Provided by: erlang-manpages_25.3.2.8+dfsg-1ubuntu4_all 
NAME
file - File interface module.
DESCRIPTION
This module provides an interface to the file system.
Warning:
File operations are only guaranteed to appear atomic when going through the same file server. A NIF or
other OS process may observe intermediate steps on certain operations on some operating systems, eg.
renaming an existing file on Windows, or write_file_info/2 on any OS at the time of writing.
Regarding filename encoding, the Erlang VM can operate in two modes. The current mode can be queried
using function native_name_encoding/0. It returns latin1 or utf8.
In latin1 mode, the Erlang VM does not change the encoding of filenames. In utf8 mode, filenames can
contain Unicode characters greater than 255 and the VM converts filenames back and forth to the native
filename encoding (usually UTF-8, but UTF-16 on Windows).
The default mode depends on the operating system. Windows, MacOS X and Android enforce consistent
filename encoding and therefore the VM uses utf8 mode.
On operating systems with transparent naming (for example, all Unix systems except MacOS X), default is
utf8 if the terminal supports UTF-8, otherwise latin1. The default can be overridden using +fnl (to force
latin1 mode) or +fnu (to force utf8 mode) when starting erl.
On operating systems with transparent naming, files can be inconsistently named, for example, some files
are encoded in UTF-8 while others are encoded in ISO Latin-1. The concept of raw filenames is introduced
to handle file systems with inconsistent naming when running in utf8 mode.
A raw filename is a filename specified as a binary. The Erlang VM does not translate a filename specified
as a binary on systems with transparent naming.
When running in utf8 mode, functions list_dir/1 and read_link/1 never return raw filenames. To return all
filenames including raw filenames, use functions list_dir_all/1 and read_link_all/1.
See also section Notes About Raw Filenames in the STDLIB User's Guide.
Note:
File operations used to accept filenames containing null characters (integer value zero). This caused the
name to be truncated and in some cases arguments to primitive operations to be mixed up. Filenames
containing null characters inside the filename are now rejected and will cause primitive file operations
fail.
DATA TYPES
deep_list() = [char() | atom() | deep_list()]
fd()
A file descriptor representing a file opened in raw mode.
filename() = string()
See also the documentation of the name_all() type.
filename_all() = string() | binary()
See also the documentation of the name_all() type.
io_device() = pid() | fd()
As returned by open/2; pid() is a process handling I/O-protocols.
name() = string() | atom() | deep_list()
If VM is in Unicode filename mode, string() and char() are allowed to be > 255. See also the
documentation of the name_all() type.
name_all() =
string() | atom() | deep_list() | (RawFilename :: binary())
If VM is in Unicode filename mode, characters are allowed to be > 255. RawFilename is a filename
not subject to Unicode translation, meaning that it can contain characters not conforming to the
Unicode encoding expected from the file system (that is, non-UTF-8 characters although the VM is
started in Unicode filename mode). Null characters (integer value zero) are not allowed in
filenames (not even at the end).
posix() =
eacces | eagain | ebadf | ebadmsg | ebusy | edeadlk |
edeadlock | edquot | eexist | efault | efbig | eftype |
eintr | einval | eio | eisdir | eloop | emfile | emlink |
emultihop | enametoolong | enfile | enobufs | enodev |
enolck | enolink | enoent | enomem | enospc | enosr | enostr |
enosys | enotblk | enotdir | enotsup | enxio | eopnotsupp |
eoverflow | eperm | epipe | erange | erofs | espipe | esrch |
estale | etxtbsy | exdev
An atom that is named from the POSIX error codes used in Unix, and in the runtime libraries of
most C compilers.
date_time() = calendar:datetime()
Must denote a valid date and time.
file_info() =
#file_info{size = integer() >= 0 | undefined,
type =
device | directory | other | regular |
symlink | undefined,
access =
read | write | read_write | none | undefined,
atime =
file:date_time() |
integer() >= 0 |
undefined,
mtime =
file:date_time() |
integer() >= 0 |
undefined,
ctime =
file:date_time() |
integer() >= 0 |
undefined,
mode = integer() >= 0 | undefined,
links = integer() >= 0 | undefined,
major_device = integer() >= 0 | undefined,
minor_device = integer() >= 0 | undefined,
inode = integer() >= 0 | undefined,
uid = integer() >= 0 | undefined,
gid = integer() >= 0 | undefined}
location() =
integer() |
{bof, Offset :: integer()} |
{cur, Offset :: integer()} |
{eof, Offset :: integer()} |
bof | cur | eof
mode() =
read | write | append | exclusive | raw | binary |
{delayed_write,
Size :: integer() >= 0,
Delay :: integer() >= 0} |
delayed_write |
{read_ahead, Size :: integer() >= 1} |
read_ahead | compressed | compressed_one |
{encoding, unicode:encoding()} |
sync
file_info_option() =
{time, local} | {time, universal} | {time, posix} | raw
EXPORTS
advise(IoDevice, Offset, Length, Advise) -> ok | {error, Reason}
Types:
IoDevice = io_device()
Offset = Length = integer()
Advise = posix_file_advise()
Reason = posix() | badarg
posix_file_advise() =
normal | sequential | random | no_reuse | will_need |
dont_need
advise/4 can be used to announce an intention to access file data in a specific pattern in the
future, thus allowing the operating system to perform appropriate optimizations.
On some platforms, this function might have no effect.
allocate(File, Offset, Length) -> ok | {error, posix()}
Types:
File = io_device()
Offset = Length = integer() >= 0
allocate/3 can be used to preallocate space for a file.
This function only succeeds in platforms that provide this feature.
change_group(Filename, Gid) -> ok | {error, Reason}
Types:
Filename = name_all()
Gid = integer()
Reason = posix() | badarg
Changes group of a file. See write_file_info/2.
change_mode(Filename, Mode) -> ok | {error, Reason}
Types:
Filename = name_all()
Mode = integer()
Reason = posix() | badarg
Changes permissions of a file. See write_file_info/2.
change_owner(Filename, Uid) -> ok | {error, Reason}
Types:
Filename = name_all()
Uid = integer()
Reason = posix() | badarg
Changes owner of a file. See write_file_info/2.
change_owner(Filename, Uid, Gid) -> ok | {error, Reason}
Types:
Filename = name_all()
Uid = Gid = integer()
Reason = posix() | badarg
Changes owner and group of a file. See write_file_info/2.
change_time(Filename, Mtime) -> ok | {error, Reason}
Types:
Filename = name_all()
Mtime = date_time()
Reason = posix() | badarg
Changes the modification and access times of a file. See write_file_info/2.
change_time(Filename, Atime, Mtime) -> ok | {error, Reason}
Types:
Filename = name_all()
Atime = Mtime = date_time()
Reason = posix() | badarg
Changes the modification and last access times of a file. See write_file_info/2.
close(IoDevice) -> ok | {error, Reason}
Types:
IoDevice = io_device()
Reason = posix() | badarg | terminated
Closes the file referenced by IoDevice. It mostly returns ok, except for some severe errors such
as out of memory.
