Provided by: erlang-manpages_25.3.2.8+dfsg-1ubuntu4.4_all 
NAME
re - Perl-like regular expressions for Erlang.
DESCRIPTION
This module contains regular expression matching functions for strings and binaries.
The regular expression syntax and semantics resemble that of Perl.
The matching algorithms of the library are based on the PCRE library, but not all of the PCRE library is
interfaced and some parts of the library go beyond what PCRE offers. Currently PCRE version 8.40 (release
date 2017-01-11) is used. The sections of the PCRE documentation that are relevant to this module are
included here.
Note:
The Erlang literal syntax for strings uses the "\" (backslash) character as an escape code. You need to
escape backslashes in literal strings, both in your code and in the shell, with an extra backslash, that
is, "\\".
DATA TYPES
mp() = {re_pattern, term(), term(), term(), term()}
Opaque data type containing a compiled regular expression. mp() is guaranteed to be a tuple()
having the atom re_pattern as its first element, to allow for matching in guards. The arity of the
tuple or the content of the other fields can change in future Erlang/OTP releases.
nl_spec() = cr | crlf | lf | anycrlf | any
compile_option() =
unicode | anchored | caseless | dollar_endonly | dotall |
extended | firstline | multiline | no_auto_capture |
dupnames | ungreedy |
{newline, nl_spec()} |
bsr_anycrlf | bsr_unicode | no_start_optimize | ucp |
never_utf
EXPORTS
version() -> binary()
The return of this function is a string with the PCRE version of the system that was used in the
Erlang/OTP compilation.
compile(Regexp) -> {ok, MP} | {error, ErrSpec}
Types:
Regexp = iodata()
MP = mp()
ErrSpec =
{ErrString :: string(), Position :: integer() >= 0}
The same as compile(Regexp,[])
compile(Regexp, Options) -> {ok, MP} | {error, ErrSpec}
Types:
Regexp = iodata() | unicode:charlist()
Options = [Option]
Option = compile_option()
MP = mp()
ErrSpec =
{ErrString :: string(), Position :: integer() >= 0}
Compiles a regular expression, with the syntax described below, into an internal format to be used
later as a parameter to run/2 and run/3.
Compiling the regular expression before matching is useful if the same expression is to be used in
matching against multiple subjects during the lifetime of the program. Compiling once and
executing many times is far more efficient than compiling each time one wants to match.
When option unicode is specified, the regular expression is to be specified as a valid Unicode
charlist(), otherwise as any valid iodata().
Options:
unicode:
The regular expression is specified as a Unicode charlist() and the resulting regular
expression code is to be run against a valid Unicode charlist() subject. Also consider option
ucp when using Unicode characters.
anchored:
The pattern is forced to be "anchored", that is, it is constrained to match only at the first
matching point in the string that is searched (the "subject string"). This effect can also be
achieved by appropriate constructs in the pattern itself.
caseless:
Letters in the pattern match both uppercase and lowercase letters. It is equivalent to Perl
option /i and can be changed within a pattern by a (?i) option setting. Uppercase and
lowercase letters are defined as in the ISO 8859-1 character set.
dollar_endonly:
A dollar metacharacter in the pattern matches only at the end of the subject string. Without
this option, a dollar also matches immediately before a newline at the end of the string (but
not before any other newlines). This option is ignored if option multiline is specified. There
is no equivalent option in Perl, and it cannot be set within a pattern.
dotall:
A dot in the pattern matches all characters, including those indicating newline. Without it, a
dot does not match when the current position is at a newline. This option is equivalent to
Perl option /s and it can be changed within a pattern by a (?s) option setting. A negative
class, such as [^a], always matches newline characters, independent of the setting of this
option.
extended:
If this option is set, most white space characters in the pattern are totally ignored except
when escaped or inside a character class. However, white space is not allowed within sequences
such as (?> that introduce various parenthesized subpatterns, nor within a numerical
quantifier such as {1,3}. However, ignorable white space is permitted between an item and a
following quantifier and between a quantifier and a following + that indicates possessiveness.
White space did not used to include the VT character (code 11), because Perl did not treat
this character as white space. However, Perl changed at release 5.18, so PCRE followed at
release 8.34, and VT is now treated as white space.
This also causes characters between an unescaped # outside a character class and the next
newline, inclusive, to be ignored. This is equivalent to Perl's /x option, and it can be
changed within a pattern by a (?x) option setting.
With this option, comments inside complicated patterns can be included. However, notice that
this applies only to data characters. Whitespace characters can never appear within special
character sequences in a pattern, for example within sequence (?( that introduces a
conditional subpattern.
firstline:
An unanchored pattern is required to match before or at the first newline in the subject
string, although the matched text can continue over the newline.
multiline:
By default, PCRE treats the subject string as consisting of a single line of characters (even
if it contains newlines). The "start of line" metacharacter (^) matches only at the start of
the string, while the "end of line" metacharacter ($) matches only at the end of the string,
or before a terminating newline (unless option dollar_endonly is specified). This is the same
as in Perl.
When this option is specified, the "start of line" and "end of line" constructs match
immediately following or immediately before internal newlines in the subject string,
respectively, as well as at the very start and end. This is equivalent to Perl option /m and
can be changed within a pattern by a (?m) option setting. If there are no newlines in a
subject string, or no occurrences of ^ or $ in a pattern, setting multiline has no effect.
no_auto_capture:
Disables the use of numbered capturing parentheses in the pattern. Any opening parenthesis
that is not followed by ? behaves as if it is followed by ?:. Named parentheses can still be
used for capturing (and they acquire numbers in the usual way). There is no equivalent option
in Perl.
dupnames:
Names used to identify capturing subpatterns need not be unique. This can be helpful for
certain types of pattern when it is known that only one instance of the named subpattern can
ever be matched. More details of named subpatterns are provided below.
ungreedy:
Inverts the "greediness" of the quantifiers so that they are not greedy by default, but become
greedy if followed by "?". It is not compatible with Perl. It can also be set by a (?U) option
setting within the pattern.
{newline, NLSpec}:
Overrides the default definition of a newline in the subject string, which is LF (ASCII 10) in
Erlang.
cr:
Newline is indicated by a single character cr (ASCII 13).
lf:
Newline is indicated by a single character LF (ASCII 10), the default.
crlf:
Newline is indicated by the two-character CRLF (ASCII 13 followed by ASCII 10) sequence.
anycrlf:
Any of the three preceding sequences is to be recognized.
any:
Any of the newline sequences above, and the Unicode sequences VT (vertical tab, U+000B), FF
(formfeed, U+000C), NEL (next line, U+0085), LS (line separator, U+2028), and PS (paragraph
separator, U+2029).
bsr_anycrlf:
Specifies specifically that \R is to match only the CR, LF, or CRLF sequences, not the
Unicode-specific newline characters.
bsr_unicode:
Specifies specifically that \R is to match all the Unicode newline characters (including CRLF,
and so on, the default).
no_start_optimize:
Disables optimization that can malfunction if "Special start-of-pattern items" are present in
the regular expression. A typical example would be when matching "DEFABC" against
"(*COMMIT)ABC", where the start optimization of PCRE would skip the subject up to "A" and
never realize that the (*COMMIT) instruction is to have made the matching fail. This option is
only relevant if you use "start-of-pattern items", as discussed in section PCRE Regular
Expression Details.
ucp:
Specifies that Unicode character properties are to be used when resolving \B, \b, \D, \d, \S,
\s, \W and \w. Without this flag, only ISO Latin-1 properties are used. Using Unicode
properties hurts performance, but is semantically correct when working with Unicode characters
beyond the ISO Latin-1 range.
never_utf:
Specifies that the (*UTF) and/or (*UTF8) "start-of-pattern items" are forbidden. This flag
cannot be combined with option unicode. Useful if ISO Latin-1 patterns from an external source
are to be compiled.
inspect(MP, Item) -> {namelist, [binary()]}
Types:
MP = mp()
Item = namelist
Takes a compiled regular expression and an item, and returns the relevant data from the regular
expression. The only supported item is namelist, which returns the tuple {namelist, [binary()]},
containing the names of all (unique) named subpatterns in the regular expression. For example:
1> {ok,MP} = re:compile("(?<A>A)|(?<B>B)|(?<C>C)").
{ok,{re_pattern,3,0,0,
<<69,82,67,80,119,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,
255,255,...>>}}
2> re:inspect(MP,namelist).
{namelist,[<<"A">>,<<"B">>,<<"C">>]}
3> {ok,MPD} = re:compile("(?<C>A)|(?<B>B)|(?<C>C)",[dupnames]).
{ok,{re_pattern,3,0,0,
<<69,82,67,80,119,0,0,0,0,0,8,0,1,0,0,0,255,255,255,255,
255,255,...>>}}
4> re:inspect(MPD,namelist).
{namelist,[<<"B">>,<<"C">>]}
Notice in the second example that the duplicate name only occurs once in the returned list, and
that the list is in alphabetical order regardless of where the names are positioned in the regular
expression. The order of the names is the same as the order of captured subexpressions if
{capture, all_names} is specified as an option to run/3. You can therefore create a name-to-value
mapping from the result of run/3 like this:
1> {ok,MP} = re:compile("(?<A>A)|(?<B>B)|(?<C>C)").
{ok,{re_pattern,3,0,0,
<<69,82,67,80,119,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,
255,255,...>>}}
2> {namelist, N} = re:inspect(MP,namelist).
{namelist,[<<"A">>,<<"B">>,<<"C">>]}
3> {match,L} = re:run("AA",MP,[{capture,all_names,binary}]).
{match,[<<"A">>,<<>>,<<>>]}
4> NameMap = lists:zip(N,L).
[{<<"A">>,<<"A">>},{<<"B">>,<<>>},{<<"C">>,<<>>}]
replace(Subject, RE, Replacement) -> iodata() | unicode:charlist()
Types:
Subject = iodata() | unicode:charlist()
RE = mp() | iodata()
Replacement = iodata() | unicode:charlist()
Same as replace(Subject, RE, Replacement, []).
replace(Subject, RE, Replacement, Options) ->
iodata() | unicode:charlist()
Types:
Subject = iodata() | unicode:charlist()
RE = mp() | iodata() | unicode:charlist()
Replacement = iodata() | unicode:charlist()
Options = [Option]
Option =
anchored | global | notbol | noteol | notempty |
notempty_atstart |
{offset, integer() >= 0} |
{newline, NLSpec} |
bsr_anycrlf |
{match_limit, integer() >= 0} |
{match_limit_recursion, integer() >= 0} |
bsr_unicode |
{return, ReturnType} |
CompileOpt
ReturnType = iodata | list | binary
CompileOpt = compile_option()
NLSpec = cr | crlf | lf | anycrlf | any
Replaces the matched part of the Subject string with the contents of Replacement.
The permissible options are the same as for run/3, except that option capture is not allowed.
Instead a {return, ReturnType} is present. The default return type is iodata, constructed in a way
to minimize copying. The iodata result can be used directly in many I/O operations. If a flat
list() is desired, specify {return, list}. If a binary is desired, specify {return, binary}.
As in function run/3, an mp() compiled with option unicode requires Subject to be a Unicode
charlist(). If compilation is done implicitly and the unicode compilation option is specified to
this function, both the regular expression and Subject are to specified as valid Unicode
charlist()s.
The replacement string can contain the special character &, which inserts the whole matching
expression in the result, and the special sequence \N (where N is an integer > 0), \gN, or \g{N},
resulting in the subexpression number N, is inserted in the result. If no subexpression with that
number is generated by the regular expression, nothing is inserted.
To insert an & or a \ in the result, precede it with a \. Notice that Erlang already gives a
special meaning to \ in literal strings, so a single \ must be written as "\\" and therefore a
double \ as "\\\\".
Example:
re:replace("abcd","c","[&]",[{return,list}]).
gives
"ab[c]d"
while
re:replace("abcd","c","[\\&]",[{return,list}]).
gives
"ab[&]d"
As with run/3, compilation errors raise the badarg exception. compile/2 can be used to get more
information about the error.
run(Subject, RE) -> {match, Captured} | nomatch
Types:
Subject = iodata() | unicode:charlist()
RE = mp() | iodata()
Captured = [CaptureData]
CaptureData = {integer(), integer()}
Same as run(Subject,RE,[]).
run(Subject, RE, Options) ->
{match, Captured} | match | nomatch | {error, ErrType}
Types:
Subject = iodata() | unicode:charlist()
RE = mp() | iodata() | unicode:charlist()
Options = [Option]
Option =
anchored | global | notbol | noteol | notempty |
notempty_atstart | report_errors |
{offset, integer() >= 0} |
{match_limit, integer() >= 0} |
{match_limit_recursion, integer() >= 0} |
{newline, NLSpec :: nl_spec()} |
bsr_anycrlf | bsr_unicode |
{capture, ValueSpec} |
{capture, ValueSpec, Type} |
CompileOpt
Type = index | list | binary
ValueSpec =
all | all_but_first | all_names | first | none | ValueList
ValueList = [ValueID]
ValueID = integer() | string() | atom()
CompileOpt = compile_option()
See compile/2.
Captured = [CaptureData] | [[CaptureData]]
CaptureData =
{integer(), integer()} | ListConversionData | binary()
ListConversionData =
string() |
{error, string(), binary()} |
{incomplete, string(), binary()}
ErrType =
match_limit | match_limit_recursion | {compile, CompileErr}
CompileErr =
{ErrString :: string(), Position :: integer() >= 0}
Executes a regular expression matching, and returns match/{match, Captured} or nomatch. The
regular expression can be specified either as iodata() in which case it is automatically compiled
(as by compile/2) and executed, or as a precompiled mp() in which case it is executed against the
subject directly.
When compilation is involved, exception badarg is thrown if a compilation error occurs. Call
compile/2 to get information about the location of the error in the regular expression.
If the regular expression is previously compiled, the option list can only contain the following
options:
* anchored
* {capture, ValueSpec}/{capture, ValueSpec, Type}
* global
* {match_limit, integer() >= 0}
* {match_limit_recursion, integer() >= 0}
* {newline, NLSpec}
* notbol
* notempty
* notempty_atstart
* noteol
* {offset, integer() >= 0}
* report_errors
Otherwise all options valid for function compile/2 are also allowed. Options allowed both for
compilation and execution of a match, namely anchored and {newline, NLSpec}, affect both the
compilation and execution if present together with a non-precompiled regular expression.
If the regular expression was previously compiled with option unicode, Subject is to be provided
as a valid Unicode charlist(), otherwise any iodata() will do. If compilation is involved and
option unicode is specified, both Subject and the regular expression are to be specified as valid
Unicode charlists().
{capture, ValueSpec}/{capture, ValueSpec, Type} defines what to return from the function upon
successful matching. The capture tuple can contain both a value specification, telling which of
the captured substrings are to be returned, and a type specification, telling how captured
substrings are to be returned (as index tuples, lists, or binaries). The options are described in
detail below.
If the capture options describe that no substring capturing is to be done ({capture, none}), the
function returns the single atom match upon successful matching, otherwise the tuple {match,
ValueList}. Disabling capturing can be done either by specifying none or an empty list as
ValueSpec.
Option report_errors adds the possibility that an error tuple is returned. The tuple either
indicates a matching error (match_limit or match_limit_recursion), or a compilation error, where
the error tuple has the format {error, {compile, CompileErr}}. Notice that if option report_errors
is not specified, the function never returns error tuples, but reports compilation errors as a
badarg exception and failed matches because of exceeded match limits simply as nomatch.
The following options are relevant for execution:
anchored:
Limits run/3 to matching at the first matching position. If a pattern was compiled with
anchored, or turned out to be anchored by virtue of its contents, it cannot be made unanchored
at matching time, hence there is no unanchored option.
global:
Implements global (repetitive) search (flag g in Perl). Each match is returned as a separate
list() containing the specific match and any matching subexpressions (or as specified by
option capture. The Captured part of the return value is hence a list() of list()s when this
option is specified.
The interaction of option global with a regular expression that matches an empty string
surprises some users. When option global is specified, run/3 handles empty matches in the same
way as Perl: a zero-length match at any point is also retried with options [anchored,
notempty_atstart]. If that search gives a result of length > 0, the result is included.
Example:
re:run("cat","(|at)",[global]).
The following matchings are performed:
At offset 0:
The regular expression (|at) first match at the initial position of string cat, giving the
result set [{0,0},{0,0}] (the second {0,0} is because of the subexpression marked by the
parentheses). As the length of the match is 0, we do not advance to the next position yet.
At offset 0 with [anchored, notempty_atstart]:
The search is retried with options [anchored, notempty_atstart] at the same position, which
does not give any interesting result of longer length, so the search position is advanced to
the next character (a).
At offset 1:
The search results in [{1,0},{1,0}], so this search is also repeated with the extra options.
At offset 1 with [anchored, notempty_atstart]:
Alternative ab is found and the result is [{1,2},{1,2}]. The result is added to the list of
results and the position in the search string is advanced two steps.
At offset 3:
The search once again matches the empty string, giving [{3,0},{3,0}].
At offset 1 with [anchored, notempty_atstart]:
This gives no result of length > 0 and we are at the last position, so the global search is
complete.
The result of the call is:
{match,[[{0,0},{0,0}],[{1,0},{1,0}],[{1,2},{1,2}],[{3,0},{3,0}]]}
notempty:
An empty string is not considered to be a valid match if this option is specified. If
alternatives in the pattern exist, they are tried. If all the alternatives match the empty
string, the entire match fails.
Example:
If the following pattern is applied to a string not beginning with "a" or "b", it would
normally match the empty string at the start of the subject:
a?b?
With option notempty, this match is invalid, so run/3 searches further into the string for
occurrences of "a" or "b".
notempty_atstart:
Like notempty, except that an empty string match that is not at the start of the subject is
permitted. If the pattern is anchored, such a match can occur only if the pattern contains \K.
Perl has no direct equivalent of notempty or notempty_atstart, but it does make a special case
of a pattern match of the empty string within its split() function, and when using modifier
/g. The Perl behavior can be emulated after matching a null string by first trying the match
again at the same offset with notempty_atstart and anchored, and then, if that fails, by
advancing the starting offset (see below) and trying an ordinary match again.
notbol:
Specifies that the first character of the subject string is not the beginning of a line, so
the circumflex metacharacter is not to match before it. Setting this without multiline (at
compile time) causes circumflex never to match. This option only affects the behavior of the
circumflex metacharacter. It does not affect \\A.
noteol:
Specifies that the end of the subject string is not the end of a line, so the dollar
metacharacter is not to match it nor (except in multiline mode) a newline immediately before
it. Setting this without multiline (at compile time) causes dollar never to match. This option
affects only the behavior of the dollar metacharacter. It does not affect \\Z or \\z.
report_errors:
Gives better control of the error handling in run/3. When specified, compilation errors (if
the regular expression is not already compiled) and runtime errors are explicitly returned as
an error tuple.
The following are the possible runtime errors:
match_limit:
The PCRE library sets a limit on how many times the internal match function can be called.
Defaults to 10,000,000 in the library compiled for Erlang. If {error, match_limit} is
returned, the execution of the regular expression has reached this limit. This is normally
to be regarded as a nomatch, which is the default return value when this occurs, but by
specifying report_errors, you are informed when the match fails because of too many internal
calls.
match_limit_recursion:
This error is very similar to match_limit, but occurs when the internal match function of
PCRE is "recursively" called more times than the match_limit_recursion limit, which defaults
to 10,000,000 as well. Notice that as long as the match_limit and match_limit_default values
are kept at the default values, the match_limit_recursion error cannot occur, as the
match_limit error occurs before that (each recursive call is also a call, but not
conversely). Both limits can however be changed, either by setting limits directly in the
regular expression string (see section PCRE Regular Eexpression Details) or by specifying
options to run/3.
It is important to understand that what is referred to as "recursion" when limiting matches is
not recursion on the C stack of the Erlang machine or on the Erlang process stack. The PCRE
version compiled into the Erlang VM uses machine "heap" memory to store values that must be
kept over recursion in regular expression matches.
{match_limit, integer() >= 0}:
Limits the execution time of a match in an implementation-specific way. It is described as
follows by the PCRE documentation:
The match_limit field provides a means of preventing PCRE from using
up a vast amount of resources when running patterns that are not going
to match, but which have a very large number of possibilities in their
search trees. The classic example is a pattern that uses nested
unlimited repeats.
Internally, pcre_exec() uses a function called match(), which it calls
repeatedly (sometimes recursively). The limit set by match_limit is
imposed on the number of times this function is called during a match,
which has the effect of limiting the amount of backtracking that can
take place. For patterns that are not anchored, the count restarts
from zero for each position in the subject string.
This means that runaway regular expression matches can fail faster if the limit is lowered
using this option. The default value 10,000,000 is compiled into the Erlang VM.
Note:
This option does in no way affect the execution of the Erlang VM in terms of "long running
BIFs". run/3 always gives control back to the scheduler of Erlang processes at intervals that
ensures the real-time properties of the Erlang system.
{match_limit_recursion, integer() >= 0}:
Limits the execution time and memory consumption of a match in an implementation-specific way,
very similar to match_limit. It is described as follows by the PCRE documentation:
The match_limit_recursion field is similar to match_limit, but instead
of limiting the total number of times that match() is called, it
limits the depth of recursion. The recursion depth is a smaller number
than the total number of calls, because not all calls to match() are
recursive. This limit is of use only if it is set smaller than
match_limit.
Limiting the recursion depth limits the amount of machine stack that
can be used, or, when PCRE has been compiled to use memory on the heap
instead of the stack, the amount of heap memory that can be used.
The Erlang VM uses a PCRE library where heap memory is used when regular expression match
recursion occurs. This therefore limits the use of machine heap, not C stack.
Specifying a lower value can result in matches with deep recursion failing, when they should
have matched:
1> re:run("aaaaaaaaaaaaaz","(a+)*z").
{match,[{0,14},{0,13}]}
2> re:run("aaaaaaaaaaaaaz","(a+)*z",[{match_limit_recursion,5}]).
nomatch
3> re:run("aaaaaaaaaaaaaz","(a+)*z",[{match_limit_recursion,5},report_errors]).
{error,match_limit_recursion}
This option and option match_limit are only to be used in rare cases. Understanding of the
PCRE library internals is recommended before tampering with these limits.
{offset, integer() >= 0}:
Start matching at the offset (position) specified in the subject string. The offset is zero-
based, so that the default is {offset,0} (all of the subject string).
{newline, NLSpec}:
Overrides the default definition of a newline in the subject string, which is LF (ASCII 10) in
Erlang.
cr:
Newline is indicated by a single character CR (ASCII 13).
lf:
Newline is indicated by a single character LF (ASCII 10), the default.
crlf:
Newline is indicated by the two-character CRLF (ASCII 13 followed by ASCII 10) sequence.
anycrlf:
Any of the three preceding sequences is be recognized.
any:
Any of the newline sequences above, and the Unicode sequences VT (vertical tab, U+000B), FF
(formfeed, U+000C), NEL (next line, U+0085), LS (line separator, U+2028), and PS (paragraph
separator, U+2029).
bsr_anycrlf:
Specifies specifically that \R is to match only the CR LF, or CRLF sequences, not the Unicode-
specific newline characters. (Overrides the compilation option.)
bsr_unicode:
Specifies specifically that \R is to match all the Unicode newline characters (including CRLF,
and so on, the default). (Overrides the compilation option.)
{capture, ValueSpec}/{capture, ValueSpec, Type}:
Specifies which captured substrings are returned and in what format. By default, run/3
captures all of the matching part of the substring and all capturing subpatterns (all of the
pattern is automatically captured). The default return type is (zero-based) indexes of the
captured parts of the string, specified as {Offset,Length} pairs (the index Type of
capturing).
As an example of the default behavior, the following call returns, as first and only captured
string, the matching part of the subject ("abcd" in the middle) as an index pair {3,4}, where
character positions are zero-based, just as in offsets:
re:run("ABCabcdABC","abcd",[]).
The return value of this call is:
{match,[{3,4}]}
Another (and quite common) case is where the regular expression matches all of the subject:
re:run("ABCabcdABC",".*abcd.*",[]).
Here the return value correspondingly points out all of the string, beginning at index 0, and
it is 10 characters long:
{match,[{0,10}]}
If the regular expression contains capturing subpatterns, like in:
re:run("ABCabcdABC",".*(abcd).*",[]).
all of the matched subject is captured, as well as the captured substrings:
{match,[{0,10},{3,4}]}
The complete matching pattern always gives the first return value in the list and the
remaining subpatterns are added in the order they occurred in the regular expression.
The capture tuple is built up as follows:
ValueSpec:
Specifies which captured (sub)patterns are to be returned. ValueSpec can either be an atom
describing a predefined set of return values, or a list containing the indexes or the names
of specific subpatterns to return.
The following are the predefined sets of subpatterns:
all:
All captured subpatterns including the complete matching string. This is the default.
all_names:
All named subpatterns in the regular expression, as if a list() of all the names in
alphabetical order was specified. The list of all names can also be retrieved with
inspect/2.
first:
Only the first captured subpattern, which is always the complete matching part of the
subject. All explicitly captured subpatterns are discarded.
all_but_first:
All but the first matching subpattern, that is, all explicitly captured subpatterns, but
not the complete matching part of the subject string. This is useful if the regular
expression as a whole matches a large part of the subject, but the part you are interested
in is in an explicitly captured subpattern. If the return type is list or binary, not
returning subpatterns you are not interested in is a good way to optimize.
none:
Returns no matching subpatterns, gives the single atom match as the return value of the
function when matching successfully instead of the {match, list()} return. Specifying an
empty list gives the same behavior.
The value list is a list of indexes for the subpatterns to return, where index 0 is for all
of the pattern, and 1 is for the first explicit capturing subpattern in the regular
expression, and so on. When using named captured subpatterns (see below) in the regular
expression, one can use atom()s or string()s to specify the subpatterns to be returned. For
example, consider the regular expression:
".*(abcd).*"
matched against string "ABCabcdABC", capturing only the "abcd" part (the first explicit
subpattern):
re:run("ABCabcdABC",".*(abcd).*",[{capture,[1]}]).
The call gives the following result, as the first explicitly captured subpattern is
"(abcd)", matching "abcd" in the subject, at (zero-based) position 3, of length 4:
{match,[{3,4}]}
Consider the same regular expression, but with the subpattern explicitly named 'FOO':
".*(?<FOO>abcd).*"
With this expression, we could still give the index of the subpattern with the following
call:
re:run("ABCabcdABC",".*(?<FOO>abcd).*",[{capture,[1]}]).
giving the same result as before. But, as the subpattern is named, we can also specify its
name in the value list:
re:run("ABCabcdABC",".*(?<FOO>abcd).*",[{capture,['FOO']}]).
This would give the same result as the earlier examples, namely:
{match,[{3,4}]}
The values list can specify indexes or names not present in the regular expression, in which
case the return values vary depending on the type. If the type is index, the tuple {-1,0} is
returned for values with no corresponding subpattern in the regular expression, but for the
other types (binary and list), the values are the empty binary or list, respectively.
Type:
Optionally specifies how captured substrings are to be returned. If omitted, the default of
index is used.
Type can be one of the following:
index:
Returns captured substrings as pairs of byte indexes into the subject string and length of
the matching string in the subject (as if the subject string was flattened with
erlang:iolist_to_binary/1 or unicode:characters_to_binary/2 before matching). Notice that
option unicode results in byte-oriented indexes in a (possibly virtual) UTF-8 encoded
binary. A byte index tuple {0,2} can therefore represent one or two characters when
unicode is in effect. This can seem counter-intuitive, but has been deemed the most
effective and useful way to do it. To return lists instead can result in simpler code if
that is desired. This return type is the default.
list:
Returns matching substrings as lists of characters (Erlang string()s). It option unicode
is used in combination with the \C sequence in the regular expression, a captured
subpattern can contain bytes that are not valid UTF-8 (\C matches bytes regardless of
character encoding). In that case the list capturing can result in the same types of
tuples that unicode:characters_to_list/2 can return, namely three-tuples with tag
incomplete or error, the successfully converted characters and the invalid UTF-8 tail of
the conversion as a binary. The best strategy is to avoid using the \C sequence when
capturing lists.
binary:
Returns matching substrings as binaries. If option unicode is used, these binaries are in
UTF-8. If the \C sequence is used together with unicode, the binaries can be invalid
UTF-8.
In general, subpatterns that were not assigned a value in the match are returned as the tuple
{-1,0} when type is index. Unassigned subpatterns are returned as the empty binary or list,
respectively, for other return types. Consider the following regular expression:
".*((?<FOO>abdd)|a(..d)).*"
There are three explicitly capturing subpatterns, where the opening parenthesis position
determines the order in the result, hence ((?<FOO>abdd)|a(..d)) is subpattern index 1,
(?<FOO>abdd) is subpattern index 2, and (..d) is subpattern index 3. When matched against the
following string:
"ABCabcdABC"
the subpattern at index 2 does not match, as "abdd" is not present in the string, but the
complete pattern matches (because of the alternative a(..d)). The subpattern at index 2 is
therefore unassigned and the default return value is:
{match,[{0,10},{3,4},{-1,0},{4,3}]}
Setting the capture Type to binary gives:
{match,[<<"ABCabcdABC">>,<<"abcd">>,<<>>,<<"bcd">>]}
Here the empty binary (<<>>) represents the unassigned subpattern. In the binary case, some
information about the matching is therefore lost, as <<>> can also be an empty string
captured.
If differentiation between empty matches and non-existing subpatterns is necessary, use the
type index and do the conversion to the final type in Erlang code.
When option global is speciified, the capture specification affects each match separately, so
that:
re:run("cacb","c(a|b)",[global,{capture,[1],list}]).
gives
{match,[["a"],["b"]]}
For a descriptions of options only affecting the compilation step, see compile/2.
split(Subject, RE) -> SplitList
Types:
Subject = iodata() | unicode:charlist()
RE = mp() | iodata()
SplitList = [iodata() | unicode:charlist()]
Same as split(Subject, RE, []).
split(Subject, RE, Options) -> SplitList
Types:
Subject = iodata() | unicode:charlist()
RE = mp() | iodata() | unicode:charlist()
Options = [Option]
Option =
anchored | notbol | noteol | notempty | notempty_atstart |
{offset, integer() >= 0} |
{newline, nl_spec()} |
{match_limit, integer() >= 0} |
{match_limit_recursion, integer() >= 0} |
bsr_anycrlf | bsr_unicode |
{return, ReturnType} |
{parts, NumParts} |
group | trim | CompileOpt
NumParts = integer() >= 0 | infinity
ReturnType = iodata | list | binary
CompileOpt = compile_option()
See compile/2.
SplitList = [RetData] | [GroupedRetData]
GroupedRetData = [RetData]
RetData = iodata() | unicode:charlist() | binary() | list()
Splits the input into parts by finding tokens according to the regular expression supplied. The
splitting is basically done by running a global regular expression match and dividing the initial
string wherever a match occurs. The matching part of the string is removed from the output.
As in run/3, an mp() compiled with option unicode requires Subject to be a Unicode charlist(). If
compilation is done implicitly and the unicode compilation option is specified to this function,
both the regular expression and Subject are to be specified as valid Unicode charlist()s.
The result is given as a list of "strings", the preferred data type specified in option return
(default iodata).
If subexpressions are specified in the regular expression, the matching subexpressions are
returned in the resulting list as well. For example:
re:split("Erlang","[ln]",[{return,list}]).
gives
["Er","a","g"]
while
re:split("Erlang","([ln])",[{return,list}]).
gives
["Er","l","a","n","g"]
The text matching the subexpression (marked by the parentheses in the regular expression) is
inserted in the result list where it was found. This means that concatenating the result of a
split where the whole regular expression is a single subexpression (as in the last example) always
results in the original string.
As there is no matching subexpression for the last part in the example (the "g"), nothing is
inserted after that. To make the group of strings and the parts matching the subexpressions more
obvious, one can use option group, which groups together the part of the subject string with the
parts matching the subexpressions when the string was split:
re:split("Erlang","([ln])",[{return,list},group]).
gives
[["Er","l"],["a","n"],["g"]]
Here the regular expression first matched the "l", causing "Er" to be the first part in the
result. When the regular expression matched, the (only) subexpression was bound to the "l", so the
"l" is inserted in the group together with "Er". The next match is of the "n", making "a" the next
part to be returned. As the subexpression is bound to substring "n" in this case, the "n" is
inserted into this group. The last group consists of the remaining string, as no more matches are
found.
By default, all parts of the string, including the empty strings, are returned from the function,
for example:
re:split("Erlang","[lg]",[{return,list}]).
gives
["Er","an",[]]
as the matching of the "g" in the end of the string leaves an empty rest, which is also returned.
This behavior differs from the default behavior of the split function in Perl, where empty strings
at the end are by default removed. To get the "trimming" default behavior of Perl, specify trim as
an option:
re:split("Erlang","[lg]",[{return,list},trim]).
gives
["Er","an"]
The "trim" option says; "give me as many parts as possible except the empty ones", which sometimes
can be useful. You can also specify how many parts you want, by specifying {parts,N}:
re:split("Erlang","[lg]",[{return,list},{parts,2}]).
gives
["Er","ang"]
Notice that the last part is "ang", not "an", as splitting was specified into two parts, and the
splitting stops when enough parts are given, which is why the result differs from that of trim.
More than three parts are not possible with this indata, so
re:split("Erlang","[lg]",[{return,list},{parts,4}]).
gives the same result as the default, which is to be viewed as "an infinite number of parts".
