Provided by: slapd_2.6.7+dfsg-1~exp1ubuntu8.2_amd64 
NAME
slapo-ppolicy - Password Policy overlay to slapd
SYNOPSIS
/etc/ldap/slapd.conf
DESCRIPTION
The ppolicy overlay is an implementation of the most recent IETF Password Policy proposal for LDAP.
When instantiated, it intercepts, decodes and applies specific password policy controls to overall use of
a backend database, changes to user password fields, etc.
The overlay provides a variety of password control mechanisms. They include password aging -- both
minimum and maximum ages, password reuse and duplication control, account time-outs, mandatory password
resets, acceptable password content, and even grace logins. Different groups of users may be associated
with different password policies, and there is no limit to the number of password policies that may be
created.
Note that some of the policies do not take effect when the operation is performed with the rootdn
identity; all the operations, when performed with any other identity, may be subjected to constraints,
like access control. This overlay requires a rootdn to be configured on the database.
During password update, an identity with manage access to the userPassword attribute is considered a
password administrator where relevant to the IETF Password Policy proposal.
Note that the IETF Password Policy proposal for LDAP makes sense when considering a single-valued
password attribute, while the userPassword attribute allows multiple values. This implementation
enforces a single value for the userPassword attribute, despite its specification.
In addition to supporting the IETF Password Policy, this module supports the SunDS Account Usability
control (1.3.6.1.4.1.42.2.27.9.5.8) on search requests and can send the Netscape Password validity
controls when configured to do so.
CONFIGURATION
These slapd.conf configuration options apply to the ppolicy overlay. They should appear after the overlay
directive.
ppolicy_default <policyDN>
Specify the DN of the pwdPolicy object to use when no specific policy is set on a given user's
entry. If there is no specific policy for an entry and no default is given, then no policies will
be enforced.
ppolicy_forward_updates
Specify that policy state changes that result from Bind operations (such as recording failures,
lockout, etc.) on a consumer should be forwarded to a provider instead of being written directly
into the consumer's local database. This setting is only useful on a replication consumer, and
also requires the updateref setting and chain overlay to be appropriately configured.
ppolicy_hash_cleartext
Specify that cleartext passwords present in Add and Modify requests should be hashed before being
stored in the database. This violates the X.500/LDAP information model, but may be needed to
compensate for LDAP clients that don't use the Password Modify extended operation to manage
passwords. It is recommended that when this option is used that compare, search, and read access
be denied to all directory users.
ppolicy_use_lockout
A client will always receive an LDAP InvalidCredentials response when Binding to a locked account.
By default, when a Password Policy control was provided on the Bind request, a Password Policy
response will be included with no special error code set. This option changes the Password Policy
response to include the AccountLocked error code. Note that sending the AccountLocked error code
provides useful information to an attacker; sites that are sensitive to security issues should not
enable this option.
ppolicy_send_netscape_controls
If set, ppolicy will send the password policy expired (2.16.840.1.113730.3.4.4) and password
policy expiring (2.16.840.1.113730.3.4.5) controls when appropriate. The controls are not sent for
bind requests where the Password policy control has already been requested. Default is not to send
the controls.
ppolicy_check_module <path>
Specify the path of a loadable module containing a check_password() function for additional
password quality checks. The use of this module is described further below in the description of
the pwdPolicyChecker objectclass.
Note: The user-defined loadable module must be in slapd's standard executable search PATH, or an
absolute path must be provided.
Note: Use of a ppolicy_check_module is a non-standard extension to the LDAP password policy
proposal.
OBJECT CLASS
The ppolicy overlay depends on the pwdPolicy object class. The definition of that class is as follows:
( 1.3.6.1.4.1.42.2.27.8.2.1
NAME 'pwdPolicy'
AUXILIARY
SUP top
MUST ( pwdAttribute )
MAY (
pwdMinAge $ pwdMaxAge $ pwdInHistory $
pwdCheckQuality $ pwdMinLength $ pwdMaxLength $
pwdExpireWarning $ pwdGraceAuthnLimit $
pwdGraceExpiry $ pwdLockout $ pwdLockoutDuration $
pwdMaxFailure $ pwdFailureCountInterval $
pwdMustChange $ pwdAllowUserChange $
pwdSafeModify $ pwdMaxRecordedFailure $
pwdMinDelay $ pwdMaxDelay $ pwdMaxIdle ) )
The pwdPolicy class is not structural, and so entries using it require another, structural, object class.
