NAME

       fence_wti - Fence agent for WTI

DESCRIPTION

       fence_wti  is  an  I/O  Fencing  agent which can be used with the WTI Network Power Switch
       (NPS). It logs into an NPS via telnet or ssh and boots a specified  plug.  Lengthy  telnet
       connections  to  the  NPS  should  be  avoided  while a GFS cluster is running because the
       connection will block any necessary fencing actions.

       fence_wti accepts options on the  command  line  as  well  as  from  stdin.  Fenced  sends
       parameters  through  stdin  when  it  execs the agent. fence_wti can be run by itself with
       command line options.  This is useful for testing and for turning outlets on or  off  from
       scripts.

       Vendor URL: http://www.wti.com

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --command-prompt=[prompt]
              Force  Python  regex  for  command  prompt (Default Value: ['RSM>', 'MPC>', 'IPS>',
              'TPS>', 'NBB>', 'NPS>', 'VMR>'])

       -k, --identity-file=[filename]
              Identity file (private key) for SSH

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device This parameter is always required.

       -u, --ipport=[port]
              TCP/UDP  port  to  use  for  connection with device (Default Value: 23)

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       -x, --ssh
              Use SSH connection

       --ssh-options=[options]
              SSH options to use

       -l, --username=[name]
              Login name

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       --verbose-level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --plug-separator=[char]
              Separator  for  plug  parameter when specifying more than 1 plug (Default Value: ,)

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 10)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --stonith-status-sleep=[seconds]
              Sleep X seconds between status calls during a STONITH  action  (Default  Value:  1)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --ssh-path=[path]
              Path to ssh binary (Default Value: /usr/bin/ssh)

       --telnet-path=[path]
              Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if it  can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       command_prompt
              Force  Python  regex  for  command  prompt (Default Value: ['RSM>', 'MPC>', 'IPS>',
              'TPS>', 'NBB>', 'NPS>', 'VMR>']) Obsoletes: cmd_prompt

       identity_file
              Identity file (private key) for SSH

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ip     IP address or hostname  of  fencing  device  This  parameter  is  always  required.
              Obsoletes: ipaddr

       ipport TCP/UDP  port  to  use  for  connection with device (Default Value: 23)

       password
              Login password or passphrase Obsoletes: passwd

       password_script
              Script to run to retrieve password Obsoletes: passwd_script

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       ssh    Use SSH connection Obsoletes: secure

       ssh_options
              SSH options to use

       username
              Login name Obsoletes: login

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       verbose_level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       plug_separator
              Separator  for  plug  parameter when specifying more than 1 plug (Default Value: ,)

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 10)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       stonith_status_sleep
              Sleep X seconds between status calls during a STONITH  action  (Default  Value:  1)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       ssh_path
              Path to ssh binary (Default Value: /usr/bin/ssh)

       telnet_path
              Path to telnet binary (Default Value: /usr/bin/telnet)