Provided by: libfabric-dev_1.17.0-3build2_amd64 
NAME
fi_collective - Collective operations
fi_join_collective
Operation where a subset of peers join a new collective group.
fi_barrier / fi_barrier2
Collective operation that does not complete until all peers have entered the
barrier call.
fi_broadcast
A single sender transmits data to all peers, including itself.
fi_alltoall
Each peer distributes a slice of its local data to all peers.
fi_allreduce
Collective operation where all peers broadcast an atomic operation to all other
peers.
fi_allgather
Each peer sends a complete copy of its local data to all peers.
fi_reduce_scatter
Collective call where data is collected from all peers and merged (reduced). The
results of the reduction is distributed back to the peers, with each peer receiving
a slice of the results.
fi_reduce
Collective call where data is collected from all peers to a root peer and merged
(reduced).
fi_scatter
A single sender distributes (scatters) a slice of its local data to all peers.
fi_gather
All peers send their data to a root peer.
fi_query_collective
Returns information about which collective operations are supported by a provider,
and limitations on the collective.
SYNOPSIS
#include <rdma/fi_collective.h>
int fi_join_collective(struct fid_ep *ep, fi_addr_t coll_addr,
const struct fid_av_set *set,
uint64_t flags, struct fid_mc **mc, void *context);
ssize_t fi_barrier(struct fid_ep *ep, fi_addr_t coll_addr,
void *context);
ssize_t fi_barrier2(struct fid_ep *ep, fi_addr_t coll_addr,
uint64_t flags, void *context);
ssize_t fi_broadcast(struct fid_ep *ep, void *buf, size_t count, void *desc,
fi_addr_t coll_addr, fi_addr_t root_addr, enum fi_datatype datatype,
uint64_t flags, void *context);
ssize_t fi_alltoall(struct fid_ep *ep, const void *buf, size_t count,
void *desc, void *result, void *result_desc,
fi_addr_t coll_addr, enum fi_datatype datatype,
uint64_t flags, void *context);
ssize_t fi_allreduce(struct fid_ep *ep, const void *buf, size_t count,
void *desc, void *result, void *result_desc,
fi_addr_t coll_addr, enum fi_datatype datatype, enum fi_op op,
uint64_t flags, void *context);
ssize_t fi_allgather(struct fid_ep *ep, const void *buf, size_t count,
void *desc, void *result, void *result_desc,
fi_addr_t coll_addr, enum fi_datatype datatype,
uint64_t flags, void *context);
ssize_t fi_reduce_scatter(struct fid_ep *ep, const void *buf, size_t count,
void *desc, void *result, void *result_desc,
fi_addr_t coll_addr, enum fi_datatype datatype, enum fi_op op,
uint64_t flags, void *context);
ssize_t fi_reduce(struct fid_ep *ep, const void *buf, size_t count,
void *desc, void *result, void *result_desc, fi_addr_t coll_addr,
fi_addr_t root_addr, enum fi_datatype datatype, enum fi_op op,
uint64_t flags, void *context);
ssize_t fi_scatter(struct fid_ep *ep, const void *buf, size_t count,
void *desc, void *result, void *result_desc, fi_addr_t coll_addr,
fi_addr_t root_addr, enum fi_datatype datatype,
uint64_t flags, void *context);
ssize_t fi_gather(struct fid_ep *ep, const void *buf, size_t count,
void *desc, void *result, void *result_desc, fi_addr_t coll_addr,
fi_addr_t root_addr, enum fi_datatype datatype,
uint64_t flags, void *context);
int fi_query_collective(struct fid_domain *domain,
fi_collective_op coll, struct fi_collective_attr *attr, uint64_t flags);
ARGUMENTS
ep Fabric endpoint on which to initiate collective operation.
set Address vector set defining the collective membership.
mc Multicast group associated with the collective.
buf Local data buffer that specifies first operand of collective operation
datatype
Datatype associated with atomic operands
op Atomic operation to perform
result Local data buffer to store the result of the collective operation.
desc / result_desc
Data descriptor associated with the local data buffer and local result buffer,
respectively.
coll_addr
Address referring to the collective group of endpoints.
root_addr
Single endpoint that is the source or destination of collective data.
flags Additional flags to apply for the atomic operation
context
User specified pointer to associate with the operation. This parameter is ignored
if the operation will not generate a successful completion, unless an op flag
specifies the context parameter be used for required input.