Notice that if option delayed_write was used when opening the file, close/1 can return an old
write error and not even try to close the file. See open/2.
consult(Filename) -> {ok, Terms} | {error, Reason}
Types:
Filename = name_all()
Terms = [term()]
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
Reads Erlang terms, separated by '.', from Filename. Returns one of the following:
{ok, Terms}:
The file was successfully read.
{error, atom()}:
An error occurred when opening the file or reading it. For a list of typical error codes, see
open/2.
{error, {Line, Mod, Term}}:
An error occurred when interpreting the Erlang terms in the file. To convert the three-element
tuple to an English description of the error, use format_error/1.
Example:
f.txt: {person, "kalle", 25}.
{person, "pelle", 30}.
1> file:consult("f.txt").
{ok,[{person,"kalle",25},{person,"pelle",30}]}
The encoding of Filename can be set by a comment, as described in epp(3erl).
copy(Source, Destination) -> {ok, BytesCopied} | {error, Reason}
copy(Source, Destination, ByteCount) ->
{ok, BytesCopied} | {error, Reason}
Types:
Source = Destination = io_device() | Filename | {Filename, Modes}
Filename = name_all()
Modes = [mode()]
ByteCount = integer() >= 0 | infinity
BytesCopied = integer() >= 0
Reason = posix() | badarg | terminated
Copies ByteCount bytes from Source to Destination. Source and Destination refer to either
filenames or IO devices from, for example, open/2. ByteCount defaults to infinity, denoting an
infinite number of bytes.
Argument Modes is a list of possible modes, see open/2, and defaults to [].
If both Source and Destination refer to filenames, the files are opened with [read, binary] and
[write, binary] prepended to their mode lists, respectively, to optimize the copy.
If Source refers to a filename, it is opened with read mode prepended to the mode list before the
copy, and closed when done.
If Destination refers to a filename, it is opened with write mode prepended to the mode list
before the copy, and closed when done.
Returns {ok, BytesCopied}, where BytesCopied is the number of bytes that was copied, which can be
less than ByteCount if end of file was encountered on the source. If the operation fails, {error,
Reason} is returned.
Typical error reasons: as for open/2 if a file had to be opened, and as for read/2 and write/2.
datasync(IoDevice) -> ok | {error, Reason}
Types:
IoDevice = io_device()
Reason = posix() | badarg | terminated
Ensures that any buffers kept by the operating system (not by the Erlang runtime system) are
written to disk. In many ways it resembles fsync but it does not update some of the metadata of
the file, such as the access time. On some platforms this function has no effect.
Applications that access databases or log files often write a tiny data fragment (for example, one
line in a log file) and then call fsync() immediately to ensure that the written data is
physically stored on the hard disk. Unfortunately, fsync() always initiates two write operations:
one for the newly written data and another one to update the modification time stored in the
inode. If the modification time is not a part of the transaction concept, fdatasync() can be used
to avoid unnecessary inode disk write operations.
Available only in some POSIX systems, this call results in a call to fsync(), or has no effect in
systems not providing the fdatasync() syscall.
del_dir(Dir) -> ok | {error, Reason}
Types:
Dir = name_all()
Reason = posix() | badarg
Tries to delete directory Dir. The directory must be empty before it can be deleted. Returns ok if
successful.
Typical error reasons:
eacces:
Missing search or write permissions for the parent directories of Dir.
eexist:
The directory is not empty.
enoent:
The directory does not exist.
enotdir:
A component of Dir is not a directory. On some platforms, enoent is returned instead.
einval:
Attempt to delete the current directory. On some platforms, eacces is returned instead.
del_dir_r(File) -> ok | {error, Reason}
Types:
File = name_all()
Reason = posix() | badarg
Deletes file or directory File. If File is a directory, its contents is first recursively deleted.
Returns:
ok:
The operation completed without errors.
{error, posix()}:
An error occurred when accessing or deleting File. If some file or directory under File could
not be deleted, File cannot be deleted as it is non-empty, and {error, eexist} is returned.
delete(Filename) -> ok | {error, Reason}
delete(Filename, Opts) -> ok | {error, Reason}
Types:
Filename = name_all()
Opts = [delete_option()]
Reason = posix() | badarg
delete_option() = raw
Tries to delete file Filename. Returns ok if successful.
If the option raw is set, the file server is not called. This can be useful in particular during
the early boot stage when the file server is not yet registered, to still be able to delete local
files.
Typical error reasons:
enoent:
The file does not exist.
eacces:
Missing permission for the file or one of its parents.
eperm:
The file is a directory and the user is not superuser.
enotdir:
A component of the filename is not a directory. On some platforms, enoent is returned instead.
einval:
Filename has an improper type, such as tuple.
Warning:
In a future release, a bad type for argument Filename will probably generate an exception.
eval(Filename) -> ok | {error, Reason}
Types:
Filename = name_all()
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
Reads and evaluates Erlang expressions, separated by '.' (or ',', a sequence of expressions is
also an expression) from Filename. The result of the evaluation is not returned; any expression
sequence in the file must be there for its side effect. Returns one of the following:
ok:
The file was read and evaluated.
{error, atom()}:
An error occurred when opening the file or reading it. For a list of typical error codes, see
open/2.
{error, {Line, Mod, Term}}:
An error occurred when interpreting the Erlang expressions in the file. To convert the three-
element tuple to an English description of the error, use format_error/1.
The encoding of Filename can be set by a comment, as described in epp(3erl).
eval(Filename, Bindings) -> ok | {error, Reason}
Types:
Filename = name_all()
Bindings = erl_eval:binding_struct()
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
The same as eval/1, but the variable bindings Bindings are used in the evaluation. For information
about the variable bindings, see erl_eval(3erl).
format_error(Reason) -> Chars
Types:
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
Chars = string()
Given the error reason returned by any function in this module, returns a descriptive string of
the error in English.
get_cwd() -> {ok, Dir} | {error, Reason}
Types:
Dir = filename()
Reason = posix()
Returns {ok, Dir}, where Dir is the current working directory of the file server.
Note:
In rare circumstances, this function can fail on Unix. It can occur if read permission does not
exist for the parent directories of the current directory.
