Provided by: puppet-agent_8.4.0-1_all 
This page is autogenerated; any changes will get overwritten
Configuration settings
• Each of these settings can be specified in puppet.conf or on the command line.
• Puppet Enterprise (PE) and open source Puppet share the configuration settings
documented here. However, PE defaults differ from open source defaults for some
settings, such as node_terminus, storeconfigs, always_retry_plugins, disable18n,
environment_timeout (when Code Manager is enabled), and the Puppet Server JRuby
max-active-instances setting. To verify PE configuration defaults, check the
puppet.conf or pe-puppet-server.conf file after installation.
• When using boolean settings on the command line, use --setting and --no-setting
instead of --setting (true|false). (Using --setting false results in "Error: Could not
parse application options: needless argument".)
• Settings can be interpolated as $variables in other settings; $environment is special,
in that puppet master will interpolate each agent node´s environment instead of its
own.
• Multiple values should be specified as comma-separated lists; multiple directories
should be separated with the system path separator (usually a colon).
• Settings that represent time intervals should be specified in duration format: an
integer immediately followed by one of the units ´y´ (years of 365 days), ´d´ (days),
´h´ (hours), ´m´ (minutes), or ´s´ (seconds). The unit cannot be combined with other
units, and defaults to seconds when omitted. Examples are ´3600´ which is equivalent
to ´1h´ (one hour), and ´1825d´ which is equivalent to ´5y´ (5 years).
• If you use the splay setting, note that the period that it waits changes each time the
Puppet agent is restarted.
• Settings that take a single file or directory can optionally set the owner, group, and
mode for their value: rundir = $vardir/run { owner = puppet, group = puppet, mode =
644 }
• The Puppet executables ignores any setting that isn´t relevant to their function.
See the configuration guide
https://puppet.com/docs/puppet/latest/config_about_settings.html for more details.
agent_catalog_run_lockfile
A lock file to indicate that a puppet agent catalog run is currently in progress. The file
contains the pid of the process that holds the lock on the catalog run.
• Default: $statedir/agent_catalog_run.lock
agent_disabled_lockfile
A lock file to indicate that puppet agent runs have been administratively disabled. File
contains a JSON object with state information.
• Default: $statedir/agent_disabled.lock
allow_duplicate_certs
Whether to allow a new certificate request to overwrite an existing certificate request.
If true, then the old certificate must be cleaned using puppetserver ca clean, and the new
request signed using puppetserver ca sign.
• Default: false
allow_pson_serialization
Whether when unable to serialize to JSON or other formats, Puppet falls back to PSON. This
option affects both puppetserver´s configuration management service responses and when the
agent saves its cached catalog. This option is useful in preventing the loss of data
because rich data cannot be serialized via PSON.
• Default: false
always_retry_plugins
Affects how we cache attempts to load Puppet resource types and features. If true, then
calls to Puppet.type.<type>? Puppet.feature.<feature>? will always attempt to load the
type or feature (which can be an expensive operation) unless it has already been loaded
successfully. This makes it possible for a single agent run to, e.g., install a package
that provides the underlying capabilities for a type or feature, and then later load that
type or feature during the same run (even if the type or feature had been tested earlier
and had not been available).
If this setting is set to false, then types and features will only be checked once, and if
they are not available, the negative result is cached and returned for all subsequent
attempts to load the type or feature. This behavior is almost always appropriate for the
server, and can result in a significant performance improvement for types and features
that are checked frequently.
• Default: true
autoflush
Whether log files should always flush to disk.
• Default: true
autosign
Whether (and how) to autosign certificate requests. This setting is only relevant on a
Puppet Server acting as a certificate authority (CA).
Valid values are true (autosigns all certificate requests; not recommended), false
(disables autosigning certificates), or the absolute path to a file.
The file specified in this setting may be either a configuration file or a custom policy
executable. Puppet will automatically determine what it is: If the Puppet user (see the
user setting) can execute the file, it will be treated as a policy executable; otherwise,
it will be treated as a config file.
If a custom policy executable is configured, the CA Puppet Server will run it every time
it receives a CSR. The executable will be passed the subject CN of the request as a
command line argument, and the contents of the CSR in PEM format on stdin. It should exit
with a status of 0 if the cert should be autosigned and non-zero if the cert should not be
autosigned.
If a certificate request is not autosigned, it will persist for review. An admin user can
use the puppetserver ca sign command to manually sign it, or can delete the request.
For info on autosign configuration files, see the guide to Puppet´s config files
https://puppet.com/docs/puppet/latest/config_file_autosign.html.
• Default: $confdir/autosign.conf
basemodulepath
The search path for global modules. Should be specified as a list of directories separated
by the system path separator character. (The POSIX path separator is ´:´, and the Windows
path separator is ´;´.)
These are the modules that will be used by all environments. Note that the modules
directory of the active environment will have priority over any global directories. For
more info, see https://puppet.com/docs/puppet/latest/environments_about.html
• Default: $codedir/modules:/opt/puppetlabs/puppet/modules
binder_config
The binder configuration file. Puppet reads this file on each request to configure the
bindings system. If set to nil (the default), a $confdir/binder_config.yaml is optionally
loaded. If it does not exists, a default configuration is used. If the setting
:binding_config is specified, it must reference a valid and existing yaml file.
• Default: ``
bucketdir
Where FileBucket files are stored.
• Default: $vardir/bucket
ca_fingerprint
The expected fingerprint of the CA certificate. If specified, the agent will compare the
CA certificate fingerprint that it downloads against this value and reject the CA
certificate if the values do not match. This only applies during the first download of the
CA certificate.
• Default: ``
ca_name
The name to use the Certificate Authority certificate.
• Default: Puppet CA: $certname
ca_port
The port to use for the certificate authority.
• Default: $serverport
ca_refresh_interval
How often the Puppet agent refreshes its local CA certs. By default the CA certs are
refreshed once every 24 hours. If a different duration is specified, then the agent will
refresh its CA certs whenever it next runs and the elapsed time since the certs were last
refreshed exceeds the duration.
In general, the duration should be greater than the runinterval. Setting it to 0 or an
equal or lesser value than runinterval, will cause the CA certs to be refreshed on every
run.
If the agent downloads new CA certs, the agent will use it for subsequent network
requests. If the refresh request fails or if the CA certs are unchanged on the server,
then the agent run will continue using the local CA certs it already has. This setting can
be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years
(5y).
• Default: 1d
ca_server
The server to use for certificate authority requests. It´s a separate server because it
cannot and does not need to horizontally scale.
• Default: $server
ca_ttl
The default TTL for new certificates. This setting can be a time interval in seconds (30
or 30s), minutes (30m), hours (6h), days (2d), or years (5y).
• Default: 5y
cacert
The CA certificate.
• Default: $cadir/ca_crt.pem
cacrl
The certificate revocation list (CRL) for the CA.
• Default: $cadir/ca_crl.pem
cadir
The root directory for the certificate authority.
• Default: /etc/puppetlabs/puppetserver/ca
cakey
The CA private key.
• Default: $cadir/ca_key.pem
capub
The CA public key.
• Default: $cadir/ca_pub.pem
catalog_cache_terminus
How to store cached catalogs. Valid values are ´json´, ´msgpack´ and ´yaml´. The agent
application defaults to ´json´.
• Default: ``
catalog_terminus
Where to get node catalogs. This is useful to change if, for instance, you´d like to
pre-compile catalogs and store them in memcached or some other easily-accessed store.