Specifying 0 as the number of parts gives the same effect as option trim. If subexpressions are
captured, empty subexpressions matched at the end are also stripped from the result if trim or
{parts,0} is specified.
The trim behavior corresponds exactly to the Perl default. {parts,N}, where N is a positive
integer, corresponds exactly to the Perl behavior with a positive numerical third parameter. The
default behavior of split/3 corresponds to the Perl behavior when a negative integer is specified
as the third parameter for the Perl routine.
Summary of options not previously described for function run/3:
{return,ReturnType}:
Specifies how the parts of the original string are presented in the result list. Valid types:
iodata:
The variant of iodata() that gives the least copying of data with the current implementation
(often a binary, but do not depend on it).
binary:
All parts returned as binaries.
list:
All parts returned as lists of characters ("strings").
group:
Groups together the part of the string with the parts of the string matching the
subexpressions of the regular expression.
The return value from the function is in this case a list() of list()s. Each sublist begins
with the string picked out of the subject string, followed by the parts matching each of the
subexpressions in order of occurrence in the regular expression.
{parts,N}:
Specifies the number of parts the subject string is to be split into.
The number of parts is to be a positive integer for a specific maximum number of parts, and
infinity for the maximum number of parts possible (the default). Specifying {parts,0} gives as
many parts as possible disregarding empty parts at the end, the same as specifying trim.
trim:
Specifies that empty parts at the end of the result list are to be disregarded. The same as
specifying {parts,0}. This corresponds to the default behavior of the split built-in function
in Perl.
PERL-LIKE REGULAR EXPRESSION SYNTAX
The following sections contain reference material for the regular expressions used by this module. The
information is based on the PCRE documentation, with changes where this module behaves differently to the
PCRE library.
PCRE REGULAR EXPRESSION DETAILS
The syntax and semantics of the regular expressions supported by PCRE are described in detail in the
following sections. Perl's regular expressions are described in its own documentation, and regular
expressions in general are covered in many books, some with copious examples. Jeffrey Friedl's "Mastering
Regular Expressions", published by O'Reilly, covers regular expressions in great detail. This description
of the PCRE regular expressions is intended as reference material.
The reference material is divided into the following sections:
* Special Start-of-Pattern Items
* Characters and Metacharacters
* Backslash
* Circumflex and Dollar
* Full Stop (Period, Dot) and \N
* Matching a Single Data Unit
* Square Brackets and Character Classes
* Posix Character Classes
* Vertical Bar
* Internal Option Setting
* Subpatterns
* Duplicate Subpattern Numbers
* Named Subpatterns
* Repetition
* Atomic Grouping and Possessive Quantifiers
* Back References
* Assertions
* Conditional Subpatterns
* Comments
* Recursive Patterns
* Subpatterns as Subroutines
* Oniguruma Subroutine Syntax
* Backtracking Control
SPECIAL START-OF-PATTERN ITEMS
Some options that can be passed to compile/2 can also be set by special items at the start of a pattern.
These are not Perl-compatible, but are provided to make these options accessible to pattern writers who
are not able to change the program that processes the pattern. Any number of these items can appear, but
they must all be together right at the start of the pattern string, and the letters must be in upper
case.
UTF Support
Unicode support is basically UTF-8 based. To use Unicode characters, you either call compile/2 or run/3
with option unicode, or the pattern must start with one of these special sequences:
(*UTF8)
(*UTF)
Both options give the same effect, the input string is interpreted as UTF-8. Notice that with these
instructions, the automatic conversion of lists to UTF-8 is not performed by the re functions. Therefore,
using these sequences is not recommended. Add option unicode when running compile/2 instead.
Some applications that allow their users to supply patterns can wish to restrict them to non-UTF data for
security reasons. If option never_utf is set at compile time, (*UTF), and so on, are not allowed, and
their appearance causes an error.
Unicode Property Support
The following is another special sequence that can appear at the start of a pattern:
(*UCP)
This has the same effect as setting option ucp: it causes sequences such as \d and \w to use Unicode
properties to determine character types, instead of recognizing only characters with codes < 256 through
a lookup table.
Disabling Startup Optimizations
If a pattern starts with (*NO_START_OPT), it has the same effect as setting option no_start_optimize at
compile time.
Newline Conventions
PCRE supports five conventions for indicating line breaks in strings: a single CR (carriage return)
character, a single LF (line feed) character, the two-character sequence CRLF, any of the three
preceding, and any Unicode newline sequence.
A newline convention can also be specified by starting a pattern string with one of the following five
sequences:
(*CR):
Carriage return
(*LF):
Line feed
(*CRLF):
>Carriage return followed by line feed
(*ANYCRLF):
Any of the three above
(*ANY):
All Unicode newline sequences
These override the default and the options specified to compile/2. For example, the following pattern
changes the convention to CR:
(*CR)a.b
This pattern matches a\nb, as LF is no longer a newline. If more than one of them is present, the last
one is used.
The newline convention affects where the circumflex and dollar assertions are true. It also affects the
interpretation of the dot metacharacter when dotall is not set, and the behavior of \N. However, it does
not affect what the \R escape sequence matches. By default, this is any Unicode newline sequence, for
Perl compatibility. However, this can be changed; see the description of \R in section Newline Sequences.
A change of the \R setting can be combined with a change of the newline convention.
Setting Match and Recursion Limits
The caller of run/3 can set a limit on the number of times the internal match() function is called and on
the maximum depth of recursive calls. These facilities are provided to catch runaway matches that are
provoked by patterns with huge matching trees (a typical example is a pattern with nested unlimited
repeats) and to avoid running out of system stack by too much recursion. When one of these limits is
reached, pcre_exec() gives an error return. The limits can also be set by items at the start of the
pattern of the following forms:
(*LIMIT_MATCH=d)
(*LIMIT_RECURSION=d)
Here d is any number of decimal digits. However, the value of the setting must be less than the value set
by the caller of run/3 for it to have any effect. That is, the pattern writer can lower the limit set by
the programmer, but not raise it. If there is more than one setting of one of these limits, the lower
value is used.
The default value for both the limits is 10,000,000 in the Erlang VM. Notice that the recursion limit
does not affect the stack depth of the VM, as PCRE for Erlang is compiled in such a way that the match
function never does recursion on the C stack.
Note that LIMIT_MATCH and LIMIT_RECURSION can only reduce the value of the limits set by the caller, not
increase them.
CHARACTERS AND METACHARACTERS
A regular expression is a pattern that is matched against a subject string from left to right. Most
characters stand for themselves in a pattern and match the corresponding characters in the subject. As a
trivial example, the following pattern matches a portion of a subject string that is identical to itself:
The quick brown fox
When caseless matching is specified (option caseless), letters are matched independently of case.
The power of regular expressions comes from the ability to include alternatives and repetitions in the
pattern. These are encoded in the pattern by the use of metacharacters, which do not stand for themselves
but instead are interpreted in some special way.
Two sets of metacharacters exist: those that are recognized anywhere in the pattern except within square
brackets, and those that are recognized within square brackets. Outside square brackets, the
metacharacters are as follows:
\:
General escape character with many uses
^:
Assert start of string (or line, in multiline mode)
$:
Assert end of string (or line, in multiline mode)
.:
Match any character except newline (by default)
[:
Start character class definition
|:
Start of alternative branch
(:
Start subpattern
):
End subpattern
?:
Extends the meaning of (, also 0 or 1 quantifier, also quantifier minimizer
*:
0 or more quantifiers
+:
1 or more quantifier, also "possessive quantifier"
{:
Start min/max quantifier
Part of a pattern within square brackets is called a "character class". The following are the only
metacharacters in a character class:
\:
General escape character
^:
Negate the class, but only if the first character
-:
Indicates character range
[:
Posix character class (only if followed by Posix syntax)
]:
Terminates the character class
The following sections describe the use of each metacharacter.
BACKSLASH
The backslash character has many uses. First, if it is followed by a character that is not a number or a
letter, it takes away any special meaning that a character can have. This use of backslash as an escape
character applies both inside and outside character classes.
For example, if you want to match a * character, you write \* in the pattern. This escaping action
applies if the following character would otherwise be interpreted as a metacharacter, so it is always
safe to precede a non-alphanumeric with backslash to specify that it stands for itself. In particular, if
you want to match a backslash, write \\.
In unicode mode, only ASCII numbers and letters have any special meaning after a backslash. All other
characters (in particular, those whose code points are > 127) are treated as literals.
If a pattern is compiled with option extended, whitespace in the pattern (other than in a character
class) and characters between a # outside a character class and the next newline are ignored. An escaping
backslash can be used to include a whitespace or # character as part of the pattern.
To remove the special meaning from a sequence of characters, put them between \Q and \E. This is
different from Perl in that $ and @ are handled as literals in \Q...\E sequences in PCRE, while $ and @
cause variable interpolation in Perl. Notice the following examples:
Pattern PCRE matches Perl matches
\Qabc$xyz\E abc$xyz abc followed by the contents of $xyz
\Qabc\$xyz\E abc\$xyz abc\$xyz
\Qabc\E\$\Qxyz\E abc$xyz abc$xyz
The \Q...\E sequence is recognized both inside and outside character classes. An isolated \E that is not
preceded by \Q is ignored. If \Q is not followed by \E later in the pattern, the literal interpretation
continues to the end of the pattern (that is, \E is assumed at the end). If the isolated \Q is inside a
character class, this causes an error, as the character class is not terminated.
Non-Printing Characters
A second use of backslash provides a way of encoding non-printing characters in patterns in a visible
manner. There is no restriction on the appearance of non-printing characters, apart from the binary zero
that terminates a pattern. When a pattern is prepared by text editing, it is often easier to use one of
the following escape sequences than the binary character it represents:
\a:
Alarm, that is, the BEL character (hex 07)
\cx:
"Control-x", where x is any ASCII character
\e:
Escape (hex 1B)
\f:
Form feed (hex 0C)
\n:
Line feed (hex 0A)
\r:
Carriage return (hex 0D)
\t:
Tab (hex 09)
\0dd:
Character with octal code 0dd
\ddd:
Character with octal code ddd, or back reference
\o{ddd..}:
character with octal code ddd..
\xhh:
Character with hex code hh
\x{hhh..}:
Character with hex code hhh..
Note:
Note that \0dd is always an octal code, and that \8 and \9 are the literal characters "8" and "9".
The precise effect of \cx on ASCII characters is as follows: if x is a lowercase letter, it is converted
to upper case. Then bit 6 of the character (hex 40) is inverted. Thus \cA to \cZ become hex 01 to hex 1A
(A is 41, Z is 5A), but \c{ becomes hex 3B ({ is 7B), and \c; becomes hex 7B (; is 3B). If the data item
(byte or 16-bit value) following \c has a value > 127, a compile-time error occurs. This locks out non-
ASCII characters in all modes.
The \c facility was designed for use with ASCII characters, but with the extension to Unicode it is even
less useful than it once was.
After \0 up to two further octal digits are read. If there are fewer than two digits, just those that are
present are used. Thus the sequence \0\x\015 specifies two binary zeros followed by a CR character (code
value 13). Make sure you supply two digits after the initial zero if the pattern character that follows
is itself an octal digit.
The escape \o must be followed by a sequence of octal digits, enclosed in braces. An error occurs if this
is not the case. This escape is a recent addition to Perl; it provides way of specifying character code
points as octal numbers greater than 0777, and it also allows octal numbers and back references to be
unambiguously specified.
For greater clarity and unambiguity, it is best to avoid following \ by a digit greater than zero.
Instead, use \o{} or \x{} to specify character numbers, and \g{} to specify back references. The
following paragraphs describe the old, ambiguous syntax.
The handling of a backslash followed by a digit other than 0 is complicated, and Perl has changed in
recent releases, causing PCRE also to change. Outside a character class, PCRE reads the digit and any
following digits as a decimal number. If the number is < 8, or if there have been at least that many
previous capturing left parentheses in the expression, the entire sequence is taken as a back reference.
A description of how this works is provided later, following the discussion of parenthesized subpatterns.
Inside a character class, or if the decimal number following \ is > 7 and there have not been that many
capturing subpatterns, PCRE handles \8 and \9 as the literal characters "8" and "9", and otherwise re-
reads up to three octal digits following the backslash, and using them to generate a data character. Any
subsequent digits stand for themselves. For example:
\040:
Another way of writing an ASCII space
\40:
The same, provided there are < 40 previous capturing subpatterns
\7:
Always a back reference
\11:
Can be a back reference, or another way of writing a tab
\011:
Always a tab
\0113:
A tab followed by character "3"
\113:
Can be a back reference, otherwise the character with octal code 113
\377:
Can be a back reference, otherwise value 255 (decimal)
\81:
Either a back reference, or the two characters "8" and "1"
Notice that octal values >= 100 that are specified using this syntax must not be introduced by a leading
zero, as no more than three octal digits are ever read.
By default, after \x that is not followed by {, from zero to two hexadecimal digits are read (letters can
be in upper or lower case). Any number of hexadecimal digits may appear between \x{ and }. If a character
other than a hexadecimal digit appears between \x{ and }, or if there is no terminating }, an error
occurs.
Characters whose value is less than 256 can be defined by either of the two syntaxes for \x. There is no
difference in the way they are handled. For example, \xdc is exactly the same as \x{dc}.
Constraints on character values
Characters that are specified using octal or hexadecimal numbers are limited to certain values, as
follows:
8-bit non-UTF mode:
< 0x100
8-bit UTF-8 mode:
< 0x10ffff and a valid codepoint
Invalid Unicode codepoints are the range 0xd800 to 0xdfff (the so-called "surrogate" codepoints), and
0xffef.
Escape sequences in character classes
All the sequences that define a single character value can be used both inside and outside character
classes. Also, inside a character class, \b is interpreted as the backspace character (hex 08).
\N is not allowed in a character class. \B, \R, and \X are not special inside a character class. Like
other unrecognized escape sequences, they are treated as the literal characters "B", "R", and "X".
Outside a character class, these sequences have different meanings.
Unsupported Escape Sequences
In Perl, the sequences \l, \L, \u, and \U are recognized by its string handler and used to modify the
case of following characters. PCRE does not support these escape sequences.
Absolute and Relative Back References
The sequence \g followed by an unsigned or a negative number, optionally enclosed in braces, is an
absolute or relative back reference. A named back reference can be coded as \g{name}. Back references are
discussed later, following the discussion of parenthesized subpatterns.
Absolute and Relative Subroutine Calls
For compatibility with Oniguruma, the non-Perl syntax \g followed by a name or a number enclosed either
in angle brackets or single quotes, is alternative syntax for referencing a subpattern as a "subroutine".
Details are discussed later. Notice that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax) are not
synonymous. The former is a back reference and the latter is a subroutine call.
Generic Character Types
Another use of backslash is for specifying generic character types:
\d:
Any decimal digit
\D:
Any character that is not a decimal digit
\h:
Any horizontal whitespace character
\H:
Any character that is not a horizontal whitespace character
\s:
Any whitespace character
\S:
Any character that is not a whitespace character
\v:
Any vertical whitespace character
\V:
Any character that is not a vertical whitespace character
\w:
Any "word" character
\W:
Any "non-word" character
There is also the single sequence \N, which matches a non-newline character. This is the same as the "."
metacharacter when dotall is not set. Perl also uses \N to match characters by name, but PCRE does not
support this.
Each pair of lowercase and uppercase escape sequences partitions the complete set of characters into two
disjoint sets. Any given character matches one, and only one, of each pair. The sequences can appear both
inside and outside character classes. They each match one character of the appropriate type. If the
current matching point is at the end of the subject string, all fail, as there is no character to match.
For compatibility with Perl, \s did not used to match the VT character (code 11), which made it different
from the the POSIX "space" class. However, Perl added VT at release 5.18, and PCRE followed suit at
release 8.34. The default \s characters are now HT (9), LF (10), VT (11), FF (12), CR (13), and space
(32), which are defined as white space in the "C" locale. This list may vary if locale-specific matching
is taking place. For example, in some locales the "non-breaking space" character (\xA0) is recognized as
white space, and in others the VT character is not.
A "word" character is an underscore or any character that is a letter or a digit. By default, the
definition of letters and digits is controlled by the PCRE low-valued character tables, in Erlang's case
(and without option unicode), the ISO Latin-1 character set.
By default, in unicode mode, characters with values > 255, that is, all characters outside the ISO
Latin-1 character set, never match \d, \s, or \w, and always match \D, \S, and \W. These sequences retain
their original meanings from before UTF support was available, mainly for efficiency reasons. However, if
option ucp is set, the behavior is changed so that Unicode properties are used to determine character
types, as follows:
\d:
Any character that \p{Nd} matches (decimal digit)
\s:
Any character that \p{Z} or \h or \v
\w:
Any character that matches \p{L} or \p{N} matches, plus underscore
The uppercase escapes match the inverse sets of characters. Notice that \d matches only decimal digits,
while \w matches any Unicode digit, any Unicode letter, and underscore. Notice also that ucp affects \b
and \B, as they are defined in terms of \w and \W. Matching these sequences is noticeably slower when ucp
is set.