A typical error reason:
eacces:
Missing read permission for one of the parents of the current directory.
get_cwd(Drive) -> {ok, Dir} | {error, Reason}
Types:
Drive = string()
Dir = filename()
Reason = posix() | badarg
Returns {ok, Dir} or {error, Reason}, where Dir is the current working directory of the specified
drive.
Drive is to be of the form "Letter:", for example, "c:".
Returns {error, enotsup} on platforms that have no concept of current drive (Unix, for example).
Typical error reasons:
enotsup:
The operating system has no concept of drives.
eacces:
The drive does not exist.
einval:
The format of Drive is invalid.
list_dir(Dir) -> {ok, Filenames} | {error, Reason}
Types:
Dir = name_all()
Filenames = [filename()]
Reason =
posix() |
badarg |
{no_translation, Filename :: unicode:latin1_binary()}
Lists all files in a directory, except files with raw filenames. Returns {ok, Filenames} if
successful, otherwise {error, Reason}. Filenames is a list of the names of all the files in the
directory. The names are not sorted.
Typical error reasons:
eacces:
Missing search or write permissions for Dir or one of its parent directories.
enoent:
The directory does not exist.
{no_translation, Filename}:
Filename is a binary() with characters coded in ISO Latin-1 and the VM was started with
parameter +fnue.
list_dir_all(Dir) -> {ok, Filenames} | {error, Reason}
Types:
Dir = name_all()
Filenames = [filename_all()]
Reason = posix() | badarg
Lists all the files in a directory, including files with raw filenames. Returns {ok, Filenames} if
successful, otherwise {error, Reason}. Filenames is a list of the names of all the files in the
directory. The names are not sorted.
Typical error reasons:
eacces:
Missing search or write permissions for Dir or one of its parent directories.
enoent:
The directory does not exist.
make_dir(Dir) -> ok | {error, Reason}
Types:
Dir = name_all()
Reason = posix() | badarg
Tries to create directory Dir. Missing parent directories are not created. Returns ok if
successful.
Typical error reasons:
eacces:
Missing search or write permissions for the parent directories of Dir.
eexist:
A file or directory named Dir exists already.
enoent:
A component of Dir does not exist.
enospc:
No space is left on the device.
enotdir:
A component of Dir is not a directory. On some platforms, enoent is returned instead.
make_link(Existing, New) -> ok | {error, Reason}
Types:
Existing = New = name_all()
Reason = posix() | badarg
Makes a hard link from Existing to New on platforms supporting links (Unix and Windows). This
function returns ok if the link was successfully created, otherwise {error, Reason}. On platforms
not supporting links, {error,enotsup} is returned.
Typical error reasons:
eacces:
Missing read or write permissions for the parent directories of Existing or New.
eexist:
New already exists.
enotsup:
Hard links are not supported on this platform.
make_symlink(Existing, New) -> ok | {error, Reason}
Types:
Existing = New = name_all()
Reason = posix() | badarg
Creates a symbolic link New to the file or directory Existing on platforms supporting symbolic
links (most Unix systems and Windows, beginning with Vista). Existing does not need to exist.
Returns ok if the link is successfully created, otherwise {error, Reason}. On platforms not
supporting symbolic links, {error, enotsup} is returned.
Typical error reasons:
eacces:
Missing read or write permissions for the parent directories of Existing or New.
eexist:
New already exists.
enotsup:
Symbolic links are not supported on this platform.
eperm:
User does not have privileges to create symbolic links (SeCreateSymbolicLinkPrivilege on
Windows).
native_name_encoding() -> latin1 | utf8
Returns the filename encoding mode. If it is latin1, the system translates no filenames. If it is
utf8, filenames are converted back and forth to the native filename encoding (usually UTF-8, but
UTF-16 on Windows).
open(File, Modes) -> {ok, IoDevice} | {error, Reason}
Types:
File = Filename | iodata()
Filename = name_all()
Modes = [mode() | ram | directory]
IoDevice = io_device()
Reason = posix() | badarg | system_limit
Opens file File in the mode determined by Modes, which can contain one or more of the following
options:
read:
The file, which must exist, is opened for reading.
write:
The file is opened for writing. It is created if it does not exist. If the file exists and
write is not combined with read, the file is truncated.
append:
The file is opened for writing. It is created if it does not exist. Every write operation to a
file opened with append takes place at the end of the file.
exclusive:
The file is opened for writing. It is created if it does not exist. If the file exists,
{error, eexist} is returned.
Warning:
This option does not guarantee exclusiveness on file systems not supporting O_EXCL properly,
such as NFS. Do not depend on this option unless you know that the file system supports it (in
general, local file systems are safe).
raw:
Allows faster access to a file, as no Erlang process is needed to handle the file. However, a
file opened in this way has the following limitations:
* The functions in the io module cannot be used, as they can only talk to an Erlang process.
Instead, use functions read/2, read_line/1, and write/2.
* Especially if read_line/1 is to be used on a raw file, it is recommended to combine this
option with option {read_ahead, Size} as line-oriented I/O is inefficient without buffering.
* Only the Erlang process that opened the file can use it.
* A remote Erlang file server cannot be used. The computer on which the Erlang node is running
must have access to the file system (directly or through NFS).
binary:
Read operations on the file return binaries rather than lists.
{delayed_write, Size, Delay}:
Data in subsequent write/2 calls is buffered until at least Size bytes are buffered, or until
the oldest buffered data is Delay milliseconds old. Then all buffered data is written in one
operating system call. The buffered data is also flushed before some other file operation than
write/2 is executed.
The purpose of this option is to increase performance by reducing the number of operating
system calls. Thus, the write/2 calls must be for sizes significantly less than Size, and not
interspersed by too many other file operations.
When this option is used, the result of write/2 calls can prematurely be reported as
successful, and if a write error occurs, the error is reported as the result of the next file
operation, which is not executed.
For example, when delayed_write is used, after a number of write/2 calls, close/1 can return
{error, enospc}, as there is not enough space on the disc for previously written data. close/1
must probably be called again, as the file is still open.
delayed_write:
The same as {delayed_write, Size, Delay} with reasonable default values for Size and Delay
(roughly some 64 KB, 2 seconds).
{read_ahead, Size}:
Activates read data buffering. If read/2 calls are for significantly less than Size bytes,
read operations to the operating system are still performed for blocks of Size bytes. The
extra data is buffered and returned in subsequent read/2 calls, giving a performance gain as
the number of operating system calls is reduced.
The read_ahead buffer is also highly used by function read_line/1 in raw mode, therefore this
option is recommended (for performance reasons) when accessing raw files using that function.