• Default: compiler
cert_inventory
The inventory file. This is a text file to which the CA writes a complete listing of all
certificates.
• Default: $cadir/inventory.txt
certdir
The certificate directory.
• Default: $ssldir/certs
certificate_revocation
Whether certificate revocation checking should be enabled, and what level of checking
should be performed.
When certificate revocation is enabled, Puppet expects the contents of its CRL to be one
or more PEM-encoded CRLs concatenated together. When using a cert bundle, CRLs for all CAs
in the chain of trust must be included in the crl file. The chain should be ordered from
least to most authoritative, with the first CRL listed being for the root of the chain and
the last being for the leaf CA.
When certificate_revocation is set to ´true´ or ´chain´, Puppet ensures that each CA in
the chain of trust has not been revoked by its issuing CA.
When certificate_revocation is set to ´leaf´, Puppet verifies certs against the issuing
CA´s revocation list, but it does not verify the revocation status of the issuing CA or
any CA above it within the chain of trust.
When certificate_revocation is set to ´false´, Puppet disables all certificate revocation
checking and does not attempt to download the CRL.
• Default: chain
certname
The name to use when handling certificates. When a node requests a certificate from the CA
Puppet Server, it uses the value of the certname setting as its requested Subject CN.
This is the name used when managing a node´s permissions in Puppet Server´s auth.conf
https://puppet.com/docs/puppetserver/latest/config_file_auth.html. In most cases, it is
also used as the node´s name when matching node definitions
https://puppet.com/docs/puppet/latest/lang_node_definitions.html and requesting data from
an ENC. (This can be changed with the node_name_value and node_name_fact settings,
although you should only do so if you have a compelling reason.)
A node´s certname is available in Puppet manifests as $trusted[´certname´]. (See Facts and
Built-In Variables https://puppet.com/docs/puppet/latest/lang_facts_and_builtin_vars.html
for more details.)
• For best compatibility, you should limit the value of certname to only use lowercase
letters, numbers, periods, underscores, and dashes. (That is, it should match
/A[a-z0-9._-]+Z/.)
• The special value ca is reserved, and can´t be used as the certname for a normal node.
Note: You must set the certname in the main section of the puppet.conf file. Setting
it in a different section causes errors.
Defaults to the node´s fully qualified domain name.
• Default: the Host´s fully qualified domain name, as determined by Facter
ciphers
The list of ciphersuites for TLS connections initiated by puppet. The default value is
chosen to support TLS 1.0 and up, but can be made more restrictive if needed. The
ciphersuites must be specified in OpenSSL format, not IANA.
• Default:
ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA256:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256
classfile
The file in which puppet agent stores a list of the classes associated with the retrieved
configuration. Can be loaded in the separate puppet executable using the --loadclasses
option.
• Default: $statedir/classes.txt
client_datadir
The directory in which serialized data is stored on the client.
• Default: $vardir/client_data
clientbucketdir
Where FileBucket files are stored locally.
• Default: $vardir/clientbucket
clientyamldir
The directory in which client-side YAML data is stored.
• Default: $vardir/client_yaml
code
Code to parse directly. This is essentially only used by puppet, and should only be set if
you´re writing your own Puppet executable.
codedir
The main Puppet code directory. The default for this setting is calculated based on the
user. If the process is running as root or the user that Puppet is supposed to run as, it
defaults to a system directory, but if it´s running as any other user, it defaults to
being in the user´s home directory.
• Default: Unix/Linux: /etc/puppetlabs/code -- Windows: C:\ProgramData\PuppetLabs\code
-- Non-root user: ~/.puppetlabs/etc/code
color
Whether to use colors when logging to the console. Valid values are ansi (equivalent to
true), html, and false, which produces no color.
• Default: ansi
confdir
The main Puppet configuration directory. The default for this setting is calculated based
on the user. If the process is running as root or the user that Puppet is supposed to run
as, it defaults to a system directory, but if it´s running as any other user, it defaults
to being in the user´s home directory.
• Default: Unix/Linux: /etc/puppetlabs/puppet -- Windows:
C:\ProgramData\PuppetLabs\puppet\etc -- Non-root user: ~/.puppetlabs/etc/puppet
config
The configuration file for the current puppet application.
• Default: $confdir/${config_file_name}
config_file_name
The name of the puppet config file.
• Default: puppet.conf
config_version
How to determine the configuration version. By default, it will be the time that the
configuration is parsed, but you can provide a shell script to override how the version is
determined. The output of this script will be added to every log message in the reports,
allowing you to correlate changes on your hosts to the source version on the server.
Setting a global value for config_version in puppet.conf is not allowed (but it can be
overridden from the commandline). Please set a per-environment value in environment.conf
instead. For more info, see https://puppet.com/docs/puppet/latest/environments_about.html
configprint
Prints the value of a specific configuration setting. If the name of a setting is provided
for this, then the value is printed and puppet exits. Comma-separate multiple values. For
a list of all values, specify ´all´. This setting is deprecated, the ´puppet config´
command replaces this functionality.
crl_refresh_interval
How often the Puppet agent refreshes its local CRL. By default the CRL is refreshed once
every 24 hours. If a different duration is specified, then the agent will refresh its CRL
whenever it next runs and the elapsed time since the CRL was last refreshed exceeds the
duration.
In general, the duration should be greater than the runinterval. Setting it to 0 or an
equal or lesser value than runinterval, will cause the CRL to be refreshed on every run.
If the agent downloads a new CRL, the agent will use it for subsequent network requests.
If the refresh request fails or if the CRL is unchanged on the server, then the agent run
will continue using the local CRL it already has.This setting can be a time interval in
seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).
• Default: 1d
csr_attributes
An optional file containing custom attributes to add to certificate signing requests
(CSRs). You should ensure that this file does not exist on your CA Puppet Server; if it
does, unwanted certificate extensions may leak into certificates created with the
puppetserver ca generate command.
If present, this file must be a YAML hash containing a custom_attributes key and/or an
extension_requests key. The value of each key must be a hash, where each key is a valid
OID and each value is an object that can be cast to a string.
Custom attributes can be used by the CA when deciding whether to sign the certificate, but
are then discarded. Attribute OIDs can be any OID value except the standard CSR attributes
(i.e. attributes described in RFC 2985 section 5.4). This is useful for embedding a
pre-shared key for autosigning policy executables (see the autosign setting), often by
using the 1.2.840.113549.1.9.7 ("challenge password") OID.
Extension requests will be permanently embedded in the final certificate. Extension OIDs
must be in the "ppRegCertExt" (1.3.6.1.4.1.34380.1.1), "ppPrivCertExt"
(1.3.6.1.4.1.34380.1.2), or "ppAuthCertExt" (1.3.6.1.4.1.34380.1.3) OID arcs. The
ppRegCertExt arc is reserved for four of the most common pieces of data to embed: pp_uuid
(.1), pp_instance_id (.2), pp_image_name (.3), and pp_preshared_key (.4) --- in the YAML
file, these can be referred to by their short descriptive names instead of their full OID.
The ppPrivCertExt arc is unregulated, and can be used for site-specific extensions. The
ppAuthCert arc is reserved for two pieces of data to embed: pp_authorization (.1) and
pp_auth_role (.13). As with ppRegCertExt, in the YAML file, these can be referred to by
their short descriptive name instead of their full OID.
• Default: $confdir/csr_attributes.yaml
csrdir
Where the CA stores certificate requests.
