Ubuntu Manpage: adcli - Tool for performing actions on an Active Directory domain

NAME

       adcli - Tool for performing actions on an Active Directory domain

SYNOPSIS

       adcli info domain.example.com

       adcli join domain.example.com

       adcli update

       adcli testjoin

       adcli create-user [--domain=domain.example.com] user

       adcli delete-user [--domain=domain.example.com] user

       adcli passwd-user [--domain=domain.example.com] user

       adcli create-group [--domain=domain.example.com] user

       adcli delete-group [--domain=domain.example.com] user

       adcli add-member [--domain=domain.example.com] group user or computer...

       adcli remove-member [--domain=domain.example.com] group user...

       adcli preset-computer [--domain=domain.example.com] computer...

       adcli reset-computer [--domain=domain.example.com] computer

       adcli delete-computer [--domain=domain.example.com] computer

       adcli show-computer [--domain=domain.example.com] computer

       adcli create-msa [--domain=domain.example.com]

GENERAL OVERVIEW

adcli is a command line tool that can perform actions in an Active Directory domain. Among
other things it can be used to join a computer to a domain.

See the various sub commands below. The following global options can be used:

-D, --domain=domain
The domain to connect to. If a domain is not specified, then the domain part of the
local computer's host name is used.

-R, --domain-realm=REALM
Kerberos realm for the domain. If not specified, then the upper cased domain name is
used.

-S, --domain-controller=server
Connect to a specific domain controller. If not specified, then an appropriate domain
controller is automatically discovered.

--use-ldaps
Connect to the domain controller with LDAPS. By default the LDAP port is used and SASL
GSS-SPNEGO or GSSAPI is used for authentication and to establish encryption. This
should satisfy all requirements set on the server side and LDAPS should only be used
if the LDAP port is not accessible due to firewalls or other reasons.

Please note that the place where CA certificates can be found to validate the AD DC
certificates must be configured in the OpenLDAP configuration file, e.g.
/etc/ldap/ldap.conf. As an alternative it can be specified with the help of an
environment variable, e.g.

$ LDAPTLS_CACERT=/path/to/ad_dc_ca_cert.pem adcli join --use-ldaps -D domain.example.com
...

Please see ldap.conf(5) for details.

-C
Use the default Kerberos credential cache to authenticate with the domain.

--login-ccache[=ccache_name]
Use the specified Kerberos credential cache to authenticate with the domain. If no
credential cache is specified, the default Kerberos credential cache will be used.
Credential caches of type FILE can be given with the path to the file. For other
credential cache types, e.g. DIR, KEYRING or KCM, the type must be specified
explicitly together with a suitable identifier.

Please note that since the ccache_name is optional the =(equal) sign is mandatory. If
= is missing the parameter is treated as optionless extra argument. How this is
handled depends on the specific sub-command.

-U, --login-user=User
Use the specified user account to authenticate with the domain. If not specified, then
the name 'Administrator' will be used.

--no-password
Don't show prompts for or read a password from input.

-W, --prompt-password
Prompt for a password if necessary. This is the default.

--stdin-password
Read a password from stdin input instead of prompting for a password.

-v, --verbose
Run in verbose mode with debug output.

QUERYING DOMAIN INFORMATION

       adcli info displays discovered information about an Active Directory domain or an Active
       Directory domain controller.

           $ adcli info domain.example.com
           ...

           $ adcli info --domain-controller=dc.domain.example.com
           ...

       adcli info will output as much information as it can about the domain. The information is
       designed to be both machine and human readable. The command will exit with a non-zero exit
       code if the domain does not exist or cannot be reached.

       To show domain info for a specific domain controller use the --domain-controller option to
       specify which domain controller to query.

       Use the --verbose option to show details of how the domain is discovered and queried. Many
       of the global options, in particular authentication options, are not usable with the adcli
       info command.

JOINING THE LOCAL MACHINE TO A DOMAIN

adcli join creates a computer account in the domain for the local machine, and sets up a
keytab for the machine. It does not configure an authentication service (such as sssd).

$ adcli join domain.example.com
Password for Administrator:

In addition to the global options, you can specify the following options to control how
this operation is done.

-N, --computer-name=computer
The short non-dotted name of the computer account that will be created in the domain.
If not specified, then the first portion of the --host-fqdn is used.