The namedPolicy object class is a good choice. namedPolicy requires a cn attribute, suitable as the
policy entry's rDN.
This implementation also provides an additional pwdPolicyChecker objectclass, used for password quality
checking (see below).
( 1.3.6.1.4.1.4754.2.99.1
NAME 'pwdPolicyChecker'
AUXILIARY
SUP top
MAY ( pwdCheckModule $ pwdCheckModuleArg $ pwdUseCheckModule ) )
Every account that should be subject to password policy control should have a pwdPolicySubentry attribute
containing the DN of a valid pwdPolicy entry, or they can simply use the configured default. In this way
different users may be managed according to different policies.
OBJECT CLASS ATTRIBUTES
Each one of the sections below details the meaning and use of a particular attribute of this pwdPolicy
object class.
pwdAttribute
This attribute contains the name of the attribute to which the password policy is applied. For example,
the password policy may be applied to the userPassword attribute.
Note: in this implementation, the only value accepted for pwdAttribute is userPassword .
( 1.3.6.1.4.1.42.2.27.8.1.1
NAME 'pwdAttribute'
EQUALITY objectIdentifierMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.38 )
pwdMinAge
This attribute contains the number of seconds that must elapse between modifications allowed to the
password. If this attribute is not present, zero seconds is assumed (i.e. the password may be modified
whenever and however often is desired).
( 1.3.6.1.4.1.42.2.27.8.1.2
NAME 'pwdMinAge'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdMaxAge
This attribute contains the number of seconds after which a modified password will expire. If this
attribute is not present, or if its value is zero (0), then passwords will not expire.
( 1.3.6.1.4.1.42.2.27.8.1.3
NAME 'pwdMaxAge'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdInHistory
This attribute is used to specify the maximum number of used passwords that will be stored in the
pwdHistory attribute. If the pwdInHistory attribute is not present, or if its value is zero (0), used
passwords will not be stored in pwdHistory and thus any previously-used password may be reused. No
history checking occurs if the password is being modified by the rootdn, although the password is saved
in the history.
( 1.3.6.1.4.1.42.2.27.8.1.4
NAME 'pwdInHistory'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdCheckQuality
This attribute indicates if and how password syntax will be checked while a password is being modified or
added. If this attribute is not present, or its value is zero (0), no syntax checking will be done. If
its value is one (1), the server will check the syntax, and if the server is unable to check the syntax,
whether due to a client-side hashed password or some other reason, it will be accepted. If its value is
two (2), the server will check the syntax, and if the server is unable to check the syntax it will return
an error refusing the password.
( 1.3.6.1.4.1.42.2.27.8.1.5
NAME 'pwdCheckQuality'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdMinLength
When syntax checking is enabled (see also the pwdCheckQuality attribute), this attribute contains the
minimum length in bytes that will be accepted in a password. If this attribute is not present, minimum
password length is not enforced. If the server is unable to check the length of the password, whether due
to a client-side hashed password or some other reason, the server will, depending on the value of
pwdCheckQuality, either accept the password without checking it (if pwdCheckQuality is zero (0) or one
(1)) or refuse it (if pwdCheckQuality is two (2)). If the number of characters should be enforced with
regards to a particular encoding, the use of an appropriate ppolicy_check_module is required.
( 1.3.6.1.4.1.42.2.27.8.1.6
NAME 'pwdMinLength'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdMaxLength
When syntax checking is enabled (see also the pwdCheckQuality attribute), this attribute contains the
maximum length in bytes that will be accepted in a password. If this attribute is not present, maximum
password length is not enforced. If the server is unable to check the length of the password, whether due
to a client-side hashed password or some other reason, the server will, depending on the value of
pwdCheckQuality, either accept the password without checking it (if pwdCheckQuality is zero (0) or one
(1)) or refuse it (if pwdCheckQuality is two (2)). If the number of characters should be enforced with
regards to a particular encoding, the use of an appropriate ppolicy_check_module is required.
( 1.3.6.1.4.1.42.2.27.8.1.31
NAME 'pwdMaxLength'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdExpireWarning
This attribute contains the maximum number of seconds before a password is due to expire that expiration
warning messages will be returned to a user who is authenticating to the directory. If this attribute is
not present, or if the value is zero (0), no warnings will be sent.
