Provided by: libpcre3-dev_8.39-15build1_amd64 
NAME
PCRE - Perl-compatible regular expressions
BUILDING PCRE
PCRE is distributed with a configure script that can be used to build the library in Unix-
like environments using the applications known as Autotools. Also in the distribution are
files to support building using CMake instead of configure. The text file README contains
general information about building with Autotools (some of which is repeated below), and
also has some comments about building on various operating systems. There is a lot more
information about building PCRE without using Autotools (including information about using
CMake and building "by hand") in the text file called NON-AUTOTOOLS-BUILD. You should
consult this file as well as the README file if you are building in a non-Unix-like
environment.
PCRE BUILD-TIME OPTIONS
The rest of this document describes the optional features of PCRE that can be selected
when the library is compiled. It assumes use of the configure script, where the optional
features are selected or deselected by providing options to configure before running the
make command. However, the same options can be selected in both Unix-like and non-Unix-
like environments using the GUI facility of cmake-gui if you are using CMake instead of
configure to build PCRE.
If you are not using Autotools or CMake, option selection can be done by editing the
config.h file, or by passing parameter settings to the compiler, as described in NON-
AUTOTOOLS-BUILD.
The complete list of options for configure (which includes the standard ones such as the
selection of the installation directory) can be obtained by running
./configure --help
The following sections include descriptions of options whose names begin with --enable or
--disable. These settings specify changes to the defaults for the configure command.
Because of the way that configure works, --enable and --disable always come in pairs, so
the complementary option always exists as well, but as it specifies the default, it is not
described.
BUILDING 8-BIT, 16-BIT AND 32-BIT LIBRARIES
By default, a library called libpcre is built, containing functions that take string
arguments contained in vectors of bytes, either as single-byte characters, or interpreted
as UTF-8 strings. You can also build a separate library, called libpcre16, in which
strings are contained in vectors of 16-bit data units and interpreted either as single-
unit characters or UTF-16 strings, by adding
--enable-pcre16
to the configure command. You can also build yet another separate library, called
libpcre32, in which strings are contained in vectors of 32-bit data units and interpreted
either as single-unit characters or UTF-32 strings, by adding
--enable-pcre32
to the configure command. If you do not want the 8-bit library, add
--disable-pcre8
as well. At least one of the three libraries must be built. Note that the C++ and POSIX
wrappers are for the 8-bit library only, and that pcregrep is an 8-bit program. None of
these are built if you select only the 16-bit or 32-bit libraries.
BUILDING SHARED AND STATIC LIBRARIES
The Autotools PCRE building process uses libtool to build both shared and static libraries
by default. You can suppress one of these by adding one of
--disable-shared
--disable-static
to the configure command, as required.
C++ SUPPORT
By default, if the 8-bit library is being built, the configure script will search for a
C++ compiler and C++ header files. If it finds them, it automatically builds the C++
wrapper library (which supports only 8-bit strings). You can disable this by adding
--disable-cpp
to the configure command.
UTF-8, UTF-16 AND UTF-32 SUPPORT
To build PCRE with support for UTF Unicode character strings, add
--enable-utf
to the configure command. This setting applies to all three libraries, adding support for
UTF-8 to the 8-bit library, support for UTF-16 to the 16-bit library, and support for
UTF-32 to the to the 32-bit library. There are no separate options for enabling UTF-8,
UTF-16 and UTF-32 independently because that would allow ridiculous settings such as
requesting UTF-16 support while building only the 8-bit library. It is not possible to
build one library with UTF support and another without in the same configuration. (For
backwards compatibility, --enable-utf8 is a synonym of --enable-utf.)
Of itself, this setting does not make PCRE treat strings as UTF-8, UTF-16 or UTF-32. As
well as compiling PCRE with this option, you also have have to set the PCRE_UTF8,
PCRE_UTF16 or PCRE_UTF32 option (as appropriate) when you call one of the pattern
compiling functions.
If you set --enable-utf when compiling in an EBCDIC environment, PCRE expects its input to
be either ASCII or UTF-8 (depending on the run-time option). It is not possible to support
both EBCDIC and UTF-8 codes in the same version of the library. Consequently, --enable-utf
and --enable-ebcdic are mutually exclusive.
UNICODE CHARACTER PROPERTY SUPPORT
UTF support allows the libraries to process character codepoints up to 0x10ffff in the
strings that they handle. On its own, however, it does not provide any facilities for
accessing the properties of such characters. If you want to be able to use the pattern
escapes \P, \p, and \X, which refer to Unicode character properties, you must add
--enable-unicode-properties
to the configure command. This implies UTF support, even if you have not explicitly
requested it.
Including Unicode property support adds around 30K of tables to the PCRE library. Only the
general category properties such as Lu and Nd are supported. Details are given in the
pcrepattern documentation.
JUST-IN-TIME COMPILER SUPPORT
Just-in-time compiler support is included in the build by specifying
--enable-jit
This support is available only for certain hardware architectures. If this option is set
for an unsupported architecture, a compile time error occurs. See the pcrejit
documentation for a discussion of JIT usage. When JIT support is enabled, pcregrep
automatically makes use of it, unless you add
--disable-pcregrep-jit
to the "configure" command.
