Provided by: cpl-plugin-visir-doc_4.4.2+dfsg-1_all 
NAME
visir_old_spc_phot_ech - Old DRS detector: Sensitivity computation in echelle spectroscopy
SYNOPSIS
esorex visir_old_spc_phot_ech [OPTIONS] FILE.sof
DESCRIPTION
This recipe estimates the dispersion relation using the atmospheric spectrum in a echelle
spectroscopy half-cycle frame.
It also extracts the spectrum of an observed object using a combined frame.
Lastly, it computes the spectral photometry of an observed standard star.
The files listed in the Set Of Frames (sof-file) must be tagged:
VISIR-Echelle-Spectroscopy-file.fits SPEC_CAL_PHOT_HRG
VISIR-Quantum-Efficiency-Calibration-file.fits SPEC_CAL_QEFF
VISIR-Atmospheric-Emission-Lines-Calibration-file.fits SPEC_CAL_LINES
VISIR-Spectroscopic-Standard-Star-Catalog.fits SPEC_STD_CATALOG
Additionally, a bad pixel map with a PRO.CATG of SPEC_BPM may be added to the Set Of
Frames with tag: BPM.
OPTIONS
--nod <str>
An optional ASCII specification of the nodding positions (in case they are missing
from the FITS-file). The file must consist of one line per input FITS-file and each
line must consist of an integer (which is ignored) followed by a 0 or 1 (to
indicate object or sky). (str; default: ´NONE´). The full name of this option for
the EsoRex configuration file is visir.visir_old_spc_phot_ech.nodding [default =
NONE].
--auto_bpm <bool>
Automatic detection and correction of bad pixels (bool; default: True). The full
name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.auto_bpm [default = True].
--g <bool>
Automatic filtering of glitches (bool; default: False). The full name of this
option for the EsoRex configuration file is visir.visir_old_spc_phot_ech.rem_glitch
[default = False].
--p <bool>
Automatic purging of half-cycle images whose median deviates more than a factor
three from the mean of the medians of half-cycle images or whose standard deviation
deviates more than a factor three from the mean of their standard deviations (bool;
default: False). The full name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.purge_bad [default = False].
--union <bool>
Combine images using their union, as opposed to their intersection (deprecated and
ignored, see --combine_method) (bool; default: True). The full name of this option
for the EsoRex configuration file is visir.visir_old_spc_phot_ech.union [default =
True].
--rej <str>
Each resulting pixel is the average of the corresponding (interpolated) pixel value
in each jittered image. A positive value, n1, for the first of the two integers
specifies that for each pixel the smallest n1 pixel values shall be ignored in the
averaging. Similarly, a positive value, n2, for the second of the two integers
specifies that for each pixel the largest n2 pixel values shall be ignored in the
averaging. (str; default: ´0-0´). The full name of this option for the EsoRex
configuration file is visir.visir_old_spc_phot_ech.rej [default = 0-0].
--plot <int>
The recipe can produce a number of predefined plots. Zero means that none of the
plots are produced, while increasing values (e.g. 1 or 2) increases the number of
plots produced. If the plotting fails a warning is produced, and the recipe
continues. The default behaviour of the plotting is to use gnuplot (with option
-persist). The recipe currently produces 1D-plots using gnuplot commands. The
recipe user can control the actual plotting-command used by the recipe to create
the plot by setting the environment variable CPL_PLOTTER. Currently, if CPL_PLOTTER
is set it must contain the string ´gnuplot´. Setting it to ´cat >
my_gnuplot_$$.txt´ causes a number of ASCII-files to be created, which each produce
a plot when given as standard input to gnuplot (e.g. later or on a different
computer). A finer control of the plotting options can be obtained by writing an
executable script, e.g. my_gnuplot.pl, that executes gnuplot after setting the
desired gnuplot options (e.g. set terminal pslatex color) and then setting
CPL_PLOTTER to my_gnuplot.pl. The predefined plots include plotting of images.
