Ubuntu Manpage: pvm_setopt - Sets libpvm options.

NAME

       pvm_setopt - Sets libpvm options.

SYNOPSIS

       C    int oldval = pvm_setopt( int what, int val )

       Fortran   call pvmfsetopt( what, val, oldval )

PARAMETERS

       what    Integer defining what to set.  One of:
               PvmRoute              1    Message routing policy
               PvmDebugMask          2    Libpvm debug mask
               PvmAutoErr            3    Auto error reporting
               PvmOutputTid          4    Stdout destination for children
               PvmOutputCode         5    Output message tag for children
               PvmTraceTid           6    Trace data destination for children
               PvmTraceCode          7    Trace message tag for children
               PvmTraceBuffer        8    Trace buffer size for children
               PvmTraceOptions       9    Trace collection options for children
               PvmFragSize          10    Message fragment size
               PvmResvTids          11    Allow messages to reserved tags and TIDs
               PvmSelfOutputTid     12    Stdout destination
               PvmSelfOutputCode    13    Output message tag
               PvmSelfTraceTid      14    Trace data destination
               PvmSelfTraceCode     15    Trace message tag
               PvmSelfTraceBuffer   16    Trace buffer size
               PvmSelfTraceOptions  17    Trace collection options
               PvmShowTids          18    pvm_catchout prints task ids with output
               PvmPollType          19    Message wait policy (shared memory)
               PvmPollTime          20    Message spinwait duration
               PvmOutputContext     21    Output message context for children
               PvmTraceContext      22    Trace message context for children
               PvmSelfOutputContext 23    Output message context
               PvmSelfTraceContext  24    Trace message context
               PvmNoReset           25    Do not kill task on reset

       val     Integer specifying new setting of option.

               Predefined values for PvmRoute are:
               PvmDontRoute      1    Don't request or grant connections
               PvmAllowDirect    2    (Default) Don't request but allow
               PvmRouteDirect    3    Request and allow connections

               Predefined values for PvmTraceOptions are:
               PvmTraceFull      1    (Default) Do full trace events
               PvmTraceTime      2    Only do PVM routine timings
               PvmTraceCount     3    Only do PVM routine profiling (call counts)

               Predefined values for PvmPollType are:
               PvmPollConstant   1    Spin on its message queue
               PvmPollSleep      2    Poll the message queue PvmPollTime times

       oldval  Integer returning the previous setting of the option.

DESCRIPTION

The routine pvm_setopt is a general purpose function used to set miscellaneous options in
the PVM library. What is one of:

PvmRoute
Advises PVM on whether to set up direct task-to-task links PvmRouteDirect (using
TCP) for all subsequent communication. Once a link is established it persists
until the application finishes. If a direct link can not be established because
one of the two tasks has requested PvmDontRoute or because adequate resources
aren't available, then the default route through the PVM daemons is used. On
multiprocessors such as Intel Paragon this option is ignored because the
communication between tasks on these machines always uses the native protocol for
direct communication. pvm_setopt can be called multiple times to selectively
establish direct links, but is typically set only once near the beginning of each
task. PvmAllowDirect is the default route setting. This setting on task A allows
other tasks to set up direct links to A. Once a direct link is established between
tasks both tasks will use it for sending messages.

PvmDebugMask
When debugging is turned on, PVM will log detailed information about its operations
and progress on its stderr stream. val is the debugging level. Default is not to
print any debug information.

PvmAutoErr
When an error results from a libpvm function call and PvmAutoErr is set to 1 (the
default), an error message is automatically printed on stderr. A setting of 0
disables this. A setting of 2 causes the library to terminate the task by calling
exit() after printing the error message. A setting of 3 causes the library to
abort after printing the error message.

PvmOutputTid
Sets the stdout destination for children tasks (spawned after the call to
pvm_setopt). Everything printed on the standard output of tasks spawned by the
calling task is packed into messages and sent to the destination. val is the TID
of a PVM task. Setting PvmOutputTid to 0 redirects stdout to the master pvmd,
which writes to the log file /tmp/pvml.<uid> The default setting is inherited from
the parent task, else is 0.

PvmOutputCode
Sets the message tag for standard output messages. Should only be set when a task
has PvmOutputTid set to itself.