If read/2 calls are for sizes not significantly less than, or even greater than Size bytes, no
performance gain can be expected.
read_ahead:
The same as {read_ahead, Size} with a reasonable default value for Size (roughly some 64 KB).
compressed:
Makes it possible to read or write gzip compressed files. Option compressed must be combined
with read or write, but not both. Notice that the file size obtained with read_file_info/1
does probably not match the number of bytes that can be read from a compressed file.
compressed_one:
Read one member of a gzip compressed file. Option compressed_one can only be combined with
read.
{encoding, Encoding}:
Makes the file perform automatic translation of characters to and from a specific (Unicode)
encoding. Notice that the data supplied to write/2 or returned by read/2 still is byte-
oriented; this option denotes only how data is stored in the disk file.
Depending on the encoding, different methods of reading and writing data is preferred. The
default encoding of latin1 implies using this module (file) for reading and writing data as
the interfaces provided here work with byte-oriented data. Using other (Unicode) encodings
makes the io(3erl) functions get_chars, get_line, and put_chars more suitable, as they can
work with the full Unicode range.
If data is sent to an io_device() in a format that cannot be converted to the specified
encoding, or if data is read by a function that returns data in a format that cannot cope with
the character range of the data, an error occurs and the file is closed.
Allowed values for Encoding:
latin1:
The default encoding. Bytes supplied to the file, that is, write/2 are written "as is" on
the file. Likewise, bytes read from the file, that is, read/2 are returned "as is". If
module io(3erl) is used for writing, the file can only cope with Unicode characters up to
code point 255 (the ISO Latin-1 range).
unicode or utf8:
Characters are translated to and from UTF-8 encoding before they are written to or read from
the file. A file opened in this way can be readable using function read/2, as long as no
data stored on the file lies beyond the ISO Latin-1 range (0..255), but failure occurs if
the data contains Unicode code points beyond that range. The file is best read with the
functions in the Unicode aware module io(3erl).
Bytes written to the file by any means are translated to UTF-8 encoding before being stored
on the disk file.
utf16 or {utf16,big}:
Works like unicode, but translation is done to and from big endian UTF-16 instead of UTF-8.
{utf16,little}:
Works like unicode, but translation is done to and from little endian UTF-16 instead of
UTF-8.
utf32 or {utf32,big}:
Works like unicode, but translation is done to and from big endian UTF-32 instead of UTF-8.
{utf32,little}:
Works like unicode, but translation is done to and from little endian UTF-32 instead of
UTF-8.
The Encoding can be changed for a file "on the fly" by using function io:setopts/2. So a file
can be analyzed in latin1 encoding for, for example, a BOM, positioned beyond the BOM and then
be set for the right encoding before further reading. For functions identifying BOMs, see
module unicode(3erl).
This option is not allowed on raw files.
ram:
File must be iodata(). Returns an fd(), which lets module file operate on the data in-memory
as if it is a file.
sync:
On platforms supporting it, enables the POSIX O_SYNC synchronous I/O flag or its platform-
dependent equivalent (for example, FILE_FLAG_WRITE_THROUGH on Windows) so that writes to the
file block until the data is physically written to disk. However, be aware that the exact
semantics of this flag differ from platform to platform. For example, none of Linux or Windows
guarantees that all file metadata are also written before the call returns. For precise
semantics, check the details of your platform documentation. On platforms with no support for
POSIX O_SYNC or equivalent, use of the sync flag causes open to return {error, enotsup}.
directory:
Allows open to work on directories.
Returns:
{ok, IoDevice}:
The file is opened in the requested mode. IoDevice is a reference to the file.
{error, Reason}:
The file cannot be opened.
IoDevice is really the pid of the process that handles the file. This process monitors the process
that originally opened the file (the owner process). If the owner process terminates, the file is
closed and the process itself terminates too. An IoDevice returned from this call can be used as
an argument to the I/O functions (see io(3erl)).
Warning:
While this function can be used to open any file, we recommend against using it for NFS-mounted
files, FIFOs, devices, or similar since they can cause IO threads to hang forever.
If your application needs to interact with these kinds of files we recommend breaking out those
parts to a port program instead.
Note:
In previous versions of file, modes were specified as one of the atoms read, write, or read_write
instead of a list. This is still allowed for reasons of backwards compatibility, but is not to be
used for new code. Also note that read_write is not allowed in a mode list.
Typical error reasons:
enoent:
The file does not exist.
eacces:
Missing permission for reading the file or searching one of the parent directories.
eisdir:
The named file is a directory.
enotdir:
A component of the filename is not a directory, or the filename itself is not a directory if
directory mode was specified. On some platforms, enoent is returned instead.
enospc:
There is no space left on the device (if write access was specified).
path_consult(Path, Filename) ->
{ok, Terms, FullName} | {error, Reason}
Types:
Path = [Dir]
Dir = Filename = name_all()
Terms = [term()]
FullName = filename_all()
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
Searches the path Path (a list of directory names) until the file Filename is found. If Filename
is an absolute filename, Path is ignored. Then reads Erlang terms, separated by '.', from the
file.
Returns one of the following:
{ok, Terms, FullName}:
The file is successfully read. FullName is the full name of the file.
{error, enoent}:
The file cannot be found in any of the directories in Path.
{error, atom()}:
An error occurred when opening the file or reading it. For a list of typical error codes, see
open/2.
{error, {Line, Mod, Term}}:
An error occurred when interpreting the Erlang terms in the file. Use format_error/1 to
convert the three-element tuple to an English description of the error.
The encoding of Filename can be set by a comment as described in epp(3erl).
path_eval(Path, Filename) -> {ok, FullName} | {error, Reason}
Types:
Path = [Dir :: name_all()]
Filename = name_all()
FullName = filename_all()
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
Searches the path Path (a list of directory names) until the file Filename is found. If Filename
is an absolute filename, Path is ignored. Then reads and evaluates Erlang expressions, separated
by '.' (or ',', a sequence of expressions is also an expression), from the file. The result of
evaluation is not returned; any expression sequence in the file must be there for its side effect.
Returns one of the following:
{ok, FullName}:
The file is read and evaluated. FullName is the full name of the file.
{error, enoent}:
The file cannot be found in any of the directories in Path.
{error, atom()}:
An error occurred when opening the file or reading it. For a list of typical error codes, see
open/2.
{error, {Line, Mod, Term}}:
An error occurred when interpreting the Erlang expressions in the file. Use format_error/1 to
convert the three-element tuple to an English description of the error.
The encoding of Filename can be set by a comment as described in epp(3erl).
path_open(Path, Filename, Modes) ->
{ok, IoDevice, FullName} | {error, Reason}
Types:
Path = [Dir :: name_all()]
Filename = name_all()
Modes = [mode() | directory]
IoDevice = io_device()
FullName = filename_all()
Reason = posix() | badarg | system_limit
Searches the path Path (a list of directory names) until the file Filename is found. If Filename
is an absolute filename, Path is ignored. Then opens the file in the mode determined by Modes.
