Provided by: fence-agents-rsb_4.12.1-2~exp1ubuntu4_all
NAME
fence_rsb - I/O Fencing agent for Fujitsu-Siemens RSB
DESCRIPTION
fence_rsb is an I/O Fencing agent which can be used with the Fujitsu-Siemens RSB management interface. It logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. fence_rsb accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_rsb can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.fujitsu.com
PARAMETERS
-o, --action=[action] Fencing action (Default Value: reboot) -c, --command-prompt=[prompt] Force Python regex for command prompt (Default Value: ['to quit:']) -k, --identity-file=[filename] Identity file (private key) for SSH -4, --inet4-only Forces agent to use IPv4 addresses only -6, --inet6-only Forces agent to use IPv6 addresses only -a, --ip=[ip] IP address or hostname of fencing device -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 3172) -p, --password=[password] Login password or passphrase -S, --password-script=[script] Script to run to retrieve password -n, --plug=[ip] IP address or hostname of fencing device (together with --port-as-ip) -x, --ssh Use SSH connection --ssh-options=[options] SSH options to use -l, --username=[name] Login name This parameter is always required. -q, --quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog. -v, --verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. --verbose-level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin). -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --plug-separator=[char] Separator for plug parameter when specifying more than 1 plug (Default Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --disable-timeout=[true/false] Disable timeout (true/false) (default: true when run from Pacemaker 2.0+) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --port-as-ip Make "port/plug" to be an alias to IP address --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --stonith-status-sleep=[seconds] Sleep X seconds between status calls during a STONITH action (Default Value: 1) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) --ssh-path=[path] Path to ssh binary (Default Value: /usr/bin/ssh) --telnet-path=[path] Path to telnet binary (Default Value: /usr/bin/telnet)
ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. monitor Check the health of fence device metadata Display the XML metadata describing this resource. manpage The operational behavior of this is not known. validate-all Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot) command_prompt Force Python regex for command prompt (Default Value: ['to quit:']) Obsoletes: cmd_prompt identity_file Identity file (private key) for SSH inet4_only Forces agent to use IPv4 addresses only inet6_only Forces agent to use IPv6 addresses only ip IP address or hostname of fencing device Obsoletes: ipaddr ipport TCP/UDP port to use for connection with device (Default Value: 3172) password Login password or passphrase Obsoletes: passwd password_script Script to run to retrieve password Obsoletes: passwd_script plug IP address or hostname of fencing device (together with --port-as-ip) Obsoletes: port ssh Use SSH connection Obsoletes: secure ssh_options SSH options to use username Login name This parameter is always required. Obsoletes: login quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog. verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. verbose_level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin). debug_file Write debug information to given file Obsoletes: debug version Display version information and exit help Display help and exit plug_separator Separator for plug parameter when specifying more than 1 plug (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) disable_timeout Disable timeout (true/false) (default: true when run from Pacemaker 2.0+) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) port_as_ip Make "port/plug" to be an alias to IP address power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) stonith_status_sleep Sleep X seconds between status calls during a STONITH action (Default Value: 1) retry_on Count of attempts to retry power on (Default Value: 1) ssh_path Path to ssh binary (Default Value: /usr/bin/ssh) telnet_path Path to telnet binary (Default Value: /usr/bin/telnet)