Provided by: libibverbs-dev_50.0-2build2_amd64 
NAME
ibv_modify_qp - modify the attributes of a queue pair (QP)
SYNOPSIS
#include <infiniband/verbs.h>
int ibv_modify_qp(struct ibv_qp *qp, struct ibv_qp_attr *attr,
int attr_mask);
DESCRIPTION
ibv_modify_qp() modifies the attributes of QP qp with the attributes in attr according to the mask
attr_mask. The argument attr is an ibv_qp_attr struct, as defined in <infiniband/verbs.h>.
struct ibv_qp_attr {
enum ibv_qp_state qp_state; /* Move the QP to this state */
enum ibv_qp_state cur_qp_state; /* Assume this is the current QP state */
enum ibv_mtu path_mtu; /* Path MTU (valid only for RC/UC QPs) */
enum ibv_mig_state path_mig_state; /* Path migration state (valid if HCA supports APM) */
uint32_t qkey; /* Q_Key for the QP (valid only for UD QPs) */
uint32_t rq_psn; /* PSN for receive queue (valid only for RC/UC QPs) */
uint32_t sq_psn; /* PSN for send queue */
uint32_t dest_qp_num; /* Destination QP number (valid only for RC/UC QPs) */
unsigned int qp_access_flags; /* Mask of enabled remote access operations (valid only for RC/UC QPs) */
struct ibv_qp_cap cap; /* QP capabilities (valid if HCA supports QP resizing) */
struct ibv_ah_attr ah_attr; /* Primary path address vector (valid only for RC/UC QPs) */
struct ibv_ah_attr alt_ah_attr; /* Alternate path address vector (valid only for RC/UC QPs) */
uint16_t pkey_index; /* Primary P_Key index */
uint16_t alt_pkey_index; /* Alternate P_Key index */
uint8_t en_sqd_async_notify; /* Enable SQD.drained async notification (Valid only if qp_state is SQD) */
uint8_t sq_draining; /* Is the QP draining? Irrelevant for ibv_modify_qp() */
uint8_t max_rd_atomic; /* Number of outstanding RDMA reads & atomic operations on the destination QP (valid only for RC QPs) */
uint8_t max_dest_rd_atomic; /* Number of responder resources for handling incoming RDMA reads & atomic operations (valid only for RC QPs) */
uint8_t min_rnr_timer; /* Minimum RNR NAK timer (valid only for RC QPs) */
uint8_t port_num; /* Primary port number */
uint8_t timeout; /* Local ack timeout for primary path (valid only for RC QPs) */
uint8_t retry_cnt; /* Retry count (valid only for RC QPs) */
uint8_t rnr_retry; /* RNR retry (valid only for RC QPs) */
uint8_t alt_port_num; /* Alternate port number */
uint8_t alt_timeout; /* Local ack timeout for alternate path (valid only for RC QPs) */
uint32_t rate_limit; /* Rate limit in kbps for packet pacing */
};
For details on struct ibv_qp_cap see the description of ibv_create_qp(). For details on struct
ibv_ah_attr see the description of ibv_create_ah().
The argument attr_mask specifies the QP attributes to be modified. The argument is either 0 or the
bitwise OR of one or more of the following flags:
IBV_QP_STATE Modify qp_state
IBV_QP_CUR_STATE Set cur_qp_state
IBV_QP_EN_SQD_ASYNC_NOTIFY Set en_sqd_async_notify
IBV_QP_ACCESS_FLAGS Set qp_access_flags
IBV_QP_PKEY_INDEX Set pkey_index
IBV_QP_PORT Set port_num
IBV_QP_QKEY Set qkey
IBV_QP_AV Set ah_attr
IBV_QP_PATH_MTU Set path_mtu
IBV_QP_TIMEOUT Set timeout
IBV_QP_RETRY_CNT Set retry_cnt
IBV_QP_RNR_RETRY Set rnr_retry
IBV_QP_RQ_PSN Set rq_psn
IBV_QP_MAX_QP_RD_ATOMIC Set max_rd_atomic
IBV_QP_ALT_PATH Set the alternative path via: alt_ah_attr, alt_pkey_index, alt_port_num, alt_timeout
IBV_QP_MIN_RNR_TIMER Set min_rnr_timer
IBV_QP_SQ_PSN Set sq_psn
IBV_QP_MAX_DEST_RD_ATOMIC Set max_dest_rd_atomic
IBV_QP_PATH_MIG_STATE Set path_mig_state
IBV_QP_CAP Set cap
IBV_QP_DEST_QPN Set dest_qp_num
IBV_QP_RATE_LIMIT Set rate_limit
RETURN VALUE
ibv_modify_qp() returns 0 on success, or the value of errno on failure (which indicates the failure
reason).
NOTES
If any of the modify attributes or the modify mask are invalid, none of the attributes will be modified
(including the QP state).
Not all devices support resizing QPs. To check if a device supports it, check if the
IBV_DEVICE_RESIZE_MAX_WR bit is set in the device capabilities flags.
Not all devices support alternate paths. To check if a device supports it, check if the
IBV_DEVICE_AUTO_PATH_MIG bit is set in the device capabilities flags.
The following tables indicate for each QP Transport Service Type, the minimum list of attributes that
must be changed upon transitioning QP state from: Reset --> Init --> RTR --> RTS.
For QP Transport Service Type IBV_QPT_UD:
Next state Required attributes
---------- ----------------------------------------
Init IBV_QP_STATE, IBV_QP_PKEY_INDEX, IBV_QP_PORT,
IBV_QP_QKEY
RTR IBV_QP_STATE
RTS IBV_QP_STATE, IBV_QP_SQ_PSN
For QP Transport Service Type IBV_QPT_UC:
Next state Required attributes
---------- ----------------------------------------
Init IBV_QP_STATE, IBV_QP_PKEY_INDEX, IBV_QP_PORT,
IBV_QP_ACCESS_FLAGS
RTR IBV_QP_STATE, IBV_QP_AV, IBV_QP_PATH_MTU,
IBV_QP_DEST_QPN, IBV_QP_RQ_PSN
RTS IBV_QP_STATE, IBV_QP_SQ_PSN
For QP Transport Service Type IBV_QPT_RC:
Next state Required attributes
---------- ----------------------------------------
Init IBV_QP_STATE, IBV_QP_PKEY_INDEX, IBV_QP_PORT,
IBV_QP_ACCESS_FLAGS
RTR IBV_QP_STATE, IBV_QP_AV, IBV_QP_PATH_MTU,
IBV_QP_DEST_QPN, IBV_QP_RQ_PSN,
IBV_QP_MAX_DEST_RD_ATOMIC, IBV_QP_MIN_RNR_TIMER
RTS IBV_QP_STATE, IBV_QP_SQ_PSN, IBV_QP_MAX_QP_RD_ATOMIC,
IBV_QP_RETRY_CNT, IBV_QP_RNR_RETRY, IBV_QP_TIMEOUT
For QP Transport Service Type IBV_QPT_RAW_PACKET:
Next state Required attributes
---------- ----------------------------------------
Init IBV_QP_STATE, IBV_QP_PORT
RTR IBV_QP_STATE
RTS IBV_QP_STATE
If port flag IBV_QPF_GRH_REQUIRED is set then ah_attr and alt_ah_attr must be passed with definition of
'struct ibv_ah_attr { .is_global = 1; .grh = {...}; }'.
SEE ALSO
ibv_create_qp(3), ibv_destroy_qp(3), ibv_query_qp(3), ibv_create_ah(3)
AUTHORS
Dotan Barak <dotanba@gmail.com>