Provided by: fence-agents-eps_4.12.1-2~exp1ubuntu4_all 
NAME
fence_eps - Fence agent for ePowerSwitch
DESCRIPTION
fence_eps is an I/O Fencing agent which can be used with the ePowerSwitch 8M+ power switch to fence
connected machines. Fence agent works ONLY on 8M+ device, because this is only one, which has support for
hidden page feature.
Agent basically works by connecting to hidden page and pass appropriate arguments to GET request. This
means, that hidden page feature must be enabled and properly configured.
fence_eps accepts options on the command line as well as from stdin. Fenced sends parameters through
stdin when it execs the agent. fence_eps can be run by itself with command line options. This is useful
for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.epowerswitch.com
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 80)
-c, --page=[page]
Name of hidden page (Default Value: hidden.htm)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is always
required.
-l, --username=[name]
Login name
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase
verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the
command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device.
Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained
without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
ip IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 80)
page Name of hidden page (Default Value: hidden.htm) Obsoletes: hidden_page
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug Physical plug number on device, UUID or identification of machine This parameter is always
required. Obsoletes: port
username
Login name Obsoletes: login
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase
verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the
command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
retry_on
Count of attempts to retry power on (Default Value: 1)