( 1.3.6.1.4.1.42.2.27.8.1.7
NAME 'pwdExpireWarning'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdGraceAuthnLimit
This attribute contains the number of times that an expired password may be used to authenticate a user
to the directory. If this attribute is not present or if its value is zero (0), users with expired
passwords will not be allowed to authenticate to the directory.
( 1.3.6.1.4.1.42.2.27.8.1.8
NAME 'pwdGraceAuthnLimit'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdGraceExpiry
This attribute specifies the number of seconds the grace authentications are valid. If this attribute is
not present or if the value is zero (0), there is no time limit on the grace authentications.
( 1.3.6.1.4.1.42.2.27.8.1.30
NAME 'pwdGraceExpiry'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdLockout
This attribute specifies the action that should be taken by the directory when a user has made a number
of failed attempts to authenticate to the directory. If pwdLockout is set (its value is "TRUE"), the
user will not be allowed to attempt to authenticate to the directory after there have been a specified
number of consecutive failed bind attempts. The maximum number of consecutive failed bind attempts
allowed is specified by the pwdMaxFailure attribute. If pwdLockout is not present, or if its value is
"FALSE", the password may be used to authenticate no matter how many consecutive failed bind attempts
have been made.
( 1.3.6.1.4.1.42.2.27.8.1.9
NAME 'pwdLockout'
EQUALITY booleanMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
SINGLE-VALUE )
pwdLockoutDuration
This attribute contains the number of seconds during which the password cannot be used to authenticate
the user to the directory due to too many consecutive failed bind attempts. (See also pwdLockout and
pwdMaxFailure.) If pwdLockoutDuration is not present, or if its value is zero (0), the password cannot
be used to authenticate the user to the directory again until it is reset by an administrator.
( 1.3.6.1.4.1.42.2.27.8.1.10
NAME 'pwdLockoutDuration'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdMaxFailure
This attribute contains the number of consecutive failed bind attempts after which the password may not
be used to authenticate a user to the directory. If pwdMaxFailure is not present, or its value is zero
(0), then a user will be allowed to continue to attempt to authenticate to the directory, no matter how
many consecutive failed bind attempts have occurred with that user's DN. (See also pwdLockout and
pwdLockoutDuration.)
( 1.3.6.1.4.1.42.2.27.8.1.11
NAME 'pwdMaxFailure'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdMaxRecordedFailure
This attribute contains the maximum number of failed bind attempts to store in a user's entry. If
pwdMaxRecordedFailure is not present, or its value is zero (0), then it defaults to the value of
pwdMaxFailure. If that value is also 0, the default is 5.
( 1.3.6.1.4.1.42.2.27.8.1.32
NAME 'pwdMaxRecordedFailure'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdFailureCountInterval
This attribute contains the number of seconds after which old consecutive failed bind attempts are purged
from the failure counter, even though no successful authentication has occurred. If
pwdFailureCountInterval is not present, or its value is zero (0), the failure counter will only be reset
by a successful authentication.
( 1.3.6.1.4.1.42.2.27.8.1.12
NAME 'pwdFailureCountInterval'
EQUALITY integerMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdMustChange
This attribute specifies whether users must change their passwords when they first bind to the directory
after a password is set or reset by the administrator, or not. If pwdMustChange has a value of "TRUE",
users must change their passwords when they first bind to the directory after a password is set or reset
by the administrator. If pwdMustChange is not present, or its value is "FALSE", users are not required
to change their password upon binding after the administrator sets or resets the password.
( 1.3.6.1.4.1.42.2.27.8.1.13
NAME 'pwdMustChange'
EQUALITY booleanMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
SINGLE-VALUE )
pwdAllowUserChange
This attribute specifies whether users are allowed to change their own passwords or not. If
pwdAllowUserChange is set to "TRUE", or if the attribute is not present, users will be allowed to change
their own passwords. If its value is "FALSE", users will not be allowed to change their own passwords.
Note: this implies that when pwdAllowUserChange is set to "TRUE", users will still be able to change the
password of another user, subjected to access control. This restriction only applies to modifications of
ones's own password. It should also be noted that pwdAllowUserChange was defined in the specification to
provide rough access control to the password attribute in implementations that do not allow fine-grain
access control. Since OpenLDAP provides fine-grain access control, the use of this attribute is
discouraged; ACLs should be used instead (see slapd.access(5) for details).