CODE VALUE OF NEWLINE
By default, PCRE interprets the linefeed (LF) character as indicating the end of a line.
This is the normal newline character on Unix-like systems. You can compile PCRE to use
carriage return (CR) instead, by adding
--enable-newline-is-cr
to the configure command. There is also a --enable-newline-is-lf option, which explicitly
specifies linefeed as the newline character.
Alternatively, you can specify that line endings are to be indicated by the two character
sequence CRLF. If you want this, add
--enable-newline-is-crlf
to the configure command. There is a fourth option, specified by
--enable-newline-is-anycrlf
which causes PCRE to recognize any of the three sequences CR, LF, or CRLF as indicating a
line ending. Finally, a fifth option, specified by
--enable-newline-is-any
causes PCRE to recognize any Unicode newline sequence.
Whatever line ending convention is selected when PCRE is built can be overridden when the
library functions are called. At build time it is conventional to use the standard for
your operating system.
WHAT \R MATCHES
By default, the sequence \R in a pattern matches any Unicode newline sequence, whatever
has been selected as the line ending sequence. If you specify
--enable-bsr-anycrlf
the default is changed so that \R matches only CR, LF, or CRLF. Whatever is selected when
PCRE is built can be overridden when the library functions are called.
POSIX MALLOC USAGE
When the 8-bit library is called through the POSIX interface (see the pcreposix
documentation), additional working storage is required for holding the pointers to
capturing substrings, because PCRE requires three integers per substring, whereas the
POSIX interface provides only two. If the number of expected substrings is small, the
wrapper function uses space on the stack, because this is faster than using malloc() for
each call. The default threshold above which the stack is no longer used is 10; it can be
changed by adding a setting such as
--with-posix-malloc-threshold=20
to the configure command.
HANDLING VERY LARGE PATTERNS
Within a compiled pattern, offset values are used to point from one part to another (for
example, from an opening parenthesis to an alternation metacharacter). By default, in the
8-bit and 16-bit libraries, two-byte values are used for these offsets, leading to a
maximum size for a compiled pattern of around 64K. This is sufficient to handle all but
the most gigantic patterns. Nevertheless, some people do want to process truly enormous
patterns, so it is possible to compile PCRE to use three-byte or four-byte offsets by
adding a setting such as
--with-link-size=3
to the configure command. The value given must be 2, 3, or 4. For the 16-bit library, a
value of 3 is rounded up to 4. In these libraries, using longer offsets slows down the
operation of PCRE because it has to load additional data when handling them. For the
32-bit library the value is always 4 and cannot be overridden; the value of --with-link-
size is ignored.
AVOIDING EXCESSIVE STACK USAGE
When matching with the pcre_exec() function, PCRE implements backtracking by making
recursive calls to an internal function called match(). In environments where the size of
the stack is limited, this can severely limit PCRE's operation. (The Unix environment does
not usually suffer from this problem, but it may sometimes be necessary to increase the
maximum stack size. There is a discussion in the pcrestack documentation.) An alternative
approach to recursion that uses memory from the heap to remember data, instead of using
recursive function calls, has been implemented to work round the problem of limited stack
size. If you want to build a version of PCRE that works this way, add
--disable-stack-for-recursion
to the configure command. With this configuration, PCRE will use the pcre_stack_malloc and
pcre_stack_free variables to call memory management functions. By default these point to
malloc() and free(), but you can replace the pointers so that your own functions are used
instead.
Separate functions are provided rather than using pcre_malloc and pcre_free because the
usage is very predictable: the block sizes requested are always the same, and the blocks
are always freed in reverse order. A calling program might be able to implement optimized
functions that perform better than malloc() and free(). PCRE runs noticeably more slowly
when built in this way. This option affects only the pcre_exec() function; it is not
relevant for pcre_dfa_exec().
LIMITING PCRE RESOURCE USAGE
Internally, PCRE has a function called match(), which it calls repeatedly (sometimes
recursively) when matching a pattern with the pcre_exec() function. By controlling the
maximum number of times this function may be called during a single matching operation, a
limit can be placed on the resources used by a single call to pcre_exec(). The limit can
be changed at run time, as described in the pcreapi documentation. The default is 10
million, but this can be changed by adding a setting such as
--with-match-limit=500000
to the configure command. This setting has no effect on the pcre_dfa_exec() matching
function.
In some environments it is desirable to limit the depth of recursive calls of match() more
strictly than the total number of calls, in order to restrict the maximum amount of stack
(or heap, if --disable-stack-for-recursion is specified) that is used. A second limit
controls this; it defaults to the value that is set for --with-match-limit, which imposes
no additional constraints. However, you can set a lower limit by adding, for example,
--with-match-limit-recursion=10000
to the configure command. This value can also be overridden at run time.