Returns one of the following:
{ok, IoDevice, FullName}:
The file is opened in the requested mode. IoDevice is a reference to the file and FullName is
the full name of the file.
{error, enoent}:
The file cannot be found in any of the directories in Path.
{error, atom()}:
The file cannot be opened.
path_script(Path, Filename) ->
{ok, Value, FullName} | {error, Reason}
Types:
Path = [Dir :: name_all()]
Filename = name_all()
Value = term()
FullName = filename_all()
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
Searches the path Path (a list of directory names) until the file Filename is found. If Filename
is an absolute filename, Path is ignored. Then reads and evaluates Erlang expressions, separated
by '.' (or ',', a sequence of expressions is also an expression), from the file.
Returns one of the following:
{ok, Value, FullName}:
The file is read and evaluated. FullName is the full name of the file and Value the value of
the last expression.
{error, enoent}:
The file cannot be found in any of the directories in Path.
{error, atom()}:
An error occurred when opening the file or reading it. For a list of typical error codes, see
open/2.
{error, {Line, Mod, Term}}:
An error occurred when interpreting the Erlang expressions in the file. Use format_error/1 to
convert the three-element tuple to an English description of the error.
The encoding of Filename can be set by a comment as described in epp(3erl).
path_script(Path, Filename, Bindings) ->
{ok, Value, FullName} | {error, Reason}
Types:
Path = [Dir :: name_all()]
Filename = name_all()
Bindings = erl_eval:binding_struct()
Value = term()
FullName = filename_all()
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
The same as path_script/2 but the variable bindings Bindings are used in the evaluation. See
erl_eval(3erl) about variable bindings.
pid2name(Pid) -> {ok, Filename} | undefined
Types:
Filename = filename_all()
Pid = pid()
If Pid is an I/O device, that is, a pid returned from open/2, this function returns the filename,
or rather:
{ok, Filename}:
If the file server of this node is not a slave, the file was opened by the file server of this
node (this implies that Pid must be a local pid) and the file is not closed. Filename is the
filename in flat string format.
undefined:
In all other cases.
Warning:
This function is intended for debugging only.
position(IoDevice, Location) ->
{ok, NewPosition} | {error, Reason}
Types:
IoDevice = io_device()
Location = location()
NewPosition = integer()
Reason = posix() | badarg | terminated
Sets the position of the file referenced by IoDevice to Location. Returns {ok, NewPosition} (as
absolute offset) if successful, otherwise {error, Reason}. Location is one of the following:
Offset:
The same as {bof, Offset}.
{bof, Offset}:
Absolute offset.
{cur, Offset}:
Offset from the current position.
{eof, Offset}:
Offset from the end of file.
bof | cur | eof:
The same as above with Offset 0.
Notice that offsets are counted in bytes, not in characters. If the file is opened using some
other encoding than latin1, one byte does not correspond to one character. Positioning in such a
file can only be done to known character boundaries. That is, to a position earlier retrieved by
getting a current position, to the beginning/end of the file or to some other position known to be
on a correct character boundary by some other means (typically beyond a byte order mark in the
file, which has a known byte-size).
A typical error reason is:
einval:
Either Location is illegal, or it is evaluated to a negative offset in the file. Notice that
if the resulting position is a negative value, the result is an error, and after the call the
file position is undefined.
pread(IoDevice, LocNums) -> {ok, DataL} | eof | {error, Reason}
Types:
IoDevice = io_device()
LocNums =
[{Location :: location(), Number :: integer() >= 0}]
DataL = [Data]
Data = string() | binary() | eof
Reason = posix() | badarg | terminated
Performs a sequence of pread/3 in one operation, which is more efficient than calling them one at
a time. Returns {ok, [Data, ...]} or {error, Reason}, where each Data, the result of the
corresponding pread, is either a list or a binary depending on the mode of the file, or eof if the
requested position is beyond end of file.
As the position is specified as a byte-offset, take special caution when working with files where
encoding is set to something else than latin1, as not every byte position is a valid character
boundary on such a file.
pread(IoDevice, Location, Number) ->
{ok, Data} | eof | {error, Reason}
Types:
IoDevice = io_device()
Location = location()
Number = integer() >= 0
Data = string() | binary()
Reason = posix() | badarg | terminated
Combines position/2 and read/2 in one operation, which is more efficient than calling them one at
a time.
Location is only allowed to be an integer for raw and ram modes.
The current position of the file after the operation is undefined for raw mode and unchanged for
ram mode.
As the position is specified as a byte-offset, take special caution when working with files where
encoding is set to something else than latin1, as not every byte position is a valid character
boundary on such a file.
pwrite(IoDevice, LocBytes) -> ok | {error, {N, Reason}}
Types:
IoDevice = io_device()
LocBytes = [{Location :: location(), Bytes :: iodata()}]
N = integer() >= 0
Reason = posix() | badarg | terminated
Performs a sequence of pwrite/3 in one operation, which is more efficient than calling them one at
a time. Returns ok or {error, {N, Reason}}, where N is the number of successful writes done before
the failure.
When positioning in a file with other encoding than latin1, caution must be taken to set the
position on a correct character boundary. For details, see position/2.
pwrite(IoDevice, Location, Bytes) -> ok | {error, Reason}
Types:
IoDevice = io_device()
Location = location()
Bytes = iodata()
Reason = posix() | badarg | terminated
Combines position/2 and write/2 in one operation, which is more efficient than calling them one at
a time.
Location is only allowed to be an integer for raw and ram modes.
The current position of the file after the operation is undefined for raw mode and unchanged for
ram mode.
When positioning in a file with other encoding than latin1, caution must be taken to set the
position on a correct character boundary. For details, see position/2.
read(IoDevice, Number) -> {ok, Data} | eof | {error, Reason}
Types:
IoDevice = io_device() | atom()
Number = integer() >= 0
Data = string() | binary()
Reason =
posix() |
badarg | terminated |
{no_translation, unicode, latin1}
Reads Number bytes/characters from the file referenced by IoDevice. The functions read/2, pread/3,
and read_line/1 are the only ways to read from a file opened in raw mode (although they work for
normally opened files, too).
For files where encoding is set to something else than latin1, one character can be represented by
more than one byte on the file. The parameter Number always denotes the number of characters read
from the file, while the position in the file can be moved much more than this number when reading
a Unicode file.
Also, if encoding is set to something else than latin1, the read/3 call fails if the data contains
characters larger than 255, which is why module io(3erl) is to be preferred when reading such a
file.