The sequences \h, \H, \v, and \V are features that were added to Perl in release 5.10. In contrast to the
other sequences, which match only ASCII characters by default, these always match certain high-valued
code points, regardless if ucp is set.
The following are the horizontal space characters:
U+0009:
Horizontal tab (HT)
U+0020:
Space
U+00A0:
Non-break space
U+1680:
Ogham space mark
U+180E:
Mongolian vowel separator
U+2000:
En quad
U+2001:
Em quad
U+2002:
En space
U+2003:
Em space
U+2004:
Three-per-em space
U+2005:
Four-per-em space
U+2006:
Six-per-em space
U+2007:
Figure space
U+2008:
Punctuation space
U+2009:
Thin space
U+200A:
Hair space
U+202F:
Narrow no-break space
U+205F:
Medium mathematical space
U+3000:
Ideographic space
The following are the vertical space characters:
U+000A:
Line feed (LF)
U+000B:
Vertical tab (VT)
U+000C:
Form feed (FF)
U+000D:
Carriage return (CR)
U+0085:
Next line (NEL)
U+2028:
Line separator
U+2029:
Paragraph separator
In 8-bit, non-UTF-8 mode, only the characters with code points < 256 are relevant.
Newline Sequences
Outside a character class, by default, the escape sequence \R matches any Unicode newline sequence. In
non-UTF-8 mode, \R is equivalent to the following:
(?>\r\n|\n|\x0b|\f|\r|\x85)
This is an example of an "atomic group", details are provided below.
This particular group matches either the two-character sequence CR followed by LF, or one of the single
characters LF (line feed, U+000A), VT (vertical tab, U+000B), FF (form feed, U+000C), CR (carriage
return, U+000D), or NEL (next line, U+0085). The two-character sequence is treated as a single unit that
cannot be split.
In Unicode mode, two more characters whose code points are > 255 are added: LS (line separator, U+2028)
and PS (paragraph separator, U+2029). Unicode character property support is not needed for these
characters to be recognized.
\R can be restricted to match only CR, LF, or CRLF (instead of the complete set of Unicode line endings)
by setting option bsr_anycrlf either at compile time or when the pattern is matched. (BSR is an acronym
for "backslash R".) This can be made the default when PCRE is built; if so, the other behavior can be
requested through option bsr_unicode. These settings can also be specified by starting a pattern string
with one of the following sequences:
(*BSR_ANYCRLF):
CR, LF, or CRLF only
(*BSR_UNICODE):
Any Unicode newline sequence
These override the default and the options specified to the compiling function, but they can themselves
be overridden by options specified to a matching function. Notice that these special settings, which are
not Perl-compatible, are recognized only at the very start of a pattern, and that they must be in upper
case. If more than one of them is present, the last one is used. They can be combined with a change of
newline convention; for example, a pattern can start with:
(*ANY)(*BSR_ANYCRLF)
They can also be combined with the (*UTF8), (*UTF), or (*UCP) special sequences. Inside a character
class, \R is treated as an unrecognized escape sequence, and so matches the letter "R" by default.
Unicode Character Properties
Three more escape sequences that match characters with specific properties are available. When in 8-bit
non-UTF-8 mode, these sequences are limited to testing characters whose code points are < 256, but they
do work in this mode. The following are the extra escape sequences:
\p{xx}:
A character with property xx
\P{xx}:
A character without property xx
\X:
A Unicode extended grapheme cluster
The property names represented by xx above are limited to the Unicode script names, the general category
properties, "Any", which matches any character (including newline), and some special PCRE properties
(described in the next section). Other Perl properties, such as "InMusicalSymbols", are currently not
supported by PCRE. Notice that \P{Any} does not match any characters and always causes a match failure.
Sets of Unicode characters are defined as belonging to certain scripts. A character from one of these
sets can be matched using a script name, for example:
\p{Greek} \P{Han}
Those that are not part of an identified script are lumped together as "Common". The following is the
current list of scripts:
* Arabic
* Armenian
* Avestan
* Balinese
* Bamum
* Bassa_Vah
* Batak
* Bengali
* Bopomofo
* Braille
* Buginese
* Buhid
* Canadian_Aboriginal
* Carian
* Caucasian_Albanian
* Chakma
* Cham
* Cherokee
* Common
* Coptic
* Cuneiform
* Cypriot
* Cyrillic
* Deseret
* Devanagari
* Duployan
* Egyptian_Hieroglyphs
* Elbasan
* Ethiopic
* Georgian
* Glagolitic
* Gothic
* Grantha
* Greek
* Gujarati
* Gurmukhi
* Han
* Hangul
* Hanunoo
* Hebrew
* Hiragana
* Imperial_Aramaic
* Inherited
* Inscriptional_Pahlavi
* Inscriptional_Parthian
* Javanese
* Kaithi
* Kannada
* Katakana
* Kayah_Li
* Kharoshthi
* Khmer
* Khojki
* Khudawadi
* Lao
* Latin
* Lepcha
* Limbu
* Linear_A
* Linear_B
* Lisu
* Lycian
* Lydian
* Mahajani
* Malayalam
* Mandaic
* Manichaean
* Meetei_Mayek
* Mende_Kikakui
* Meroitic_Cursive
* Meroitic_Hieroglyphs
* Miao
* Modi
* Mongolian
* Mro
* Myanmar
* Nabataean
* New_Tai_Lue
* Nko
* Ogham
* Ol_Chiki
* Old_Italic
* Old_North_Arabian
* Old_Permic
* Old_Persian
* Oriya
* Old_South_Arabian
* Old_Turkic
* Osmanya
* Pahawh_Hmong
* Palmyrene
* Pau_Cin_Hau
* Phags_Pa
* Phoenician
* Psalter_Pahlavi
* Rejang
* Runic
* Samaritan
* Saurashtra
* Sharada
* Shavian
* Siddham
* Sinhala
* Sora_Sompeng
* Sundanese
* Syloti_Nagri
* Syriac
* Tagalog
* Tagbanwa
* Tai_Le
* Tai_Tham
* Tai_Viet
* Takri
* Tamil
* Telugu
* Thaana
* Thai
* Tibetan
* Tifinagh
* Tirhuta
* Ugaritic
* Vai
* Warang_Citi
* Yi
Each character has exactly one Unicode general category property, specified by a two-letter acronym. For
compatibility with Perl, negation can be specified by including a circumflex between the opening brace
and the property name. For example, \p{^Lu} is the same as \P{Lu}.
If only one letter is specified with \p or \P, it includes all the general category properties that start
with that letter. In this case, in the absence of negation, the curly brackets in the escape sequence are
optional. The following two examples have the same effect:
\p{L}
\pL
The following general category property codes are supported:
C:
Other
Cc:
Control
Cf:
Format
Cn:
Unassigned
Co:
Private use
Cs:
Surrogate
L:
Letter
Ll:
Lowercase letter
Lm:
Modifier letter
Lo:
Other letter
Lt:
Title case letter
Lu:
Uppercase letter
M:
Mark
Mc:
Spacing mark
Me:
Enclosing mark
Mn:
Non-spacing mark
N:
Number
Nd:
Decimal number
Nl:
Letter number
No:
Other number
P:
Punctuation
Pc:
Connector punctuation
Pd:
Dash punctuation
Pe:
Close punctuation
Pf:
Final punctuation
Pi:
Initial punctuation
Po:
Other punctuation
Ps:
Open punctuation
S:
Symbol
Sc:
Currency symbol
Sk:
Modifier symbol
Sm:
Mathematical symbol
So:
Other symbol
Z:
Separator
Zl:
Line separator
Zp:
Paragraph separator
Zs:
Space separator
The special property L& is also supported. It matches a character that has the Lu, Ll, or Lt property,
that is, a letter that is not classified as a modifier or "other".
The Cs (Surrogate) property applies only to characters in the range U+D800 to U+DFFF. Such characters are
invalid in Unicode strings and so cannot be tested by PCRE. Perl does not support the Cs property.
The long synonyms for property names supported by Perl (such as \p{Letter}) are not supported by PCRE. It
is not permitted to prefix any of these properties with "Is".
No character in the Unicode table has the Cn (unassigned) property. This property is instead assumed for
any code point that is not in the Unicode table.
Specifying caseless matching does not affect these escape sequences. For example, \p{Lu} always matches
only uppercase letters. This is different from the behavior of current versions of Perl.
Matching characters by Unicode property is not fast, as PCRE must do a multistage table lookup to find a
character property. That is why the traditional escape sequences such as \d and \w do not use Unicode
properties in PCRE by default. However, you can make them do so by setting option ucp or by starting the
pattern with (*UCP).
Extended Grapheme Clusters
The \X escape matches any number of Unicode characters that form an "extended grapheme cluster", and
treats the sequence as an atomic group (see below). Up to and including release 8.31, PCRE matched an
earlier, simpler definition that was equivalent to (?>\PM\pM*). That is, it matched a character without
the "mark" property, followed by zero or more characters with the "mark" property. Characters with the
"mark" property are typically non-spacing accents that affect the preceding character.
This simple definition was extended in Unicode to include more complicated kinds of composite character
by giving each character a grapheme breaking property, and creating rules that use these properties to
define the boundaries of extended grapheme clusters. In PCRE releases later than 8.31, \X matches one of
these clusters.
\X always matches at least one character. Then it decides whether to add more characters according to the
following rules for ending a cluster:
* End at the end of the subject string.
* Do not end between CR and LF; otherwise end after any control character.
* Do not break Hangul (a Korean script) syllable sequences. Hangul characters are of five types: L, V,
T, LV, and LVT. An L character can be followed by an L, V, LV, or LVT character. An LV or V character
can be followed by a V or T character. An LVT or T character can be followed only by a T character.
* Do not end before extending characters or spacing marks. Characters with the "mark" property always
have the "extend" grapheme breaking property.
* Do not end after prepend characters.
* Otherwise, end the cluster.
PCRE Additional Properties
In addition to the standard Unicode properties described earlier, PCRE supports four more that make it
possible to convert traditional escape sequences, such as \w and \s to use Unicode properties. PCRE uses
these non-standard, non-Perl properties internally when the ucp option is passed. However, they can also
be used explicitly. The properties are as follows:
Xan:
Any alphanumeric character. Matches characters that have either the L (letter) or the N (number)
property.
Xps:
Any Posix space character. Matches the characters tab, line feed, vertical tab, form feed, carriage
return, and any other character that has the Z (separator) property.
Xsp:
Any Perl space character. Matches the same as Xps, except that vertical tab is excluded.
Xwd:
Any Perl "word" character. Matches the same characters as Xan, plus underscore.
Perl and POSIX space are now the same. Perl added VT to its space character set at release 5.18 and PCRE
changed at release 8.34.
Xan matches characters that have either the L (letter) or the N (number) property. Xps matches the
characters tab, linefeed, vertical tab, form feed, or carriage return, and any other character that has
the Z (separator) property. Xsp is the same as Xps; it used to exclude vertical tab, for Perl
compatibility, but Perl changed, and so PCRE followed at release 8.34. Xwd matches the same characters as
Xan, plus underscore.
There is another non-standard property, Xuc, which matches any character that can be represented by a
Universal Character Name in C++ and other programming languages. These are the characters $, @, ` (grave
accent), and all characters with Unicode code points >= U+00A0, except for the surrogates U+D800 to
U+DFFF. Notice that most base (ASCII) characters are excluded. (Universal Character Names are of the form
\uHHHH or \UHHHHHHHH, where H is a hexadecimal digit. Notice that the Xuc property does not match these
sequences but the characters that they represent.)
Resetting the Match Start
The escape sequence \K causes any previously matched characters not to be included in the final matched
sequence. For example, the following pattern matches "foobar", but reports that it has matched "bar":
foo\Kbar
This feature is similar to a lookbehind assertion (described below). However, in this case, the part of
the subject before the real match does not have to be of fixed length, as lookbehind assertions do. The
use of \K does not interfere with the setting of captured substrings. For example, when the following
pattern matches "foobar", the first substring is still set to "foo":
(foo)\Kbar
Perl documents that the use of \K within assertions is "not well defined". In PCRE, \K is acted upon when
it occurs inside positive assertions, but is ignored in negative assertions. Note that when a pattern
such as (?=ab\K) matches, the reported start of the match can be greater than the end of the match.
Simple Assertions
The final use of backslash is for certain simple assertions. An assertion specifies a condition that must
be met at a particular point in a match, without consuming any characters from the subject string. The
use of subpatterns for more complicated assertions is described below. The following are the backslashed
assertions:
\b:
Matches at a word boundary.
\B:
Matches when not at a word boundary.
\A:
Matches at the start of the subject.
\Z:
Matches at the end of the subject, and before a newline at the end of the subject.
\z:
Matches only at the end of the subject.
\G:
Matches at the first matching position in the subject.
Inside a character class, \b has a different meaning; it matches the backspace character. If any other of
these assertions appears in a character class, by default it matches the corresponding literal character
(for example, \B matches the letter B).
A word boundary is a position in the subject string where the current character and the previous
character do not both match \w or \W (that is, one matches \w and the other matches \W), or the start or
end of the string if the first or last character matches \w, respectively. In UTF mode, the meanings of
\w and \W can be changed by setting option ucp. When this is done, it also affects \b and \B. PCRE and
Perl do not have a separate "start of word" or "end of word" metasequence. However, whatever follows \b
normally determines which it is. For example, the fragment \ba matches "a" at the start of a word.
The \A, \Z, and \z assertions differ from the traditional circumflex and dollar (described in the next
section) in that they only ever match at the very start and end of the subject string, whatever options
are set. Thus, they are independent of multiline mode. These three assertions are not affected by options
notbol or noteol, which affect only the behavior of the circumflex and dollar metacharacters. However, if
argument startoffset of run/3 is non-zero, indicating that matching is to start at a point other than the
beginning of the subject, \A can never match. The difference between \Z and \z is that \Z matches before
a newline at the end of the string and at the very end, while \z matches only at the end.
The \G assertion is true only when the current matching position is at the start point of the match, as
specified by argument startoffset of run/3. It differs from \A when the value of startoffset is non-zero.
By calling run/3 multiple times with appropriate arguments, you can mimic the Perl option /g, and it is
in this kind of implementation where \G can be useful.
Notice, however, that the PCRE interpretation of \G, as the start of the current match, is subtly
different from Perl, which defines it as the end of the previous match. In Perl, these can be different
when the previously matched string was empty. As PCRE does only one match at a time, it cannot reproduce
this behavior.
If all the alternatives of a pattern begin with \G, the expression is anchored to the starting match
position, and the "anchored" flag is set in the compiled regular expression.
CIRCUMFLEX AND DOLLAR
The circumflex and dollar metacharacters are zero-width assertions. That is, they test for a particular
condition to be true without consuming any characters from the subject string.
Outside a character class, in the default matching mode, the circumflex character is an assertion that is
true only if the current matching point is at the start of the subject string. If argument startoffset of
run/3 is non-zero, circumflex can never match if option multiline is unset. Inside a character class,
circumflex has an entirely different meaning (see below).
Circumflex needs not to be the first character of the pattern if some alternatives are involved, but it
is to be the first thing in each alternative in which it appears if the pattern is ever to match that
branch. If all possible alternatives start with a circumflex, that is, if the pattern is constrained to
match only at the start of the subject, it is said to be an "anchored" pattern. (There are also other
constructs that can cause a pattern to be anchored.)
The dollar character is an assertion that is true only if the current matching point is at the end of the
subject string, or immediately before a newline at the end of the string (by default). Notice however
that it does not match the newline. Dollar needs not to be the last character of the pattern if some
alternatives are involved, but it is to be the last item in any branch in which it appears. Dollar has no
special meaning in a character class.
The meaning of dollar can be changed so that it matches only at the very end of the string, by setting
option dollar_endonly at compile time. This does not affect the \Z assertion.
The meanings of the circumflex and dollar characters are changed if option multiline is set. When this is
the case, a circumflex matches immediately after internal newlines and at the start of the subject
string. It does not match after a newline that ends the string. A dollar matches before any newlines in
the string, and at the very end, when multiline is set. When newline is specified as the two-character
sequence CRLF, isolated CR and LF characters do not indicate newlines.
For example, the pattern /^abc$/ matches the subject string "def\nabc" (where \n represents a newline) in
multiline mode, but not otherwise. So, patterns that are anchored in single-line mode because all
branches start with ^ are not anchored in multiline mode, and a match for circumflex is possible when
argument startoffset of run/3 is non-zero. Option dollar_endonly is ignored if multiline is set.