-O, --domain-ou=OU=xxx
The full distinguished name of the OU in which to create the computer account. If not
specified, then the computer account will be created in a default location.

-H, --host-fqdn=host
Override the local machine's fully qualified domain name. If not specified, the local
machine's hostname will be retrieved via gethostname(). If gethostname() only returns
a short name getaddrinfo() with the AI_CANONNAME hint is called to expand the name to
a fully qualified domain name.

-K, --host-keytab=/path/to/keytab
Specify the path to the host keytab where host credentials will be written after a
successful join operation. If not specified, the default location will be used,
usually /etc/krb5.keytab.

--login-type={computer|user}
Specify the type of authentication that will be performed before creating the machine
account in the domain. If set to 'computer', then the computer must already have a
preset account in the domain. If not specified and none of the other --login-xxx
arguments have been specified, then will try both 'computer' and 'user'
authentication.

--os-name=name
Set the operating system name on the computer account. The default depends on where
adcli was built, but is usually something like 'linux-gnu'.

--os-service-pack=pack
Set the operating system service pack on the computer account. Not set by default.

--os-version=version
Set the operating system version on the computer account. Not set by default.

--description=description
Set the description attribute on the computer account. Not set by default.

--service-name=service
Additional service name for a Kerberos principal to be created on the computer
account. This option may be specified multiple times.

--user-principal=host/name@REALM
Set the userPrincipalName field of the computer account to this Kerberos principal. If
you omit the value for this option, then a principal will be set in the form of
host/host.example.com@REALM

--one-time-password
Specify a one time password for a preset computer account. This is equivalent to using
--login-type=computer and providing a password as input.

--trusted-for-delegation=yes|no|true|false
Set or unset the TRUSTED_FOR_DELEGATION flag in the userAccountControl attribute to
allow or not allow that Kerberos tickets can be forwarded to the host.

--dont-expire-password=yes|no|true|false
Set or unset the DONT_EXPIRE_PASSWORD flag in the userAccountControl attribute to
indicate if the machine account password should expire or not. By default adcli will
set this flag while joining the domain which corresponds to the default behavior of
Windows clients.

Please note that if the password will expire (--dont-expire-password=false) a renewal
mechanism has to be enabled on the client to not loose the connectivity to AD if the
password expires.

--add-service-principal=service/hostname
Add a service principal name. In contrast to the --service-name the hostname part can
be specified as well in case the service should be accessible with a different host
name as well.

--setattr=name=value
Add the LDAP attribute name with the given value to the new LDAP host object. This
option can be used multiple times to add multiple different attributes. Multi-value
attributes are currently not supported.

Please note that the account used to join the domain must have the required privileges
to add the given attributes. Some attributes might have constraints with respect to
syntax and allowed values which must be met as well. Attributes managed by other adcli
options cannot be set with this option.

--show-details
After a successful join print out information about join operation. This is output in
a format that should be both human and machine readable.

--show-password
After a successful join print out the computer machine account password. This is
output in a format that should be both human and machine readable.

--add-samba-data
After a successful join add the domain SID and the machine account password to the
Samba specific databases by calling Samba's net utility.

Please note that Samba's net requires some settings in smb.conf to create the database
entries correctly. Most important here is currently the workgroup option, see
smb.conf(5) for details.

--samba-data-tool=/path/to/net
If Samba's net cannot be found at /usr/bin/net, this option can be used to specific an
alternative location with the help of an absolute path.

--ldap-passwd
Use LDAP add/mod operations to set the machine account password instead of Kerberos.
This might help in some situations where Kerberos fails or is unreliable. But please
note that 'Change password' or 'Reset password' permissions or similar might be needed
to make the LDAP operation work. Additionally there will be no read-only domain
controller (RODC) support as there is with Kerberos.

If supported on the AD side the msDS-supportedEncryptionTypes attribute will be set as
well. Either the current value or the default list of AD's supported encryption types
filtered by the permitted encryption types of the client's Kerberos configuration are
written.

UPDATING THE MACHINE ACCOUNT PASSWORD AND OTHER ATTRIBUTES

adcli update updates the password of the computer account on the domain controller for the
local machine, write the new keys to the keytab and removes older keys. It keeps the
previous key on purpose because AD will need some time to replicate the new key to all DCs
hence the previous key might still be used.