• Default: $cadir/requests
daemonize
Whether to send the process into the background. This defaults to true on POSIX systems,
and to false on Windows (where Puppet currently cannot daemonize).
• Default: true
data_binding_terminus
This setting has been deprecated. Use of any value other than ´hiera´ should instead be
configured in a version 5 hiera.yaml. Until this setting is removed, it controls which
data binding terminus to use for global automatic data binding (across all environments).
By default this value is ´hiera´. A value of ´none´ turns off the global binding.
• Default: hiera
default_file_terminus
The default source for files if no server is given in a uri, e.g. puppet:///file. The
default of rest causes the file to be retrieved using the server setting. When running
apply the default is file_server, causing requests to be filled locally.
• Default: rest
default_manifest
The default main manifest for directory environments. Any environment that doesn´t set the
manifest setting in its environment.conf file will use this manifest.
This setting´s value can be an absolute or relative path. An absolute path will make all
environments default to the same main manifest; a relative path will allow each
environment to use its own manifest, and Puppet will resolve the path relative to each
environment´s main directory.
In either case, the path can point to a single file or to a directory of manifests to be
evaluated in alphabetical order.
• Default: ./manifests
default_schedules
Boolean; whether to generate the default schedule resources. Setting this to false is
useful for keeping external report processors clean of skipped schedule resources.
• Default: true
deviceconfdir
The root directory of devices´ $confdir.
• Default: $confdir/devices
deviceconfig
Path to the device config file for puppet device.
• Default: $confdir/device.conf
devicedir
The root directory of devices´ $vardir.
• Default: $vardir/devices
diff
Which diff command to use when printing differences between files. This setting has no
default value on Windows, as standard diff is not available, but Puppet can use many
third-party diff tools.
• Default: diff
diff_args
Which arguments to pass to the diff command when printing differences between files. The
command to use can be chosen with the diff setting.
• Default: -u
digest_algorithm
Which digest algorithm to use for file resources and the filebucket. Valid values are
sha256, sha384, sha512, sha224, md5. Default is sha256.
• Default: sha256
disable_i18n
If true, turns off all translations of Puppet and module log messages, which affects
error, warning, and info log messages, as well as any translations in the report and CLI.
• Default: true
disable_per_environment_manifest
Whether to disallow an environment-specific main manifest. When set to true, Puppet will
use the manifest specified in the default_manifest setting for all environments. If an
environment specifies a different main manifest in its environment.conf file, catalog
requests for that environment will fail with an error.
This setting requires default_manifest to be set to an absolute path.
• Default: false
disable_warnings
A comma-separated list of warning types to suppress. If large numbers of warnings are
making Puppet´s logs too large or difficult to use, you can temporarily silence them with
this setting.
If you are preparing to upgrade Puppet to a new major version, you should re-enable all
warnings for a while.
Valid values for this setting are:
• deprecations --- disables deprecation warnings.
• undefined_variables --- disables warnings about non existing variables.
• undefined_resources --- disables warnings about non existing resources.
• Default: []
dns_alt_names
A comma-separated list of alternate DNS names for Puppet Server. These are extra hostnames
(in addition to its certname) that the server is allowed to use when serving agents.
Puppet checks this setting when automatically creating a certificate for Puppet agent or
Puppet Server. These can be either IP or DNS, and the type should be specified and
followed with a colon. Untyped inputs will default to DNS.
In order to handle agent requests at a given hostname (like "puppet.example.com"), Puppet
Server needs a certificate that proves it´s allowed to use that name; if a server shows a
certificate that doesn´t include its hostname, Puppet agents will refuse to trust it. If
you use a single hostname for Puppet traffic but load-balance it to multiple Puppet
Servers, each of those servers needs to include the official hostname in its list of extra
names.
Note: The list of alternate names is locked in when the server´s certificate is signed. If
you need to change the list later, you can´t just change this setting; you also need to
regenerate the certificate. For more information on that process, see the cert regen docs
https://puppet.com/docs/puppet/latest/ssl_regenerate_certificates.html.
To see all the alternate names your servers are using, log into your CA server and run
puppetserver ca list --all, then check the output for (alt names: ...). Most agent nodes
should NOT have alternate names; the only certs that should have them are Puppet Server
nodes that you want other agents to trust.
document_all
Whether to document all resources when using puppet doc to generate manifest
documentation.
• Default: false
environment
The environment in which Puppet is running. For clients, such as puppet agent, this
determines the environment itself, which Puppet uses to find modules and much more. For
servers, such as puppet server, this provides the default environment for nodes that
Puppet knows nothing about.
When defining an environment in the [agent] section, this refers to the environment that
the agent requests from the primary server. The environment doesn´t have to exist on the
local filesystem because the agent fetches it from the primary server. This definition is
used when running puppet agent.
When defined in the [user] section, the environment refers to the path that Puppet uses to
search for code and modules related to its execution. This requires the environment to
exist locally on the filesystem where puppet is being executed. Puppet subcommands,
including puppet module and puppet apply, use this definition.
Given that the context and effects vary depending on the config section
https://puppet.com/docs/puppet/latest/config_file_main.html#config-sections in which the
environment setting is defined, do not set it globally.
• Default: production
environment_data_provider
The name of a registered environment data provider used when obtaining environment
specific data. The three built in and registered providers are ´none´ (no data),
´function´ (data obtained by calling the function ´environment::data()´) and ´hiera´ (data
obtained using a data provider configured using a hiera.yaml file in root of the
environment). Other environment data providers may be registered in modules on the module
path. For such custom data providers see the respective module documentation. This setting
is deprecated.
• Default: ``
environment_timeout
How long the Puppet server should cache data it loads from an environment.
A value of 0 will disable caching. This setting can also be set to unlimited, which will
cache environments until the server is restarted or told to refresh the cache. All other
values will result in Puppet server evicting environments that haven´t been used within
the last environment_timeout seconds.
You should change this setting once your Puppet deployment is doing non-trivial work. We
chose the default value of 0 because it lets new users update their code without any extra
steps, but it lowers the performance of your Puppet server. We recommend either:
• Setting this to unlimited and explicitly refreshing your Puppet server as part of your
code deployment process.
• Setting this to a number that will keep your most actively used environments cached,
but allow testing environments to fall out of the cache and reduce memory usage. A
value of 3 minutes (3m) is a reasonable value.
Once you set environment_timeout to a non-zero value, you need to tell Puppet server to
read new code from disk using the environment-cache API endpoint after you deploy new
code. See the docs for the Puppet Server administrative API
https://puppet.com/docs/puppetserver/latest/admin-api/v1/environment-cache.html.
• Default: 0
environmentpath
A search path for directory environments, as a list of directories separated by the system
path separator character. (The POSIX path separator is ´:´, and the Windows path separator
is ´;´.)
This setting must have a value set to enable directory environments. The recommended value
is $codedir/environments. For more details, see
https://puppet.com/docs/puppet/latest/environments_about.html
• Default: $codedir/environments
evaltrace
Whether each resource should log when it is being evaluated. This allows you to
interactively see exactly what is being done.
• Default: false
exclude_unchanged_resources
When set to true, resources that have had no changes after catalog application will not
have corresponding unchanged resource status updates listed in the report.
• Default: true
external_nodes
The external node classifier (ENC) script to use for node data. Puppet combines this data
with the main manifest to produce node catalogs.
To enable this setting, set the node_terminus setting to exec.
