NAME

       util_delay - <util/delay.h>: Convenience functions for busy-wait delay loops

SYNOPSIS

   Macros
       #define F_CPU   1000000UL

   Functions
       void _delay_ms (double __ms)
       void _delay_us (double __us)

Detailed Description

       #define F_CPU 1000000UL  // 1 MHz
       //#define F_CPU 14.7456E6
       #include <util/delay.h>

       Note
           As an alternative method, it is possible to pass the F_CPU macro down to the compiler from the
           Makefile. Obviously, in that case, no #define statement should be used.

       The functions in this header file are wrappers around the basic busy-wait functions from
       <util/delay_basic.h>. They are meant as convenience functions where actual time values can be specified
       rather than a number of cycles to wait for. The idea behind is that compile-time constant expressions
       will be eliminated by compiler optimization so floating-point expressions can be used to calculate the
       number of delay cycles needed based on the CPU frequency passed by the macro F_CPU.

       Note
           In order for these functions to work as intended, compiler optimizations must be enabled, and the
           delay time must be an expression that is a known constant at compile-time. If these requirements are
           not met, the resulting delay will be much longer (and basically unpredictable), and applications that
           otherwise do not use floating-point calculations will experience severe code bloat by the floating-
           point library routines linked into the application.

       The functions available allow the specification of microsecond, and millisecond delays directly, using
       the application-supplied macro F_CPU as the CPU clock frequency (in Hertz).

Macro Definition Documentation

   #define F_CPU   1000000UL
       CPU frequency in Hz. The macro F_CPU specifies the CPU frequency to be considered by the delay macros.
       This macro is normally supplied by the environment (e.g. from within a project header, or the project's
       Makefile). The value 1 MHz here is only provided as a 'vanilla' fallback if no such user-provided
       definition could be found.

       In terms of the delay functions, the CPU frequency can be given as a floating-point constant (e.g.
       3.6864E6 for 3.6864 MHz). However, the macros in <util/setbaud.h> require it to be an integer value.

Function Documentation

   void _delay_ms (double __ms)
       Perform a delay of __ms milliseconds, using _delay_loop_2().

       The macro F_CPU is supposed to be defined to a constant defining the CPU clock frequency (in Hertz).

       The maximal possible delay is 262.14 ms / F_CPU in MHz.

       When the user request delay which exceed the maximum possible one, _delay_ms() provides a decreased
       resolution functionality. In this mode _delay_ms() will work with a resolution of 1/10 ms, providing
       delays up to 6.5535 seconds (independent from CPU frequency). The user will not be informed about
       decreased resolution.

       If the avr-gcc toolchain has __builtin_avr_delay_cycles() support, maximal possible delay is 4294967.295
       ms/ F_CPU in MHz. For values greater than the maximal possible delay, overflows results in no delay i.e.,
       0ms.

       Conversion of __ms into clock cycles may not always result in integer. By default, the clock cycles
       rounded up to next integer. This ensures that the user gets at least __ms microseconds of delay.

       Alternatively, by defining the macro __DELAY_ROUND_DOWN__, or __DELAY_ROUND_CLOSEST__, before including
       this header file, the algorithm can be made to round down, or round to closest integer, respectively.

       Note

       The implementation of _delay_ms() based on __builtin_avr_delay_cycles() is not backward compatible with
       older implementations. In order to get functionality backward compatible with previous versions, the
       macro '__DELAY_BACKWARD_COMPATIBLE__' must be defined before including this header file. Also, the
       backward compatible algorithm will be chosen if the code is compiled in a freestanding environment (GCC
       option -ffreestanding), as the math functions required for rounding are not available to the compiler
       then.

   void _delay_us (double __us)
       Perform a delay of __us microseconds, using _delay_loop_1().

       The macro F_CPU is supposed to be defined to a constant defining the CPU clock frequency (in Hertz).

       The maximal possible delay is 768 us / F_CPU in MHz.

       If the user requests a delay greater than the maximal possible one, _delay_us() will automatically call
       _delay_ms() instead. The user will not be informed about this case.

       If the avr-gcc toolchain has __builtin_avr_delay_cycles() support, maximal possible delay is 4294967.295
       us/ F_CPU in MHz. For values greater than the maximal possible delay, overflow results in no delay i.e.,
       0us.

       Conversion of __us into clock cycles may not always result in integer. By default, the clock cycles
       rounded up to next integer. This ensures that the user gets at least __us microseconds of delay.

       Alternatively, by defining the macro __DELAY_ROUND_DOWN__, or __DELAY_ROUND_CLOSEST__, before including
       this header file, the algorithm can be made to round down, or round to closest integer, respectively.

       Note

       The implementation of _delay_ms() based on __builtin_avr_delay_cycles() is not backward compatible with
       older implementations. In order to get functionality backward compatible with previous versions, the
       macro __DELAY_BACKWARD_COMPATIBLE__ must be defined before including this header file. Also, the backward
       compatible algorithm will be chosen if the code is compiled in a freestanding environment (GCC option
       -ffreestanding), as the math functions required for rounding are not available to the compiler then.

Author

       Generated automatically by Doxygen for avr-libc from the source code.