$ adcli update

If used with a credential cache, other attributes of the computer account can be changed
as well if the principal has sufficient privileges.

$ kinit Administrator
$ adcli update --login-ccache=/tmp/krbcc_123

In addition to the global options, you can specify the following options to control how
this operation is done.

-N, --computer-name=computer
The short non-dotted name of the computer account that will be created in the domain.
If not specified, it will be retrieved from the keytab entries.

-H, --host-fqdn=host
The local machine's fully qualified domain name. If not specified, the local machine's
hostname will be retrieved from the keytab entries.

-K, --host-keytab=/path/to/keytab
Specify the path to the host keytab where current host credentials are stored and the
new ones will be written to. If not specified, the default location will be used,
usually /etc/krb5.keytab.

--os-name=name
Set the operating system name on the computer account. Not set by default.

--os-service-pack=pack
Set the operating system service pack on the computer account. Not set by default.

--os-version=version
Set the operating system version on the computer account. Not set by default.

--description=description
Set the description attribute on the computer account. Not set by default.

--service-name=service
Additional service name for a Kerberos principal to be created on the computer
account. This option may be specified multiple times.

--user-principal=host/name@REALM
Set the userPrincipalName field of the computer account to this Kerberos principal.

--computer-password-lifetime=lifetime
Only update the password of the computer account if it is older than the lifetime
given in days. By default the password is updated if it is older than 30 days.

--trusted-for-delegation=yes|no|true|false
Set or unset the TRUSTED_FOR_DELEGATION flag in the userAccountControl attribute to
allow or not allow that Kerberos tickets can be forwarded to the host.

Please note that if the password will expire (--dont-expire-password=false) a renewal
mechanism has to be enabled on the client to not loose the connectivity to AD if the
password expires.

--account-disable=yes|no|true|false
Set or unset the ACCOUNTDISABLE flag in the userAccountControl attribute to disable or
enable the computer account.

--remove-service-principal=service/hostname
Remove a service principal name from the keytab and the AD host object.

--setattr=name=value
Add the LDAP attribute name with the given value to the LDAP host object. This option
can be used multiple times to add multiple different attributes. Multi-value
attributes are currently not supported.

Please note that the account used to update the host object must have the required
privileges to modify the given attributes. Some attributes might have constraints with
respect to syntax and allowed values which must be met as well. Attributes managed by
other adcli options cannot be set with this option.

--delattr=name
Remove the LDAP attribute name from the LDAP host object. This option can be used
multiple times to remove multiple different attributes.

Please note that the account used to update the host object must have the required
privileges to delete the given attributes. Attributes managed by other adcli options
cannot be removed.

--show-details
After a successful join print out information about join operation. This is output in
a format that should be both human and machine readable.

--add-samba-data
After a successful join add the domain SID and the machine account password to the
Samba specific databases by calling Samba's net utility.

Please note that Samba's net requires some settings in smb.conf to create the database
entries correctly. Most important here is currently the workgroup option, see
smb.conf(5) for details.

Note that if the machine account password is not older than 30 days, you have to pass
--computer-password-lifetime=0 to force the update.

--samba-data-tool=/path/to/net
If Samba's net cannot be found at /usr/bin/net, this option can be used to specific an
alternative location with the help of an absolute path.

--ldap-passwd
Use LDAP add/mod operations to set the machine account password instead of Kerberos.
This might help in some situations where Kerberos fails or is unreliable. But please
note that 'Change password' or 'Rest password' permissions or similar might be needed
to make the LDAP operation work. Additionally there will be no read-only domain
controller (RODC) support as there is with Kerberos.

TESTING IF THE MACHINE ACCOUNT PASSWORD IS VALID

       adcli testjoin uses the current credentials in the keytab and tries to authenticate with
       the machine account to the AD domain. If this works the machine account password and the
       join are still valid. If it fails the machine account password or the whole machine
       account have to be refreshed with adcli join or adcli update.

           $ adcli testjoin

       Only the global options not related to authentication are available, additionally you can
       specify the following options to control how this operation is done.