( 1.3.6.1.4.1.42.2.27.8.1.14
NAME 'pwdAllowUserChange'
EQUALITY booleanMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
SINGLE-VALUE )
pwdSafeModify
This attribute denotes whether the user's existing password must be sent along with their new password
when changing a password. If pwdSafeModify is set to "TRUE", the existing password must be sent along
with the new password. If the attribute is not present, or its value is "FALSE", the existing password
need not be sent along with the new password.
( 1.3.6.1.4.1.42.2.27.8.1.15
NAME 'pwdSafeModify'
EQUALITY booleanMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
SINGLE-VALUE )
pwdMinDelay
This attribute specifies the number of seconds to delay responding to the first failed authentication
attempt. If this attribute is not set or is zero (0), no delays will be used. pwdMaxDelay must also be
specified if pwdMinDelay is set.
Note that this implementation uses a variable lockout instead of delaying the bind response.
( 1.3.6.1.4.1.42.2.27.8.1.24
NAME 'pwdMinDelay'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdMaxDelay
This attribute specifies the maximum number of seconds to delay when responding to a failed
authentication attempt. The time specified in pwdMinDelay is used as the starting time and is then
doubled on each failure until the delay time is greater than or equal to pwdMaxDelay (or a successful
authentication occurs, which resets the failure counter). pwdMinDelay must also be specified if
pwdMaxDelay is set.
Note that this implementation uses a variable lockout instead of delaying the bind response.
( 1.3.6.1.4.1.42.2.27.8.1.25
NAME 'pwdMaxDelay'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdMaxIdle
This attribute specifies the number of seconds an account may remain unused before it becomes locked. If
this attribute is not set or is zero (0), no check is performed. For this to be enforced, lastbind
functionality needs to be enabled on the database, that is olcLastBind is set to TRUE.
( 1.3.6.1.4.1.42.2.27.8.1.26
NAME 'pwdMaxIdle'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE )
pwdUseCheckModule/pwdCheckModuleArg
The pwdUseCheckModule attribute enables use of a loadable module previously configured with
ppolicy_check_module for the current policy. The module must instantiate the check_password() function.
This function will be called to further check a new password if pwdCheckQuality is set to one (1) or two
(2), after all of the built-in password compliance checks have been passed. This function will be called
according to this function prototype:
int check_password (char *pPasswd, struct berval *pErrmsg, Entry *pEntry, struct berval *pArg);
The pPasswd parameter contains the clear-text user password, the pErrmsg parameter points to a struct
berval containing space to return human-readable details about any error it encounters. The bv_len field
must contain the size of the space provided by the bv_val field.
The pEntry parameter is optional, if non-NULL, carries a pointer to the entry whose password is being
checked.
The optional pArg parameter points to a struct berval containing the value of pwdCheckModuleArg in the
effective password policy, if set, otherwise NULL.
If pErrmsg is NULL, then funcName must NOT attempt to use it. A return value of LDAP_SUCCESS from the
called function indicates that the password is ok, any other value indicates that the password is
unacceptable. If the password is unacceptable, the server will return an error to the client, and
pErrmsg may be used to return a human-readable textual explanation of the error. If the space passed in
by the caller is too small, the function may replace it with a dynamically allocated buffer, which will
be free()'d by slapd.
The pwdCheckModule attribute is now obsolete and is ignored.
( 1.3.6.1.4.1.4754.1.99.1
NAME 'pwdCheckModule'
EQUALITY caseExactIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26
OBSOLETE
SINGLE-VALUE )
( 1.3.6.1.4.1.4754.1.99.2
NAME 'pwdCheckModuleArg'
EQUALITY octetStringMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.40
DESC 'Argument to pass to check_password() function'
SINGLE-VALUE )
( 1.3.6.1.4.1.4754.1.99.3
NAME 'pwdUseCheckModule'
EQUALITY booleanMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
SINGLE-VALUE )
OPERATIONAL ATTRIBUTES
The operational attributes used by the ppolicy module are stored in the user's entry. Most of these
attributes are not intended to be changed directly by users; they are there to track user activity. They
have been detailed here so that administrators and users can both understand the workings of the ppolicy
module.