This setting´s value must be the path to an executable command that can produce node
information. The command must:
• Take the name of a node as a command-line argument.
•
• classes --- A list of classes, as an array or hash.
• environment --- A string.
• parameters --- A list of top-scope variables to set, as a hash.
• For unknown nodes, exit with a non-zero exit code.
Generally, an ENC script makes requests to an external data source.
For more info, see the ENC documentation
https://puppet.com/docs/puppet/latest/nodes_external.html.
• Default: none
fact_name_length_soft_limit
The soft limit for the length of a fact name.
• Default: 2560
fact_value_length_soft_limit
The soft limit for the length of a fact value.
• Default: 4096
factpath
Where Puppet should look for facts. Multiple directories should be separated by the system
path separator character. (The POSIX path separator is ´:´, and the Windows path separator
is ´;´.)
• Default: $vardir/lib/facter:$vardir/facts
facts_terminus
The node facts terminus.
• Default: facter
fileserverconfig
Where the fileserver configuration is stored.
• Default: $confdir/fileserver.conf
filetimeout
The minimum time to wait between checking for updates in configuration files. This timeout
determines how quickly Puppet checks whether a file (such as manifests or puppet.conf) has
changed on disk. The default will change in a future release to be ´unlimited´, requiring
a reload of the Puppet service to pick up changes to its internal configuration. Currently
we do not accept a value of ´unlimited´. To reparse files within an environment in Puppet
Server please use the environment_cache endpoint
• Default: 15s
forge_authorization
The authorization key to connect to the Puppet Forge. Leave blank for unauthorized or
license based connections
• Default: ``
freeze_main
Freezes the ´main´ class, disallowing any code to be added to it. This essentially means
that you can´t have any code outside of a node, class, or definition other than in the
site manifest.
• Default: false
genconfig
When true, causes Puppet applications to print an example config file to stdout and exit.
The example will include descriptions of each setting, and the current (or default) value
of each setting, incorporating any settings overridden on the CLI (with the exception of
genconfig itself). This setting only makes sense when specified on the command line as
--genconfig.
• Default: false
genmanifest
Whether to just print a manifest to stdout and exit. Only makes sense when specified on
the command line as --genmanifest. Takes into account arguments specified on the CLI.
• Default: false
graph
Whether to create .dot graph files, which let you visualize the dependency and containment
relationships in Puppet´s catalog. You can load and view these files with tools like
OmniGraffle http://www.omnigroup.com/applications/omnigraffle/ (OS X) or graphviz
http://www.graphviz.org/ (multi-platform).
Graph files are created when applying a catalog, so this setting should be used on nodes
running puppet agent or puppet apply.
The graphdir setting determines where Puppet will save graphs. Note that we don´t save
graphs for historical runs; Puppet will replace the previous .dot files with new ones
every time it applies a catalog.
See your graphing software´s documentation for details on opening .dot files. If you´re
using GraphViz´s dot command, you can do a quick PNG render with dot -Tpng <DOT FILE> -o
<OUTPUT FILE>.
• Default: false
graphdir
Where to save .dot-format graphs (when the graph setting is enabled).
• Default: $statedir/graphs
group
The group Puppet Server will run as. Used to ensure the agent side processes (agent,
apply, etc) create files and directories readable by Puppet Server when necessary.
• Default: puppet
hiera_config
The hiera configuration file. Puppet only reads this file on startup, so you must restart
the puppet server every time you edit it.
• Default: $confdir/hiera.yaml. However, for backwards compatibility, if a file exists
at $codedir/hiera.yaml, Puppet uses that instead.
hostcert
Where individual hosts store and look for their certificates.
• Default: $certdir/$certname.pem
hostcert_renewal_interval
When the Puppet agent refreshes its client certificate. By default the client certificate
will refresh 30 days before the certificate expires. If a different duration is specified,
then the agent will refresh its client certificate whenever it next runs and if the client
certificate expires within the duration specified.
In general, the duration should be greater than the runinterval. Setting it to 0 will
disable automatic renewal.
If the agent downloads a new certificate, the agent will use it for subsequent network
requests. If the refresh request fails, then the agent run will continue using the
certificate it already has. This setting can be a time interval in seconds (30 or 30s),
minutes (30m), hours (6h), days (2d), or years (5y).
• Default: 30d
hostcrl
Where the host´s certificate revocation list can be found. This is distinct from the
certificate authority´s CRL.
• Default: $ssldir/crl.pem
hostcsr
Where individual hosts store their certificate request (CSR) while waiting for the CA to
issue their certificate.
• Default: $requestdir/$certname.pem
hostprivkey
Where individual hosts store and look for their private key.
• Default: $privatekeydir/$certname.pem
hostpubkey
Where individual hosts store and look for their public key.
• Default: $publickeydir/$certname.pem
http_connect_timeout
The maximum amount of time to wait when establishing an HTTP connection. The default value
is 2 minutes. This setting can be a time interval in seconds (30 or 30s), minutes (30m),
hours (6h), days (2d), or years (5y).
• Default: 2m
http_debug
Whether to write HTTP request and responses to stderr. This should never be used in a
production environment.
• Default: false
http_extra_headers
The list of extra headers that will be sent with http requests to the primary server. The
header definition consists of a name and a value separated by a colon.
• Default: []
http_keepalive_timeout
The maximum amount of time a persistent HTTP connection can remain idle in the connection
pool, before it is closed. This timeout should be shorter than the keepalive timeout used
on the HTTP server, e.g. Apache KeepAliveTimeout directive. This setting can be a time
interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).
• Default: 4s
http_proxy_host
The HTTP proxy host to use for outgoing connections. The proxy will be bypassed if the
server´s hostname matches the NO_PROXY environment variable or no_proxy setting. Note: You
may need to use a FQDN for the server hostname when using a proxy. Environment variable
http_proxy or HTTP_PROXY will override this value.
• Default: none
http_proxy_password
The password for the user of an authenticated HTTP proxy. Requires the http_proxy_user
setting.
Note that passwords must be valid when used as part of a URL. If a password contains any
characters with special meanings in URLs (as specified by RFC 3986 section 2.2), they must
be URL-encoded. (For example, # would become %23.)
• Default: none
http_proxy_port
The HTTP proxy port to use for outgoing connections
• Default: 3128
http_proxy_user
The user name for an authenticated HTTP proxy. Requires the http_proxy_host setting.
• Default: none
http_read_timeout
The time to wait for data to be read from an HTTP connection. If nothing is read after the
elapsed interval then the connection will be closed. The default value is 10 minutes. This
setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days
(2d), or years (5y).
• Default: 10m
http_user_agent
The HTTP User-Agent string to send when making network requests.
• Default: Puppet/8.4.0 Ruby/3.1.1-p18 (x86_64-linux)
ignore_plugin_errors
Whether the puppet run should ignore errors during pluginsync. If the setting is false and
there are errors during pluginsync, then the agent will abort the run and submit a report
containing information about the failed run.
• Default: false
ignoremissingtypes
Skip searching for classes and definitions that were missing during a prior compilation.
The list of missing objects is maintained per-environment and persists until the
environment is cleared or the primary server is restarted.
• Default: false
ignoreschedules
Boolean; whether puppet agent should ignore schedules. This is useful for initial puppet
agent runs.