       -K, --host-keytab=/path/to/keytab
           Specify the path to the host keytab where current host credentials are stored and the
           new ones will be written to. If not specified, the default location will be used,
           usually /etc/krb5.keytab.

CREATING A USER

adcli create-user creates a new user account in the domain.

$ adcli create-user Fry --domain=domain.example.com \
--display-name="Philip J. Fry" --mail=fry@domain.example.com

In addition to the global options, you can specify the following options to control how
the user is created.

--display-name="Name"
Set the displayName attribute of the new created user account.

-O, --domain-ou=OU=xxx
The full distinguished name of the OU in which to create the user account. If not
specified, then the computer account will be created in a default location.

--mail=email@domain.com
Set the mail attribute of the new created user account. This attribute may be
specified multiple times.

--unix-home=/home/user
Set the unixHomeDirectory attribute of the new created user account, which should be
an absolute path to the user's home directory.

--unix-gid=111
Set the gidNumber attribute of the new created user account, which should be the
user's numeric primary group id.

--unix-shell=/bin/shell
Set the loginShell attribute of the new created user account, which should be a path
to a valid shell.

--unix-uid=111
Set the uidNumber attribute of the new created user account, which should be the
user's numeric primary user id.

--nis-domain=nis_domain
Set the msSFU30NisDomain attribute of the new created user account, which should be
the user's NIS domain is the NIS/YP service of Active Directory's Services for Unix
(SFU) are used. This is needed to let the 'UNIX attributes' tab of older Active
Directory versions show the set UNIX specific attributes. If not specified adcli will
try to determine the NIS domain automatically if needed.

DELETING A USER

       adcli delete-user deletes a user account from the domain.

           $ adcli delete-user Fry --domain=domain.example.com

       The various global options can be used.

(RE)SETTING THE PASSWORD OF A USER WITH AN ADMINISTRATIVE ACCOUNT

       adcli passwd-user sets or resets the password of user account. The administrative account
       used for this operation must have privileges to set a password.

           $ adcli passwd-user Fry --domain=domain.example.com

       The various global options can be used.

CREATING A GROUP

       adcli create-group creates a new group in the domain.

           $ adcli create-group Pilots --domain=domain.example.com \
                --description="Group for all pilots"

       In addition to the global options, you can specify the following options to control how
       the group is created.

       --description="text"
           Set the description attribute of the new created group.

       -O, --domain-ou=OU=xxx
           The full distinguished name of the OU in which to create the group. If not specified,
           then the group will be created in a default location.

DELETING A GROUP

       adcli delete-group deletes a group from the domain.

           $ adcli delete-group Pilots --domain=domain.example.com

       The various global options can be used.

ADDING A MEMBER TO A GROUP

       adcli add-member adds one or more users to a group in the domain. The group is specified
       first, and then the various users or computers to be added. You must use dollar sign for
       computer account (computername$)

           $ adcli add-member --domain=domain.example.com Pilots Leela Scruffy
           $ adcli add-member --domain=domain.example.com servers srv-smb$

       The various global options can be used.

REMOVING A MEMBER FROM A GROUP

       adcli remove-member removes a user from a group in the domain. The group is specified
       first, and then the various users to be removed.

           $ adcli remove-member --domain=domain.example.com Pilots Scruffy

       The various global options can be used.

PRESET COMPUTER ACCOUNTS

adcli preset-computer pre-creates one or more computer accounts in the domain for machines
to later use when joining the domain. By doing this machines can join using a one time
password or automatically without a password.

$ adcli preset-computer --domain=domain.example.com \
host1.example.com host2
Password for Administrator:

If the computer names specified contain dots, then they are treated as fully qualified
host names, otherwise they are treated as short computer names. The computer accounts must
not already exist.

In addition to the global options, you can specify the following options to control how
this operation is done.

-O, --domain-ou=OU=xxx
The full distinguished name of the OU in which to create the computer accounts. If not
specified, then the computer account will be created in a default location.

--one-time-password
Specify a one time password to use when presetting the computer accounts. If not
specified, then a default password will be used, which allows for later automatic
joins.

--os-name=name
Set the operating system name on the computer account. The default depends on where
adcli was built, but is usually something like 'linux-gnu'.

--os-service-pack=pack
Set the operating system service pack on the computer account. Not set by default.

--os-version=version
Set the operating system version on the computer account. Not set by default.