The function returns:
{ok, Data}:
If the file was opened in binary mode, the read bytes are returned in a binary, otherwise in a
list. The list or binary is shorter than the number of bytes requested if end of file was
reached.
eof:
Returned if Number>0 and end of file was reached before anything at all could be read.
{error, Reason}:
An error occurred.
Typical error reasons:
ebadf:
The file is not opened for reading.
{no_translation, unicode, latin1}:
The file is opened with another encoding than latin1 and the data in the file cannot be
translated to the byte-oriented data that this function returns.
read_file(Filename) -> {ok, Binary} | {error, Reason}
Types:
Filename = name_all()
Binary = binary()
Reason = posix() | badarg | terminated | system_limit
Returns {ok, Binary}, where Binary is a binary data object that contains the contents of Filename,
or {error, Reason} if an error occurs.
Typical error reasons:
enoent:
The file does not exist.
eacces:
Missing permission for reading the file, or for searching one of the parent directories.
eisdir:
The named file is a directory.
enotdir:
A component of the filename is not a directory. On some platforms, enoent is returned instead.
enomem:
There is not enough memory for the contents of the file.
read_file_info(File) -> {ok, FileInfo} | {error, Reason}
read_file_info(File, Opts) -> {ok, FileInfo} | {error, Reason}
Types:
File = name_all() | io_device()
Opts = [file_info_option()]
FileInfo = file_info()
Reason = posix() | badarg
Retrieves information about a file. Returns {ok, FileInfo} if successful, otherwise {error,
Reason}. FileInfo is a record file_info, defined in the Kernel include file file.hrl. Include the
following directive in the module from which the function is called:
-include_lib("kernel/include/file.hrl").
The time type returned in atime, mtime, and ctime is dependent on the time type set in Opts ::
{time, Type} as follows:
local:
Returns local time.
universal:
Returns universal time.
posix:
Returns seconds since or before Unix time epoch, which is 1970-01-01 00:00 UTC.
Default is {time, local}.
If the option raw is set, the file server is not called and only information about local files is
returned. Note that this will break this module's atomicity guarantees as it can race with a
concurrent call to write_file_info/1,2.
This option has no effect when the function is given an I/O device instead of a file name. Use
open/2 with the raw mode to obtain a file descriptor first.
Note:
As file times are stored in POSIX time on most OS, it is faster to query file information with
option posix.
The record file_info contains the following fields:
size = integer() >= 0:
Size of file in bytes.
type = device | directory | other | regular:
The type of the file. Can also contain symlink when returned from read_link_info/1,2.
access = read | write | read_write | none:
The current system access to the file.
atime = date_time() | integer() >= 0:
The last time the file was read.
mtime = date_time() | integer() >= 0:
The last time the file was written.
ctime = date_time() | integer() >=0:
The interpretation of this time field depends on the operating system. On Unix, it is the last
time the file or the inode was changed. In Windows, it is the create time.
mode = integer() >= 0:
The file permissions as the sum of the following bit values:
8#00400:
read permission: owner
8#00200:
write permission: owner
8#00100:
execute permission: owner
8#00040:
read permission: group
8#00020:
write permission: group
8#00010:
execute permission: group
8#00004:
read permission: other
8#00002:
write permission: other
8#00001:
execute permission: other
16#800:
set user id on execution
16#400:
set group id on execution
On Unix platforms, other bits than those listed above may be set.
links = integer() >= 0:
Number of links to the file (this is always 1 for file systems that have no concept of links).
major_device = integer() >= 0:
Identifies the file system where the file is located. In Windows, the number indicates a drive
as follows: 0 means A:, 1 means B:, and so on.
minor_device = integer() >= 0:
Only valid for character devices on Unix. In all other cases, this field is zero.
inode = integer() >= 0:
Gives the inode number. On non-Unix file systems, this field is zero.
uid = integer() >= 0:
Indicates the owner of the file. On non-Unix file systems, this field is zero.
gid = integer() >= 0:
Gives the group that the owner of the file belongs to. On non-Unix file systems, this field is
zero.
Typical error reasons:
eacces:
Missing search permission for one of the parent directories of the file.
enoent:
The file does not exist.
enotdir:
A component of the filename is not a directory. On some platforms, enoent is returned instead.
read_line(IoDevice) -> {ok, Data} | eof | {error, Reason}
Types:
IoDevice = io_device() | atom()
Data = string() | binary()
Reason =
posix() |
badarg | terminated |
{no_translation, unicode, latin1}
Reads a line of bytes/characters from the file referenced by IoDevice. Lines are defined to be
delimited by the linefeed (LF, \n) character, but any carriage return (CR, \r) followed by a
newline is also treated as a single LF character (the carriage return is silently ignored). The
line is returned including the LF, but excluding any CR immediately followed by an LF. This
behaviour is consistent with the behaviour of io:get_line/2. If end of file is reached without any
LF ending the last line, a line with no trailing LF is returned.
The function can be used on files opened in raw mode. However, it is inefficient to use it on raw
files if the file is not opened with option {read_ahead, Size} specified. Thus, combining raw and
{read_ahead, Size} is highly recommended when opening a text file for raw line-oriented reading.
If encoding is set to something else than latin1, the read_line/1 call fails if the data contains
characters larger than 255, why module io(3erl) is to be preferred when reading such a file.
The function returns:
{ok, Data}:
One line from the file is returned, including the trailing LF, but with CRLF sequences
replaced by a single LF (see above).
If the file is opened in binary mode, the read bytes are returned in a binary, otherwise in a
list.
eof:
Returned if end of file was reached before anything at all could be read.
{error, Reason}:
An error occurred.
Typical error reasons:
ebadf:
The file is not opened for reading.
{no_translation, unicode, latin1}:
The file is opened with another encoding than latin1 and the data on the file cannot be
translated to the byte-oriented data that this function returns.
read_link(Name) -> {ok, Filename} | {error, Reason}
Types:
Name = name_all()
Filename = filename()
Reason = posix() | badarg
Returns {ok, Filename} if Name refers to a symbolic link that is not a raw filename, or {error,
Reason} otherwise. On platforms that do not support symbolic links, the return value is
{error,enotsup}.
Typical error reasons:
einval:
Name does not refer to a symbolic link or the name of the file that it refers to does not
conform to the expected encoding.
enoent:
The file does not exist.
enotsup:
Symbolic links are not supported on this platform.
read_link_all(Name) -> {ok, Filename} | {error, Reason}
Types:
Name = name_all()
Filename = filename_all()
Reason = posix() | badarg
Returns {ok, Filename} if Name refers to a symbolic link or {error, Reason} otherwise. On
platforms that do not support symbolic links, the return value is {error,enotsup}.
Notice that Filename can be either a list or a binary.