PvmTraceTid
Sets the trace data message destination for children tasks (spawned after the call
to pvm_setopt). Libpvm trace data is sent as messages to the destination. val is
the TID of a PVM task. Setting PvmTraceTid to 0 discards trace data. The default
setting is inherited from the parent task, else is 0.

PvmTraceCode
Sets the message tag for trace data messages. Should only be set when a task has
PvmTraceTid set to itself.

PvmTraceBuffer
Sets the trace buffer size for trace event collection (in bytes). Rather than send
a separate message for each trace event, the events are written to a message buffer
until the buffer reaches PvmTraceBuffer bytes. Then a single large trace message
is sent. This can greatly reduce tracing intrusion. Make sure you call pvm_exit()
in your tasks to flush the trace buffer!

PvmTraceOptions
Sets the PVM built-in tracing options. This is useful for custom trace collection
tools to allow analysis of library routine execution times and invocation counts.
By default, tracing with PvmTraceFull produces full trace events with calling
arguments and return values. Using PvmTraceTime produces total time spent
executing each library routine. The PvmTraceCount option keep only a count of the
number of times each routine was called.

PvmFragSize
Val specifies the message fragment size in bytes. Default value varies with host
architecture.

PvmResvTids
A val of 1 enables the task to send messages with reserved tags and to non-task
destinations. The default (0) causes libpvm to generate a PvmBadParam error when a
reserved identifier is specified.

PvmSelfOutputTid
Sets the stdout destination for the calling task. Everything printed on stdout is
packed into messages and sent to the destination. Note: this only works for
spawned tasks, because the pvmd doesn't get the output from tasks started by other
means. val is the TID of a PVM task. Setting PvmSelfOutputTid to 0 redirects
stdout to the master pvmd, which writes to the log file /tmp/pvml.<uid>. The
default setting is inherited from the parent task, else is 0. Setting either
PvmSelfOutputTid or PvmSelfOutputCode also causes both PvmOutputTid and
PvmOutputCode to take on the values of PvmSelfOutputTid and PvmSelfOutputCode,
respectively.

PvmSelfOutputCode
Sets the message tag for standard output messages.

PvmSelfTraceTid
Sets the trace data message destination for the calling task. Libpvm trace data is
sent as messages to the destination. val is the TID of a PVM task. Setting
PvmSelfTraceTid to 0 discards trace data. The default setting is inherited from
the parent task, else is 0. Setting either PvmSelfTraceTid or PvmSelfTraceCode
also causes both PvmTraceTid and PvmTraceCode to take on the values of
PvmSelfTraceTid and PvmSelfTraceCode, respectively.

PvmSelfTraceCode
Sets the message tag for trace data messages.

PvmSelfTraceBuffer
Sets the trace buffer size for trace event collection (in bytes).

PvmSelfTraceOptions
Sets the PVM built-in tracing options for the calling task (see PvmTraceOptions).

PvmShowTids
If true (nonzero), pvm_catchout tags each line of output printed by a child task
with the task id. Otherwise, output is exactly as printed.

PvmPollType
Sets the message wait policy when using shared-memory message transport. Setting
PvmPollType to PvmPollConstant causes the application to spin on its message queue
waiting for a message. Setting PvmPollType to PvmPollSleep causes the application
to poll the message queue for messages PvmPollTime times before pending on the
semaphore.

PvmPollTime
Sets the poll count for applications checking their message queue before they pend
on the semaphore. This option is ignored if PvmPollType is set to PvmPollConstant.

PvmOutputContext
Sets the message context for output collection messages from children.

PvmTraceContext
Sets the message context for trace data messages from children.

PvmSelfOutputContext
Sets the message context for output collection from the calling task.

PvmSelfTraceContext
Sets the message context for trace data messages from the calling task.

PvmNoReset
When set true (non-zero integer value) informs PVM *not* to kill off the calling
task when performing a "reset" command, such as issued by the "pvm" console.

pvm_setopt returns the previous value of the option. If an error occurs, the PVM error
code is returned in place of the option value.

EXAMPLES

       C:
            oldval = pvm_setopt( PvmRoute, PvmRouteDirect );
       Fortran:
            CALL PVMFSETOPT( PVMAUTOERR, 1, OLDVAL )

ERRORS