--service-name=service
Additional service name for a Kerberos principal to be created on the computer
account. This option may be specified multiple times.

--user-principal
Set the userPrincipalName field of the computer account to this Kerberos principal in
the form of host/host.example.com@REALM

RESET COMPUTER ACCOUNT

       adcli reset-computer resets a computer account in the domain. If the appropriate machine
       is currently joined to the domain, then its membership will be broken. The account must
       already exist.

           $ adcli reset-computer --domain=domain.example.com host2

       If the computer names specified contain dots, then they are treated as fully qualified
       host names, otherwise they are treated as short computer names.

       In addition to the global options, you can specify the following options to control how
       this operation is done.

       --login-type={computer|user}
           Specify the type of authentication that will be performed before creating the machine
           account in the domain. If set to 'computer', then the computer must already have a
           preset account in the domain. If not specified and none of the other --login-xxx
           arguments have been specified, then will try both 'computer' and 'user'
           authentication.

DELETE COMPUTER ACCOUNT

       adcli delete-computer deletes a computer account in the domain. The account must already
       exist.

           $ adcli delete-computer --domain=domain.example.com host2
           Password for Administrator:

       If the computer name contains a dot, then it is treated as fully qualified host name,
       otherwise it is treated as short computer name.

       If no computer name is specified, then the host name of the computer adcli is running on
       is used, as returned by gethostname().

       The various global options can be used.

SHOW COMPUTER ACCOUNT ATTRIBUTES

       adcli show-computer show the computer account attributes stored in AD. The account must
       already exist.

           $ adcli show-computer --domain=domain.example.com host2
           Password for Administrator:

       If the computer name contains a dot, then it is treated as fully qualified host name,
       otherwise it is treated as short computer name.

       If no computer name is specified, then the host name of the computer adcli is running on
       is used, as returned by gethostname().

       The various global options can be used.

CREATE A MANAGED SERVICE ACCOUNT

adcli create-msa creates a managed service account (MSA) in the given Active Directory
domain. This is useful if a computer should not fully join the Active Directory domain but
LDAP access is needed. A typical use case is that the computer is already joined an Active
Directory domain and needs access to another Active Directory domain in the same or a
trusted forest where the host credentials from the joined Active Directory domain are not
valid, e.g. there is only a one-way trust.

$ adcli create-msa --domain=domain.example.com
Password for Administrator:

The managed service account, as maintained by adcli, cannot have additional service
principals names (SPNs) associated with it. An SPN is defined within the context of a
Kerberos service which is tied to a machine account in Active Directory. Since a machine
can be joined to a single Active Directory domain, managed service account in a different
Active Directory domain will not have the SPNs that otherwise are part of another Active
Directory domain's machine.

Since it is expected that a client will most probably join to the Active Directory domain
matching its DNS domain the managed service account will be needed for a different Active
Directory domain and as a result the Active Directory domain name is a mandatory option.
If called with no other options adcli create-msa will use the short hostname with an
additional random suffix as computer name to avoid name collisions.

LDAP attribute sAMAccountName has a limit of 20 characters. However, machine account's
NetBIOS name must be at most 16 characters long, including a trailing '$' sign. Since it
is not expected that the managed service accounts created by adcli will be used on the
NetBIOS level the remaining 4 characters can be used to add uniqueness. Managed service
account names will have a suffix of 3 random characters from number and upper- and
lowercase ASCII ranges appended to the chosen short host name, using '!' as a separator.
For a host with the shortname 'myhost', a managed service account will have a common name
(CN attribute) 'myhost!A2c' and a NetBIOS name (sAMAccountName attribute) will be
'myhost!A2c$'. A corresponding Kerberos principal in the Active Directory domain where the
managed service account was created would be 'myhost!A2c$@DOMAIN.EXAMPLE.COM'.

A keytab for the managed service account is stored into a file specified with -K option.
If it is not specified, the file is named after the default keytab file, with lowercase
Active Directory domain of the managed service account as a suffix. On most systems it
would be /etc/krb5.keytab with a suffix of 'domain.example.com', e.g.
/etc/krb5.keytab.domain.example.com.

adcli create-msa can be called multiple times to reset the password of the managed service
account. To identify the right account with the random component in the name the
corresponding principal is read from the keytab. If the keytab got deleted adcli will try
to identify an existing managed service account with the help of the fully-qualified name,
if this fails a new managed service account will be created.