CREATING CHARACTER TABLES AT BUILD TIME
PCRE uses fixed tables for processing characters whose code values are less than 256. By
default, PCRE is built with a set of tables that are distributed in the file
pcre_chartables.c.dist. These tables are for ASCII codes only. If you add
--enable-rebuild-chartables
to the configure command, the distributed tables are no longer used. Instead, a program
called dftables is compiled and run. This outputs the source for new set of tables,
created in the default locale of your C run-time system. (This method of replacing the
tables does not work if you are cross compiling, because dftables is run on the local
host. If you need to create alternative tables when cross compiling, you will have to do
so "by hand".)
USING EBCDIC CODE
PCRE assumes by default that it will run in an environment where the character code is
ASCII (or Unicode, which is a superset of ASCII). This is the case for most computer
operating systems. PCRE can, however, be compiled to run in an EBCDIC environment by
adding
--enable-ebcdic
to the configure command. This setting implies --enable-rebuild-chartables. You should
only use it if you know that you are in an EBCDIC environment (for example, an IBM
mainframe operating system). The --enable-ebcdic option is incompatible with --enable-utf.
The EBCDIC character that corresponds to an ASCII LF is assumed to have the value 0x15 by
default. However, in some EBCDIC environments, 0x25 is used. In such an environment you
should use
--enable-ebcdic-nl25
as well as, or instead of, --enable-ebcdic. The EBCDIC character for CR has the same value
as in ASCII, namely, 0x0d. Whichever of 0x15 and 0x25 is not chosen as LF is made to
correspond to the Unicode NEL character (which, in Unicode, is 0x85).
The options that select newline behaviour, such as --enable-newline-is-cr, and equivalent
run-time options, refer to these character values in an EBCDIC environment.
PCREGREP OPTIONS FOR COMPRESSED FILE SUPPORT
By default, pcregrep reads all files as plain text. You can build it so that it recognizes
files whose names end in .gz or .bz2, and reads them with libz or libbz2, respectively, by
adding one or both of
--enable-pcregrep-libz
--enable-pcregrep-libbz2
to the configure command. These options naturally require that the relevant libraries are
installed on your system. Configuration will fail if they are not.
PCREGREP BUFFER SIZE
pcregrep uses an internal buffer to hold a "window" on the file it is scanning, in order
to be able to output "before" and "after" lines when it finds a match. The size of the
buffer is controlled by a parameter whose default value is 20K. The buffer itself is three
times this size, but because of the way it is used for holding "before" lines, the longest
line that is guaranteed to be processable is the parameter size. You can change the
default parameter value by adding, for example,
--with-pcregrep-bufsize=50K
to the configure command. The caller of pcregrep can, however, override this value by
specifying a run-time option.
PCRETEST OPTION FOR LIBREADLINE SUPPORT
If you add
--enable-pcretest-libreadline
to the configure command, pcretest is linked with the libreadline library, and when its
input is from a terminal, it reads it using the readline() function. This provides line-
editing and history facilities. Note that libreadline is GPL-licensed, so if you
distribute a binary of pcretest linked in this way, there may be licensing issues.
Setting this option causes the -lreadline option to be added to the pcretest build. In
many operating environments with a sytem-installed libreadline this is sufficient.
However, in some environments (e.g. if an unmodified distribution version of readline is
in use), some extra configuration may be necessary. The INSTALL file for libreadline says
this:
"Readline uses the termcap functions, but does not link with the
termcap or curses library itself, allowing applications which link
with readline the to choose an appropriate library."
If your environment has not been set up so that an appropriate library is automatically
included, you may need to add something like
LIBS="-ncurses"
immediately before the configure command.
DEBUGGING WITH VALGRIND SUPPORT
By adding the
--enable-valgrind
option to to the configure command, PCRE will use valgrind annotations to mark certain
memory regions as unaddressable. This allows it to detect invalid memory accesses, and is
mostly useful for debugging PCRE itself.
CODE COVERAGE REPORTING
If your C compiler is gcc, you can build a version of PCRE that can generate a code
coverage report for its test suite. To enable this, you must install lcov version 1.6 or
above. Then specify
--enable-coverage
to the configure command and build PCRE in the usual way.
Note that using ccache (a caching C compiler) is incompatible with code coverage
reporting. If you have configured ccache to run automatically on your system, you must set
the environment variable
CCACHE_DISABLE=1
before running make to build PCRE, so that ccache is not used.
When --enable-coverage is used, the following addition targets are added to the Makefile:
make coverage
This creates a fresh coverage report for the PCRE test suite. It is equivalent to running
"make coverage-reset", "make coverage-baseline", "make check", and then "make coverage-
report".
make coverage-reset
This zeroes the coverage counters, but does nothing else.
make coverage-baseline
This captures baseline coverage information.
make coverage-report
This creates the coverage report.
make coverage-clean-report
This removes the generated coverage report without cleaning the coverage data itself.
make coverage-clean-data
This removes the captured coverage data without removing the coverage files created at
compile time (*.gcno).
make coverage-clean
This cleans all coverage data including the generated coverage report. For more
information about code coverage, see the gcov and lcov documentation.
SEE ALSO
pcreapi(3), pcre16, pcre32, pcre_config(3).
AUTHOR
Philip Hazel
University Computing Service
Cambridge CB2 3QH, England.
REVISION
Last updated: 12 May 2013
Copyright (c) 1997-2013 University of Cambridge.