• Default: false
include_legacy_facts
Whether to include legacy facts when requesting a catalog. This option can be set to false
provided all puppet manifests, hiera.yaml and hiera configuration layers no longer access
legacy facts, such as $osfamily, and instead access structured facts, such as
$facts[´os´][´family´].
• Default: false
key_type
The type of private key. Valid values are rsa and ec. Default is rsa.
• Default: rsa
keylength
The bit length of keys.
• Default: 4096
lastrunfile
Where puppet agent stores the last run report summary in yaml format.
• Default: $publicdir/last_run_summary.yaml
lastrunreport
Where Puppet Agent stores the last run report, by default, in yaml format. The format of
the report can be changed by setting the cache key of the report terminus in the
routes.yaml https://puppet.com/docs/puppet/latest/config_file_routes.html file. To avoid
mismatches between content and file extension, this setting needs to be manually updated
to reflect the terminus changes.
• Default: $statedir/last_run_report.yaml
ldapattrs
The LDAP attributes to include when querying LDAP for nodes. All returned attributes are
set as variables in the top-level scope. Multiple values should be comma-separated. The
value ´all´ returns all attributes.
• Default: all
ldapbase
The search base for LDAP searches. It´s impossible to provide a meaningful default here,
although the LDAP libraries might have one already set. Generally, it should be the
´ou=Hosts´ branch under your main directory.
ldapclassattrs
The LDAP attributes to use to define Puppet classes. Values should be comma-separated.
• Default: puppetclass
ldapparentattr
The attribute to use to define the parent node.
• Default: parentnode
ldappassword
The password to use to connect to LDAP.
ldapport
The LDAP port.
• Default: 389
ldapserver
The LDAP server.
• Default: ldap
ldapssl
Whether SSL should be used when searching for nodes. Defaults to false because SSL usually
requires certificates to be set up on the client side.
• Default: false
ldapstackedattrs
The LDAP attributes that should be stacked to arrays by adding the values in all hierarchy
elements of the tree. Values should be comma-separated.
• Default: puppetvar
ldapstring
The search string used to find an LDAP node.
• Default: (&(objectclass=puppetClient)(cn=%s))
ldaptls
Whether TLS should be used when searching for nodes. Defaults to false because TLS usually
requires certificates to be set up on the client side.
• Default: false
ldapuser
The user to use to connect to LDAP. Must be specified as a full DN.
libdir
An extra search path for Puppet. This is only useful for those files that Puppet will load
on demand, and is only guaranteed to work for those cases. In fact, the autoload mechanism
is responsible for making sure this directory is in Ruby´s search path
• Default: $vardir/lib
localcacert
Where each client stores the CA certificate.
• Default: $certdir/ca.pem
localedest
Where Puppet should store translation files that it pulls down from the central server.
• Default: $vardir/locales
localesource
From where to retrieve translation files. The standard Puppet file type is used for
retrieval, so anything that is a valid file source can be used here.
• Default: puppet:///locales
location_trusted
This will allow sending the name + password and the cookie header to all hosts that puppet
may redirect to. This may or may not introduce a security breach if puppet redirects you
to a site to which you´ll send your authentication info and cookies.
• Default: false
log_level
Default logging level for messages from Puppet. Allowed values are:
• debug
• info
• notice
• warning
• err
• alert
• emerg
• crit
• Default: notice
logdest
Where to send log messages. Choose between ´syslog´ (the POSIX syslog service), ´eventlog´
(the Windows Event Log), ´console´, or the path to a log file. Multiple destinations can
be set using a comma separated list (eg: /path/file1,console,/path/file2)
• Default: ``
logdir
The directory in which to store log files
• Default: Unix/Linux: /var/log/puppetlabs/puppet -- Windows:
C:\ProgramData\PuppetLabs\puppet\var\log -- Non-root user: ~/.puppetlabs/var/log
manage_internal_file_permissions
Whether Puppet should manage the owner, group, and mode of files it uses internally. Note:
For Windows agents, the default is false for versions 4.10.13 and greater, versions 5.5.6
and greater, and versions 6.0 and greater.
• Default: true
manifest
The entry-point manifest for the primary server. This can be one file or a directory of
manifests to be evaluated in alphabetical order. Puppet manages this path as a directory
if one exists or if the path ends with a / or .
Setting a global value for manifest in puppet.conf is not allowed (but it can be
overridden from the commandline). Please use directory environments instead. If you need
to use something other than the environment´s manifests directory as the main manifest,
you can set manifest in environment.conf. For more info, see
https://puppet.com/docs/puppet/latest/environments_about.html
• Default: ``
masterport
The default port puppet subcommands use to communicate with Puppet Server. (eg puppet
facts upload, puppet agent). May be overridden by more specific settings (see ca_port,
report_port).
• Default: 8140
max_deprecations
Sets the max number of logged/displayed parser validation deprecation warnings in case
multiple deprecation warnings have been detected. A value of 0 blocks the logging of
deprecation warnings. The count is per manifest.
• Default: 10
max_errors
Sets the max number of logged/displayed parser validation errors in case multiple errors
have been detected. A value of 0 is the same as a value of 1; a minimum of one error is
always raised. The count is per manifest.
• Default: 10
max_warnings
Sets the max number of logged/displayed parser validation warnings in case multiple
warnings have been detected. A value of 0 blocks logging of warnings. The count is per
manifest.
• Default: 10
maximum_uid
The maximum allowed UID. Some platforms use negative UIDs but then ship with tools that do
not know how to handle signed ints, so the UIDs show up as huge numbers that can then not
be fed back into the system. This is a hackish way to fail in a slightly more useful way
when that happens.
• Default: 4294967290
maxwaitforcert
The maximum amount of time the Puppet agent should wait for its certificate request to be
signed. A value of unlimited will cause puppet agent to ask for a signed certificate
indefinitely. This setting can be a time interval in seconds (30 or 30s), minutes (30m),
hours (6h), days (2d), or years (5y).
• Default: unlimited
maxwaitforlock
The maximum amount of time the puppet agent should wait for an already running puppet
agent to finish before starting a new one. This is set by default to 1 minute. A value of
unlimited will cause puppet agent to wait indefinitely. This setting can be a time
interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).
• Default: 1m
merge_dependency_warnings
Whether to merge class-level dependency failure warnings.
When a class has a failed dependency, every resource in the class generates a notice level
message about the dependency failure, and a warning level message about skipping the
resource.
If true, all messages caused by a class dependency failure are merged into one message
associated with the class.
• Default: false
mkusers
Whether to create the necessary user and group that puppet agent will run as.
• Default: false
module_groups
Extra module groups to request from the Puppet Forge. This is an internal setting, and
users should never change it.
• Default: ``
module_repository
The module repository
• Default: https://forgeapi.puppet.com
module_working_dir
The directory into which module tool data is stored
• Default: $vardir/puppet-module
modulepath
The search path for modules, as a list of directories separated by the system path
separator character. (The POSIX path separator is ´:´, and the Windows path separator is
´;´.)
Setting a global value for modulepath in puppet.conf is not allowed (but it can be
overridden from the commandline). Please use directory environments instead. If you need
to use something other than the default modulepath of <ACTIVE ENVIRONMENT´S MODULES
DIR>:$basemodulepath, you can set modulepath in environment.conf. For more info, see
https://puppet.com/docs/puppet/latest/environments_about.html
name
The name of the application, if we are running as one. The default is essentially $0
without the path or .rb.
• Default: ``
named_curve
The short name for the EC curve used to generate the EC private key. Valid values must be
one of the curves in OpenSSL::PKey::EC.builtin_curves. Default is prime256v1.