The managed service account password can be updated with

$ adcli update --domain=domain.example.com --host-keytab=/etc/krb5.keytab.domain.example.com

and the managed service account can be deleted with

$ adcli delete-computer --domain=domain.example.com 'myhost!A2c'

In addition to the global options, you can specify the following options to control how
this operation is done.

-N, --computer-name=computer
The short non-dotted name of the managed service account that will be created in the
Active Directory domain. The long option name --computer-name is kept to underline the
similarity with the same option of the other sub-commands. If not specified, then the
first portion of the --host-fqdn or its default is used with a random suffix.

-O, --domain-ou=OU=xxx
The full distinguished name of the OU in which to create the managed service account.
If not specified, then the managed service account will be created in a default
location.

-H, --host-fqdn=host
Override the local machine's fully qualified DNS domain name. If not specified, the
local machine's hostname will be retrieved via gethostname(). If gethostname() only
returns a short name getaddrinfo() with the AI_CANONNAME hint is called to expand the
name to a fully qualified DNS domain name.

-K, --host-keytab=/path/to/keytab
Specify the path to the host keytab where credentials of the managed service account
will be written after a successful creation. If not specified, the default location
will be used, usually /etc/krb5.keytab with the lower-cased Active Directory domain
name added as a suffix e.g. /etc/krb5.keytab.domain.example.com.

--show-details
After a successful creation print out information about the created object. This is
output in a format that should be both human and machine readable.

--show-password
After a successful creation print out the managed service account password. This is
output in a format that should be both human and machine readable.

DELEGATED PERMISSIONS

       It is common practice in AD to not use an account from the Domain Administrators group to
       join a machine to a domain but use a dedicated account which only has permissions to join
       a machine to one or more OUs in the Active Directory tree. Giving the needed permissions
       to a single account or a group in Active Directory is called Delegation. A typical example
       on how to configured Delegation can be found in the Delegation section of the blog post
       Who can add workstation to the domain[1].

       When using an account with delegated permissions with adcli basically the same applies as
       well. However some aspects are explained here in a bit more details to better illustrate
       different concepts of Active Directory and to make it more easy to debug permissions
       issues during the join. Please note that the following is not specific to adcli but
       applies to all applications which would like to modify certain properties or objects in
       Active Directory with an account with limited permissions.

       First, as said in the blog post it is sufficient to have "Create computer object"
       permissions to join a computer to a domain. But this would only work as expected if the
       computer object does not exist in Active Directory before the join. Because only when a
       new object is created Active Directory does not apply additional permission checks on the
       attributes of the new computer object. This means the delegated user can add any kind of
       attribute with any value to a new computer object also long as they meet general
       constraints like e.g. that the attribute must be defined in the schema and is allowed in a
       objectclass of the object, the value must match the syntax defined in the schema or that
       the sAMAccountName must be unique in the domain.

       If you want to use the account with delegated permission to remove computer objects in
       Active Directory (adcli delete-computer) you should of course make sure that the account
       has "Delete computer object" permissions.

       If the computer object already exists the "Create computer object" permission does not
       apply anymore since now an existing object must be modified. Now permissions on the
       individual attributes are needed. e.g.  "Read and write Account Restrictions" or "Reset
       Password". For some attributes Active Directory has two types of permissions the plain
       "Read and Write" permissions and the "Validated Write" permissions. For the latter case
       there are two specific permissions relevant for adcli, namely

       •   Validated write to DNS host name

       •   Validated write to service principal name

       Details about the validation of the values can be found in the "Validated Writes" section
       of [MS-ADTS], especially dNSHostName[2] and servicePrincipalName[3]. To cut it short for
       "Validated write to DNS host name" the domain part of the fully-qualified hostname must
       either match the domain name of the domain you want to join to or must be listed in the
       msDS-AllowedDNSSuffixes attribute. And for "Validated write to service principal name" the
       hostname part of the service principal name must match the name stored in dNSHostName or
       some other attributes which are not handled by adcli. This also means that dNSHostName
       cannot be empty or only contain a short name if the service principal name should contain
       a fully-qualified name.

