Ubuntu Manpage: pmSetMode, pmSetModeHighRes - set collection time parameters for the current PMAPI context

Provided by: libpcp3-dev_6.2.0-1.1build4_amd64

NAME

       pmSetMode, pmSetModeHighRes - set collection time parameters for the current PMAPI context

C SYNOPSIS

       #include <pcp/pmapi.h>

       int pmSetMode(int mode, const struct timeval *when, int delta);
       int pmSetModeHighRes(int mode, const struct timespec *when, const struct timespec *delta);

       cc ... -lpcp

DESCRIPTION

pmSetMode and pmSetModeHighRes are used to define the collection time and/or mode for
accessing performance metrics and meta-data in the current Performance Metrics Application
Programming Interface (PMAPI) context. This mode affects the semantics of subsequent
calls to the following PMAPI routines: pmFetch(3), pmFetchArchive(3), pmLookupDesc(3),
pmGetInDom(3), pmLookupInDom(3) and pmNameInDom(3).

If mode is PM_MODE_LIVE then all information is returned from the active pool of
performance metrics as of the time that the PMAPI call is made, and the other two
parameters to pmSetMode are ignored. PM_MODE_LIVE is the default mode when a new PMAPI
context of type PM_CONTEXT_HOST is created.

If the mode is not PM_MODE_LIVE, then the when parameter defines a time origin, and all
requests for meta-data (metric descriptions and instance identifiers from the instance
domains) will be processed to reflect the state of the meta-data as of the time origin,
i.e. we use the last state of this information at, or before, the time origin.

If the mode is PM_MODE_INTERP then, in the case of pmFetch(3), the underlying code will
use an interpolation scheme to compute the values of the metrics from the values recorded
for times in the proximity of the time origin. A mode of PM_MODE_INTERP may only be used
with an archive context.

If the mode is PM_MODE_FORW then, in the case of pmFetch(3), the collection of recorded
metric values will be scanned in a forwards direction in time, until values for at least
one of the requested metrics is located after the time origin, and then all requested
metrics stored in the set of archives at that time will be returned with the corresponding
timestamp. A mode of PM_MODE_FORW may only be used with an archive context.

If the mode is PM_MODE_BACK then, the situation is the same as for PM_MODE_FORW, except a
pmFetch(3) will be serviced by scanning the collection of recorded metrics in a backwards
direction in time for metrics before the time origin. A mode of PM_MODE_BACK may only be
used with an archive context.

If the mode is PM_MODE_FORW or PM_MODE_BACK, and no qualifying metrics can be found in the
requested direction of searching before the end or start of the set of archives is found,
then pmFetch(3) returns the special error indicator, PM_ERR_EOL.

For modes other than PM_MODE_LIVE, after each successful pmFetch(3), the time origin is
reset to the timestamp returned via the pmResult structure from pmFetch(3).

The pmSetMode parameter delta defines an additional number of time units that should be
used to adjust the time origin (forwards or backwards), after the new time origin from the
pmResult has been determined. This automatic adjustment of the time origin only occurs
when the mode is PM_MODE_INTERP, and the adjustment is applied, even if the pmFetch(3)
fails because the time origin is outside the range defined by the records in a set of
archives, i.e. returns PM_ERR_EOL.

By default the delta parameter of pmSetMode is interpreted as milliseconds (but see the
LARGE DELTA VALUES section below).

In the pmSetModeHighRes variant of this interface, the delta parameter is a struct
timespec so can directly represent any interval.

Using these mode options, an application can implement replay, playback, fast forward,
reverse, etc. for performance metric values held in the set of archives by alternating
calls to pmSetMode and pmFetch(3).

As a special case, if when is NULL then the mode and delta arguments are used as described
above, but the current time in the archive is not altered.

EXAMPLES

       The following code fragment may be used to dump just those values recorded in  an  archive
       in  correct  temporal  sequence,  for a selected set of performance metrics; this uses the
       default collection time mechanisms.

            pmNewContext(PM_CONTEXT_ARCHIVE, "myarchive");
            while (pmFetch(npmid, pmidlist, &result) != PM_ERR_EOL) {
                /*
                 * process real metric values as of result->timestamp
                 */
                . . .
                pmFreeResult(result);
            }

       Alternatively, to replay interpolated metrics from the archive  in  reverse  chronological
       order,  at  10  second  intervals (of recorded time), the following code fragment could be
       used.

            struct timeval mytime;

            mytime.tv_sec = PM_MAX_TIME_T; /* or use pmGetArchiveEnd(&mtime) */
            pmSetMode(PM_MODE_BACK, &mytime, 0);
            pmFetchArchive(&result);
            mytime = result->timestamp;
            pmFreeResult(result);
            pmSetMode(PM_MODE_INTERP | PM_XTB_SET(PM_TIME_SEC), &mytime, -10);

            while (pmFetch(numpmid, pmidlist, &result) != PM_ERR_EOL) {
                /*
                 * process interpolated metric values as of
                 * result->timestamp
                 */
                . . .
                pmFreeResult(result);
            }

       To perform the same operations, using high resolution time:

            struct timespec mytime, mydelta = { -10, 0 };

            mytime.tv_sec = PM_MAX_TIME_T; /* or use pmGetHighResArchiveEnd(&mtime) */
            pmSetModeHighRes(PM_MODE_BACK, &mytime, NULL);
            pmFetchHighResArchive(&result);
            mytime = result->timestamp;
            pmFreeHighResResult(result);
            pmSetModeHighRes(PM_MODE_INTERP, &mytime, &mydelta);

            while (pmFetchHighRes(numpmid, pmidlist, &result) != PM_ERR_EOL) {
                /*
                 * process interpolated metric values as of
                 * result->timestamp
                 */
                . . .
                pmFreeHighResResult(result);
            }

LARGE DELTA VALUES

       The simplest mechanism to set large values  for  delta  is  to  use  the  pmSetModeHighRes
       interface.   However,  the  pmSetMode  interface  supports  the  XTB  (eXtended Time Base)
       mechanism to allow for values in units other than milliseconds.

       Because the delta parameter to pmSetMode is an int and treated as milliseconds by  default
       there  is  a  limit on the maximum absolute value of delta that can be specified with this
       default interpretation, namely about 24 days if a signed int has 31 bits of precision.  To
       accommodate  longer values of delta the high-order bits of the mode parameter is also used
       to optionally set the units of time for the delta parameter. To specify the units of  time
       use  the  PM_XTB_SET macro with one of the values PM_TIME_NSEC, PM_TIME_MSEC, PM_TIME_SEC,
       etc.  to set the mode as follows:

            PM_MODE_INTERP | PM_XTB_SET(PM_TIME_XXXX)

       The following code shows how this could be done if the desired delta is initially  encoded
       in interval (a struct timeval).

            struct timeval interval;
            int mode;

            mode = ...

            if (abs(interval.tv_sec / (3600*24)) <= 24) {
                /* default encoding of milliseconds is fine */
                mode = PM_MODE_INTERP;
                delta = interval.tv_sec * 1000 + (interval.tv_usec + 500)/ 1000;
            }
            else {
                /* encode delta in units of seconds */
                mode = PM_MODE_INTERP | PM_XTB_SET(PM_TIME_SEC);
                delta = interval.tv_sec + (interval.tv_usec + 500000)/ 1000000;
            }

       For   millisecond  encoding  of  delta,  using  PM_XTB_SET(PM_TIME_MSEC)  is  functionally
       equivalent to not using PM_XTB_SET at all.

DIAGNOSTICS