Provided by: fence-agents-heuristics-ping_4.12.1-2~exp1ubuntu4_all bug

NAME

       fence_heuristics_ping - Fence agent for ping-heuristic based fencing

DESCRIPTION

       fence_heuristics_ping  uses ping-heuristics to control execution of another fence agent on
       the same fencing level.

       This is not a fence agent by itself! Its only purpose is to enable/disable  another  fence
       agent that lives on the same fencing level but after fence_heuristics_ping.

       fence_heuristics_ping  accepts  options  on the command line as well as from stdin. Fenced
       sends parameters through stdin when it execs the agent. fence_heuristics_ping can  be  run
       by  itself  with command line options.  This is useful for testing and for turning outlets
       on or off from scripts.

       Vendor URL:

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -m, --method=[method]
              Method to fence (onoff|cycle) (Default Value: cycle)

       --ping-count=[number]
              The number of ping-probes that is being sent per target (Default Value: 10)

       --ping-good-count=[number]
              The number of positive ping-probes  required  to  account  a  target  as  available
              (Default Value: 8)

       --ping-interval=[seconds]
              The interval in seconds between ping-probes (Default Value: 1)

       --ping-maxfail=[number]
              The  number  of  failed  ping-targets  to still account as overall success (Default
              Value: 0)

       --ping-targets=tgt1,[inet6:]tgt2
              A comma  separated  list  of  ping-targets  (optionally  prepended  by  'inet:'  or
              'inet6:') to be probed (Default Value: )

       --ping-timeout=[seconds]
              The  timeout in seconds till an individual ping-probe is accounted as lost (Default
              Value: 2)

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug-file or logging  to
              syslog.

       -v, --verbose
              Verbose  mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
              increase verbosity.

       --verbose-level
              Level of debugging detail in output. Defaults to  the  number  of  --verbose  flags
              specified  on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --plug-separator=[char]
              Separator for plug parameter when specifying more than 1 plug  (Default  Value:  ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --stonith-status-sleep=[seconds]
              Sleep  X  seconds  between  status calls during a STONITH action (Default Value: 1)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       method Method to fence (onoff|cycle) (Default Value: cycle)

       ping_count
              The number of ping-probes that is being sent per target (Default Value: 10)

       ping_good_count
              The number of positive ping-probes  required  to  account  a  target  as  available
              (Default Value: 8)

       ping_interval
              The interval in seconds between ping-probes (Default Value: 1)

       ping_maxfail
              The  number  of  failed  ping-targets  to still account as overall success (Default
              Value: 0)

       ping_targets
              A comma  separated  list  of  ping-targets  (optionally  prepended  by  'inet:'  or
              'inet6:') to be probed (Default Value: )

       ping_timeout
              The  timeout in seconds till an individual ping-probe is accounted as lost (Default
              Value: 2)

       quiet  Disable logging to stderr. Does not affect --verbose or --debug-file or logging  to
              syslog.

       verbose
              Verbose  mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
              increase verbosity.

       verbose_level
              Level of debugging detail in output. Defaults to  the  number  of  --verbose  flags
              specified  on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       plug_separator
              Separator for plug parameter when specifying more than 1 plug  (Default  Value:  ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       stonith_status_sleep
              Sleep  X  seconds  between  status calls during a STONITH action (Default Value: 1)

       retry_on
              Count of attempts to retry power on (Default Value: 1)