       To summarize, if you only have validated write permissions you should make sure the domain
       part of the hostname matches the domain you want to join or use the --host-fqdn with a
       matching name.

       The plain read write permissions do not run additional validations but the attribute
       values must still be in agreement with the general constraints mentioned above. If the
       computer object already exists adcli might need the following permissions which are also
       needed by Windows clients to modify existing attributes:

       •   Reset Password

       •   Read and write Account Restrictions

       •   Read and (validated) write to DNS host name

       •   Read and (validated) write to service principal name

       additionally adcli needs

       •   Read and write msDS-supportedEncryptionTypes

       This is added for security reasons to avoid that Active Directory stores Kerberos keys
       with (potentially weaker) encryption types than the client supports since Active Directory
       is often configured to still support older (weaker) encryption types for compatibility
       reasons.

       All other attributes are only set or modified on demand, i.e. adcli must be called with an
       option the would set or modify the given attribute. In the following the attributes adcli
       can modify together with the required permissions are listed:

       •   userPrincipalName

           •   Read/Write userPrincipal Name

       •   msDS-supportedEncryptionTypes

           •   Read/Write msDS-SupportedEncryptionTypes

       •   dNSHostName

           •   Read/Write dNSHostName

           •   Read and write DNS host name attributes

           •   Validated write to DNS host name

       •   servicePrincipalName

           •   Read/Write servicePrincipalName

           •   Validated write to service principal name

       •   operatingSystem

           •   Read/Write Operating System

       •   operatingSystemVersion

           •   Read/Write Operating System Version

       •   operatingSystemServicePack

           •   Read/Write operatingSystemServicePack

       •   userAccountControl

           •   Read/Write userAccountControl

       •   description

           •   Read/Write Description

       For the management of users and groups (adcli create-user, adcli delete-user, adcli
       create-group, adcli delete-group) the same applies only for different types of objects,
       i.e. users and groups. Since currently adcli only supports the creation and the removal of
       user and group objects it is sufficient to have the "Create/Delete User objects" and
       "Create/Delete Group objects" permissions.

       If you want to manage group members as well (adcli add-member, adcli remove-member)
       "Read/Write Members" permissions are needed as well.

       Depending on the version of Active Directory the "Delegation of Control Wizard" might
       offer some shortcuts for common task like e.g.

       •   Create, delete and manage user accounts

       •   Create, delete and manage groups

       •   Modify the membership of a group

       The first 2 shortcuts will provided full access to user and group objects which, as
       explained above, is more than currently is needed. After using those shortcut it is a good
       idea to verify in the "Security" tab in the "Properties" of the related Active Directory
       container that the assigned permissions meet the expectations.

BUGS

       Please send bug reports to either the distribution bug tracker or the upstream bug tracker
       at https://bugs.freedesktop.org/enter_bug.cgi?product=realmd&component=adcli

NOTES

        1. Who can add workstation to the domain
           https://docs.microsoft.com/en-us/archive/blogs/dubaisec/who-can-add-workstation-to-the-domain

        2. dNSHostName
           https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-adts/5c578b15-d619-408d-ba17-380714b89fd1

        3. servicePrincipalName
           https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-adts/28ca4eca-0e0b-4666-9175-a37ccb8edada

NAME

SYNOPSIS

GENERAL OVERVIEW

QUERYING DOMAIN INFORMATION

JOINING THE LOCAL MACHINE TO A DOMAIN

UPDATING THE MACHINE ACCOUNT PASSWORD AND OTHER ATTRIBUTES

TESTING IF THE MACHINE ACCOUNT PASSWORD IS VALID

CREATING A USER

DELETING A USER

(RE)SETTING THE PASSWORD OF A USER WITH AN ADMINISTRATIVE ACCOUNT

CREATING A GROUP

DELETING A GROUP

ADDING A MEMBER TO A GROUP

REMOVING A MEMBER FROM A GROUP

PRESET COMPUTER ACCOUNTS

RESET COMPUTER ACCOUNT

DELETE COMPUTER ACCOUNT

SHOW COMPUTER ACCOUNT ATTRIBUTES

CREATE A MANAGED SERVICE ACCOUNT

DELEGATED PERMISSIONS

BUGS

SEE ALSO

NOTES