DESCRIPTION (EXPERIMENTAL APIs)
The collective APIs are new to the 1.9 libfabric release. Although, efforts have been
made to design the APIs such that they align well with applications and are implementable
by the providers, the APIs should be considered experimental and may be subject to change
in future versions of the library until the experimental tag has been removed.
In general collective operations can be thought of as coordinated atomic operations
between a set of peer endpoints. Readers should refer to the fi_atomic(3) man page for
details on the atomic operations and datatypes defined by libfabric.
A collective operation is a group communication exchange. It involves multiple peers
exchanging data with other peers participating in the collective call. Collective
operations require close coordination by all participating members. All participants must
invoke the same collective call before any single member can complete its operation
locally. As a result, collective calls can strain the fabric, as well as local and remote
data buffers.
Libfabric collective interfaces target fabrics that support offloading portions of the
collective communication into network switches, NICs, and other devices. However, no
implementation requirement is placed on the provider.
The first step in using a collective call is identifying the peer endpoints that will
participate. Collective membership follows one of two models, both supported by
libfabric. In the first model, the application manages the membership. This usually
means that the application is performing a collective operation itself using point to
point communication to identify the members who will participate. Additionally, the
application may be interacting with a fabric resource manager to reserve network resources
needed to execute collective operations. In this model, the application will inform
libfabric that the membership has already been established.
A separate model moves the membership management under libfabric and directly into the
provider. In this model, the application must identify which peer addresses will be
members. That information is conveyed to the libfabric provider, which is then
responsible for coordinating the creation of the collective group. In the provider
managed model, the provider will usually perform the necessary collective operation to
establish the communication group and interact with any fabric management agents.
In both models, the collective membership is communicated to the provider by creating and
configuring an address vector set (AV set). An AV set represents an ordered subset of
addresses in an address vector (AV). Details on creating and configuring an AV set are
available in fi_av_set(3).
Once an AV set has been programmed with the collective membership information, an endpoint
is joined to the set. This uses the fi_join_collective operation and operates
asynchronously. This differs from how an endpoint is associated synchronously with an AV
using the fi_ep_bind() call. Upon completion of the fi_join_collective operation, an
fi_addr is provided that is used as the target address when invoking a collective
operation.
For developer convenience, a set of collective APIs are defined. Collective APIs differ
from message and RMA interfaces in that the format of the data is known to the provider,
and the collective may perform an operation on that data. This aligns collective
operations closely with the atomic interfaces.
Join Collective (fi_join_collective)
This call attaches an endpoint to a collective membership group. Libfabric treats
collective members as a multicast group, and the fi_join_collective call attaches the
endpoint to that multicast group. By default, the endpoint will join the group based on
the data transfer capabilities of the endpoint. For example, if the endpoint has been
configured to both send and receive data, then the endpoint will be able to initiate and
receive transfers to and from the collective. The input flags may be used to restrict
access to the collective group, subject to endpoint capability limitations.
Join collective operations complete asynchronously, and may involve fabric transfers,
dependent on the provider implementation. An endpoint must be bound to an event queue
prior to calling fi_join_collective. The result of the join operation will be reported to
the EQ as an FI_JOIN_COMPLETE event. Applications cannot issue collective transfers until
receiving notification that the join operation has completed. Note that an endpoint may
begin receiving messages from the collective group as soon as the join completes, which
can occur prior to the FI_JOIN_COMPLETE event being generated.
The join collective operation is itself a collective operation. All participating peers
must call fi_join_collective before any individual peer will report that the join has
completed. Application managed collective memberships are an exception. With application
managed memberships, the fi_join_collective call may be completed locally without fabric
communication. For provider managed memberships, the join collective call requires as
input a coll_addr that refers to either an address associated with an AV set (see
fi_av_set_addr) or an existing collective group (obtained through a previous call to
fi_join_collective). The fi_join_collective call will create a new collective subgroup.
If application managed memberships are used, coll_addr should be set to FI_ADDR_UNAVAIL.
Applications must call fi_close on the collective group to disconnect the endpoint from
the group. After a join operation has completed, the fi_mc_addr call may be used to
retrieve the address associated with the multicast group. See fi_cm(3) for additional
details on fi_mc_addr().