Note that the current IETF Password Policy proposal does not define how these operational attributes are
expected to behave in a replication environment. In general, authentication attempts on a replica server
only affect the copy of the operational attributes on that replica and will not affect any attributes for
a user's entry on the provider. Operational attribute changes resulting from authentication attempts on a
provider will usually replicate to the replicas (and also overwrite any changes that originated on the
replica). These behaviors are not guaranteed and are subject to change when a formal specification
emerges.
userPassword
The userPassword attribute is not strictly part of the ppolicy module. It is, however, the attribute
that is tracked and controlled by the module. Please refer to the standard OpenLDAP schema for its
definition.
pwdPolicySubentry
This attribute refers directly to the pwdPolicy subentry that is to be used for this particular directory
user. If pwdPolicySubentry exists, it must contain the DN of a valid pwdPolicy object. If it does not
exist, the ppolicy module will enforce the default password policy rules on the user associated with this
authenticating DN. If there is no default, or the referenced subentry does not exist, then no policy
rules will be enforced.
( 1.3.6.1.4.1.42.2.27.8.1.23
NAME 'pwdPolicySubentry'
DESC 'The pwdPolicy subentry in effect for
this object'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
SINGLE-VALUE
USAGE directoryOperation)
pwdChangedTime
This attribute denotes the last time that the entry's password was changed. This value is used by the
password expiration policy to determine whether the password is too old to be allowed to be used for user
authentication. If pwdChangedTime does not exist, the user's password will not expire.
( 1.3.6.1.4.1.42.2.27.8.1.16
NAME 'pwdChangedTime'
DESC 'The time the password was last changed'
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
EQUALITY generalizedTimeMatch
ORDERING generalizedTimeOrderingMatch
SINGLE-VALUE
NO-USER-MODIFICATION
USAGE directoryOperation)
pwdAccountLockedTime
This attribute contains the time that the user's account was locked. If the account has been locked, the
password may no longer be used to authenticate the user to the directory. If pwdAccountLockedTime is set
to 000001010000Z, the user's account has been permanently locked and may only be unlocked by an
administrator. Note that account locking only takes effect when the pwdLockout password policy attribute
is set to "TRUE".
( 1.3.6.1.4.1.42.2.27.8.1.17
NAME 'pwdAccountLockedTime'
DESC 'The time an user account was locked'
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
EQUALITY generalizedTimeMatch
ORDERING generalizedTimeOrderingMatch
SINGLE-VALUE
USAGE directoryOperation)
pwdFailureTime
This attribute contains the timestamps of each of the consecutive authentication failures made upon
attempted authentication to this DN (i.e. account). If too many timestamps accumulate here (refer to the
pwdMaxFailure password policy attribute for details), and the pwdLockout password policy attribute is set
to "TRUE", the account may be locked. (Please also refer to the pwdLockout password policy attribute.)
Excess timestamps beyond those allowed by pwdMaxFailure or pwdMaxRecordedFailure may also be purged. If
a successful authentication is made to this DN (i.e. to this user account), then pwdFailureTime will be
cleansed of entries.
( 1.3.6.1.4.1.42.2.27.8.1.19
NAME 'pwdFailureTime'
DESC 'The timestamps of the last consecutive
authentication failures'
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
EQUALITY generalizedTimeMatch
ORDERING generalizedTimeOrderingMatch
NO-USER-MODIFICATION
USAGE directoryOperation )
pwdHistory
This attribute contains the history of previously used passwords for this DN (i.e. for this user
account). The values of this attribute are stored in string format as follows:
pwdHistory=
time "#" syntaxOID "#" length "#" data
time=
GeneralizedTime as specified in section 3.3.13 of [RFC4517]
syntaxOID = numericoid
This is the string representation of the dotted-decimal OID that defines the syntax used to store
the password. numericoid is described in section 1.4 of [RFC4512].
length = NumericString
The number of octets in the data. NumericString is described in section 3.3.23 of [RFC4517].
data =
Octets representing the password in the format specified by syntaxOID.
This format allows the server to store and transmit a history of passwords that have been used. In order
for equality matching on the values in this attribute to function properly, the time field is in GMT
format.
