Provided by: blt-dev_2.5.3+dfsg-7build1_amd64 
NAME
drag&drop - facilities for handling drag&drop data transfers
SYNOPSIS
drag&drop source
drag&drop source window ?options?
drag&drop source window handler ?dataType? ?command arg arg...?
drag&drop target
drag&drop target window handler ?dataType command arg arg...?
drag&drop target window handle dataType ?value?
drag&drop token window
drag&drop drag window x y
drag&drop drop window x y
drag&drop active
drag&drop errors ?proc?
drag&drop location ?x y?
_________________________________________________________________
DESCRIPTION
The drag&drop command provides access to a set of facilities for managing drag-and-drop data transfers.
Any of the usual Tk widgets can be registered to participate in the drag-and-drop process. Widgets
registered as a drag&drop source can export data to other widgets registered as a drag&drop target. Note
that a particular widget can be registered as a source, as a target, or as both.
The drag-and-drop process begins when the user clicks and holds a mouse button in a source window; a
token window appears with an icon or message to represent the data being transferred. As the user moves
the mouse pointer, the token window follows along, acting as a movable packet of data. Whenever the
mouse pointer falls on a valid target window, the border of the token window is changed to a raised
(active) state. When the mouse button is released over the target window, a Tcl routine is invoked to
send the data to the desired application, and the target window is asked to "handle" the data. If this
communication process fails, a rejection symbol (a circle with a line through it) is displayed on the
token window to indicate failure.
The details of the communication process are fully configurable by the application developer. In the
simplest case, the value that is sent to the target window is a simple string. The target window is
simply asked to "handle" that string value. In general, the source window can have a special "handler"
procedure to transfer a particular data type by issuing a series of "send" commands. After this, the
target window is again asked to "handle" the result.
Both sources and targets can have a list of "handlers" for different data types. As a token window is
dragged from its source to various targets, each target is checked to see if it recognizes a handler
offered by the source. If it does, it is treated as a valid target. Otherwise, it is ignored. This
scheme allows the same source to interact with many different kinds of targets. For example, a source
for RGB color samples might have "color" and "string" handlers. This would allow it to communicate with
"color" targets (sending RGB data) as well as entry widgets (sending strings of the form "#rrggbb").
This introduction was presented as a brief overview of the communication process; further details are
presented below:
drag&drop source
Returns a list of path names for widgets registered as drag&drop sources. Returns an empty string
if no widgets have been registered.
drag&drop source window ?options?
Registers a new drag&drop source window with the given options, or modifies the options for an
existing window:
Name: buttonBinding
Class: ButtonBinding
Switch: -button n
Specifies the mouse button (integer 1-5) that will invoke the drag&drop operation on the
source window. This causes the following bindings to be added to the widget:
bind win <ButtonPress-n> {drag&drop drag %W %X %Y}
bind win <Bn-Motion> {drag&drop drag %W %X %Y}
bind win <ButtonRelease-n> {drag&drop drop %W %X %Y}
The default value is button 3. If the value "0" is specified, then no bindings are added; this
enables the user to establish bindings manually.
Name: packageCommand
Class: Command
Switch: -packagecmd command
Specifies a Tcl command used to establish the appearance of the token window at the start
of each drag&drop operation. This command is automatically invoked by the drag&drop drag
command whenever the token window is about to be mapped for a drag operation. It should
update the appearance of the token window to represent the data that is being moved.
The following substitutions are made in the command string before it is executed:
%t Replaced with the window path name for the token which represents the data being
dragged.
%W Replaced with the window path name for the drag&drop source.
The return value from the package command represents the data being transferred. If the package
command returns an empty string, the drag operation is quietly aborted. This can be used to
disallow drag&drop operations from certain parts of a widget, if the drag position is
inappropriate.