Notice that the sequences \A, \Z, and \z can be used to match the start and end of the subject in both
modes. If all branches of a pattern start with \A, it is always anchored, regardless if multiline is set.
FULL STOP (PERIOD, DOT) AND .
Outside a character class, a dot in the pattern matches any character in the subject string except (by
default) a character that signifies the end of a line.
When a line ending is defined as a single character, dot never matches that character. When the two-
character sequence CRLF is used, dot does not match CR if it is immediately followed by LF, otherwise it
matches all characters (including isolated CRs and LFs). When any Unicode line endings are recognized,
dot does not match CR, LF, or any of the other line-ending characters.
The behavior of dot regarding newlines can be changed. If option dotall is set, a dot matches any
character, without exception. If the two-character sequence CRLF is present in the subject string, it
takes two dots to match it.
The handling of dot is entirely independent of the handling of circumflex and dollar, the only
relationship is that both involve newlines. Dot has no special meaning in a character class.
The escape sequence \N behaves like a dot, except that it is not affected by option PCRE_DOTALL. That is,
it matches any character except one that signifies the end of a line. Perl also uses \N to match
characters by name but PCRE does not support this.
MATCHING A SINGLE DATA UNIT
Outside a character class, the escape sequence \C matches any data unit, regardless if a UTF mode is set.
One data unit is one byte. Unlike a dot, \C always matches line-ending characters. The feature is
provided in Perl to match individual bytes in UTF-8 mode, but it is unclear how it can usefully be used.
As \C breaks up characters into individual data units, matching one unit with \C in a UTF mode means that
the remaining string can start with a malformed UTF character. This has undefined results, as PCRE
assumes that it deals with valid UTF strings.
PCRE does not allow \C to appear in lookbehind assertions (described below) in a UTF mode, as this would
make it impossible to calculate the length of the lookbehind.
The \C escape sequence is best avoided. However, one way of using it that avoids the problem of malformed
UTF characters is to use a lookahead to check the length of the next character, as in the following
pattern, which can be used with a UTF-8 string (ignore whitespace and line breaks):
(?| (?=[\x00-\x7f])(\C) |
(?=[\x80-\x{7ff}])(\C)(\C) |
(?=[\x{800}-\x{ffff}])(\C)(\C)(\C) |
(?=[\x{10000}-\x{1fffff}])(\C)(\C)(\C)(\C))
A group that starts with (?| resets the capturing parentheses numbers in each alternative (see section
Duplicate Subpattern Numbers). The assertions at the start of each branch check the next UTF-8 character
for values whose encoding uses 1, 2, 3, or 4 bytes, respectively. The individual bytes of the character
are then captured by the appropriate number of groups.
SQUARE BRACKETS AND CHARACTER CLASSES
An opening square bracket introduces a character class, terminated by a closing square bracket. A closing
square bracket on its own is not special by default. However, if option PCRE_JAVASCRIPT_COMPAT is set, a
lone closing square bracket causes a compile-time error. If a closing square bracket is required as a
member of the class, it is to be the first data character in the class (after an initial circumflex, if
present) or escaped with a backslash.
A character class matches a single character in the subject. In a UTF mode, the character can be more
than one data unit long. A matched character must be in the set of characters defined by the class,
unless the first character in the class definition is a circumflex, in which case the subject character
must not be in the set defined by the class. If a circumflex is required as a member of the class, ensure
that it is not the first character, or escape it with a backslash.
For example, the character class [aeiou] matches any lowercase vowel, while [^aeiou] matches any
character that is not a lowercase vowel. Notice that a circumflex is just a convenient notation for
specifying the characters that are in the class by enumerating those that are not. A class that starts
with a circumflex is not an assertion; it still consumes a character from the subject string, and
therefore it fails if the current pointer is at the end of the string.
In UTF-8 mode, characters with values > 255 (0xffff) can be included in a class as a literal string of
data units, or by using the \x{ escaping mechanism.
When caseless matching is set, any letters in a class represent both their uppercase and lowercase
versions. For example, a caseless [aeiou] matches "A" and "a", and a caseless [^aeiou] does not match
"A", but a caseful version would. In a UTF mode, PCRE always understands the concept of case for
characters whose values are < 256, so caseless matching is always possible. For characters with higher
values, the concept of case is supported only if PCRE is compiled with Unicode property support. If you
want to use caseless matching in a UTF mode for characters >=, ensure that PCRE is compiled with Unicode
property support and with UTF support.
Characters that can indicate line breaks are never treated in any special way when matching character
classes, whatever line-ending sequence is in use, and whatever setting of options PCRE_DOTALL and
PCRE_MULTILINE is used. A class such as [^a] always matches one of these characters.
The minus (hyphen) character can be used to specify a range of characters in a character class. For
example, [d-m] matches any letter between d and m, inclusive. If a minus character is required in a
class, it must be escaped with a backslash or appear in a position where it cannot be interpreted as
indicating a range, typically as the first or last character in the class, or immediately after a range.
For example, [b-d-z] matches letters in the range b to d, a hyphen character, or z.
The literal character "]" cannot be the end character of a range. A pattern such as [W-]46] is
interpreted as a class of two characters ("W" and "-") followed by a literal string "46]", so it would
match "W46]" or "-46]". However, if "]" is escaped with a backslash, it is interpreted as the end of
range, so [W-\]46] is interpreted as a class containing a range followed by two other characters. The
octal or hexadecimal representation of "]" can also be used to end a range.
An error is generated if a POSIX character class (see below) or an escape sequence other than one that
defines a single character appears at a point where a range ending character is expected. For example,
[z-\xff] is valid, but [A-\d] and [A-[:digit:]] are not.
Ranges operate in the collating sequence of character values. They can also be used for characters
specified numerically, for example, [\000-\037]. Ranges can include any characters that are valid for the
current mode.
If a range that includes letters is used when caseless matching is set, it matches the letters in either
case. For example, [W-c] is equivalent to [][\\^_`wxyzabc], matched caselessly. In a non-UTF mode, if
character tables for a French locale are in use, [\xc8-\xcb] matches accented E characters in both cases.
In UTF modes, PCRE supports the concept of case for characters with values > 255 only when it is compiled
with Unicode property support.
The character escape sequences \d, \D, \h, \H, \p, \P, \s, \S, \v, \V, \w, and \W can appear in a
character class, and add the characters that they match to the class. For example, [\dABCDEF] matches any
hexadecimal digit. In UTF modes, option ucp affects the meanings of \d, \s, \w and their uppercase
partners, just as it does when they appear outside a character class, as described in section Generic
Character Types earlier. The escape sequence \b has a different meaning inside a character class; it
matches the backspace character. The sequences \B, \N, \R, and \X are not special inside a character
class. Like any other unrecognized escape sequences, they are treated as the literal characters "B", "N",
"R", and "X".
A circumflex can conveniently be used with the uppercase character types to specify a more restricted set
of characters than the matching lowercase type. For example, class [^\W_] matches any letter or digit,
but not underscore, while [\w] includes underscore. A positive character class is to be read as
"something OR something OR ..." and a negative class as "NOT something AND NOT something AND NOT ...".
Only the following metacharacters are recognized in character classes:
* Backslash
* Hyphen (only where it can be interpreted as specifying a range)
* Circumflex (only at the start)
* Opening square bracket (only when it can be interpreted as introducing a Posix class name, or for a
special compatibility feature; see the next two sections)
* Terminating closing square bracket
However, escaping other non-alphanumeric characters does no harm.
POSIX CHARACTER CLASSES
Perl supports the Posix notation for character classes. This uses names enclosed by [: and :] within the
enclosing square brackets. PCRE also supports this notation. For example, the following matches "0", "1",
any alphabetic character, or "%":
[01[:alpha:]%]
The following are the supported class names:
alnum:
Letters and digits
alpha:
Letters
blank:
Space or tab only
cntrl:
Control characters
digit:
Decimal digits (same as \d)
graph:
Printing characters, excluding space
lower:
Lowercase letters
print:
Printing characters, including space
punct:
Printing characters, excluding letters, digits, and space
space:
Whitespace (the same as \s from PCRE 8.34)
upper:
Uppercase letters
word:
"Word" characters (same as \w)
xdigit:
Hexadecimal digits
There is another character class, ascii, that erroneously matches Latin-1 characters instead of the 0-127
range specified by POSIX. This cannot be fixed without altering the behaviour of other classes, so we
recommend matching the range with [\\0-\x7f] instead.
The default "space" characters are HT (9), LF (10), VT (11), FF (12), CR (13), and space (32). If locale-
specific matching is taking place, the list of space characters may be different; there may be fewer or
more of them. "Space" used to be different to \s, which did not include VT, for Perl compatibility.
However, Perl changed at release 5.18, and PCRE followed at release 8.34. "Space" and \s now match the
same set of characters.
The name "word" is a Perl extension, and "blank" is a GNU extension from Perl 5.8. Another Perl extension
is negation, which is indicated by a ^ character after the colon. For example, the following matches "1",
"2", or any non-digit:
[12[:^digit:]]
PCRE (and Perl) also recognize the Posix syntax [.ch.] and [=ch=] where "ch" is a "collating element",
but these are not supported, and an error is given if they are encountered.
By default, characters with values > 255 do not match any of the Posix character classes. However, if
option PCRE_UCP is passed to pcre_compile(), some of the classes are changed so that Unicode character
properties are used. This is achieved by replacing certain Posix classes by other sequences, as follows:
[:alnum:]:
Becomes \p{Xan}
[:alpha:]:
Becomes \p{L}
[:blank:]:
Becomes \h
[:digit:]:
Becomes \p{Nd}
[:lower:]:
Becomes \p{Ll}
[:space:]:
Becomes \p{Xps}
[:upper:]:
Becomes \p{Lu}
[:word:]:
Becomes \p{Xwd}
Negated versions, such as [:^alpha:], use \P instead of \p. Three other POSIX classes are handled
specially in UCP mode:
[:graph:]:
This matches characters that have glyphs that mark the page when printed. In Unicode property terms,
it matches all characters with the L, M, N, P, S, or Cf properties, except for:
U+061C:
Arabic Letter Mark
U+180E:
Mongolian Vowel Separator
U+2066 - U+2069:
Various "isolate"s
[:print:]:
This matches the same characters as [:graph:] plus space characters that are not controls, that is,
characters with the Zs property.
[:punct:]:
This matches all characters that have the Unicode P (punctuation) property, plus those characters
whose code points are less than 128 that have the S (Symbol) property.
The other POSIX classes are unchanged, and match only characters with code points less than 128.
Compatibility Feature for Word Boundaries
In the POSIX.2 compliant library that was included in 4.4BSD Unix, the ugly syntax [[:<:]] and [[:>:]] is
used for matching "start of word" and "end of word". PCRE treats these items as follows:
[[:<:]]:
is converted to \b(?=\w)
[[:>:]]:
is converted to \b(?<=\w)
Only these exact character sequences are recognized. A sequence such as [a[:<:]b] provokes error for an
unrecognized POSIX class name. This support is not compatible with Perl. It is provided to help
migrations from other environments, and is best not used in any new patterns. Note that \b matches at the
start and the end of a word (see "Simple assertions" above), and in a Perl-style pattern the preceding or
following character normally shows which is wanted, without the need for the assertions that are used
above in order to give exactly the POSIX behaviour.
VERTICAL BAR
Vertical bar characters are used to separate alternative patterns. For example, the following pattern
matches either "gilbert" or "sullivan":
gilbert|sullivan
Any number of alternatives can appear, and an empty alternative is permitted (matching the empty string).
The matching process tries each alternative in turn, from left to right, and the first that succeeds is
used. If the alternatives are within a subpattern (defined in section Subpatterns), "succeeds" means
matching the remaining main pattern and the alternative in the subpattern.
INTERNAL OPTION SETTING
The settings of the Perl-compatible options caseless, multiline, dotall, and extended can be changed from
within the pattern by a sequence of Perl option letters enclosed between "(?" and ")". The option letters
are as follows:
i:
For caseless
m:
For multiline
s:
For dotall
x:
For extended
For example, (?im) sets caseless, multiline matching. These options can also be unset by preceding the
letter with a hyphen. A combined setting and unsetting such as (?im-sx), which sets caseless and
multiline, while unsetting dotall and extended, is also permitted. If a letter appears both before and
after the hyphen, the option is unset.
The PCRE-specific options dupnames, ungreedy, and extra can be changed in the same way as the Perl-
compatible options by using the characters J, U, and X respectively.
When one of these option changes occurs at top-level (that is, not inside subpattern parentheses), the
change applies to the remainder of the pattern that follows.
An option change within a subpattern (see section Subpatterns) affects only that part of the subpattern
that follows it. So, the following matches abc and aBc and no other strings (assuming caseless is not
used):
(a(?i)b)c
By this means, options can be made to have different settings in different parts of the pattern. Any
changes made in one alternative do carry on into subsequent branches within the same subpattern. For
example:
(a(?i)b|c)
matches "ab", "aB", "c", and "C", although when matching "C" the first branch is abandoned before the
option setting. This is because the effects of option settings occur at compile time. There would be some
weird behavior otherwise.
Note:
Other PCRE-specific options can be set by the application when the compiling or matching functions are
called. Sometimes the pattern can contain special leading sequences, such as (*CRLF), to override what
the application has set or what has been defaulted. Details are provided in section Newline Sequences
earlier.
The (*UTF8) and (*UCP) leading sequences can be used to set UTF and Unicode property modes. They are
equivalent to setting options unicode and ucp, respectively. The (*UTF) sequence is a generic version
that can be used with any of the libraries. However, the application can set option never_utf, which
locks out the use of the (*UTF) sequences.
SUBPATTERNS
Subpatterns are delimited by parentheses (round brackets), which can be nested. Turning part of a pattern
into a subpattern does two things:
1.:
It localizes a set of alternatives. For example, the following pattern matches "cataract",
"caterpillar", or "cat":
cat(aract|erpillar|)
Without the parentheses, it would match "cataract", "erpillar", or an empty string.
2.:
It sets up the subpattern as a capturing subpattern. That is, when the complete pattern matches, that
portion of the subject string that matched the subpattern is passed back to the caller through the
return value of run/3.
Opening parentheses are counted from left to right (starting from 1) to obtain numbers for the capturing
subpatterns. For example, if the string "the red king" is matched against the following pattern, the
captured substrings are "red king", "red", and "king", and are numbered 1, 2, and 3, respectively:
the ((red|white) (king|queen))
It is not always helpful that plain parentheses fulfill two functions. Often a grouping subpattern is
required without a capturing requirement. If an opening parenthesis is followed by a question mark and a
colon, the subpattern does not do any capturing, and is not counted when computing the number of any
subsequent capturing subpatterns. For example, if the string "the white queen" is matched against the
following pattern, the captured substrings are "white queen" and "queen", and are numbered 1 and 2:
the ((?:red|white) (king|queen))
The maximum number of capturing subpatterns is 65535.
As a convenient shorthand, if any option settings are required at the start of a non-capturing
subpattern, the option letters can appear between "?" and ":". Thus, the following two patterns match the
same set of strings:
(?i:saturday|sunday)
(?:(?i)saturday|sunday)
As alternative branches are tried from left to right, and options are not reset until the end of the
subpattern is reached, an option setting in one branch does affect subsequent branches, so the above
patterns match both "SUNDAY" and "Saturday".
DUPLICATE SUBPATTERN NUMBERS
Perl 5.10 introduced a feature where each alternative in a subpattern uses the same numbers for its
capturing parentheses. Such a subpattern starts with (?| and is itself a non-capturing subpattern. For
example, consider the following pattern:
(?|(Sat)ur|(Sun))day
As the two alternatives are inside a (?| group, both sets of capturing parentheses are numbered one.
Thus, when the pattern matches, you can look at captured substring number one, whichever alternative
matched. This construct is useful when you want to capture a part, but not all, of one of many
alternatives. Inside a (?| group, parentheses are numbered as usual, but the number is reset at the start
of each branch. The numbers of any capturing parentheses that follow the subpattern start after the
highest number used in any branch. The following example is from the Perl documentation; the numbers
underneath show in which buffer the captured content is stored:
# before ---------------branch-reset----------- after
/ ( a ) (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x
# 1 2 2 3 2 3 4
A back reference to a numbered subpattern uses the most recent value that is set for that number by any
subpattern. The following pattern matches "abcabc" or "defdef":
/(?|(abc)|(def))\1/
In contrast, a subroutine call to a numbered subpattern always refers to the first one in the pattern
with the given number. The following pattern matches "abcabc" or "defabc":
/(?|(abc)|(def))(?1)/
If a condition test for a subpattern having matched refers to a non-unique number, the test is true if
any of the subpatterns of that number have matched.
An alternative approach using this "branch reset" feature is to use duplicate named subpatterns, as
described in the next section.
