Provided by: auditd_3.1.2-2.1build1.1_amd64 
NAME
auditctl - a utility to assist controlling the kernel's audit system
SYNOPSIS
auditctl [options]
DESCRIPTION
The auditctl program is used to configure kernel options related to auditing, to see
status of the configuration, and to load discretionary audit rules.
CONFIGURATION OPTIONS
-b backlog
Set max number (limit) of outstanding audit buffers allowed (Kernel Default=64) If
all buffers are full, the failure flag is consulted by the kernel for action.
--backlog_wait_time wait_time
Set the time for the kernel to wait (Kernel Default 60*HZ) when the backlog limit
is reached before queuing more audit events to be transferred to auditd. The number
must be greater than or equal to zero and less than 10 times the default value.
--reset_backlog_wait_time_actual
Reset the actual backlog wait time counter shown by the status command.
-c Continue loading rules in spite of an error. This summarizes the results of loading
the rules. The exit code will not be success if any rule fails to load.
-D Delete all rules and watches. This can take a key option (-k), too.
-e [0..2]
Set enabled flag. When 0 is passed, this can be used to temporarily disable
auditing. When 1 is passed as an argument, it will enable auditing. To lock the
audit configuration so that it can't be changed, pass a 2 as the argument. Locking
the configuration is intended to be the last command in audit.rules for anyone
wishing this feature to be active. Any attempt to change the configuration in this
mode will be audited and denied. The configuration can only be changed by rebooting
the machine.
-f [0..2]
Set failure mode 0=silent 1=printk 2=panic. This option lets you determine how you
want the kernel to handle critical errors. Example conditions where this mode may
have an effect includes: transmission errors to userspace audit daemon, backlog
limit exceeded, out of kernel memory, and rate limit exceeded. The default value is
1. Secure environments will probably want to set this to 2.
-h Help
-i When given by itself, ignore errors when reading rules from a file. This causes
auditctl to always return a success exit code. If passed as an argument to -s then
it gives an interpretation of the numbers to human readable words if possible.
--loginuid-immutable
This option tells the kernel to make loginuids unchangeable once they are set.
Changing loginuids requires CAP_AUDIT_CONTROL. So, its not something that can be
done by unprivileged users. Setting this makes loginuid tamper-proof, but can cause
some problems in certain kinds of containers.
-q mount-point,subtree
If you have an existing directory watch and bind or move mount another subtree in
the watched subtree, you need to tell the kernel to make the subtree being mounted
equivalent to the directory being watched. If the subtree is already mounted at the
time the directory watch is issued, the subtree is automatically tagged for
watching. Please note the comma separating the two values. Omitting it will cause
errors.
-r rate
Set limit in messages/sec (0=none). If this rate is non-zero and is exceeded, the
failure flag is consulted by the kernel for action. The default value is 0.
--reset-lost
Reset the lost record counter shown by the status command.
-R file
Read and execute auditctl commands from a file. The commands are executed line-by-
line, in the order that they appear in the file. The file must be owned by root and
not readable by other users, or else it will be rejected. Empty lines are skipped.
Lines starting with the '#' character are treated as comment lines. Each line is
executed as if it was provided to auditctl as command line arguments. Since
auditctl is the one reading the file and not a shell such as bash, do not escape
special shell characters. See the EXAMPLES section for an example.
--signal signal
Send a signal to the audit daemon. You must have privileges to do this. Supported
signals are TERM, HUP, USR1, USR2, CONT
and user friendly versions stop, reload, rotate, resume, state.
-t Trim the subtrees after a mount command.
STATUS OPTIONS
-l List all rules 1 per line. Two more options may be given to this command. You can
give either a key option (-k) to list rules that match a key or a (-i) to have a0
through a3 interpreted to help determine the syscall argument values are correct .
-m text
Send a user space message into the audit system. This can only be done if you have
CAP_AUDIT_WRITE capability (normally the root user has this). The resulting event
will be the USER type.
