Provided by: corosync_3.1.7-1ubuntu3_amd64 
NAME
cmap_keys - Overview of keys stored in the Configuration Map
OVERVIEW
There are 3 main types of keys stored in CMAP:
* Mapping of values stored in the config file.
* Runtime statistics.
* Other user created values.
In this man page, wild-cards have the usual meaning.
ICMAP KEYS
These keys are in the icmap (default) map
internal_configuration.*
Internal configuration data. All keys in this prefix are read only. It's only
useful for getting a list of loaded services.
logging.*
Values read from the configuration file. It's possible to change them at runtime.
If subsystem specific configuration is needed, the key must be in the form
logging.logger_subsys.SERVICE.key, where SERVICE is upper case name of the service
and key is same as in the configuration file. All values are of string type.
nodelist.*
Values are read from the configuration file only (dynamic updates are not allowed).
Each node element in the configuration file gets assigned its position starting
from zero. So the first node from the config file has nodelist.node.0. prefix. To
be a valid entry, each node must have ring0_addr key. To change the nodeid key,
use a u32 data type.
Local node position is stored in local_node_pos key (RO), so it's easy to find out
nodeid/ring addresses of the local node directly from cmap.
runtime.blackbox.*
Trigger keys for storing fplay data. It's recommended that you use the corosync-
blackbox command to change keys in this prefix.
runtime.force_gather
Set to 'yes' to force the processor to move into the GATHER state. This operation
is dangerous and is not recommended.
runtime.config.*
Contains the values actually in use by the totem membership protocol. Values here
are either taken from the Corosync configuration file, defaults or computed from
entries in the config file. For information on individual keys please refer to the
man page corosync.conf(5).
runtime.services.*
Prefix with statistics for service engines. Each service has its own service_id key
in the prefix with the name runtime.services.SERVICE., where SERVICE is the lower
case name of the service. Inside the service prefix is the number of messages
received and sent by the corosync engine in the format
runtime.services.SERVICE.EXEC_CALL.rx and runtime.services.SERVICE.EXEC_CALL.tx,
where EXEC_CALL is the internal id of the service call (so for example 3 in cpg
service is receive of multicast message from other nodes).
runtime.totem.members.*
Prefix containing members of the totem single ring protocol. Each member keys has
format runtime.totem.members.NODEID.KEY, where key is one of:
config_version Config version of the member node.
resources.process.PID.*
Prefix created by applications using SAM with CMAP integration. It contains the
following keys:
recovery Recovery policy of the process. Can be one of quit or restart.
poll_period Value passed in sam_initialize as a time_interval.
last_updated Last time SAM received a heartbeat from the client.
state State of the client. Can be one of failed, stopped, running and waiting for
quorum.
uidgid.*
Information about users/groups which are allowed to make IPC connections to
corosync. Entries loaded from configuration file are stored with uidgid.config.*
prefix and are pruned on configuration file reload. Dynamic entries has uidgid.*
prefix and a configuration file reload doesn't affect them.
quorum.cancel_wait_for_all
Tells votequorum to cancel waiting for all nodes at cluster startup. Can be used to
unblock quorum if notes are known to be down. For pcs use only.
cfg.shutdown_timeout
Sets the timeout within which daemons that are registered for cfg callbacks must
respond to a corosync_cfg_try_shutdown() request. the default is 5000 mS
config.reload_in_progress
This value will be set to 1 (or created) when a corosync.conf reload is started,
and set to 0 when the reload is completed. This allows interested subsystems to do
atomic reconfiguration rather than changing each key. Note that individual
add/change/delete notifications will still be sent during a reload.
config.totemconfig_reload_in_progress
This key is similar to config.totemconfig_reload_in_progress but changed after the
totem config trigger is processed. It is useful (mainly) for situations when
nodelist.local_node_pos must be correctly reinstated before anything else.
STATS KEYS
These keys are in the stats map. All keys in this map are read-only. Modification
tracking of individual keys is supported in the stats map, but not prefixes. Add/Delete
operations are supported on prefixes though so you can track for new ipc connections or
knet interfaces.
stats.srp.*
Prefix containing statistics about totem. Typical key prefixes:
commit_entered Number of times the processor entered COMMIT state.
commit_token_lost Number of times the processor lost token in COMMIT state.
consensus_timeouts How many times the processor timed out forming a consensus about
membership.
continuous_gather How many times the processor was not able to reach consensus.
firewall_enabled_or_nic_failure Set to 1 when processor was not able to reach
consensus for long time. The usual reason is a badly configured firewall or
connection failure.
gather_entered Number of times the processor entered GATHER state.
gather_token_lost Number of times the processor lost token in GATHER state.
mcast_retx Number of retransmitted messages.
mcast_rx Number of received multicast messages.
mcast_tx Number of transmitted multicast messages.
memb_commit_token_rx Number of received commit tokens.