• Default: prime256v1
no_proxy
List of host or domain names that should not go through http_proxy_host. Environment
variable no_proxy or NO_PROXY will override this value. Names can be specified as an FQDN
host.example.com, wildcard *.example.com, dotted domain .example.com, or suffix
example.com.
• Default: localhost, 127.0.0.1
node_cache_terminus
How to store cached nodes. Valid values are (none), ´json´, ´msgpack´, or ´yaml´.
• Default: ``
node_name_fact
The fact name used to determine the node name used for all requests the agent makes to the
primary server. WARNING: This setting is mutually exclusive with node_name_value. Changing
this setting also requires changes to Puppet Server´s default auth.conf
https://puppet.com/docs/puppetserver/latest/config_file_auth.html.
node_name_value
The explicit value used for the node name for all requests the agent makes to the primary
server. WARNING: This setting is mutually exclusive with node_name_fact. Changing this
setting also requires changes to Puppet Server´s default auth.conf
https://puppet.com/docs/puppetserver/latest/config_file_auth.html.
• Default: $certname
node_terminus
Which node data plugin to use when compiling node catalogs.
When Puppet compiles a catalog, it combines two primary sources of info: the main
manifest, and a node data plugin (often called a "node terminus," for historical reasons).
Node data plugins provide three things for a given node name:
1. A list of classes to add to that node´s catalog (and, optionally, values for their
parameters).
2. Which Puppet environment the node should use.
3. A list of additional top-scope variables to set.
The three main node data plugins are:
• plain --- Returns no data, so that the main manifest controls all node configuration.
• exec --- Uses an external node classifier (ENC)
https://puppet.com/docs/puppet/latest/nodes_external.html, configured by the
external_nodes setting. This lets you pull a list of Puppet classes from any external
system, using a small glue script to perform the request and format the result as
YAML.
• classifier (formerly console) --- Specific to Puppet Enterprise. Uses the PE console
for node data."
• Default: plain
noop
Whether to apply catalogs in noop mode, which allows Puppet to partially simulate a normal
run. This setting affects puppet agent and puppet apply.
When running in noop mode, Puppet will check whether each resource is in sync, like it
does when running normally. However, if a resource attribute is not in the desired state
(as declared in the catalog), Puppet will take no action, and will instead report the
changes it would have made. These simulated changes will appear in the report sent to the
primary Puppet server, or be shown on the console if running puppet agent or puppet apply
in the foreground. The simulated changes will not send refresh events to any subscribing
or notified resources, although Puppet will log that a refresh event would have been sent.
Important note: The noop metaparameter
https://puppet.com/docs/puppet/latest/metaparameter.html#noop allows you to apply
individual resources in noop mode, and will override the global value of the noop setting.
This means a resource with noop => false will be changed if necessary, even when running
puppet agent with noop = true or --noop. (Conversely, a resource with noop => true will
only be simulated, even when noop mode is globally disabled.)
• Default: false
number_of_facts_soft_limit
The soft limit for the total number of facts.
• Default: 2048
onetime
Perform one configuration run and exit, rather than spawning a long-running daemon. This
is useful for interactively running puppet agent, or running puppet agent from cron.
• Default: false
passfile
Where puppet agent stores the password for its private key. Generally unused.
• Default: $privatedir/password
path
The shell search path. Defaults to whatever is inherited from the parent process.
This setting can only be set in the [main] section of puppet.conf; it cannot be set in
[server], [agent], or an environment config section.
• Default: none
payload_soft_limit
The soft limit for the size of the payload.
• Default: 16777216
pidfile
The file containing the PID of a running process. This file is intended to be used by
service management frameworks and monitoring systems to determine if a puppet process is
still in the process table.
• Default: $rundir/${run_mode}.pid
plugindest
Where Puppet should store plugins that it pulls down from the central server.
• Default: $libdir
pluginfactdest
Where Puppet should store external facts that are being handled by pluginsync
• Default: $vardir/facts.d
pluginfactsource
Where to retrieve external facts for pluginsync
• Default: puppet:///pluginfacts
pluginsignore
What files to ignore when pulling down plugins.
• Default: .svn CVS .git .hg
pluginsource
From where to retrieve plugins. The standard Puppet file type is used for retrieval, so
anything that is a valid file source can be used here.
• Default: puppet:///plugins
pluginsync
Whether plugins should be synced with the central server. This setting is deprecated.
• Default: true
postrun_command
A command to run after every agent run. If this command returns a non-zero return code,
the entire Puppet run will be considered to have failed, even though it might have
performed work during the normal run.
preferred_serialization_format
The preferred means of serializing ruby instances for passing over the wire. This won´t
guarantee that all instances will be serialized using this method, since not all classes
can be guaranteed to support this format, but it will be used for all classes that support
it.
• Default: json
preprocess_deferred
Whether puppet should call deferred functions before applying the catalog. If set to true,
then all prerequisites needed for the deferred function must be satisfied prior to puppet
running. If set to false, then deferred functions will follow puppet relationships and
ordering. This allows puppet to install prerequisites needed for a deferred function and
call the deferred function in the same run.
• Default: false
prerun_command
A command to run before every agent run. If this command returns a non-zero return code,
the entire Puppet run will fail.
preview_outputdir
The directory where catalog previews per node are generated.
• Default: $vardir/preview
priority
The scheduling priority of the process. Valid values are ´high´, ´normal´, ´low´, or
´idle´, which are mapped to platform-specific values. The priority can also be specified
as an integer value and will be passed as is, e.g. -5. Puppet must be running as a
privileged user in order to increase scheduling priority.
• Default: ``
privatedir
Where the client stores private certificate information.
• Default: $ssldir/private
privatekeydir
The private key directory.
• Default: $ssldir/private_keys
profile
Whether to enable experimental performance profiling
• Default: false
publicdir
Where Puppet stores public files.
• Default: Unix/Linux: /opt/puppetlabs/puppet/public -- Windows:
C:\ProgramData\PuppetLabs\puppet\public -- Non-root user:
~/.puppetlabs/opt/puppet/public
publickeydir
The public key directory.
• Default: $ssldir/public_keys
puppet_trace
Whether to print the Puppet stack trace on some errors. This is a noop if trace is also
set.
• Default: false
puppetdlog
The fallback log file. This is only used when the --logdest option is not specified AND
Puppet is running on an operating system where both the POSIX syslog service and the
Windows Event Log are unavailable. (Currently, no supported operating systems match that
description.)
Despite the name, both puppet agent and puppet server will use this file as the fallback
logging destination.
For control over logging destinations, see the --logdest command line option in the manual
pages for puppet server, puppet agent, and puppet apply. You can see man pages by running
puppet <SUBCOMMAND> --help, or read them online at
https://puppet.com/docs/puppet/latest/man/.
• Default: $logdir/puppetd.log
report
Whether to send reports after every transaction.
• Default: true
report_configured_environmentpath
When versioned_environment_dirs is true Puppet will readlink the environmentpath when
constructing the environment´s modulepath. The full readlinked path is referred to as the
"resolved path" and the configured path potentially containing symlinks is the "configured
path". When reporting where resources come from users may choose between the configured or
resolved path.
When set to false, the resolved paths are reported instead of the configured paths.