Typical error reasons:
einval:
Name does not refer to a symbolic link.
enoent:
The file does not exist.
enotsup:
Symbolic links are not supported on this platform.
read_link_info(Name) -> {ok, FileInfo} | {error, Reason}
read_link_info(Name, Opts) -> {ok, FileInfo} | {error, Reason}
Types:
Name = name_all()
Opts = [file_info_option()]
FileInfo = file_info()
Reason = posix() | badarg
Works like read_file_info/1,2 except that if Name is a symbolic link, information about the link
is returned in the file_info record and the type field of the record is set to symlink.
If the option raw is set, the file server is not called and only information about local files is
returned. Note that this will break this module's atomicity guarantees as it can race with a
concurrent call to write_file_info/1,2
If Name is not a symbolic link, this function returns the same result as read_file_info/1. On
platforms that do not support symbolic links, this function is always equivalent to
read_file_info/1.
rename(Source, Destination) -> ok | {error, Reason}
Types:
Source = Destination = name_all()
Reason = posix() | badarg
Tries to rename the file Source to Destination. It can be used to move files (and directories)
between directories, but it is not sufficient to specify the destination only. The destination
filename must also be specified. For example, if bar is a normal file and foo and baz are
directories, rename("foo/bar", "baz") returns an error, but rename("foo/bar", "baz/bar") succeeds.
Returns ok if it is successful.
Note:
Renaming of open files is not allowed on most platforms (see eacces below).
Typical error reasons:
eacces:
Missing read or write permissions for the parent directories of Source or Destination. On some
platforms, this error is given if either Source or Destination is open.
eexist:
Destination is not an empty directory. On some platforms, also given when Source and
Destination are not of the same type.
einval:
Source is a root directory, or Destination is a subdirectory of Source.
eisdir:
Destination is a directory, but Source is not.
enoent:
Source does not exist.
enotdir:
Source is a directory, but Destination is not.
exdev:
Source and Destination are on different file systems.
script(Filename) -> {ok, Value} | {error, Reason}
Types:
Filename = name_all()
Value = term()
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
Reads and evaluates Erlang expressions, separated by '.' (or ',', a sequence of expressions is
also an expression), from the file.
Returns one of the following:
{ok, Value}:
The file is read and evaluated. Value is the value of the last expression.
{error, atom()}:
An error occurred when opening the file or reading it. For a list of typical error codes, see
open/2.
{error, {Line, Mod, Term}}:
An error occurred when interpreting the Erlang expressions in the file. Use format_error/1 to
convert the three-element tuple to an English description of the error.
The encoding of Filename can be set by a comment as described in epp(3erl).
script(Filename, Bindings) -> {ok, Value} | {error, Reason}
Types:
Filename = name_all()
Bindings = erl_eval:binding_struct()
Value = term()
Reason =
posix() |
badarg | terminated | system_limit |
{Line :: integer(), Mod :: module(), Term :: term()}
The same as script/1 but the variable bindings Bindings are used in the evaluation. See
erl_eval(3erl) about variable bindings.
sendfile(Filename, Socket) ->
{ok, integer() >= 0} |
{error, inet:posix() | closed | badarg | not_owner}
Types:
Filename = name_all()
Socket =
inet:socket() |
socket:socket() |
fun((iolist()) -> ok | {error, inet:posix() | closed})
Sends the file Filename to Socket. Returns {ok, BytesSent} if successful, otherwise {error,
Reason}.
sendfile(RawFile, Socket, Offset, Bytes, Opts) ->
{ok, integer() >= 0} |
{error, inet:posix() | closed | badarg | not_owner}
Types:
RawFile = fd()
Socket =
inet:socket() |
socket:socket() |
fun((iolist()) -> ok | {error, inet:posix() | closed})
Offset = Bytes = integer() >= 0
Opts = [sendfile_option()]
sendfile_option() =
{chunk_size, integer() >= 0} | {use_threads, boolean()}
Sends Bytes from the file referenced by RawFile beginning at Offset to Socket. Returns {ok,
BytesSent} if successful, otherwise {error, Reason}. If Bytes is set to 0 all data after the
specified Offset is sent.
The file used must be opened using the raw flag, and the process calling sendfile must be the
controlling process of the socket. See gen_tcp:controlling_process/2 or module socket's level otp
socket option controlling_process.
If the OS used does not support non-blocking sendfile, an Erlang fallback using read/2 and
gen_tcp:send/2 is used.
The option list can contain the following options:
chunk_size:
The chunk size used by the Erlang fallback to send data. If using the fallback, set this to a
value that comfortably fits in the systems memory. Default is 20 MB.
set_cwd(Dir) -> ok | {error, Reason}
Types:
Dir = name() | EncodedBinary
EncodedBinary = binary()
Reason = posix() | badarg | no_translation
Sets the current working directory of the file server to Dir. Returns ok if successful.
The functions in the module file usually treat binaries as raw filenames, that is, they are passed
"as is" even when the encoding of the binary does not agree with native_name_encoding(). However,
this function expects binaries to be encoded according to the value returned by
native_name_encoding().
Typical error reasons are:
enoent:
The directory does not exist.
enotdir:
A component of Dir is not a directory. On some platforms, enoent is returned.
eacces:
Missing permission for the directory or one of its parents.
badarg:
Dir has an improper type, such as tuple.
no_translation:
Dir is a binary() with characters coded in ISO-latin-1 and the VM is operating with unicode
filename encoding.
Warning:
In a future release, a bad type for argument Dir will probably generate an exception.
sync(IoDevice) -> ok | {error, Reason}
Types:
IoDevice = io_device()
Reason = posix() | badarg | terminated
Ensures that any buffers kept by the operating system (not by the Erlang runtime system) are
written to disk. On some platforms, this function might have no effect.
A typical error reason is:
enospc:
Not enough space left to write the file.
truncate(IoDevice) -> ok | {error, Reason}
Types:
IoDevice = io_device()
Reason = posix() | badarg | terminated
Truncates the file referenced by IoDevice at the current position. Returns ok if successful,
otherwise {error, Reason}.
write(IoDevice, Bytes) -> ok | {error, Reason}
Types:
IoDevice = io_device() | atom()
Bytes = iodata()
Reason = posix() | badarg | terminated
Writes Bytes to the file referenced by IoDevice. This function is the only way to write to a file
opened in raw mode (although it works for normally opened files too). Returns ok if successful,
and {error, Reason} otherwise.
If the file is opened with encoding set to something else than latin1, each byte written can
result in many bytes being written to the file, as the byte range 0..255 can represent anything
between one and four bytes depending on value and UTF encoding type.