Images can be plotted not only with gnuplot, but also using the pnm format. This is
controlled with the environment variable CPL_IMAGER. If CPL_IMAGER is set to a
string that does not contain the word gnuplot, the recipe will generate the plot in
pnm format. E.g. setting CPL_IMAGER to ´display - &´ will produce a gray-scale
image using the image viewer display. (int; default: 0). The full name of this
option for the EsoRex configuration file is visir.visir_old_spc_phot_ech.plot
[default = 0].
--slit_skew <float>
Distortion correction: Skew of slit (degrees) (clockwise) (float; default: 0.0).
The full name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.phi [default = 0.0].
--spectrum_skew <float>
Distortion correction: LMR Skew of spectrum (degrees) (counter- clockwise). Not
used in High Resolution (float; default: 0.0). The full name of this option for the
EsoRex configuration file is visir.visir_old_spc_phot_ech.ksi [default = 0.0].
--vert_arc <float>
Distortion correction: LR Detector vertical curvature (pixel). Reduced by a factor
4 in MR. Not used in HR A-side. Increased by a factor 115/52 in HR B-side (float;
default: 0.0). The full name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.eps [default = 0.0].
--hori_arc <float>
Distortion correction: LMR Detector horizontal curvature (pixel). Increased by a
factor 1.5 in HR A-side. Reduced by a factor 2 in HR B-side (float; default: 0.0).
The full name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.delta [default = 0.0].
--orderoffset <int>
Echelle order offset. The offset is relative to the main order. The allowed range
of offsets depend on the selected grism. The offset can never exceed +/-4. If the
main order is e.g. 8 an order offset of +1 will cause the recipe to base the data
reduction on order 9. With a positive order offset the central wavelength becomes
smaller while for a negative order offset the central wavelength becomes larger.
(int; default: 0). The full name of this option for the EsoRex configuration file
is visir.visir_old_spc_phot_ech.orderoffset [default = 0].
--off <str>
An optional ASCII specification of the offsets in case those in FITS- headers are
missing or wrong. The file must consist of one line per input pair of FITS-files,
and each line must consist of two numbers which represent the shift in pixels of
that image relative to the first image. The first line should thus comprise two
zeros. Correct FITS-header offsets mean that the i´th X offset can be gotten from
Xoffset_0 - Xoffset_i, where Xoffset_i is the value of ESO SEQ CUMOFFSETX and
likewise for Y. (str; default: ´NONE´). The full name of this option for the EsoRex
configuration file is visir.visir_old_spc_phot_ech.offsets [default = NONE].
--ref <bool>
User-defined refining of the image offsets. See options objs and xcorr (bool;
default: False). The full name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.refine [default = False].
--objs <str>
The shift and add of images needs anchor points that typically are bright objects.
These are normally detected automatically but with user-defined refining of offsets
enabled, they must be provided by the user through an ASCII file containing one
line per anchor point with each line consisting of its x and y coordinate (in
pixels). This file is ignored with user-defined refining of offsets disabled. (str;
default: ´NONE´). The full name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.objects [default = NONE].
--xcorr <str>
If user-defined refining of offsets is enabled a cross-correlation of the images is
performed. In order to speed up this process, this cross-correlation is performed
only on smaller rectangles around the anchor points. The first two parameters is
the half-size of this rectangle in pixels. The second pair is the maximum shift in
x and y (pixels) evaluated by the cross-correlation on the rectangle. Used only if
user-defined refining of offsets is enabled. (str; default: ´10-10-25-25´). The
full name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.xcorr [default = 10-10-25-25].
--fixcombi <bool>
Perform the distortion correction on the combined image, and not on each of the
jittered images. This will reduce excution time and degrade the quality of the
combined image (bool; default: False). The full name of this option for the EsoRex
configuration file is visir.visir_old_spc_phot_ech.fixcombi [default = False].
--emis_tol <float>
The computation of the mean and standard deviation of the sensitivity is done for
wavelengths with an atmospheric emissivity of at most emis_min + emis_tol *
(emis_max - emis_min), where emis_min is the minimum emissivity in the observed
wavelength range and emis_max is the ditto maximum. Thus emis_tol = 1 means that
all wavelengths are included. (float; default: 1.0). The full name of this option
for the EsoRex configuration file is visir.visir_old_spc_phot_ech.emis_tol [default
= 1.0].
