NAME

       fence_powerman - Fence Agent for Powerman

DESCRIPTION

       This  is a Pacemaker Fence Agent for the Powerman management utility that was designed for
       LLNL systems.

       fence_powerman accepts options on the command line as well as  from  stdin.  Fenced  sends
       parameters through stdin when it execs the agent. fence_powerman can be run by itself with
       command line options.  This is useful for testing and for turning outlets on or  off  from
       scripts.

       Vendor URL: https://github.com/chaos/powerman

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -a, --ip=[ip]
              IP address or hostname of fencing device

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device (Default Value: 10101)

       -n, --plug=[ip]
              IP address or hostname of fencing device (together with --port-as-ip)

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       --verbose-level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --plug-separator=[char]
              Separator  for  plug  parameter when specifying more than 1 plug (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 3)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --port-as-ip
              Make "port/plug" to be an alias to IP address

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 3)

       --powerman-path=[path]
              Path to powerman binary (Default Value: /usr/bin/powerman)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --stonith-status-sleep=[seconds]
              Sleep X seconds between status calls during a STONITH  action  (Default  Value:  1)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       ip     IP address or hostname of fencing device Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default Value: 10101)

       plug   IP  address  or  hostname of fencing device (together with --port-as-ip) Obsoletes:
              port

       quiet  Disable logging to stderr. Does not affect --verbose or --debug-file or logging  to
              syslog.

       verbose
              Verbose  mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
              increase verbosity.

       verbose_level
              Level of debugging detail in output. Defaults to  the  number  of  --verbose  flags
              specified  on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       plug_separator
              Separator for plug parameter when specifying more than 1 plug  (Default  Value:  ,)

       delay  Wait X seconds before fencing is started (Default Value: 3)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       port_as_ip
              Make "port/plug" to be an alias to IP address

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 3)

       powerman_path
              Path to powerman binary (Default Value: /usr/bin/powerman)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       stonith_status_sleep
              Sleep  X  seconds  between  status calls during a STONITH action (Default Value: 1)

       retry_on
              Count of attempts to retry power on (Default Value: 1)