NAMED SUBPATTERNS
Identifying capturing parentheses by number is simple, but it can be hard to keep track of the numbers in
complicated regular expressions. Also, if an expression is modified, the numbers can change. To help with
this difficulty, PCRE supports the naming of subpatterns. This feature was not added to Perl until
release 5.10. Python had the feature earlier, and PCRE introduced it at release 4.0, using the Python
syntax. PCRE now supports both the Perl and the Python syntax. Perl allows identically numbered
subpatterns to have different names, but PCRE does not.
In PCRE, a subpattern can be named in one of three ways: (?<name>...) or (?'name'...) as in Perl, or
(?P<name>...) as in Python. References to capturing parentheses from other parts of the pattern, such as
back references, recursion, and conditions, can be made by name and by number.
Names consist of up to 32 alphanumeric characters and underscores, but must start with a non-digit. Named
capturing parentheses are still allocated numbers as well as names, exactly as if the names were not
present. The capture specification to run/3 can use named values if they are present in the regular
expression.
By default, a name must be unique within a pattern, but this constraint can be relaxed by setting option
dupnames at compile time. (Duplicate names are also always permitted for subpatterns with the same
number, set up as described in the previous section.) Duplicate names can be useful for patterns where
only one instance of the named parentheses can match. Suppose that you want to match the name of a
weekday, either as a 3-letter abbreviation or as the full name, and in both cases you want to extract the
abbreviation. The following pattern (ignoring the line breaks) does the job:
(?<DN>Mon|Fri|Sun)(?:day)?|
(?<DN>Tue)(?:sday)?|
(?<DN>Wed)(?:nesday)?|
(?<DN>Thu)(?:rsday)?|
(?<DN>Sat)(?:urday)?
There are five capturing substrings, but only one is ever set after a match. (An alternative way of
solving this problem is to use a "branch reset" subpattern, as described in the previous section.)
For capturing named subpatterns which names are not unique, the first matching occurrence (counted from
left to right in the subject) is returned from run/3, if the name is specified in the values part of the
capture statement. The all_names capturing value matches all the names in the same way.
Note:
You cannot use different names to distinguish between two subpatterns with the same number, as PCRE uses
only the numbers when matching. For this reason, an error is given at compile time if different names are
specified to subpatterns with the same number. However, you can specify the same name to subpatterns with
the same number, even when dupnames is not set.
REPETITION
Repetition is specified by quantifiers, which can follow any of the following items:
* A literal data character
* The dot metacharacter
* The \C escape sequence
* The \X escape sequence
* The \R escape sequence
* An escape such as \d or \pL that matches a single character
* A character class
* A back reference (see the next section)
* A parenthesized subpattern (including assertions)
* A subroutine call to a subpattern (recursive or otherwise)
The general repetition quantifier specifies a minimum and maximum number of permitted matches, by giving
the two numbers in curly brackets (braces), separated by a comma. The numbers must be < 65536, and the
first must be less than or equal to the second. For example, the following matches "zz", "zzz", or
"zzzz":
z{2,4}
A closing brace on its own is not a special character. If the second number is omitted, but the comma is
present, there is no upper limit. If the second number and the comma are both omitted, the quantifier
specifies an exact number of required matches. Thus, the following matches at least three successive
vowels, but can match many more:
[aeiou]{3,}
The following matches exactly eight digits:
\d{8}
An opening curly bracket that appears in a position where a quantifier is not allowed, or one that does
not match the syntax of a quantifier, is taken as a literal character. For example, {,6} is not a
quantifier, but a literal string of four characters.
In Unicode mode, quantifiers apply to characters rather than to individual data units. Thus, for example,
\x{100}{2} matches two characters, each of which is represented by a 2-byte sequence in a UTF-8 string.
Similarly, \X{3} matches three Unicode extended grapheme clusters, each of which can be many data units
long (and they can be of different lengths).
The quantifier {0} is permitted, causing the expression to behave as if the previous item and the
quantifier were not present. This can be useful for subpatterns that are referenced as subroutines from
elsewhere in the pattern (but see also section Defining Subpatterns for Use by Reference Only). Items
other than subpatterns that have a {0} quantifier are omitted from the compiled pattern.
For convenience, the three most common quantifiers have single-character abbreviations:
*:
Equivalent to {0,}
+:
Equivalent to {1,}
?:
Equivalent to {0,1}
Infinite loops can be constructed by following a subpattern that can match no characters with a
quantifier that has no upper limit, for example:
(a?)*
Earlier versions of Perl and PCRE used to give an error at compile time for such patterns. However, as
there are cases where this can be useful, such patterns are now accepted. However, if any repetition of
the subpattern matches no characters, the loop is forcibly broken.
By default, the quantifiers are "greedy", that is, they match as much as possible (up to the maximum
number of permitted times), without causing the remaining pattern to fail. The classic example of where
this gives problems is in trying to match comments in C programs. These appear between /* and */. Within
the comment, individual * and / characters can appear. An attempt to match C comments by applying the
pattern
/\*.*\*/
to the string
/* first comment */ not comment /* second comment */
fails, as it matches the entire string owing to the greediness of the .* item.
However, if a quantifier is followed by a question mark, it ceases to be greedy, and instead matches the
minimum number of times possible, so the following pattern does the right thing with the C comments:
/\*.*?\*/
The meaning of the various quantifiers is not otherwise changed, only the preferred number of matches. Do
not confuse this use of question mark with its use as a quantifier in its own right. As it has two uses,
it can sometimes appear doubled, as in
\d??\d
which matches one digit by preference, but can match two if that is the only way the remaining pattern
matches.
If option ungreedy is set (an option that is not available in Perl), the quantifiers are not greedy by
default, but individual ones can be made greedy by following them with a question mark. That is, it
inverts the default behavior.
When a parenthesized subpattern is quantified with a minimum repeat count that is > 1 or with a limited
maximum, more memory is required for the compiled pattern, in proportion to the size of the minimum or
maximum.
If a pattern starts with .* or .{0,} and option dotall (equivalent to Perl option /s) is set, thus
allowing the dot to match newlines, the pattern is implicitly anchored, because whatever follows is tried
against every character position in the subject string. So, there is no point in retrying the overall
match at any position after the first. PCRE normally treats such a pattern as if it was preceded by \A.
In cases where it is known that the subject string contains no newlines, it is worth setting dotall to
obtain this optimization, or alternatively using ^ to indicate anchoring explicitly.
However, there are some cases where the optimization cannot be used. When .* is inside capturing
parentheses that are the subject of a back reference elsewhere in the pattern, a match at the start can
fail where a later one succeeds. Consider, for example:
(.*)abc\1
If the subject is "xyz123abc123", the match point is the fourth character. Therefore, such a pattern is
not implicitly anchored.
Another case where implicit anchoring is not applied is when the leading .* is inside an atomic group.
Once again, a match at the start can fail where a later one succeeds. Consider the following pattern:
(?>.*?a)b
It matches "ab" in the subject "aab". The use of the backtracking control verbs (*PRUNE) and (*SKIP) also
disable this optimization.
When a capturing subpattern is repeated, the value captured is the substring that matched the final
iteration. For example, after
(tweedle[dume]{3}\s*)+
has matched "tweedledum tweedledee", the value of the captured substring is "tweedledee". However, if
there are nested capturing subpatterns, the corresponding captured values can have been set in previous
iterations. For example, after
/(a|(b))+/
matches "aba", the value of the second captured substring is "b".
ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS
With both maximizing ("greedy") and minimizing ("ungreedy" or "lazy") repetition, failure of what follows
normally causes the repeated item to be re-evaluated to see if a different number of repeats allows the
remaining pattern to match. Sometimes it is useful to prevent this, either to change the nature of the
match, or to cause it to fail earlier than it otherwise might, when the author of the pattern knows that
there is no point in carrying on.
Consider, for example, the pattern \d+foo when applied to the following subject line:
123456bar
After matching all six digits and then failing to match "foo", the normal action of the matcher is to try
again with only five digits matching item \d+, and then with four, and so on, before ultimately failing.
"Atomic grouping" (a term taken from Jeffrey Friedl's book) provides the means for specifying that once a
subpattern has matched, it is not to be re-evaluated in this way.
If atomic grouping is used for the previous example, the matcher gives up immediately on failing to match
"foo" the first time. The notation is a kind of special parenthesis, starting with (?> as in the
following example:
(?>\d+)foo
This kind of parenthesis "locks up" the part of the pattern it contains once it has matched, and a
failure further into the pattern is prevented from backtracking into it. Backtracking past it to previous
items, however, works as normal.
An alternative description is that a subpattern of this type matches the string of characters that an
identical standalone pattern would match, if anchored at the current point in the subject string.
Atomic grouping subpatterns are not capturing subpatterns. Simple cases such as the above example can be
thought of as a maximizing repeat that must swallow everything it can. So, while both \d+ and \d+? are
prepared to adjust the number of digits they match to make the remaining pattern match, (?>\d+) can only
match an entire sequence of digits.
Atomic groups in general can contain any complicated subpatterns, and can be nested. However, when the
subpattern for an atomic group is just a single repeated item, as in the example above, a simpler
notation, called a "possessive quantifier" can be used. This consists of an extra + character following a
quantifier. Using this notation, the previous example can be rewritten as
\d++foo
Notice that a possessive quantifier can be used with an entire group, for example:
(abc|xyz){2,3}+
Possessive quantifiers are always greedy; the setting of option ungreedy is ignored. They are a
convenient notation for the simpler forms of an atomic group. However, there is no difference in the
meaning of a possessive quantifier and the equivalent atomic group, but there can be a performance
difference; possessive quantifiers are probably slightly faster.
The possessive quantifier syntax is an extension to the Perl 5.8 syntax. Jeffrey Friedl originated the
idea (and the name) in the first edition of his book. Mike McCloskey liked it, so implemented it when he
built the Sun Java package, and PCRE copied it from there. It ultimately found its way into Perl at
release 5.10.
PCRE has an optimization that automatically "possessifies" certain simple pattern constructs. For
example, the sequence A+B is treated as A++B, as there is no point in backtracking into a sequence of A:s
when B must follow.
When a pattern contains an unlimited repeat inside a subpattern that can itself be repeated an unlimited
number of times, the use of an atomic group is the only way to avoid some failing matches taking a long
time. The pattern
(\D+|<\d+>)*[!?]
matches an unlimited number of substrings that either consist of non-digits, or digits enclosed in <>,
followed by ! or ?. When it matches, it runs quickly. However, if it is applied to
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
it takes a long time before reporting failure. This is because the string can be divided between the
internal \D+ repeat and the external * repeat in many ways, and all must be tried. (The example uses [!?]
rather than a single character at the end, as both PCRE and Perl have an optimization that allows for
fast failure when a single character is used. They remember the last single character that is required
for a match, and fail early if it is not present in the string.) If the pattern is changed so that it
uses an atomic group, like the following, sequences of non-digits cannot be broken, and failure happens
quickly:
((?>\D+)|<\d+>)*[!?]
BACK REFERENCES
Outside a character class, a backslash followed by a digit > 0 (and possibly further digits) is a back
reference to a capturing subpattern earlier (that is, to its left) in the pattern, provided there have
been that many previous capturing left parentheses.
However, if the decimal number following the backslash is < 10, it is always taken as a back reference,
and causes an error only if there are not that many capturing left parentheses in the entire pattern.
That is, the parentheses that are referenced do need not be to the left of the reference for numbers <
10. A "forward back reference" of this type can make sense when a repetition is involved and the
subpattern to the right has participated in an earlier iteration.
It is not possible to have a numerical "forward back reference" to a subpattern whose number is 10 or
more using this syntax, as a sequence such as \50 is interpreted as a character defined in octal. For
more details of the handling of digits following a backslash, see section Non-Printing Characters
earlier. There is no such problem when named parentheses are used. A back reference to any subpattern is
possible using named parentheses (see below).
Another way to avoid the ambiguity inherent in the use of digits following a backslash is to use the \g
escape sequence. This escape must be followed by an unsigned number or a negative number, optionally
enclosed in braces. The following examples are identical:
(ring), \1
(ring), \g1
(ring), \g{1}
An unsigned number specifies an absolute reference without the ambiguity that is present in the older
syntax. It is also useful when literal digits follow the reference. A negative number is a relative
reference. Consider the following example:
(abc(def)ghi)\g{-1}
The sequence \g{-1} is a reference to the most recently started capturing subpattern before \g, that is,
it is equivalent to \2 in this example. Similarly, \g{-2} would be equivalent to \1. The use of relative
references can be helpful in long patterns, and also in patterns that are created by joining fragments
containing references within themselves.
A back reference matches whatever matched the capturing subpattern in the current subject string, rather
than anything matching the subpattern itself (section Subpattern as Subroutines describes a way of doing
that). So, the following pattern matches "sense and sensibility" and "response and responsibility", but
not "sense and responsibility":
(sens|respons)e and \1ibility
If caseful matching is in force at the time of the back reference, the case of letters is relevant. For
example, the following matches "rah rah" and "RAH RAH", but not "RAH rah", although the original
capturing subpattern is matched caselessly:
((?i)rah)\s+\1
There are many different ways of writing back references to named subpatterns. The .NET syntax \k{name}
and the Perl syntax \k<name> or \k'name' are supported, as is the Python syntax (?P=name). The unified
back reference syntax in Perl 5.10, in which \g can be used for both numeric and named references, is
also supported. The previous example can be rewritten in the following ways:
(?<p1>(?i)rah)\s+\k<p1>
(?'p1'(?i)rah)\s+\k{p1}
(?P<p1>(?i)rah)\s+(?P=p1)
(?<p1>(?i)rah)\s+\g{p1}
A subpattern that is referenced by name can appear in the pattern before or after the reference.
There can be more than one back reference to the same subpattern. If a subpattern has not been used in a
particular match, any back references to it always fails. For example, the following pattern always fails
if it starts to match "a" rather than "bc":
(a|(bc))\2
As there can be many capturing parentheses in a pattern, all digits following the backslash are taken as
part of a potential back reference number. If the pattern continues with a digit character, some
delimiter must be used to terminate the back reference. If option extended is set, this can be
whitespace. Otherwise an empty comment (see section Comments) can be used.
Recursive Back References
A back reference that occurs inside the parentheses to which it refers fails when the subpattern is first
used, so, for example, (a\1) never matches. However, such references can be useful inside repeated
subpatterns. For example, the following pattern matches any number of "a"s and also "aba", "ababbaa", and
so on:
(a|b\1)+
At each iteration of the subpattern, the back reference matches the character string corresponding to the
previous iteration. In order for this to work, the pattern must be such that the first iteration does not
need to match the back reference. This can be done using alternation, as in the example above, or by a
quantifier with a minimum of zero.
Back references of this type cause the group that they reference to be treated as an atomic group. Once
the whole group has been matched, a subsequent matching failure cannot cause backtracking into the middle
of the group.
ASSERTIONS
An assertion is a test on the characters following or preceding the current matching point that does not
consume any characters. The simple assertions coded as \b, \B, \A, \G, \Z, \z, ^, and $ are described in
the previous sections.
More complicated assertions are coded as subpatterns. There are two kinds: those that look ahead of the
current position in the subject string, and those that look behind it. An assertion subpattern is matched
in the normal way, except that it does not cause the current matching position to be changed.
Assertion subpatterns are not capturing subpatterns. If such an assertion contains capturing subpatterns
within it, these are counted for the purposes of numbering the capturing subpatterns in the whole
pattern. However, substring capturing is done only for positive assertions. (Perl sometimes, but not
always, performs capturing in negative assertions.)
Warning:
If a positive assertion containing one or more capturing subpatterns succeeds, but failure to match later
in the pattern causes backtracking over this assertion, the captures within the assertion are reset only
if no higher numbered captures are already set. This is, unfortunately, a fundamental limitation of the
current implementation, and as PCRE1 is now in maintenance-only status, it is unlikely ever to change.
For compatibility with Perl, assertion subpatterns can be repeated. However, it makes no sense to assert
the same thing many times, the side effect of capturing parentheses can occasionally be useful. In
practice, there are only three cases:
* If the quantifier is {0}, the assertion is never obeyed during matching. However, it can contain
internal capturing parenthesized groups that are called from elsewhere through the subroutine
mechanism.
* If quantifier is {0,n}, where n > 0, it is treated as if it was {0,1}. At runtime, the remaining
pattern match is tried with and without the assertion, the order depends on the greediness of the
quantifier.
* If the minimum repetition is > 0, the quantifier is ignored. The assertion is obeyed only once when
encountered during matching.
Lookahead Assertions
Lookahead assertions start with (?= for positive assertions and (?! for negative assertions. For example,
the following matches a word followed by a semicolon, but does not include the semicolon in the match:
\w+(?=;)
The following matches any occurrence of "foo" that is not followed by "bar":
foo(?!bar)
Notice that the apparently similar pattern
(?!foo)bar
does not find an occurrence of "bar" that is preceded by something other than "foo". It finds any
occurrence of "bar" whatsoever, as the assertion (?!foo) is always true when the next three characters
are "bar". A lookbehind assertion is needed to achieve the other effect.