-s Report the kernel's audit subsystem status. It will tell you the in-kernel values
that can be set by -e, -f, -r, and -b options. The pid value is the process number
of the audit daemon. Note that a pid of 0 indicates that the audit daemon is not
running. The lost entry will tell you how many event records that have been
discarded due to the kernel audit queue overflowing. The backlog field tells how
many event records are currently queued waiting for auditd to read them. This
option can be followed by the -i to get a couple fields interpreted.
-v Print the version of auditctl.
RULE OPTIONS
-a [list,action|action,list]
Append rule to the end of list with action. Please note the comma separating the
two values. Omitting it will cause errors. The fields may be in either order. It
could be list,action or action,list. The following describes the valid list names:
task Add a rule to the per task list. This rule list is used only at the
time a task is created -- when fork() or clone() are called by the
parent task. When using this list, you should only use fields that are
known at task creation time, such as the uid, gid, etc.
exit Add a rule to the syscall exit list. This list is used upon exit from a
system call to determine if an audit event should be created.
user Add a rule to the user message filter list. This list is used by the
kernel to filter events originating in user space before relaying them
to the audit daemon. It should be noted that the only fields that are
valid are: uid, auid, gid, pid, subj_user, subj_role, subj_type,
subj_sen, subj_clr, msgtype, and executable name. All other fields will
be treated as non-matching. It should be understood that any event
originating from user space from a process that has CAP_AUDIT_WRITE
will be recorded into the audit trail. This means that the most likely
use for this filter is with rules that have an action of never since
nothing has to be done to allow events to be recorded.
exclude Add a rule to the event type exclusion filter list. This list is used
to filter events that you do not want to see. For example, if you do
not want to see any avc messages, you would using this list to record
that. Events can be excluded by process ID, user ID, group ID, login
user ID, message type, subject context, or executable name. The action
is ignored and uses its default of "never".
filesystem Add a rule that will be applied to a whole filesystem. The filesystem
must be identified with a fstype field. Normally this filter is used to
exclude any events for a whole filesystem such as tracefs or debugfs.
io_uring Add a rule to the io_uring syscall filter. Rules against this filter
specify the syscall operation using the -S syscall notion explained
below. You can add a key field to the rule so that it may be grouped
with other rules watching the same underlying syscall.
The following describes the valid actions for the rule:
never No audit records will be generated. This can be used to suppress event
generation. In general, you want suppressions at the top of the list
instead of the bottom. This is because the event triggers on the first
matching rule.
always Allocate an audit context, always fill it in at syscall entry time, and
always write out a record at syscall exit time.
-A list,action
Add rule to the beginning list with action.
-C [f=f | f!=f]
Build an inter-field comparison rule: field, operation, field. You may pass
multiple comparisons on a single command line. Each one must start with -C. Each
inter-field equation is anded with each other as well as equations starting with -F
to trigger an audit record. There are 2 operators supported - equal, and not equal.
Valid fields are:
auid, uid, euid, suid, fsuid, obj_uid; and gid, egid, sgid, fsgid, obj_gid
The two groups of uid and gid cannot be mixed. But any comparison within the group
can be made. The obj_uid/gid fields are collected from the object of the event such
as a file or directory.
-d list,action
Delete rule from list with action. The rule is deleted only if it exactly matches
syscall name(s) and every field name and value.
-F [n=v | n!=v | n<v | n>v | n<=v | n>=v | n&v | n&=v]
Build a rule field: name, operation, value. You may have up to 64 fields passed on
a single command line. Each one must start with -F. Each field equation is anded
with each other (as well as equations starting with -C) to trigger an audit record.
There are 8 operators supported - equal, not equal, less than, greater than, less
than or equal, and greater than or equal, bit mask, and bit test respectively. Bit
test will "and" the values and check that they are equal, bit mask just "ands" the
values. Fields that take a user ID may instead have the user's name; the program
will convert the name to user ID. The same is true of group names. Valid fields
are:
a0, a1, a2, a3
Respectively, the first 4 arguments to a syscall. Note that string
arguments are not supported. This is because the kernel is passed a
pointer to the string. Triggering on a pointer address value is not
likely to work. So, when using this, you should only use on numeric
values. This is most likely to be used on platforms that multiplex
socket or IPC operations.