( 1.3.6.1.4.1.42.2.27.8.1.20
NAME 'pwdHistory'
DESC 'The history of user passwords'
SYNTAX 1.3.6.1.4.1.1466.115.121.1.40
EQUALITY octetStringMatch
NO-USER-MODIFICATION
USAGE directoryOperation)
pwdGraceUseTime
This attribute contains the list of timestamps of logins made after the user password in the DN has
expired. These post-expiration logins are known as "grace logins". If too many grace logins have been
used (please refer to the pwdGraceAuthnLimit password policy attribute), then the DN will no longer be
allowed to be used to authenticate the user to the directory until the administrator changes the DN's
userPassword attribute.
( 1.3.6.1.4.1.42.2.27.8.1.21
NAME 'pwdGraceUseTime'
DESC 'The timestamps of the grace login once the password has expired'
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
EQUALITY generalizedTimeMatch
NO-USER-MODIFICATION
USAGE directoryOperation)
pwdReset
This attribute indicates whether the user's password has been reset by the administrator and thus must be
changed upon first use of this DN for authentication to the directory. If pwdReset is set to "TRUE",
then the password was reset and the user must change it upon first authentication. If the attribute does
not exist, or is set to "FALSE", the user need not change their password due to administrative reset.
( 1.3.6.1.4.1.42.2.27.8.1.22
NAME 'pwdReset'
DESC 'The indication that the password has
been reset'
EQUALITY booleanMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
SINGLE-VALUE
USAGE directoryOperation)
pwdStartTime
This attribute specifies the time the entry's password becomes valid for authentication. Authentication
attempts made before this time will fail. If this attribute does not exist, then no restriction applies.
( 1.3.6.1.4.1.42.2.27.8.1.27
NAME 'pwdStartTime'
DESC 'The time the password becomes enabled'
EQUALITY generalizedTimeMatch
ORDERING generalizedTimeOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
SINGLE-VALUE
USAGE directoryOperation )
pwdEndTime
This attribute specifies the time the entry's password becomes invalid for authentication.
Authentication attempts made after this time will fail, regardless of expiration or grace settings. If
this attribute does not exist, then this restriction does not apply.
( 1.3.6.1.4.1.42.2.27.8.1.28
NAME 'pwdEndTime'
DESC 'The time the password becomes disabled'
EQUALITY generalizedTimeMatch
ORDERING generalizedTimeOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
SINGLE-VALUE
USAGE directoryOperation )
Note that pwdStartTime may be set to a time greater than or equal to pwdEndTime; this simply disables the
account.
pwdAccountTmpLockoutEnd
This attribute that the user's password has been locked out temporarily according to the pwdMinDelay
policy option and when the lockout ends.
( 1.3.6.1.4.1.42.2.27.8.1.33
NAME 'pwdAccountTmpLockoutEnd'
DESC 'Temporary lockout end'
EQUALITY generalizedTimeMatch
ORDERING generalizedTimeOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24
SINGLE-VALUE
NO-USER-MODIFICATION
USAGE directoryOperation )
SUNDS ACCOUNT USABILITY CONTROL
If the SunDS Account Usability control is used with a search request, the overlay will attach validity
information to each entry provided all of the following are met:
• There is a password policy that applies to the entry
• The user has compare access to the entry's password attribute.
• The configured password attribute is present in the entry
EXAMPLES
database mdb
suffix dc=example,dc=com
...
overlay ppolicy
ppolicy_default "cn=Standard,ou=Policies,dc=example,dc=com"
SEE ALSO
ldap(3), slapd.conf(5), slapd-config(5), slapo-chain(5).
"OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
IETF LDAP password policy proposal by P. Behera, L. Poitou and J. Sermersheim: documented in IETF
document "draft-behera-ldap-password-policy-10.txt".
BUGS
The LDAP Password Policy specification is not yet an approved standard, and it is still evolving. This
code will continue to be in flux until the specification is finalized.
ACKNOWLEDGEMENTS
This module was written in 2004 by Howard Chu of Symas Corporation with significant input from Neil
Dunbar and Kartik Subbarao of Hewlett-Packard.
This manual page borrows heavily and shamelessly from the specification upon which the password policy
module it describes is based. This source is the IETF LDAP password policy proposal by P. Behera, L.
Poitou and J. Sermersheim. The proposal is fully documented in the IETF document named draft-behera-
ldap-password-policy-10.txt, written in August of 2009.
OpenLDAP Software is developed and maintained by The OpenLDAP Project <http://www.openldap.org/>.
OpenLDAP Software is derived from the University of Michigan LDAP 3.3 Release.