Typical error reasons:
ebadf:
The file is not opened for writing.
enospc:
No space is left on the device.
write_file(Filename, Bytes) -> ok | {error, Reason}
Types:
Filename = name_all()
Bytes = iodata()
Reason = posix() | badarg | terminated | system_limit
Writes the contents of the iodata term Bytes to file Filename. The file is created if it does not
exist. If it exists, the previous contents are overwritten. Returns ok if successful, otherwise
{error, Reason}.
Typical error reasons:
enoent:
A component of the filename does not exist.
enotdir:
A component of the filename is not a directory. On some platforms, enoent is returned instead.
enospc:
No space is left on the device.
eacces:
Missing permission for writing the file or searching one of the parent directories.
eisdir:
The named file is a directory.
write_file(Filename, Bytes, Modes) -> ok | {error, Reason}
Types:
Filename = name_all()
Bytes = iodata()
Modes = [mode()]
Reason = posix() | badarg | terminated | system_limit
Same as write_file/2, but takes a third argument Modes, a list of possible modes, see open/2. The
mode flags binary and write are implicit, so they are not to be used.
write_file_info(Filename, FileInfo) -> ok | {error, Reason}
write_file_info(Filename, FileInfo, Opts) -> ok | {error, Reason}
Types:
Filename = name_all()
Opts = [file_info_option()]
FileInfo = file_info()
Reason = posix() | badarg
Changes file information. Returns ok if successful, otherwise {error, Reason}. FileInfo is a
record file_info, defined in the Kernel include file file.hrl. Include the following directive in
the module from which the function is called:
-include_lib("kernel/include/file.hrl").
The time type set in atime, mtime, and ctime depends on the time type set in Opts :: {time, Type}
as follows:
local:
Interprets the time set as local.
universal:
Interprets it as universal time.
posix:
Must be seconds since or before Unix time epoch, which is 1970-01-01 00:00 UTC.
Default is {time, local}.
If the option raw is set, the file server is not called and only information about local files is
returned.
The following fields are used from the record, if they are specified:
atime = date_time() | integer() >= 0:
The last time the file was read.
mtime = date_time() | integer() >= 0:
The last time the file was written.
ctime = date_time() | integer() >= 0:
On Unix, any value specified for this field is ignored (the "ctime" for the file is set to the
current time). On Windows, this field is the new creation time to set for the file.
mode = integer() >= 0:
The file permissions as the sum of the following bit values:
8#00400:
Read permission: owner
8#00200:
Write permission: owner
8#00100:
Execute permission: owner
8#00040:
Read permission: group
8#00020:
Write permission: group
8#00010:
Execute permission: group
8#00004:
Read permission: other
8#00002:
Write permission: other
8#00001:
Execute permission: other
16#800:
Set user id on execution
16#400:
Set group id on execution
On Unix platforms, other bits than those listed above may be set.
uid = integer() >= 0:
Indicates the file owner. Ignored for non-Unix file systems.
gid = integer() >= 0:
Gives the group that the file owner belongs to. Ignored for non-Unix file systems.
Typical error reasons:
eacces:
Missing search permission for one of the parent directories of the file.
enoent:
The file does not exist.
enotdir:
A component of the filename is not a directory. On some platforms, enoent is returned instead.
POSIX ERROR CODES
* eacces - Permission denied
* eagain - Resource temporarily unavailable
* ebadf - Bad file number
* ebusy - File busy
* edquot - Disk quota exceeded
* eexist - File already exists
* efault - Bad address in system call argument
* efbig - File too large
* eintr - Interrupted system call
* einval - Invalid argument
* eio - I/O error
* eisdir - Illegal operation on a directory
* eloop - Too many levels of symbolic links
* emfile - Too many open files
* emlink - Too many links
* enametoolong - Filename too long
* enfile - File table overflow
* enodev - No such device
* enoent - No such file or directory
* enomem - Not enough memory
* enospc - No space left on device
* enotblk - Block device required
* enotdir - Not a directory
* enotsup - Operation not supported
* enxio - No such device or address
* eperm - Not owner
* epipe - Broken pipe
* erofs - Read-only file system
* espipe - Invalid seek
* esrch - No such process
* estale - Stale remote file handle
* exdev - Cross-domain link
PERFORMANCE
For increased performance, raw files are recommended.
A normal file is really a process so it can be used as an I/O device (see io). Therefore, when data is
written to a normal file, the sending of the data to the file process, copies all data that are not
binaries. Opening the file in binary mode and writing binaries is therefore recommended. If the file is
opened on another node, or if the file server runs as slave to the file server of another node, also
binaries are copied.
Note:
Raw files use the file system of the host machine of the node. For normal files (non-raw), the file
server is used to find the files, and if the node is running its file server as slave to the file server
of another node, and the other node runs on some other host machine, they can have different file
systems. However, this is seldom a problem.
open/2 can be given the options delayed_write and read_ahead to turn on caching, which will reduce the
number of operating system calls and greatly improve performance for small reads and writes. However, the
overhead won't disappear completely and it's best to keep the number of file operations to a minimum. As
a contrived example, the following function writes 4MB in 2.5 seconds when tested:
create_file_slow(Name) ->
{ok, Fd} = file:open(Name, [raw, write, delayed_write, binary]),
create_file_slow_1(Fd, 4 bsl 20),
file:close(Fd).
create_file_slow_1(_Fd, 0) ->
ok;
create_file_slow_1(Fd, M) ->
ok = file:write(Fd, <<0>>),
create_file_slow_1(Fd, M - 1).
The following functionally equivalent code writes 128 bytes per call to write/2 and so does the same work
in 0.08 seconds, which is roughly 30 times faster:
create_file(Name) ->
{ok, Fd} = file:open(Name, [raw, write, delayed_write, binary]),
create_file_1(Fd, 4 bsl 20),
file:close(Fd),
ok.
create_file_1(_Fd, 0) ->
ok;
create_file_1(Fd, M) when M >= 128 ->
ok = file:write(Fd, <<0:(128)/unit:8>>),
create_file_1(Fd, M - 128);
create_file_1(Fd, M) ->
ok = file:write(Fd, <<0:(M)/unit:8>>),
create_file_1(Fd, M - 1).
When writing data it's generally more efficient to write a list of binaries rather than a list of
integers. It is not needed to flatten a deep list before writing. On Unix hosts, scatter output, which
writes a set of buffers in one operation, is used when possible. In this way write(FD, [Bin1, Bin2 |
Bin3]) writes the contents of the binaries without copying the data at all, except for perhaps deep down
in the operating system kernel.
Warning:
If an error occurs when accessing an open file with module io, the process handling the file exits. The
dead file process can hang if a process tries to access it later. This will be fixed in a future release.
SEE ALSO
filename(3erl)