• Default: true
report_include_system_store
Whether the ´http´ report processor should include the system certificate store when
submitting reports to HTTPS URLs. If false, then the ´http´ processor will only trust
HTTPS report servers whose certificates are issued by the puppet CA or one of its
intermediate CAs. If true, the processor will additionally trust CA certificates in the
system´s certificate store.
• Default: false
report_port
The port to communicate with the report_server.
• Default: $serverport
report_server
The server to send transaction reports to.
• Default: $server
reportdir
The directory in which to store reports. Each node gets a separate subdirectory in this
directory. This setting is only used when the store report processor is enabled (see the
reports setting).
• Default: $vardir/reports
reports
The list of report handlers to use. When using multiple report handlers, their names
should be comma-separated, with whitespace allowed. (For example, reports = http, store.)
This setting is relevant to puppet server and puppet apply. The primary Puppet server will
call these report handlers with the reports it receives from agent nodes, and puppet apply
will call them with its own report. (In all cases, the node applying the catalog must have
report = true.)
See the report reference for information on the built-in report handlers; custom report
handlers can also be loaded from modules. (Report handlers are loaded from the lib
directory, at puppet/reports/NAME.rb.)
To turn off reports entirely, set this to none
• Default: store
reporturl
The URL that reports should be forwarded to. This setting is only used when the http
report processor is enabled (see the reports setting).
• Default: http://localhost:3000/reports/upload
requestdir
Where host certificate requests are stored.
• Default: $ssldir/certificate_requests
resourcefile
The file in which puppet agent stores a list of the resources associated with the
retrieved configuration.
• Default: $statedir/resources.txt
resubmit_facts
Whether to send updated facts after every transaction. By default puppet only submits
facts at the beginning of the transaction before applying a catalog. Since puppet can
modify the state of the system, the value of the facts may change after puppet finishes.
Therefore, any facts stored in puppetdb may not be consistent until the agent next runs,
typically in 30 minutes. If this feature is enabled, puppet will resubmit facts after
applying its catalog, ensuring facts for the node stored in puppetdb are current. However,
this will double the fact submission load on puppetdb, so it is disabled by default.
• Default: false
rich_data
Enables having extended data in the catalog by storing them as a hash with the special key
__ptype. When enabled, resource containing values of the data types Binary, Regexp,
SemVer, SemVerRange, Timespan and Timestamp, as well as instances of types derived from
Object retain their data type.
• Default: true
route_file
The YAML file containing indirector route configuration.
• Default: $confdir/routes.yaml
rundir
Where Puppet PID files are kept.
• Default: Unix/Linux: /var/run/puppetlabs -- Windows:
C:\ProgramData\PuppetLabs\puppet\var\run -- Non-root user: ~/.puppetlabs/var/run
runinterval
How often puppet agent applies the catalog. Note that a runinterval of 0 means "run
continuously" rather than "never run." This setting can be a time interval in seconds (30
or 30s), minutes (30m), hours (6h), days (2d), or years (5y).
• Default: 30m
runtimeout
The maximum amount of time an agent run is allowed to take. A Puppet agent run that
exceeds this timeout will be aborted. A value of 0 disables the timeout. Defaults to 1
hour. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours
(6h), days (2d), or years (5y).
• Default: 1h
serial
Where the serial number for certificates is stored.
• Default: $cadir/serial
server
The primary Puppet server to which the Puppet agent should connect.
• Default: puppet
server_datadir
The directory in which serialized data is stored, usually in a subdirectory.
• Default: $vardir/server_data
server_list
The list of primary Puppet servers to which the Puppet agent should connect, in the order
that they will be tried. Each value should be a fully qualified domain name, followed by
an optional ´:´ and port number. If a port is omitted, Puppet uses masterport for that
host.
• Default: []
serverport
The default port puppet subcommands use to communicate with Puppet Server. (eg puppet
facts upload, puppet agent). May be overridden by more specific settings (see ca_port,
report_port).
• Default: 8140
settings_catalog
Whether to compile and apply the settings catalog
• Default: true
show_diff
Whether to log and report a contextual diff when files are being replaced. This causes
partial file contents to pass through Puppet´s normal logging and reporting system, so
this setting should be used with caution if you are sending Puppet´s reports to an
insecure destination. This feature currently requires the diff/lcs Ruby library.
• Default: false
signeddir
Where the CA stores signed certificates.
• Default: $cadir/signed
skip_tags
Tags to use to filter resources. If this is set, then only resources not tagged with the
specified tags will be applied. Values must be comma-separated.
sourceaddress
The address the agent should use to initiate requests.
• Default: ``
splay
Whether to sleep for a random amount of time, ranging from immediately up to its
$splaylimit, before performing its first agent run after a service restart. After this
period, the agent runs periodically on its $runinterval.
For example, assume a default 30-minute $runinterval, splay set to its default of false,
and an agent starting at :00 past the hour. The agent would check in every 30 minutes at
:01 and :31 past the hour.
With splay enabled, it waits any amount of time up to its $splaylimit before its first
run. For example, it might randomly wait 8 minutes, then start its first run at :08 past
the hour. With the $runinterval at its default 30 minutes, its next run will be at :38
past the hour.
If you restart an agent´s puppet service with splay enabled, it recalculates its splay
period and delays its first agent run after restarting for this new period. If you
simultaneously restart a group of puppet agents with splay enabled, their checkins to your
primary servers can be distributed more evenly.
• Default: false
splaylimit
The maximum time to delay before an agent´s first run when splay is enabled. Defaults to
the agent´s $runinterval. The splay interval is random and recalculated each time the
agent is started or restarted. This setting can be a time interval in seconds (30 or 30s),
minutes (30m), hours (6h), days (2d), or years (5y).
• Default: $runinterval
srv_domain
The domain which will be queried to find the SRV records of servers to use.
• Default: example.com
ssl_client_header
The header containing an authenticated client´s SSL DN. This header must be set by the
proxy to the authenticated client´s SSL DN (e.g., /CN=puppet.puppetlabs.com). Puppet will
parse out the Common Name (CN) from the Distinguished Name (DN) and use the value of the
CN field for authorization.
Note that the name of the HTTP header gets munged by the web server common gateway
interface: an HTTP_ prefix is added, dashes are converted to underscores, and all letters
are uppercased. Thus, to use the X-Client-DN header, this setting should be
HTTP_X_CLIENT_DN.
• Default: HTTP_X_CLIENT_DN
ssl_client_verify_header
The header containing the status message of the client verification. This header must be
set by the proxy to ´SUCCESS´ if the client successfully authenticated, and anything else
otherwise.
Note that the name of the HTTP header gets munged by the web server common gateway
interface: an HTTP_ prefix is added, dashes are converted to underscores, and all letters
are uppercased. Thus, to use the X-Client-Verify header, this setting should be
HTTP_X_CLIENT_VERIFY.
• Default: HTTP_X_CLIENT_VERIFY
ssl_lockfile
A lock file to indicate that the ssl bootstrap process is currently in progress.
• Default: $ssldir/ssl.lock
ssl_trust_store
A file containing CA certificates in PEM format that puppet should trust when making HTTPS
requests. This only applies to https requests to non-puppet infrastructure, such as
retrieving file metadata and content from https file sources, puppet module tool and the
´http´ report processor. This setting is ignored when making requests to puppet:// URLs
such as catalog and report requests.
• Default: ``
ssldir
Where SSL certificates are kept.
• Default: $confdir/ssl
statedir
The directory where Puppet state is stored. Generally, this directory can be removed
without causing harm (although it might result in spurious service restarts).