Barrier (fi_barrier)
The fi_barrier operation provides a mechanism to synchronize peers. Barrier does not
result in any data being transferred at the application level. A barrier does not
complete locally until all peers have invoked the barrier call. This signifies to the
local application that work by peers that completed prior to them calling barrier has
finished.
Barrier (fi_barrier2)
The fi_barrier2 operations is the same as fi_barrier, but with an extra parameter to pass
in operation flags.
Broadcast (fi_broadcast)
fi_broadcast transfers an array of data from a single sender to all other members of the
collective group. The input buf parameter is treated as the transmit buffer if the local
rank is the root, otherwise it is the receive buffer. The broadcast operation acts as an
atomic write or read to a data array. As a result, the format of the data in buf is
specified through the datatype parameter. Any non-void datatype may be broadcast.
The following diagram shows an example of broadcast being used to transfer an array of
integers to a group of peers.
[1] [1] [1]
[5] [5] [5]
[9] [9] [9]
|____^ ^
|_________|
broadcast
All to All (fi_alltoall)
The fi_alltoall collective involves distributing (or scattering) different portions of an
array of data to peers. It is best explained using an example. Here three peers perform
an all to all collective to exchange different entries in an integer array.
[1] [2] [3]
[5] [6] [7]
[9] [10] [11]
\ | /
All to all
/ | \
[1] [5] [9]
[2] [6] [10]
[3] [7] [11]
Each peer sends a piece of its data to the other peers.
All to all operations may be performed on any non-void datatype. However, all to all does
not perform an operation on the data itself, so no operation is specified.
All Reduce (fi_allreduce)
fi_allreduce can be described as all peers providing input into an atomic operation, with
the result copied back to each peer. Conceptually, this can be viewed as each peer
issuing a multicast atomic operation to all other peers, fetching the results, and
combining them. The combining of the results is referred to as the reduction. The
fi_allreduce() operation takes as input an array of data and the specified atomic
operation to perform. The results of the reduction are written into the result buffer.
Any non-void datatype may be specified. Valid atomic operations are listed below in the
fi_query_collective call. The following diagram shows an example of an all reduce
operation involving summing an array of integers between three peers.
[1] [1] [1]
[5] [5] [5]
[9] [9] [9]
\ | /
sum
/ | \
[3] [3] [3]
[15] [15] [15]
[27] [27] [27]
All Reduce
All Gather (fi_allgather)
Conceptually, all gather can be viewed as the opposite of the scatter component from
reduce-scatter. All gather collects data from all peers into a single array, then copies
that array back to each peer.
[1] [5] [9]
\ | /
All gather
/ | \
[1] [1] [1]
[5] [5] [5]
[9] [9] [9]
All gather may be performed on any non-void datatype. However, all gather does not
perform an operation on the data itself, so no operation is specified.
Reduce-Scatter (fi_reduce_scatter)
The fi_reduce_scatter collective is similar to an fi_allreduce operation, followed by all
to all. With reduce scatter, all peers provide input into an atomic operation, similar to
all reduce. However, rather than the full result being copied to each peer, each
participant receives only a slice of the result.
This is shown by the following example:
[1] [1] [1]
[5] [5] [5]
[9] [9] [9]
\ | /
sum (reduce)
|
[3]
[15]
[27]
|
scatter
/ | \
[3] [15] [27]
The reduce scatter call supports the same datatype and atomic operation as fi_allreduce.
Reduce (fi_reduce)
The fi_reduce collective is the first half of an fi_allreduce operation. With reduce, all
peers provide input into an atomic operation, with the the results collected by a single
`root' endpoint.
This is shown by the following example, with the leftmost peer identified as the root:
[1] [1] [1]
[5] [5] [5]
[9] [9] [9]
\ | /
sum (reduce)
/
[3]
[15]
[27]
The reduce call supports the same datatype and atomic operation as fi_allreduce.
Scatter (fi_scatter)
The fi_scatter collective is the second half of an fi_reduce_scatter operation. The data
from a single `root' endpoint is split and distributed to all peers.
This is shown by the following example:
[3]
[15]
[27]
\
scatter
/ | \
[3] [15] [27]
The scatter operation is used to distribute results to the peers. No atomic operation is
performed on the data.
Gather (fi_gather)
The fi_gather operation is used to collect (gather) the results from all peers and store
them at a `root' peer.
This is shown by the following example, with the leftmost peer identified as the root.
[1] [5] [9]
\ | /
gather
/
[1]
[5]
[9]
The gather operation does not perform any operation on the data itself.
Query Collective Attributes (fi_query_collective)
The fi_query_collective call reports which collective operations are supported by the
underlying provider, for suitably configured endpoints. Collective operations needed by
an application that are not supported by the provider must be implemented by the
application. The query call checks whether a provider supports a specific collective
operation for a given datatype and operation, if applicable.
The name of the collective, as well as the datatype and associated operation, if
applicable, and are provided as input into fi_query_collective.
The coll parameter may reference one of these collectives: FI_BARRIER, FI_BROADCAST,
FI_ALLTOALL, FI_ALLREDUCE, FI_ALLGATHER, FI_REDUCE_SCATTER, FI_REDUCE, FI_SCATTER, or
FI_GATHER. Additional details on the collective operation is specified through the struct
fi_collective_attr parameter. For collectives that act on data, the operation and related
data type must be specified through the given attributes.
struct fi_collective_attr {
enum fi_op op;
enum fi_datatype datatype;
struct fi_atomic_attr datatype_attr;
size_t max_members;
uint64_t mode;
};
For a description of struct fi_atomic_attr, see fi_atomic(3).
op On input, this specifies the atomic operation involved with the collective call.
This should be set to one of the following values: FI_MIN, FI_MAX, FI_SUM, FI_PROD,
FI_LOR, FI_LAND, FI_BOR, FI_BAND, FI_LXOR, FI_BXOR, FI_ATOMIC_READ,
FI_ATOMIC_WRITE, of FI_NOOP. For collectives that do not exchange application data
(fi_barrier), this should be set to FI_NOOP.
datatype
On onput, specifies the datatype of the data being modified by the collective.
This should be set to one of the following values: FI_INT8, FI_UINT8, FI_INT16,
FI_UINT16, FI_INT32, FI_UINT32, FI_INT64, FI_UINT64, FI_FLOAT, FI_DOUBLE,
FI_FLOAT_COMPLEX, FI_DOUBLE_COMPLEX, FI_LONG_DOUBLE, FI_LONG_DOUBLE_COMPLEX, or
FI_VOID. For collectives that do not exchange application data (fi_barrier), this
should be set to FI_VOID.
datatype_attr.count
The maximum number of elements that may be used with the collective.
datatype.size
The size of the datatype as supported by the provider. Applications should
validate the size of datatypes that differ based on the platform, such as
FI_LONG_DOUBLE.
max_members
The maximum number of peers that may participate in a collective operation.
mode This field is reserved and should be 0.
If a collective operation is supported, the query call will return FI_SUCCESS, along with
attributes on the limits for using that collective operation through the provider.
Completions
Collective operations map to underlying fi_atomic operations. For a discussion of atomic
completion semantics, see fi_atomic(3). The completion, ordering, and atomicity of
collective operations match those defined for point to point atomic operations.
FLAGS
The following flags are defined for the specified operations.
FI_SCATTER
Applies to fi_query_collective. When set, requests attribute information on the
reduce-scatter collective operation.
RETURN VALUE
Returns 0 on success. On error, a negative value corresponding to fabric errno is
returned. Fabric errno values are defined in rdma/fi_errno.h.
ERRORS
-FI_EAGAIN
See fi_msg(3) for a detailed description of handling FI_EAGAIN.
-FI_EOPNOTSUPP
The requested atomic operation is not supported on this endpoint.
-FI_EMSGSIZE
The number of collective operations in a single request exceeds that supported by
the underlying provider.
NOTES
Collective operations map to atomic operations. As such, they follow most of the
conventions and restrictions as peer to peer atomic operations. This includes data
atomicity, data alignment, and message ordering semantics. See fi_atomic(3) for
additional information on the datatypes and operations defined for atomic and collective
operations.
SEE ALSO
fi_getinfo(3), fi_av(3), fi_atomic(3), fi_cm(3)
AUTHORS
OpenFabrics.