For example, the following package routine will select an item from a listbox and configure the
token window to display the selected string. It uses the drag&drop location command to determine
the entry in the listbox that the user has selected and it returns this as the data value:
proc package_list_item {lbox token} {
set xy [drag&drop location]
set y [expr [lindex $xy 1]-[winfo rooty $lbox]]
set str [$lbox get [$lbox nearest $y]]
$token.value configure -text $str
return $str
}
The return value is available later when the source and target communicate. If the source has a
command associated with its data handler, then this value is substituted in place of "%v" in the
source handler. Otherwise, it is substituted in place of "%v" in the target handler.
Name: rejectBackground
Class: Background
Switch: -rejectbg color
Specifies the color used to draw the background of the rejection symbol on the token
window. The rejection symbol (a circle with a line through it--the international "no")
appears whenever communication fails.
Name: rejectForeground
Class: Foreground
Switch: -rejectfg color
Specifies the color used to draw the foreground of the rejection symbol on the token
window.
Name: rejectStipple
Class: Stipple
Switch: -rejectstipple pattern
Specifies a stipple pattern used to draw the foreground of the rejection symbol on the
token window. Any of the forms acceptable to Tk_GetBitmap can be used.
Name: selfTarget
Class: SelfTarget
Switch: -selftarget boolean
If the boolean value is true, and if a source widget is also registered as a compatible
target, then the source will be able to transmit to itself during drag&drop operations.
This is primarily useful for complex sources such as a canvas widget, where items may be
moved from place to place within the same widget. By default, this option is disabled.
Name: send
Class: Send
Switch: -send list
Specifies a list of dataTypes enabled for communication. Only dataTypes defined by
commands of the form "drag&drop source window handler ?dataType ?command arg arg...?" are
allowed. This list also determines the priority of the various dataTypes. When a token
window is over a potential drag&drop target, this list is searched from start to finish for
a dataType that is also recognized by the target. The first matching dataType found
determines the value that will be sent if the token is dropped. If no matching dataType is
found, then the target is incompatible, and is ignored. By default, this option has the
value "all", indicating that all dataTypes should be considered in the order that they were
defined for the source.
Note that this option makes it easy to control a drag&drop source. Setting the value to an empty
string disables the source; setting the value back to "all" restores communication.
Name: siteCommand
Class: Command
Switch: -sitecmd command
Specifies a Tcl command used to update the appearance of the token window. If specified,
this command is automatically invoked by the drag&drop drag command whenever the token
window is over a compatible drag&drop target.
The following substitutions are made in the command string before it is executed:
%s Replaced with "1" if the token window is over a compatible target, and "0"
otherwise.
%t Replaced with the window path name for the token which represents the data being
dragged.
Regardless of this command, border of the token window will become raised whenever the token is
over a valid target. This command can be used to display other visual cues.
Name: tokenAnchor
Class: Anchor
Switch: -tokenanchor anchor
Specifies how the token window is positioned relative to the mouse pointer coordinates
passed to the drag&drop drag command. Must be one of the values n, s, e, w, center, nw,
ne, sw or se. For example, "nw" means to position the token such that its upper-left
corner is at the mouse pointer. The default value is "center".
Name: tokenBackground
Class: Background
Switch: -tokenbg color
Specifies the color used to draw the background of the token window.
Name: tokenBorderWidth
Class: BorderWidth
Switch: -tokenborderwidth size
Specifies the width in pixels of the border around the token window. This border becomes
raised to indicate when the token is over a compatible drag&drop target site. The value
may have any of the forms acceptable to Tk_GetPixels. The default value is "3".
Name: tokenCursor
Class: Cursor
Switch: -tokencursor cursor
Specifies the cursor used when a token window is active. The value may have any of the
forms acceptable to Tk_GetCursor. The default value is "center_ptr".
drag&drop source window handler ?dataType? ?command arg arg...?
With no extra arguments, this command returns a list of all dataType names that have been
registered for the source window. If only the dataType is specified, then the dataType is created
if necessary, and the command associated with the dataType is returned. Otherwise, it
concatenates the command and any extra arg strings, and registers a new dataType with this
command.
The following substitutions are made in the command string before it is executed:
%i Replaced with the name of the interpreter for the target application.