arch The CPU architecture of the syscall. The arch can be found doing 'uname
-m'. If you do not know the arch of your machine but you want to use
the 32 bit syscall table and your machine supports 32 bit, you can also
use b32 for the arch. The same applies to the 64 bit syscall table, you
can use b64. In this way, you can write rules that are somewhat arch
independent because the family type will be auto detected. However,
syscalls can be arch specific and what is available on x86_64, may not
be available on ppc. The arch directive should precede the -S option so
that auditctl knows which internal table to use to look up the syscall
numbers.
auid The original ID the user logged in with. Its an abbreviation of audit
uid. Sometimes its referred to as loginuid. Either the user account
text or number may be used.
devmajor Device Major Number
devminor Device Minor Number
dir Full Path of Directory to watch. This will place a recursive watch on
the directory and its whole subtree. It can only be used on exit list.
See "-w".
egid Effective Group ID. May be numeric or the groups name.
euid Effective User ID. May be numeric or the user account name.
exe Absolute path to application that while executing this rule will apply
to. It supports = and != operators. Note that you can only use this
once for each rule.
exit Exit value from a syscall. If the exit code is an errno, you may use
the text representation, too.
fsgid Filesystem Group ID. May be numeric or the groups name.
fstype File system type. This is used with the filesystem rule list. The only
values supported are debugfs and tracefs.
fsuid Filesystem User ID. May be numeric or the user account name.
filetype The target file's type. Can be either file, dir, socket, link,
character, block, or fifo.
gid Group ID. May be numeric or the groups name.
inode Inode Number
key This is another way of setting a filter key. See discussion above for
-k option.
msgtype This is used to match the event's record type. It should only be used
on the exclude or user filter lists.
obj_uid Object's UID
obj_gid Object's GID
obj_user Resource's SE Linux User
obj_role Resource's SE Linux Role
obj_type Resource's SE Linux Type
obj_lev_low Resource's SE Linux Low Level
obj_lev_high
Resource's SE Linux High Level
path Full Path of File to watch. It can only be used on exit list.
perm Permission filter for file operations. See "-p". It can only be used on
exit list. You can use this without specifying a syscall and the kernel
will select the syscalls that satisfy the permissions being requested.
pers OS Personality Number
pid Process ID
ppid Parent's Process ID
saddr_fam Address family number as found in /usr/include/bits/socket.h. For
example, IPv4 would be 2 and IPv6 would be 10.
sessionid User's login session ID
subj_user Program's SE Linux User
subj_role Program's SE Linux Role
subj_type Program's SE Linux Type
subj_sen Program's SE Linux Sensitivity
subj_clr Program's SE Linux Clearance
sgid Saved Group ID. See getresgid(2) man page.
success If the exit value is >= 0 this is true/yes otherwise its false/no. When
writing a rule, use a 1 for true/yes and a 0 for false/no
suid Saved User ID. See getresuid(2) man page.
uid User ID. May be numeric or the user account name.
-k key Set a filter key on an audit rule. The filter key is an arbitrary string of text
that can be up to 31 bytes long. It can uniquely identify the audit records
produced by a rule. Typical use is for when you have several rules that together
satisfy a security requirement. The key value can be searched on with ausearch so
that no matter which rule triggered the event, you can find its results. The key
can also be used on delete all (-D) and list rules (-l) to select rules with a
specific key. You may have more than one key on a rule if you want to be able to
search logged events in multiple ways or if you have an auditd plugin that uses a
key to aid its analysis.
-p [r|w|x|a]
Describe the permission access type that a file system watch will trigger on.
r=read, w=write, x=execute, a=attribute change. These permissions are not the
standard file permissions, but rather the kind of syscall that would do this kind
of thing. The read & write syscalls are omitted from this set since they would
overwhelm the logs. But rather for reads or writes, the open flags are looked at to
see what permission was requested.
-S [Syscall name or number|all]
Any syscall name or number may be used. The word 'all' may also be used. If the
given syscall is made by a program, then start an audit record. If a field rule is
given and no syscall is specified, it will default to all syscalls. You may also
specify multiple syscalls in the same rule by using multiple -S options in the same
rule. Doing so improves performance since fewer rules need to be evaluated.