--destripe_iterations <int>
Max number of destriping iterations (0 to disable destriping). Horizontal
destriping is done first and if no horizontal striping is detected, vertical
destriping is performed (int; default: 15). The full name of this option for the
EsoRex configuration file is visir.visir_old_spc_phot_ech.nstripe [default = 15].
--destripe_morpho <bool>
Destripe with morphological cleaning (bool; default: False). The full name of this
option for the EsoRex configuration file is visir.visir_old_spc_phot_ech.mstripe
[default = False].
--rl <int>
Reject leftmost columns in spectrum extraction, zero means all columns on the left
are used. In cross-dispersion mode a (small) negative number may be used (pixel)
(int; default: 0). The full name of this option for the EsoRex configuration file
is visir.visir_old_spc_phot_ech.reject_left [default = 0].
--rr <int>
Reject rightmost columns in spectrum extraction, zero means all columns on the
right are used. In cross-dispersion mode a (small) negative number may be used
(pixel) (int; default: 0). The full name of this option for the EsoRex
configuration file is visir.visir_old_spc_phot_ech.reject_right [default = 0].
--ro_noise <float>
Readout noise of the detector (float; default: 14.5). The full name of this option
for the EsoRex configuration file is visir.visir_old_spc_phot_ech.ron [default =
14.5].
--ox_sigma <float>
Sigma to use for clipping in optimal extraction (float; default: 5.0). The full
name of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.optex_sigma [default = 5.0].
--ox_niters <int>
Number of optimal extraction iterations to perform (int; default: 2). The full name
of this option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.optex_niters [default = 2].
--ox_smooth <int>
Width of smoothing window to use along spectral dimension during optimal
extraction. A median filter is used. (int; default: 31). The full name of this
option for the EsoRex configuration file is
visir.visir_old_spc_phot_ech.optex_smooth [default = 31].
--gain <float>
Detector gain (float; default: 0.75). The full name of this option for the EsoRex
configuration file is visir.visir_old_spc_phot_ech.gain [default = 0.75].
--ox_kernel <int>
Size of square smoothing kernel, in pixels, to apply to science frame before
optimal extraction (ignored during aperture extraction). A median filter is used.
(int; default: 3). The full name of this option for the EsoRex configuration file
is visir.visir_old_spc_phot_ech.optex_kernel [default = 3].
Note that it is possible to create a configuration file containing these options, along
with suitable default values. Please refer to the details provided by the 'esorex --help'
command.
SEE ALSO
The full documentation for the visir pipeline can be downloaded as a PDF file using the
following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/visir/visir-pipeline-manual-1.4.pdf
An overview over the existing ESO pipelines can be found on the web page
https://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See
https://packages.python.org/python-cpl/index.html for further information.
The other recipes of the visir pipeline are visir_img_dark(7), visir_img_ff(7),
visir_img_reduce(7), visir_img_trans(7), visir_old_img_combine(7), visir_old_img_phot(7),
visir_old_spc_obs(7), visir_old_spc_obs_ech(7), visir_old_spc_phot(7),
visir_old_spc_wcal(7), visir_old_spc_wcal_ech(7), visir_old_util_destripe(7),
visir_spc_reduce(7), visir_util_apply_calib(7), visir_util_clip(7),
visir_util_convert_weight(7), visir_util_detect_shift(7), visir_util_img_std_cat(7),
visir_util_join(7), visir_util_qc(7), visir_util_repack(7), visir_util_run_swarp(7),
visir_util_spc_std_cat(7), visir_util_spc_txt2fits(7), visir_util_undistort(7)
VERSION
visir_old_spc_phot_ech 4.4.2
AUTHOR
Lars Lundin <https://support.eso.org>
BUG REPORTS
Please report any problems to https://support.eso.org. Alternatively, you may send a
report to the ESO User Support Department <usd-help@eso.org>.
LICENSE
This file is part of the VISIR Instrument Pipeline Copyright (C) 2004, 2005 European
Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
MA 02111-1307 USA