org.bluez.Device

Connects all profiles the remote device supports that can be connected to and have been flagged as auto-connectable. If only subset of profiles is already connected it will try to connect currently disconnected ones.

If at least one profile was connected successfully this method will indicate success.

For dual-mode devices only one bearer is connected at time, the conditions are in the following order:

2. Connect first the bonded bearer. If no bearers are bonded or both are skip and check latest seen bearer.

3. Connect last seen bearer, in case the timestamps are the same BR/EDR takes precedence.

Possible errors:

Disconnects all connected profiles and then terminates low-level ACL connection.

ACL connection will be terminated even if some profiles were not disconnected properly e.g. due to misbehaving device.

This method can be also used to cancel a preceding Connect call before a reply to it has been received.

For non-trusted devices connected over LE bearer calling this method will disable incoming connections until Connect method is called again.

Possible errors:

Connects a specific profile of this device. The UUID provided is the remote service UUID for the profile.

Possible errors:

Disconnects a specific profile of this device. The profile needs to be registered client profile.

There is no connection tracking for a profile, so as long as the profile is registered this will always succeed.

Possible errors:

Connects to the remote device and initiate pairing procedure then proceed with service discovery.

If the application has registered its own agent, then that specific agent will be used. Otherwise it will use the default agent.

Only for applications like a pairing wizard it would make sense to have its own agent. In almost all other cases the default agent will handle this just fine.

In case there is no application agent and also no default agent present, this method will fail.

Possible errors:

Cancels a pairing operation initiated by the Pair method.

Possible errors:

The Bluetooth device address of the remote device.

The Bluetooth device Address Type. For dual-mode and BR/EDR only devices this defaults to "public". Single mode LE devices may have either value. If remote device uses privacy than before pairing this represents address type used for connection and Identity Address after pairing.

Possible values:

The Bluetooth remote name.

This value is only present for completeness. It is better to always use the Alias property when displaying the devices name.

If the Alias property is unset, it will reflect this value which makes it more convenient.

Proposed icon name according to the freedesktop.org icon naming specification.

The Bluetooth class of device of the remote device.

External appearance of device, as found on GAP service.

List of 128-bit UUIDs that represents the available remote services.

Indicates if the remote device is paired. Paired means the pairing process where devices exchange the information to establish an encrypted connection has been completed.

Indicates if the remote device is bonded. Bonded means the information exchanged on pairing process has been stored and will be persisted.

Indicates if the remote device is currently connected. A PropertiesChanged signal indicate changes to this status.

Indicates if the remote is seen as trusted. This setting can be changed by the application.

If set to true any incoming connections from the device will be immediately rejected. Any device drivers will also be removed and no new ones will be probed as long as the device is blocked.

If set to true this device will be allowed to wake the host from system suspend.

The name alias for the remote device. The alias can be used to have a different friendly name for the remote device.

In case no alias is set, it will return the remote device name. Setting an empty string as alias will convert it back to the remote device name.

When resetting the alias with an empty string, the property will default back to the remote name.

The object path of the adapter the device belongs to.

Set to true if the device only supports the pre-2.1 pairing mechanism. This property is useful during device discovery to anticipate whether legacy or simple pairing will occur if pairing is initiated.

Note that this property can exhibit false-positives in the case of Bluetooth 2.1 (or newer) devices that have disabled Extended Inquiry Response support.

Remote Device ID information in modalias format used by the kernel and udev.

Received Signal Strength Indicator of the remote device (inquiry or advertising).

Advertised transmitted power level (inquiry or advertising).

Manufacturer specific advertisement data. Keys are 16 bits Manufacturer ID followed by its byte array value.

Service advertisement data. Keys are the UUIDs in string format followed by its byte array value.

Indicate whether or not service discovery has been resolved.

The Advertising Data Flags of the remote device.

The Advertising Data of the remote device. Keys are 1 byte AD Type followed by data as byte array.

Note: Only types considered safe to be handled by application are exposed.

Possible values:

Example:

The object paths of the sets the device belongs to followed by a dictionary which can contain the following: