = $socket->recv_multipart($flags);
receives a multipart message, returning an array of parts. ZMQ_RCVMORE semantics are handled for you
has_pollin, has_pollout
while ( $socket->has_pollin ) { ... }
checks ZMQ_EVENTS for ZMQ_POLLIN and ZMQ_POLLOUT respectively, and returns true/false depending on the
state
close
close the underlying zmq socket. In general you shouldn't have to call this directly as it is called
automatically for you when the object gets reaped
See "CLEANUP" below
die_on_error
$socket->die_on_error(0);
$socket->die_on_error(1);
controls whether error handling should be exceptional or not. This is set to true by default. See "ERROR
HANDLING" below
has_error
returns true or false depending on whether the last socket operation had an error. This is really just an
alias for "last_errno"
last_errno
returns the system "errno" set by the last socket operation, or 0 if there was no error
last_strerror
returns the human readable system error message associated with the socket "last_errno"
CLEANUP
With respect to cleanup "ZMQ::FFI" follows either the zeromq guide
<http://zguide.zeromq.org/page:all#Making-a-Clean-Exit> recommendations or the behavior of other zmq
bindings. That is:
• it uses 0 linger by default (this is the default used by czmq <https://github.com/zeromq/czmq> and
jzmq <https://github.com/zeromq/jzmq>)
• during object destruction it will call close/destroy for you
• it arranges the reference hierarchy such that sockets will be properly
cleaned up before their associated contexts
• it detects fork/thread situations and ensures sockets/contexts are only
cleaned up in their originating process/thread
• it guards against double closes/destroys
Given the above you're probably better off letting "ZMQ::FFI" handle cleanup for you. But if for some
reason you want to do explicit cleanup yourself you can. All the below will accomplish the same thing:
# implicit cleanup
{
my $context = ZMQ::FFI->new();
my $socket = $ctx->socket($type);
...
# close/destroy called in destructors at end of scope
}
# explicit cleanup
$socket->close();
$context->destroy();
# ditto
undef $socket;
undef $context;
Regarding "linger", you can always set this to a value you prefer if you don't like the default. Once set
the new value will be used when the socket is subsequently closed (either implicitly or explicitly):
$socket->set_linger(-1); # infinite linger
# $context->destroy will block forever
# (or until all pending messages have been sent)
ERROR HANDLING
By default, ZMQ::FFI checks the return codes of underlying zmq functions for you, and in the case of an
error it will die with the human readable system error message.
$ctx->socket(-1);
# dies with 'zmq_socket: Invalid argument'
Usually this is what you want, but not always. Some zmq operations can return errors that are not fatal
and should be handled. For example using "ZMQ_DONTWAIT" with send/recv can return "EAGAIN" and simply
means try again, not die.
For situations such as this you can turn off exceptional error handling by setting "die_on_error" to 0.
It is then for you to check and manage any zmq errors by checking "last_errno":
use Errno qw(EAGAIN);
my $ctx = ZMQ::FFI->new();
my $s = $ctx->socket(ZMQ_DEALER);
$s->bind('tcp://*:7200');
$s->die_on_error(0); # turn off exceptional error handling
while (1) {
my $msg = $s->recv(ZMQ_DONTWAIT);
if ($s->last_errno == EAGAIN) {
sleep 1;
}
elsif ($s->last_errno) {
die $s->last_strerror;
}
else {
warn "recvd: $msg";
last;
}
}
$s->die_on_error(1); # turn back on exceptional error handling
FFI VS XS PERFORMANCE
ZMQ::FFI uses FFI::Platypus on the backend. In addition to a friendly, usable interface, FFI::Platypus's
killer feature is "attach". "attach" makes it possible to bind ffi functions in memory as first class
Perl xsubs. This results in dramatic performance gains and gives you the flexibility of ffi with
performance approaching that of XS.
Testing indicates FFI::Platypus xsubs are around 30% slower than "real" XS xsubs. That may sound like a
lot, but to put it in perspective that means, for zeromq, the XS bindings can send 10 million messages
1-2 seconds faster than the ffi ones.
If you really care about 1-2 seconds over 10 million messages you should be writing your solution in C
anyways. An equivalent C implementation will be several hundred percent faster or more.
Keep in mind also that the small speed bump you get using XS can easily be wiped out by crappy and poorly
optimized Perl code.
Now that Perl finally has a great ffi interface, it is hard to make the case to continue using XS. The
slight speed bump just isn't worth giving up the convenience, flexibility, and portability of ffi.
You can find the detailed performance results that informed this section at:
<https://gist.github.com/calid/17df5bcfb81c83786d6f>
BUGS
"ZMQ::FFI" is free as in beer in addition to being free as in speech. While I've done my best to ensure
it's tasty, high quality beer, it probably isn't perfect. If you encounter problems, or otherwise see
room for improvement, please open an issue (or even better a pull request!) on github
<https://github.com/zeromq/perlzmq>
SEE ALSO
• ZMQ::FFI::Constants
• ZMQ::FFI::Util
• FFI::Platypus
• FFI::Raw
• ZMQ::LibZMQ3
CREDITS
Thank you to the following for patches, bug reports, feedback, or suggestions:
Dave Lambley, Graham Ollis, Klaus Ita, Marc Mims, Parth Gandhi, Pawel Pabian, Robert Hunter, Sergey
KHripchenko, Slaven Rezic, Whitney Jackson, pipcet
AUTHOR
Dylan Cali <calid1984@gmail.com>
COPYRIGHT AND LICENSE
This software is copyright (c) 2023 by Dylan Cali.
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5
programming language system itself.