Provided by: cpl-plugin-muse-doc_2.8.7+dfsg-3_all 
NAME
muse_lsf - Compute the LSF
SYNOPSIS
esorex muse_lsf [OPTIONS] FILE.sof
DESCRIPTION
Compute the slice and wavelength dependent LSF from a lines spectrum (ARC lamp).
OPTIONS
--nifu <int>
IFU to handle. If set to 0, all IFUs are processed serially. If set to -1, all IFUs are processed
in parallel. (int; default: 0). The full name of this option for the EsoRex configuration file is
muse.muse_lsf.nifu [default = 0].
--overscan <str>
If this is "none", stop when detecting discrepant overscan levels (see ovscsigma), for "offset" it
assumes that the mean overscan level represents the real offset in the bias levels of the
exposures involved, and adjusts the data accordingly; for "vpoly", a polynomial is fit to the
vertical overscan and subtracted from the whole quadrant. (str; default: ´vpoly´). The full name
of this option for the EsoRex configuration file is muse.muse_lsf.overscan [default = vpoly].
--ovscreject <str>
This influences how values are rejected when computing overscan statistics. Either no rejection at
all ("none"), rejection using the DCR algorithm ("dcr"), or rejection using an iterative constant
fit ("fit"). (str; default: ´dcr´). The full name of this option for the EsoRex configuration file
is muse.muse_lsf.ovscreject [default = dcr].
--ovscsigma <float>
If the deviation of mean overscan levels between a raw input image and the reference image is
higher than |ovscsigma x stdev|, stop the processing. If overscan="vpoly", this is used as sigma
rejection level for the iterative polynomial fit (the level comparison is then done afterwards
with |100 x stdev| to guard against incompatible settings). Has no effect for overscan="offset".
(float; default: 30.0). The full name of this option for the EsoRex configuration file is
muse.muse_lsf.ovscsigma [default = 30.0].
--ovscignore <int>
The number of pixels of the overscan adjacent to the data section of the CCD that are ignored when
computing statistics or fits. (int; default: 3). The full name of this option for the EsoRex
configuration file is muse.muse_lsf.ovscignore [default = 3].
--save_subtracted <bool>
Save the pixel table after the LSF subtraction. (bool; default: False). The full name of this
option for the EsoRex configuration file is muse.muse_lsf.save_subtracted [default = False].
--line_quality <int>
Minimal quality flag in line catalog for selection (int; default: 3). The full name of this option
for the EsoRex configuration file is muse.muse_lsf.line_quality [default = 3].
--lsf_range <float>
Wavelength window (half size) around each line to estimate LSF (float; default: 7.5). The full
name of this option for the EsoRex configuration file is muse.muse_lsf.lsf_range [default = 7.5].
--lsf_size <int>
Image size in LSF direction (int; default: 150). The full name of this option for the EsoRex
configuration file is muse.muse_lsf.lsf_size [default = 150].
--lambda_size <int>
Image size in line wavelength direction (int; default: 30). The full name of this option for the
EsoRex configuration file is muse.muse_lsf.lambda_size [default = 30].
--lsf_regression_window <float>
Size of the regression window in LSF direction (float; default: 0.7). The full name of this option
for the EsoRex configuration file is muse.muse_lsf.lsf_regression_window [default = 0.7].
--merge <bool>
Merge output products from different IFUs into a common file. (bool; default: False). The full
name of this option for the EsoRex configuration file is muse.muse_lsf.merge [default = False].
--combine <str>
Type of lampwise image combination to use. (str; default: ´sigclip´). The full name of this option
for the EsoRex configuration file is muse.muse_lsf.combine [default = sigclip].
--method <str>
LSF generation method. Depending on this value, either an interpolated LSF cube is created, or a
table with the parameters of a hermitean gaussian. (str; default: ´interpolate´). The full name of
this option for the EsoRex configuration file is muse.muse_lsf.method [default = interpolate].
Note that it is possible to create a configuration file containing these options, along with suitable
default values. Please refer to the details provided by the 'esorex --help' command.
SEE ALSO
The full documentation for the muse pipeline can be downloaded as a PDF file using the following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/muse/muse-pipeline-cookbook-2.8.7.pdf
An overview over the existing ESO pipelines can be found on the web page
https://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See
https://packages.python.org/python-cpl/index.html for further information.
The other recipes of the muse pipeline are muse_ampl(7), muse_astrometry(7), muse_bias(7),
muse_create_sky(7), muse_dark(7), muse_exp_align(7), muse_exp_combine(7), muse_flat(7), muse_geometry(7),
muse_illum(7), muse_lingain(7), muse_qi_mask(7), muse_scibasic(7), muse_scipost(7),
muse_scipost_apply_astrometry(7), muse_scipost_calibrate_flux(7), muse_scipost_combine_pixtables(7),
muse_scipost_correct_dar(7), muse_scipost_correct_rv(7), muse_scipost_make_cube(7),
muse_scipost_raman(7), muse_scipost_subtract_sky(7), muse_scipost_subtract_sky_simple(7),
muse_standard(7), muse_twilight(7), muse_wavecal(7)
VERSION
muse_lsf 2.8.7
AUTHOR
Ole Streicher <https://support.eso.org>
BUG REPORTS
Please report any problems to https://support.eso.org. Alternatively, you may send a report to the ESO
User Support Department <usd-help@eso.org>.
LICENSE
This file is part of the MUSE Instrument Pipeline Copyright (C) 2005, 2019 European Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write
to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02111-1307 USA