• Default: $vardir/state
statefile
Where Puppet agent and Puppet Server store state associated with the running
configuration. In the case of Puppet Server, this file reflects the state discovered
through interacting with clients.
• Default: $statedir/state.yaml
statettl
How long the Puppet agent should cache when a resource was last checked or synced. This
setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days
(2d), or years (5y). A value of 0 or unlimited will disable cache pruning.
This setting affects the usage of schedule resources, as the information about when a
resource was last checked (and therefore when it needs to be checked again) is stored in
the statefile. The statettl needs to be large enough to ensure that a resource will not
trigger multiple times during a schedule due to its entry expiring from the cache.
• Default: 32d
static_catalogs
Whether to compile a static catalog
https://puppet.com/docs/puppet/latest/static_catalogs.html#enabling-or-disabling-static-catalogs,
which occurs only on Puppet Server when the code-id-command and code-content-command
settings are configured in its puppetserver.conf file.
• Default: true
storeconfigs
Whether to store each client´s configuration, including catalogs, facts, and related data.
This also enables the import and export of resources in the Puppet language - a mechanism
for exchange resources between nodes.
By default this uses the ´puppetdb´ backend.
You can adjust the backend using the storeconfigs_backend setting.
• Default: false
storeconfigs_backend
Configure the backend terminus used for StoreConfigs. By default, this uses the PuppetDB
store, which must be installed and configured before turning on StoreConfigs.
• Default: puppetdb
strict
The strictness level of puppet. Allowed values are:
• off - do not perform extra validation, do not report
• warning - perform extra validation, report as warning
• error - perform extra validation, fail with error (default)
The strictness level is for both language semantics and runtime evaluation validation. In
addition to controlling the behavior with this primary server switch some individual
warnings may also be controlled by the disable_warnings setting.
No new validations will be added to a micro (x.y.z) release, but may be added in minor
releases (x.y.0). In major releases it expected that most (if not all) strictness
validation become standard behavior.
• Default: error
strict_environment_mode
Whether the agent specified environment should be considered authoritative, causing the
run to fail if the retrieved catalog does not match it.
• Default: false
strict_variables
Causes an evaluation error when referencing unknown variables. (This does not affect
referencing variables that are explicitly set to undef).
• Default: true
summarize
Whether to print a transaction summary.
• Default: false
supported_checksum_types
Checksum types supported by this agent for use in file resources of a static catalog.
Values must be comma-separated. Valid types are sha256, sha256lite, sha384, sha512,
sha224, sha1, sha1lite, md5, md5lite, mtime, ctime. Default is sha256, sha384, sha512,
sha224, md5.
• Default: ["sha256", "sha384", "sha512", "sha224", "md5"]
syslogfacility
What syslog facility to use when logging to syslog. Syslog has a fixed list of valid
facilities, and you must choose one of those; you cannot just make one up.
• Default: daemon
tags
Tags to use to find resources. If this is set, then only resources tagged with the
specified tags will be applied. Values must be comma-separated.
tasks
Turns on experimental support for tasks and plans in the puppet language. This is for
internal API use only. Do not change this setting.
• Default: false
top_level_facts_soft_limit
The soft limit for the number of top level facts.
• Default: 512
trace
Whether to print stack traces on some errors. Will print internal Ruby stack trace
interleaved with Puppet function frames.
• Default: false
transactionstorefile
Transactional storage file for persisting data between transactions for the purposes of
inferring information (such as corrective_change) on new data received.
• Default: $statedir/transactionstore.yaml
trusted_external_command
The external trusted facts script or directory to use. This setting´s value can be set to
the path to an executable command that can produce external trusted facts or to a
directory containing those executable commands. The command(s) must:
• Take the name of a node as a command-line argument.
• Return a JSON hash with the external trusted facts for this node.
• For unknown or invalid nodes, exit with a non-zero exit code.
If the setting points to an executable command, then the external trusted facts will be
stored in the ´external´ key of the trusted facts hash. Otherwise for each executable file
in the directory, the external trusted facts will be stored in the <basename> key of the
trusted[´external´] hash. For example, if the files foo.rb and bar.sh are in the
directory, then trusted[´external´] will be the hash { ´foo´ => <foo.rb output>, ´bar´ =>
<bar.sh output> }.
• Default: ``
trusted_oid_mapping_file
File that provides mapping between custom SSL oids and user-friendly names
• Default: $confdir/custom_trusted_oid_mapping.yaml
use_cached_catalog
Whether to only use the cached catalog rather than compiling a new catalog on every run.
Puppet can be run with this enabled by default and then selectively disabled when a
recompile is desired. Because a Puppet agent using cached catalogs does not contact the
primary server for a new catalog, it also does not upload facts at the beginning of the
Puppet run.
• Default: false
use_last_environment
Puppet saves both the initial and converged environment in the last_run_summary file. If
they differ, and this setting is set to true, we will use the last converged environment
and skip the node request.
When set to false, we will do the node request and ignore the environment data from the
last_run_summary file.
• Default: true
use_srv_records
Whether the server will search for SRV records in DNS for the current domain.
• Default: false
usecacheonfailure
Whether to use the cached configuration when the remote configuration will not compile.
This option is useful for testing new configurations, where you want to fix the broken
configuration rather than reverting to a known-good one.
• Default: true
user
The user Puppet Server will run as. Used to ensure the agent side processes (agent, apply,
etc) create files and directories readable by Puppet Server when necessary.
• Default: puppet
vardir
Where Puppet stores dynamic and growing data. The default for this setting is calculated
specially, like confdir_.
• Default: Unix/Linux: /opt/puppetlabs/puppet/cache -- Windows:
C:\ProgramData\PuppetLabs\puppet\cache -- Non-root user:
~/.puppetlabs/opt/puppet/cache
vendormoduledir
The directory containing vendored modules. These modules will be used by all environments
like those in the basemodulepath. The only difference is that modules in the
basemodulepath are pluginsynced, while vendored modules are not
• Default: /opt/puppetlabs/puppet/vendor_modules
versioned_environment_dirs
Whether or not to look for versioned environment directories, symlinked from
$environmentpath/<environment>. This is an experimental feature and should be used with
caution.
• Default: false
waitforcert
How frequently puppet agent should ask for a signed certificate.
When starting for the first time, puppet agent will submit a certificate signing request
(CSR) to the server named in the ca_server setting (usually the primary Puppet server);
this may be autosigned, or may need to be approved by a human, depending on the CA
server´s configuration.
Puppet agent cannot apply configurations until its approved certificate is available.
Since the certificate may or may not be available immediately, puppet agent will
repeatedly try to fetch it at this interval. You can turn off waiting for certificates by
specifying a time of 0, or a maximum amount of time to wait in the maxwaitforcert setting,
in which case puppet agent will exit if it cannot get a cert. This setting can be a time
interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).
• Default: 2m
waitforlock
How frequently puppet agent should try running when there is an already ongoing puppet
agent instance.
This argument is by default disabled (value set to 0). In this case puppet agent will
immediately exit if it cannot run at that moment. When a value other than 0 is set, this
can also be used in combination with the maxwaitforlock argument. This setting can be a
time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).
• Default: 0
write_catalog_summary
Whether to write the classfile and resourcefile after applying the catalog. It is enabled
by default, except when running puppet apply.
• Default: true
yamldir
The directory in which YAML data is stored, usually in a subdirectory.
• Default: $vardir/yaml