Alternatively, you may pass a comma separated list of syscall names. If you are on
a bi-arch system, like x86_64, you should be aware that auditctl simply takes the
text, looks it up for the native arch (in this case b64) and sends that rule to the
kernel. If there are no additional arch directives, IT WILL APPLY TO BOTH 32 & 64
BIT SYSCALLS. This can have undesirable effects since there is no guarantee that
any syscall has the same number on both 32 and 64 bit interfaces. You will likely
want to control this and write 2 rules, one with arch equal to b32 and one with b64
to make sure the kernel finds the events that you intend. See the arch field
discussion for more info.
-w path
Insert a watch for the file system object at path. You cannot insert a watch to the
top level directory. This is prohibited by the kernel. Wildcards are not supported
either and will generate a warning. The way that watches work is by tracking the
inode internally. If you place a watch on a file, its the same as using the -F path
option on a syscall rule. If you place a watch on a directory, its the same as
using the -F dir option on a syscall rule. The -w form of writing watches is for
backwards compatibility and the syscall based form is more expressive. Unlike most
syscall auditing rules, watches do not impact performance based on the number of
rules sent to the kernel. The only valid options when using a watch are the -p and
-k. If you need to do anything fancy like audit a specific user accessing a file,
then use the syscall auditing form with the path or dir fields. See the EXAMPLES
section for an example of converting one form to another.
-W path
Remove a watch for the file system object at path. The rule must match exactly. See
-d discussion for more info.
PERFORMANCE TIPS
Syscall rules get evaluated for each syscall for every program. If you have 10 syscall
rules, every program on your system will delay during a syscall while the audit system
evaluates each rule. Too many syscall rules will hurt performance. Try to combine as many
as you can whenever the filter, action, key, and fields are identical. For example:
auditctl -a always,exit -F arch=b64 -S openat -F success=0
auditctl -a always,exit -F arch=b64 -S truncate -F success=0
could be re-written as one rule:
auditctl -a always,exit -F arch=b64 -S openat -S truncate -F success=0
Also, try to use file system auditing wherever practical. This improves performance. For
example, if you were wanting to capture all failed opens & truncates like above, but were
only concerned about files in /etc and didn't care about /usr or /sbin, its possible to
use this rule:
auditctl -a always,exit -S openat -S truncate -F dir=/etc -F success=0
This will be higher performance since the kernel will not evaluate it each and every
syscall. It will be handled by the filesystem auditing code and only checked on filesystem
related syscalls.
EXAMPLES
To see all syscalls made by a specific program:
# By pid:
auditctl -a always,exit -S all -F pid=1005
# By executable path
auditctl -a always,exit -S all -F exe=/usr/bin/ls
To see files opened by a specific user:
auditctl -a always,exit -S openat -F auid=510
To see unsuccessful openat calls:
auditctl -a always,exit -S openat -F success=0
To watch a file for changes (2 ways to express):
auditctl -w /etc/shadow -p wa
auditctl -a always,exit -F path=/etc/shadow -F perm=wa
To recursively watch a directory for changes (2 ways to express):
auditctl -w /etc/ -p wa
auditctl -a always,exit -F dir=/etc/ -F perm=wa
To see if an admin is accessing other user's files:
auditctl -a always,exit -F dir=/home/ -F uid=0 -C auid!=obj_uid
This is an example rules file:
# Remove all existing rules
-D
# Never record sudo invocations
-A exclude,always -F exe=/usr/bin/sudo
DISABLED BY DEFAULT
On many systems auditd is configured to install an -a never,task rule by default. This
rule causes every new process to skip all audit rule processing. This is usually done to
avoid a small performance overhead imposed by syscall auditing. If you want to use auditd,
you need to remove that rule by deleting 10-no-audit.rules and adding 10-base-config.rules
to the audit rules directory.
If you have defined audit rules that are not matching when they should, check auditctl -l
to make sure there is no never,task rule there.
FILES
/etc/audit/audit.rules /etc/audit/audit-stop.rules
SEE ALSO
audit.rules(7), ausearch(8), aureport(8), auditd(8).
AUTHOR
Steve Grubb