If you want to force a matching failure at some point in a pattern, the most convenient way to do it is
with (?!), as an empty string always matches. So, an assertion that requires there is not to be an empty
string must always fail. The backtracking control verb (*FAIL) or (*F) is a synonym for (?!).
Lookbehind Assertions
Lookbehind assertions start with (?<= for positive assertions and (?<! for negative assertions. For
example, the following finds an occurrence of "bar" that is not preceded by "foo":
(?<!foo)bar
The contents of a lookbehind assertion are restricted such that all the strings it matches must have a
fixed length. However, if there are many top-level alternatives, they do not all have to have the same
fixed length. Thus, the following is permitted:
(?<=bullock|donkey)
The following causes an error at compile time:
(?<!dogs?|cats?)
Branches that match different length strings are permitted only at the top-level of a lookbehind
assertion. This is an extension compared with Perl, which requires all branches to match the same length
of string. An assertion such as the following is not permitted, as its single top-level branch can match
two different lengths:
(?<=ab(c|de))
However, it is acceptable to PCRE if rewritten to use two top-level branches:
(?<=abc|abde)
Sometimes the escape sequence \K (see above) can be used instead of a lookbehind assertion to get round
the fixed-length restriction.
The implementation of lookbehind assertions is, for each alternative, to move the current position back
temporarily by the fixed length and then try to match. If there are insufficient characters before the
current position, the assertion fails.
In a UTF mode, PCRE does not allow the \C escape (which matches a single data unit even in a UTF mode) to
appear in lookbehind assertions, as it makes it impossible to calculate the length of the lookbehind. The
\X and \R escapes, which can match different numbers of data units, are not permitted either.
"Subroutine" calls (see below), such as (?2) or (?&X), are permitted in lookbehinds, as long as the
subpattern matches a fixed-length string. Recursion, however, is not supported.
Possessive quantifiers can be used with lookbehind assertions to specify efficient matching of fixed-
length strings at the end of subject strings. Consider the following simple pattern when applied to a
long string that does not match:
abcd$
As matching proceeds from left to right, PCRE looks for each "a" in the subject and then sees if what
follows matches the remaining pattern. If the pattern is specified as
^.*abcd$
the initial .* matches the entire string at first. However, when this fails (as there is no following
"a"), it backtracks to match all but the last character, then all but the last two characters, and so on.
Once again the search for "a" covers the entire string, from right to left, so we are no better off.
However, if the pattern is written as
^.*+(?<=abcd)
there can be no backtracking for the .*+ item; it can match only the entire string. The subsequent
lookbehind assertion does a single test on the last four characters. If it fails, the match fails
immediately. For long strings, this approach makes a significant difference to the processing time.
Using Multiple Assertions
Many assertions (of any sort) can occur in succession. For example, the following matches "foo" preceded
by three digits that are not "999":
(?<=\d{3})(?<!999)foo
Notice that each of the assertions is applied independently at the same point in the subject string.
First there is a check that the previous three characters are all digits, and then there is a check that
the same three characters are not "999". This pattern does not match "foo" preceded by six characters,
the first of which are digits and the last three of which are not "999". For example, it does not match
"123abcfoo". A pattern to do that is the following:
(?<=\d{3}...)(?<!999)foo
This time the first assertion looks at the preceding six characters, checks that the first three are
digits, and then the second assertion checks that the preceding three characters are not "999".
Assertions can be nested in any combination. For example, the following matches an occurrence of "baz"
that is preceded by "bar", which in turn is not preceded by "foo":
(?<=(?<!foo)bar)baz
The following pattern matches "foo" preceded by three digits and any three characters that are not "999":
(?<=\d{3}(?!999)...)foo
CONDITIONAL SUBPATTERNS
It is possible to cause the matching process to obey a subpattern conditionally or to choose between two
alternative subpatterns, depending on the result of an assertion, or whether a specific capturing
subpattern has already been matched. The following are the two possible forms of conditional subpattern:
(?(condition)yes-pattern)
(?(condition)yes-pattern|no-pattern)
If the condition is satisfied, the yes-pattern is used, otherwise the no-pattern (if present). If more
than two alternatives exist in the subpattern, a compile-time error occurs. Each of the two alternatives
can itself contain nested subpatterns of any form, including conditional subpatterns; the restriction to
two alternatives applies only at the level of the condition. The following pattern fragment is an example
where the alternatives are complex:
(?(1) (A|B|C) | (D | (?(2)E|F) | E) )
There are four kinds of condition: references to subpatterns, references to recursion, a pseudo-condition
called DEFINE, and assertions.
Checking for a Used Subpattern By Number
If the text between the parentheses consists of a sequence of digits, the condition is true if a
capturing subpattern of that number has previously matched. If more than one capturing subpattern with
the same number exists (see section Duplicate Subpattern Numbers earlier), the condition is true if any
of them have matched. An alternative notation is to precede the digits with a plus or minus sign. In this
case, the subpattern number is relative rather than absolute. The most recently opened parentheses can be
referenced by (?(-1), the next most recent by (?(-2), and so on. Inside loops, it can also make sense to
refer to subsequent groups. The next parentheses to be opened can be referenced as (?(+1), and so on.
(The value zero in any of these forms is not used; it provokes a compile-time error.)
Consider the following pattern, which contains non-significant whitespace to make it more readable
(assume option extended) and to divide it into three parts for ease of discussion:
( \( )? [^()]+ (?(1) \) )
The first part matches an optional opening parenthesis, and if that character is present, sets it as the
first captured substring. The second part matches one or more characters that are not parentheses. The
third part is a conditional subpattern that tests whether the first set of parentheses matched or not. If
they did, that is, if subject started with an opening parenthesis, the condition is true, and so the yes-
pattern is executed and a closing parenthesis is required. Otherwise, as no-pattern is not present, the
subpattern matches nothing. That is, this pattern matches a sequence of non-parentheses, optionally
enclosed in parentheses.
If this pattern is embedded in a larger one, a relative reference can be used:
...other stuff... ( \( )? [^()]+ (?(-1) \) ) ...
This makes the fragment independent of the parentheses in the larger pattern.
Checking for a Used Subpattern By Name
Perl uses the syntax (?(<name>)...) or (?('name')...) to test for a used subpattern by name. For
compatibility with earlier versions of PCRE, which had this facility before Perl, the syntax (?(name)...)
is also recognized.
Rewriting the previous example to use a named subpattern gives:
(?<OPEN> \( )? [^()]+ (?(<OPEN>) \) )
If the name used in a condition of this kind is a duplicate, the test is applied to all subpatterns of
the same name, and is true if any one of them has matched.
Checking for Pattern Recursion
If the condition is the string (R), and there is no subpattern with the name R, the condition is true if
a recursive call to the whole pattern or any subpattern has been made. If digits or a name preceded by
ampersand follow the letter R, for example:
(?(R3)...) or (?(R&name)...)
the condition is true if the most recent recursion is into a subpattern whose number or name is given.
This condition does not check the entire recursion stack. If the name used in a condition of this kind is
a duplicate, the test is applied to all subpatterns of the same name, and is true if any one of them is
the most recent recursion.
At "top-level", all these recursion test conditions are false. The syntax for recursive patterns is
described below.
Defining Subpatterns for Use By Reference Only
If the condition is the string (DEFINE), and there is no subpattern with the name DEFINE, the condition
is always false. In this case, there can be only one alternative in the subpattern. It is always skipped
if control reaches this point in the pattern. The idea of DEFINE is that it can be used to define
"subroutines" that can be referenced from elsewhere. (The use of subroutines is described below.) For
example, a pattern to match an IPv4 address, such as "192.168.23.245", can be written like this (ignore
whitespace and line breaks):
(?(DEFINE) (?<byte> 2[0-4]\d | 25[0-5] | 1\d\d | [1-9]?\d) ) \b (?&byte) (\.(?&byte)){3} \b
The first part of the pattern is a DEFINE group inside which is a another group named "byte" is defined.
This matches an individual component of an IPv4 address (a number < 256). When matching takes place, this
part of the pattern is skipped, as DEFINE acts like a false condition. The remaining pattern uses
references to the named group to match the four dot-separated components of an IPv4 address, insisting on
a word boundary at each end.
Assertion Conditions
If the condition is not in any of the above formats, it must be an assertion. This can be a positive or
negative lookahead or lookbehind assertion. Consider the following pattern, containing non-significant
whitespace, and with the two alternatives on the second line:
(?(?=[^a-z]*[a-z])
\d{2}-[a-z]{3}-\d{2} | \d{2}-\d{2}-\d{2} )
The condition is a positive lookahead assertion that matches an optional sequence of non-letters followed
by a letter. That is, it tests for the presence of at least one letter in the subject. If a letter is
found, the subject is matched against the first alternative, otherwise it is matched against the second.
This pattern matches strings in one of the two forms dd-aaa-dd or dd-dd-dd, where aaa are letters and dd
are digits.
COMMENTS
There are two ways to include comments in patterns that are processed by PCRE. In both cases, the start
of the comment must not be in a character class, or in the middle of any other sequence of related
characters such as (?: or a subpattern name or number. The characters that make up a comment play no part
in the pattern matching.
The sequence (?# marks the start of a comment that continues up to the next closing parenthesis. Nested
parentheses are not permitted. If option PCRE_EXTENDED is set, an unescaped # character also introduces a
comment, which in this case continues to immediately after the next newline character or character
sequence in the pattern. Which characters are interpreted as newlines is controlled by the options passed
to a compiling function or by a special sequence at the start of the pattern, as described in section
Newline Conventions earlier.
Notice that the end of this type of comment is a literal newline sequence in the pattern; escape
sequences that happen to represent a newline do not count. For example, consider the following pattern
when extended is set, and the default newline convention is in force:
abc #comment \n still comment
On encountering character #, pcre_compile() skips along, looking for a newline in the pattern. The
sequence \n is still literal at this stage, so it does not terminate the comment. Only a character with
code value 0x0a (the default newline) does so.
RECURSIVE PATTERNS
Consider the problem of matching a string in parentheses, allowing for unlimited nested parentheses.
Without the use of recursion, the best that can be done is to use a pattern that matches up to some fixed
depth of nesting. It is not possible to handle an arbitrary nesting depth.
For some time, Perl has provided a facility that allows regular expressions to recurse (among other
things). It does this by interpolating Perl code in the expression at runtime, and the code can refer to
the expression itself. A Perl pattern using code interpolation to solve the parentheses problem can be
created like this:
$re = qr{\( (?: (?>[^()]+) | (?p{$re}) )* \)}x;
Item (?p{...}) interpolates Perl code at runtime, and in this case refers recursively to the pattern in
which it appears.
Obviously, PCRE cannot support the interpolation of Perl code. Instead, it supports special syntax for
recursion of the entire pattern, and for individual subpattern recursion. After its introduction in PCRE
and Python, this kind of recursion was later introduced into Perl at release 5.10.
A special item that consists of (? followed by a number > 0 and a closing parenthesis is a recursive
subroutine call of the subpattern of the given number, if it occurs inside that subpattern. (If not, it
is a non-recursive subroutine call, which is described in the next section.) The special item (?R) or
(?0) is a recursive call of the entire regular expression.
This PCRE pattern solves the nested parentheses problem (assume that option extended is set so that
whitespace is ignored):
\( ( [^()]++ | (?R) )* \)
First it matches an opening parenthesis. Then it matches any number of substrings, which can either be a
sequence of non-parentheses or a recursive match of the pattern itself (that is, a correctly
parenthesized substring). Finally there is a closing parenthesis. Notice the use of a possessive
quantifier to avoid backtracking into sequences of non-parentheses.
If this was part of a larger pattern, you would not want to recurse the entire pattern, so instead you
can use:
( \( ( [^()]++ | (?1) )* \) )
The pattern is here within parentheses so that the recursion refers to them instead of the whole pattern.
In a larger pattern, keeping track of parenthesis numbers can be tricky. This is made easier by the use
of relative references. Instead of (?1) in the pattern above, you can write (?-2) to refer to the second
most recently opened parentheses preceding the recursion. That is, a negative number counts capturing
parentheses leftwards from the point at which it is encountered.
It is also possible to refer to later opened parentheses, by writing references such as (?+2). However,
these cannot be recursive, as the reference is not inside the parentheses that are referenced. They are
always non-recursive subroutine calls, as described in the next section.
An alternative approach is to use named parentheses instead. The Perl syntax for this is (?&name). The
earlier PCRE syntax (?P>name) is also supported. We can rewrite the above example as follows:
(?<pn> \( ( [^()]++ | (?&pn) )* \) )
If there is more than one subpattern with the same name, the earliest one is used.
This particular example pattern that we have studied contains nested unlimited repeats, and so the use of
a possessive quantifier for matching strings of non-parentheses is important when applying the pattern to
strings that do not match. For example, when this pattern is applied to
(aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
it gives "no match" quickly. However, if a possessive quantifier is not used, the match runs for a long
time, as there are so many different ways the + and * repeats can carve up the subject, and all must be
tested before failure can be reported.
At the end of a match, the values of capturing parentheses are those from the outermost level. If the
pattern above is matched against
(ab(cd)ef)
the value for the inner capturing parentheses (numbered 2) is "ef", which is the last value taken on at
the top-level. If a capturing subpattern is not matched at the top level, its final captured value is
unset, even if it was (temporarily) set at a deeper level during the matching process.
Do not confuse item (?R) with condition (R), which tests for recursion. Consider the following pattern,
which matches text in angle brackets, allowing for arbitrary nesting. Only digits are allowed in nested
brackets (that is, when recursing), while any characters are permitted at the outer level.
< (?: (?(R) \d++ | [^<>]*+) | (?R)) * >
Here (?(R) is the start of a conditional subpattern, with two different alternatives for the recursive
and non-recursive cases. Item (?R) is the actual recursive call.
Differences in Recursion Processing between PCRE and Perl
Recursion processing in PCRE differs from Perl in two important ways. In PCRE (like Python, but unlike
Perl), a recursive subpattern call is always treated as an atomic group. That is, once it has matched
some of the subject string, it is never re-entered, even if it contains untried alternatives and there is
a subsequent matching failure. This can be illustrated by the following pattern, which means to match a
palindromic string containing an odd number of characters (for example, "a", "aba", "abcba", "abcdcba"):
^(.|(.)(?1)\2)$
The idea is that it either matches a single character, or two identical characters surrounding a
subpalindrome. In Perl, this pattern works; in PCRE it does not work if the pattern is longer than three
characters. Consider the subject string "abcba".
At the top level, the first character is matched, but as it is not at the end of the string, the first
alternative fails, the second alternative is taken, and the recursion kicks in. The recursive call to
subpattern 1 successfully matches the next character ("b"). (Notice that the beginning and end of line
tests are not part of the recursion.)
Back at the top level, the next character ("c") is compared with what subpattern 2 matched, which was
"a". This fails. As the recursion is treated as an atomic group, there are now no backtracking points,
and so the entire match fails. (Perl can now re-enter the recursion and try the second alternative.)
However, if the pattern is written with the alternatives in the other order, things are different:
^((.)(?1)\2|.)$
This time, the recursing alternative is tried first, and continues to recurse until it runs out of
characters, at which point the recursion fails. But this time we have another alternative to try at the
higher level. That is the significant difference: in the previous case the remaining alternative is at a
deeper recursion level, which PCRE cannot use.
To change the pattern so that it matches all palindromic strings, not only those with an odd number of
characters, it is tempting to change the pattern to this:
^((.)(?1)\2|.?)$
Again, this works in Perl, but not in PCRE, and for the same reason. When a deeper recursion has matched
a single character, it cannot be entered again to match an empty string. The solution is to separate the
two cases, and write out the odd and even cases as alternatives at the higher level:
^(?:((.)(?1)\2|)|((.)(?3)\4|.))
If you want to match typical palindromic phrases, the pattern must ignore all non-word characters, which
can be done as follows:
^\W*+(?:((.)\W*+(?1)\W*+\2|)|((.)\W*+(?3)\W*+\4|\W*+.\W*+))\W*+$
If run with option caseless, this pattern matches phrases such as "A man, a plan, a canal: Panama!" and
it works well in both PCRE and Perl. Notice the use of the possessive quantifier *+ to avoid backtracking
into sequences of non-word characters. Without this, PCRE takes much longer (10 times or more) to match
typical phrases, and Perl takes so long that you think it has gone into a loop.
Note:
The palindrome-matching patterns above work only if the subject string does not start with a palindrome
that is shorter than the entire string. For example, although "abcba" is correctly matched, if the
subject is "ababa", PCRE finds palindrome "aba" at the start, and then fails at top level, as the end of
the string does not follow. Once again, it cannot jump back into the recursion to try other alternatives,
so the entire match fails.