%v Replaced with the value returned from the "-packagecmd" command.
%w Replaced with the window path name for the target window.
A typical source handler contains one or more "send" commands which transfer data to the remote
application. The target window is then asked to handle the new data. Whatever value is returned by the
source command handler is automatically substituted into the "%v" fields of the target handler.
This separation between the transfer and the handling of the data is important. It allows the same
source handler to transfer data for many different targets, and it allows each of the targets to handle
the incoming data differently. If an error is encountered during the communication process, the
rejection symbol is posted on the token window to indicate failure.
drag&drop target
Returns a list of path names for widgets registered as drag&drop targets. Returns an empty string
if no widgets have been registered.
drag&drop target window handler ?dataType command arg arg...?
Registers a new drag&drop target window with a given handler, or modifies the handlers for an
existing window. If no dataType is specified, this command returns the current list of recognized
dataType strings. Each dataType is a symbolic name representing a form of data, and the
corresponding command is a Tcl command that specifies how the target will make use of the data.
This command is invoked indirectly after a source has transferred data to a target application.
The following substitutions are made in the command string before it is executed:
%v In the simplest case, the source window does not have a handler command for the selected
dataType, and this field is replaced with the result from the "-packagecmd" command. When
the source does have a handler command, the result from the "-packagecmd" command is
substituted into its "%v" field, and the result from this command is substituted into this
field in the target command.
%W Replaced with the window path name for the target window.
drag&drop target window handle dataType ?value?
Searches for the given dataType name among the handlers registered for the target window, and
invokes the appropriate command. If a value is specified, it is substituted into any "%v" fields
in the handler command associated with the dataType. If the dataType name is not recognized, this
command returns an error. This command is invoked automatically by the drag&drop facility when
data is being transferred from a source to a target.
drag&drop token window
Returns the token window associated with a drag&drop source window. The token window is used to
represent data as it is being dragged from the source to a target. When a source is first
established, its token window must be filled with widgets to display the source data. For
example,
drag&drop source .foo
set win [drag&drop token .foo]
label $win.label -text "Data"
pack $win.label
drag&drop drag window x y
Marks the start of (or movement during) a drag&drop operation. If the token window is unmapped
when this command is invoked, then the -packagecmd for the source window is executed. If this
command is successful and returns a non-null string, the token window is mapped. On subsequent
calls, the token window is moved to the new x y location. Unless the "-button 0" option is
specified for the source, this command is automatically bound to <ButtonPress-n> and <Bn-Motion>
events for "-button n" of the source widget.
drag&drop drop window x y
Marks the end of a drag&drop operation. If the mouse pointer is over a compatible target window,
then the appropriate send handler for the first compatible dataType is invoked to handle the data
transfer. If the data transfer is successful, then the token window is unmapped; otherwise, a
rejection symbol is drawn on the token window, and the window is unmapped after a small delay.
Unless the "-button 0" option is specified for the source, this command is automatically bound to
the <ButtonRelease-n> event for "-button n" of the source widget.
drag&drop active
Returns "1" if a drag&drop operation is in progress, and "0" otherwise. A drag&drop operation
officially starts after the package command has been executed successfully, and ends after the
send handler has been executed (successfully or otherwise).
drag&drop errors ?proc?
Specifies a Tcl proc used to handle errors encountered during drag&drop operations. If a proc is
not specified, this command returns the current error handler. By default, all errors are sent to
the usual tkerror command, and therefore appear in a dialog box to the user. This behavior is
quite useful when debugging communication protocols, but may not be desirable in a finished
application. Errors can be suppressed entirely (leaving the rejection symbol as the only error
indicator) by specifying a null string in place of the proc name.
drag&drop location ?x y?
Used to set or query the pointer location during a drag&drop operation. The x y arguments specify
the current location; if these arguments are missing, then the last reported (x,y) location is
returned as a list with two elements. This command is issued automatically within the drag&drop
drag and drag&drop drop commands, to keep track of pointer movement.
KEYWORDS
drag&drop, send, bind, widget