memb_commit_token_tx Number of transmitted commit tokens.
memb_join_rx Number of received join messages.
memb_join_tx Number of transmitted join messages.
memb_merge_detect_rx Number of received member merge messages.
memb_merge_detect_tx Number of transmitted member merge messages.
orf_token_rx Number of received orf tokens.
orf_token_tx Number of transmitted orf tokens.
recovery_entered Number of times the processor entered recovery.
recovery_token_lost Number of times the token was lost in recovery state.
rx_msg_dropped Number of received messages which were dropped because they were not
expected (as example multicast message in commit state).
token_hold_cancel_rx Number of received token hold cancel messages.
token_hold_cancel_tx Number of transmitted token hold cancel messages.
mtt_rx_token Mean transit time of token in milliseconds. In other words, time
between two consecutive token receives.
avg_token_workload Average time in milliseconds of holding time of token on the
current processor.
avg_backlog_calc Average number of not yet sent messages on the current processor.
stats.knet.nodeX.linkY.*
Statistics about the network traffic to and from each node and link when using tke
kronosnet transport
connected Whether the link is connected or not
up_count Number of times this link has changed state to UP
down_count Number of times this link has changed state to DOWN
latency_ave / latency_max / latency_max Calculated latencies of this link. Note
that if there has been no traffic on the link then latency_min will show a very
large number.
latency_samples The number of samples used to calculate the latency figures, so you
have some idea of their precision.
rx_data_packets / tx_data_packets The number of packets sent/received on this link
rx_data_bytes / tx_data_bytes The number of bytes sent/received on this link
rx_pmtu_packets / tx_pmtu_packets The number of packets sent/received by the PMTUd
subsystem
rx_pmtu_bytes / tx_pmtu_bytes The number of bytes sent/received by the PMTUd
subsystem
rx_ping_packets / tx_ping_packets The number of packets sent/received as pings
rx_ping_bytes / tx_ping_bytes The number of bytes sent/received as pings
rx_pong_packets / tx_pong_packets The number of packets sent/received as pongs
rx_pong_bytes / tx_pong_bytes The number of bytes sent/received as pongs
rx_total_packets / tx_total_packets The total number of packets sent/received. The
aggregate of all of the above packet stats
rx_total_bytes / tx_total_bytes The total number of bytes sent/received. The
aggregate of all of the above bytes stats
tx_data_retries / tx_pmtu_retries / tx_ping_retries / tx_pong_retries /
tx_total_retries Number of times a transmit operation had to be retried due to the
socket returning EAGAIN
stats.ipcs.*
There is information about total number of active connections from client programs
at the time the request was made. active number of closed connections during whole
runtime of corosync closed Total number of connections that have been made since
corosync was started
stats.ipcs.ID.*
Each IPC connection has a unique ID. This is in the form
[[serviceX:][PID:]internal_id.
Typical keys in this prefix are:
proc_name process name of connected process (unavailable on some platforms)
dispatched number of dispatched messages.
invalid_request number of requests made by IPC which are invalid (calling non-
existing call, ...).
name contains short name of the IPC connection (unavailable on some platforms).
overload is number of requests which were not processed because of overload.
queue_size contains the number of messages in the queue waiting for send.
recv_retries is the total number of interrupted receives.
requests contains the number of requests made by IPC.
responses is the number of responses sent to the IPC client.
send_retries contains the total number of interrupted sends.
service_id contains the ID of service which the IPC is connected to.
stats.schedmiss.<n>.*
If corosync is not scheduled after the required period of time it will log this
event and also write an entry to the stats cmap under this key. There can be up to
10 entries (0..9) in here, when an 11th event happens the earliest will be removed.
These events will always be in reverse order, so stats.schedmiss.0.* will always be
the latest event kept and 9 the oldest. If you want to listen for notifications
then you are recommended to listen for changes to stats.schedmiss.0.timestamp or
stats.schedmiss.0.delay.
timestamp The time of the event in ms since the Epoch (ie time_t * 1000 but with
valid milliseconds).
delay The time that corosync was paused (in ms, float value).
stats.clear.*
These are write-only keys used to clear the stats for various subsystems
totem Clears the pg & srp totem stats.
knet Clears the knet stats
ipc Clears the ipc stats
schedmiss Clears the schedmiss stats
all Clears all of the above stats
DYNAMIC CHANGE USER/GROUP PERMISSION TO USE COROSYNC IPC
Is the same as in the configuration file. eg: to add UID 500 use
# corosync-cmapctl -s uidgid.uid.500 u8 1
GID is similar, so to add a GID use
# corosync-cmapctl -s uidgid.gid.500 u8 1
For removal of permissions, simply delete the key
# corosync-cmapctl -d uidgid.gid.500
SEE ALSO
corosync_overview(7), corosync.conf(5), corosync-cmapctl(8)