The second way in which PCRE and Perl differ in their recursion processing is in the handling of captured
values. In Perl, when a subpattern is called recursively or as a subpattern (see the next section), it
has no access to any values that were captured outside the recursion. In PCRE these values can be
referenced. Consider the following pattern:
^(.)(\1|a(?2))
In PCRE, it matches "bab". The first capturing parentheses match "b", then in the second group, when the
back reference \1 fails to match "b", the second alternative matches "a", and then recurses. In the
recursion, \1 does now match "b" and so the whole match succeeds. In Perl, the pattern fails to match
because inside the recursive call \1 cannot access the externally set value.
SUBPATTERNS AS SUBROUTINES
If the syntax for a recursive subpattern call (either by number or by name) is used outside the
parentheses to which it refers, it operates like a subroutine in a programming language. The called
subpattern can be defined before or after the reference. A numbered reference can be absolute or
relative, as in the following examples:
(...(absolute)...)...(?2)...
(...(relative)...)...(?-1)...
(...(?+1)...(relative)...
An earlier example pointed out that the following pattern matches "sense and sensibility" and "response
and responsibility", but not "sense and responsibility":
(sens|respons)e and \1ibility
If instead the following pattern is used, it matches "sense and responsibility" and the other two
strings:
(sens|respons)e and (?1)ibility
Another example is provided in the discussion of DEFINE earlier.
All subroutine calls, recursive or not, are always treated as atomic groups. That is, once a subroutine
has matched some of the subject string, it is never re-entered, even if it contains untried alternatives
and there is a subsequent matching failure. Any capturing parentheses that are set during the subroutine
call revert to their previous values afterwards.
Processing options such as case-independence are fixed when a subpattern is defined, so if it is used as
a subroutine, such options cannot be changed for different calls. For example, the following pattern
matches "abcabc" but not "abcABC", as the change of processing option does not affect the called
subpattern:
(abc)(?i:(?-1))
ONIGURUMA SUBROUTINE SYNTAX
For compatibility with Oniguruma, the non-Perl syntax \g followed by a name or a number enclosed either
in angle brackets or single quotes, is alternative syntax for referencing a subpattern as a subroutine,
possibly recursively. Here follows two of the examples used above, rewritten using this syntax:
(?<pn> \( ( (?>[^()]+) | \g<pn> )* \) )
(sens|respons)e and \g'1'ibility
PCRE supports an extension to Oniguruma: if a number is preceded by a plus or minus sign, it is taken as
a relative reference, for example:
(abc)(?i:\g<-1>)
Notice that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax) are not synonymous. The former is a back
reference; the latter is a subroutine call.
BACKTRACKING CONTROL
Perl 5.10 introduced some "Special Backtracking Control Verbs", which are still described in the Perl
documentation as "experimental and subject to change or removal in a future version of Perl". It goes on
to say: "Their usage in production code should be noted to avoid problems during upgrades." The same
remarks apply to the PCRE features described in this section.
The new verbs make use of what was previously invalid syntax: an opening parenthesis followed by an
asterisk. They are generally of the form (*VERB) or (*VERB:NAME). Some can take either form, possibly
behaving differently depending on whether a name is present. A name is any sequence of characters that
does not include a closing parenthesis. The maximum name length is 255 in the 8-bit library and 65535 in
the 16-bit and 32-bit libraries. If the name is empty, that is, if the closing parenthesis immediately
follows the colon, the effect is as if the colon was not there. Any number of these verbs can occur in a
pattern.
The behavior of these verbs in repeated groups, assertions, and in subpatterns called as subroutines
(whether or not recursively) is described below.
Optimizations That Affect Backtracking Verbs
PCRE contains some optimizations that are used to speed up matching by running some checks at the start
of each match attempt. For example, it can know the minimum length of matching subject, or that a
particular character must be present. When one of these optimizations bypasses the running of a match,
any included backtracking verbs are not processed. processed. You can suppress the start-of-match
optimizations by setting option no_start_optimize when calling compile/2 or run/3, or by starting the
pattern with (*NO_START_OPT).
Experiments with Perl suggest that it too has similar optimizations, sometimes leading to anomalous
results.
Verbs That Act Immediately
The following verbs act as soon as they are encountered. They must not be followed by a name.
(*ACCEPT)
This verb causes the match to end successfully, skipping the remainder of the pattern. However, when it
is inside a subpattern that is called as a subroutine, only that subpattern is ended successfully.
Matching then continues at the outer level. If (*ACCEPT) is triggered in a positive assertion, the
assertion succeeds; in a negative assertion, the assertion fails.
If (*ACCEPT) is inside capturing parentheses, the data so far is captured. For example, the following
matches "AB", "AAD", or "ACD". When it matches "AB", "B" is captured by the outer parentheses.
A((?:A|B(*ACCEPT)|C)D)
The following verb causes a matching failure, forcing backtracking to occur. It is equivalent to (?!) but
easier to read.
(*FAIL) or (*F)
The Perl documentation states that it is probably useful only when combined with (?{}) or (??{}). Those
are Perl features that are not present in PCRE.
A match with the string "aaaa" always fails, but the callout is taken before each backtrack occurs (in
this example, 10 times).
Recording Which Path Was Taken
The main purpose of this verb is to track how a match was arrived at, although it also has a secondary
use in with advancing the match starting point (see (*SKIP) below).
Note:
In Erlang, there is no interface to retrieve a mark with run/2,3, so only the secondary purpose is
relevant to the Erlang programmer.
The rest of this section is therefore deliberately not adapted for reading by the Erlang programmer, but
the examples can help in understanding NAMES as they can be used by (*SKIP).
(*MARK:NAME) or (*:NAME)
A name is always required with this verb. There can be as many instances of (*MARK) as you like in a
pattern, and their names do not have to be unique.
When a match succeeds, the name of the last encountered (*MARK:NAME), (*PRUNE:NAME), or (*THEN:NAME) on
the matching path is passed back to the caller as described in section "Extra data for pcre_exec()" in
the pcreapi documentation. In the following example of pcretest output, the /K modifier requests the
retrieval and outputting of (*MARK) data:
re> /X(*MARK:A)Y|X(*MARK:B)Z/K
data> XY
0: XY
MK: A
XZ
0: XZ
MK: B
The (*MARK) name is tagged with "MK:" in this output, and in this example it indicates which of the two
alternatives matched. This is a more efficient way of obtaining this information than putting each
alternative in its own capturing parentheses.
If a verb with a name is encountered in a positive assertion that is true, the name is recorded and
passed back if it is the last encountered. This does not occur for negative assertions or failing
positive assertions.
After a partial match or a failed match, the last encountered name in the entire match process is
returned, for example:
re> /X(*MARK:A)Y|X(*MARK:B)Z/K
data> XP
No match, mark = B
Notice that in this unanchored example, the mark is retained from the match attempt that started at
letter "X" in the subject. Subsequent match attempts starting at "P" and then with an empty string do not
get as far as the (*MARK) item, nevertheless do not reset it.
Verbs That Act after Backtracking
The following verbs do nothing when they are encountered. Matching continues with what follows, but if
there is no subsequent match, causing a backtrack to the verb, a failure is forced. That is, backtracking
cannot pass to the left of the verb. However, when one of these verbs appears inside an atomic group or
an assertion that is true, its effect is confined to that group, as once the group has been matched,
there is never any backtracking into it. In this situation, backtracking can "jump back" to the left of
the entire atomic group or assertion. (Remember also, as stated above, that this localization also
applies in subroutine calls.)
These verbs differ in exactly what kind of failure occurs when backtracking reaches them. The behavior
described below is what occurs when the verb is not in a subroutine or an assertion. Subsequent sections
cover these special cases.
The following verb, which must not be followed by a name, causes the whole match to fail outright if
there is a later matching failure that causes backtracking to reach it. Even if the pattern is
unanchored, no further attempts to find a match by advancing the starting point take place.
(*COMMIT)
If (*COMMIT) is the only backtracking verb that is encountered, once it has been passed, run/2,3 is
committed to find a match at the current starting point, or not at all, for example:
a+(*COMMIT)b
This matches "xxaab" but not "aacaab". It can be thought of as a kind of dynamic anchor, or "I've
started, so I must finish". The name of the most recently passed (*MARK) in the path is passed back when
(*COMMIT) forces a match failure.
If more than one backtracking verb exists in a pattern, a different one that follows (*COMMIT) can be
triggered first, so merely passing (*COMMIT) during a match does not always guarantee that a match must
be at this starting point.
Notice that (*COMMIT) at the start of a pattern is not the same as an anchor, unless the PCRE start-of-
match optimizations are turned off, as shown in the following example:
1> re:run("xyzabc","(*COMMIT)abc",[{capture,all,list}]).
{match,["abc"]}
2> re:run("xyzabc","(*COMMIT)abc",[{capture,all,list},no_start_optimize]).
nomatch
For this pattern, PCRE knows that any match must start with "a", so the optimization skips along the
subject to "a" before applying the pattern to the first set of data. The match attempt then succeeds. In
the second call the no_start_optimize disables the optimization that skips along to the first character.
The pattern is now applied starting at "x", and so the (*COMMIT) causes the match to fail without trying
any other starting points.
The following verb causes the match to fail at the current starting position in the subject if there is a
later matching failure that causes backtracking to reach it:
(*PRUNE) or (*PRUNE:NAME)
If the pattern is unanchored, the normal "bumpalong" advance to the next starting character then occurs.
Backtracking can occur as usual to the left of (*PRUNE), before it is reached, or when matching to the
right of (*PRUNE), but if there is no match to the right, backtracking cannot cross (*PRUNE). In simple
cases, the use of (*PRUNE) is just an alternative to an atomic group or possessive quantifier, but there
are some uses of (*PRUNE) that cannot be expressed in any other way. In an anchored pattern, (*PRUNE) has
the same effect as (*COMMIT).
The behavior of (*PRUNE:NAME) is the not the same as (*MARK:NAME)(*PRUNE). It is like (*MARK:NAME) in
that the name is remembered for passing back to the caller. However, (*SKIP:NAME) searches only for names
set with (*MARK).
Note:
The fact that (*PRUNE:NAME) remembers the name is useless to the Erlang programmer, as names cannot be
retrieved.
The following verb, when specified without a name, is like (*PRUNE), except that if the pattern is
unanchored, the "bumpalong" advance is not to the next character, but to the position in the subject
where (*SKIP) was encountered.
(*SKIP)
(*SKIP) signifies that whatever text was matched leading up to it cannot be part of a successful match.
Consider:
a+(*SKIP)b
If the subject is "aaaac...", after the first match attempt fails (starting at the first character in the
string), the starting point skips on to start the next attempt at "c". Notice that a possessive
quantifier does not have the same effect as this example; although it would suppress backtracking during
the first match attempt, the second attempt would start at the second character instead of skipping on to
"c".
When (*SKIP) has an associated name, its behavior is modified:
(*SKIP:NAME)
When this is triggered, the previous path through the pattern is searched for the most recent (*MARK)
that has the same name. If one is found, the "bumpalong" advance is to the subject position that
corresponds to that (*MARK) instead of to where (*SKIP) was encountered. If no (*MARK) with a matching
name is found, (*SKIP) is ignored.
Notice that (*SKIP:NAME) searches only for names set by (*MARK:NAME). It ignores names that are set by
(*PRUNE:NAME) or (*THEN:NAME).
The following verb causes a skip to the next innermost alternative when backtracking reaches it. That is,
it cancels any further backtracking within the current alternative.
(*THEN) or (*THEN:NAME)
The verb name comes from the observation that it can be used for a pattern-based if-then-else block:
( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...
If the COND1 pattern matches, FOO is tried (and possibly further items after the end of the group if FOO
succeeds). On failure, the matcher skips to the second alternative and tries COND2, without backtracking
into COND1. If that succeeds and BAR fails, COND3 is tried. If BAZ then fails, there are no more
alternatives, so there is a backtrack to whatever came before the entire group. If (*THEN) is not inside
an alternation, it acts like (*PRUNE).
The behavior of (*THEN:NAME) is the not the same as (*MARK:NAME)(*THEN). It is like (*MARK:NAME) in that
the name is remembered for passing back to the caller. However, (*SKIP:NAME) searches only for names set
with (*MARK).
Note:
The fact that (*THEN:NAME) remembers the name is useless to the Erlang programmer, as names cannot be
retrieved.
A subpattern that does not contain a | character is just a part of the enclosing alternative; it is not a
nested alternation with only one alternative. The effect of (*THEN) extends beyond such a subpattern to
the enclosing alternative. Consider the following pattern, where A, B, and so on, are complex pattern
fragments that do not contain any | characters at this level:
A (B(*THEN)C) | D
If A and B are matched, but there is a failure in C, matching does not backtrack into A; instead it moves
to the next alternative, that is, D. However, if the subpattern containing (*THEN) is given an
alternative, it behaves differently:
A (B(*THEN)C | (*FAIL)) | D
The effect of (*THEN) is now confined to the inner subpattern. After a failure in C, matching moves to
(*FAIL), which causes the whole subpattern to fail, as there are no more alternatives to try. In this
case, matching does now backtrack into A.
Notice that a conditional subpattern is not considered as having two alternatives, as only one is ever
used. That is, the | character in a conditional subpattern has a different meaning. Ignoring whitespace,
consider:
^.*? (?(?=a) a | b(*THEN)c )
If the subject is "ba", this pattern does not match. As .*? is ungreedy, it initially matches zero
characters. The condition (?=a) then fails, the character "b" is matched, but "c" is not. At this point,
matching does not backtrack to .*? as can perhaps be expected from the presence of the | character. The
conditional subpattern is part of the single alternative that comprises the whole pattern, and so the
match fails. (If there was a backtrack into .*?, allowing it to match "b", the match would succeed.)
The verbs described above provide four different "strengths" of control when subsequent matching fails:
* (*THEN) is the weakest, carrying on the match at the next alternative.
* (*PRUNE) comes next, fails the match at the current starting position, but allows an advance to the
next character (for an unanchored pattern).
* (*SKIP) is similar, except that the advance can be more than one character.
* (*COMMIT) is the strongest, causing the entire match to fail.
More than One Backtracking Verb
If more than one backtracking verb is present in a pattern, the one that is backtracked onto first acts.
For example, consider the following pattern, where A, B, and so on, are complex pattern fragments:
(A(*COMMIT)B(*THEN)C|ABD)
If A matches but B fails, the backtrack to (*COMMIT) causes the entire match to fail. However, if A and B
match, but C fails, the backtrack to (*THEN) causes the next alternative (ABD) to be tried. This behavior
is consistent, but is not always the same as in Perl. It means that if two or more backtracking verbs
appear in succession, the last of them has no effect. Consider the following example:
...(*COMMIT)(*PRUNE)...
If there is a matching failure to the right, backtracking onto (*PRUNE) causes it to be triggered, and
its action is taken. There can never be a backtrack onto (*COMMIT).
Backtracking Verbs in Repeated Groups
PCRE differs from Perl in its handling of backtracking verbs in repeated groups. For example, consider:
/(a(*COMMIT)b)+ac/
If the subject is "abac", Perl matches, but PCRE fails because the (*COMMIT) in the second repeat of the
group acts.
Backtracking Verbs in Assertions
(*FAIL) in an assertion has its normal effect: it forces an immediate backtrack.
(*ACCEPT) in a positive assertion causes the assertion to succeed without any further processing. In a
negative assertion, (*ACCEPT) causes the assertion to fail without any further processing.
The other backtracking verbs are not treated specially if they appear in a positive assertion. In
particular, (*THEN) skips to the next alternative in the innermost enclosing group that has alternations,
regardless if this is within the assertion.
Negative assertions are, however, different, to ensure that changing a positive assertion into a negative
assertion changes its result. Backtracking into (*COMMIT), (*SKIP), or (*PRUNE) causes a negative
assertion to be true, without considering any further alternative branches in the assertion. Backtracking
into (*THEN) causes it to skip to the next enclosing alternative within the assertion (the normal
behavior), but if the assertion does not have such an alternative, (*THEN) behaves like (*PRUNE).
Backtracking Verbs in Subroutines
These behaviors occur regardless if the subpattern is called recursively. The treatment of subroutines in
Perl is different in some cases.
* (*FAIL) in a subpattern called as a subroutine has its normal effect: it forces an immediate
backtrack.
* (*ACCEPT) in a subpattern called as a subroutine causes the subroutine match to succeed without any
further processing. Matching then continues after the subroutine call.
* (*COMMIT), (*SKIP), and (*PRUNE) in a subpattern called as a subroutine cause the subroutine match to
fail.
* (*THEN) skips to the next alternative in the innermost enclosing group within the subpattern that has
alternatives. If there is no such group within the subpattern, (*THEN) causes the subroutine match to
fail.
Ericsson AB stdlib 4.3.1.3 re(3erl)