Provided by: fwlogwatch_1.4-4_amd64 
NAME
fwlogwatch - a firewall log analyzer and realtime response agent
SYNOPSIS
fwlogwatch [options] [input_files]
DESCRIPTION
fwlogwatch produces Linux ipchains, Linux netfilter/iptables, Solaris/BSD/IRIX/HP-UX
ipfilter, ipfw, Cisco IOS, Cisco PIX/ASA, NetScreen, Elsa Lancom router and Snort IDS log
summary reports in plain text and HTML form and has a lot of options to analyze and
display relevant patterns. It also can run as daemon (with web interface) doing realtime
log monitoring and reporting anomalies or starting attack countermeasures.
GENERAL OPTIONS
These options are independent from the main modes of operation.
-h Show the available options.
-L Show time of the first and the last log entry. The input file(s) can be compressed
or plain log file(s). Summary mode will show the time of the first and last packet
log entry, this log times mode will show the time of the first and last entry
overall.
-V Show version and copyright information and the options used to compile fwlogwatch.
GLOBAL OPTIONS
The global options for all modes are:
-b Show the amount of data in bytes this entry represents, this is the sum of total
packet lengths of packets matching this rule (obviously only available for log
formats that contain this information).
-c config
Use the alternate configuration file config instead of the default configuration
file /etc/fwlogwatch/fwlogwatch.config (which does not need to exist). Only options
not specified in the files can be overridden by command line options.
-D Do not differentiate destination IP addresses. Useful for finding scans in whole
subnets.
-d Differentiate destination ports.
-E format
Specific hosts, ports, chains and branches (targets) can be selected or excluded,
selections an exclusions can be added and combined. The format is composed of one
of the functions i include or e exclude, then one of the parameters h host, p port,
c chain or b branch. In case of a host or port a third parameter for s source or d
destination is needed. Finally, the object is directly appended, in case of a host
this is an IP address (networks can be specified in CIDR format), port is a number
and chain and branch are strings. To show entries with destination port 25 you
would use -Eipd25 and to exclude entries which have the class C network 192.168.1.0
as source or belong to the chain INPUT: -Eehs192.168.1.0/24 -EecINPUT
-i file
If your logs contain private IP addresses that are not resolvable through DNS but
you want reports with meaningful host names or you have any other reason to
influence the host names in reports you can initialize the DNS cache with your own
list of IP/name pairs. The file should be in the same format as /etc/hosts and will
not be modified.
-M number
If you only want to see a fixed maximum amount of entries (e.g. the "top 20") this
option will trim the output for you.
-m count
When analyzing large amounts of data you usually aren't interested in entries that
have a small count. You can hide entries below a certain threshold with this
option.
-N Enable service lookups. The service name for a specific port number and protocol
will be looked up in /etc/services.
-n Enable DNS lookups. Host names will be resolved (reverse and forward lookup with a
warning if they don't match). If this makes summary generation very slow (this
happens when a lot of different hosts appear in the log file) you should use a
version of fwlogwatch compiled with GNU adns support. Resolved host names are
cached in memory for as long as fwlogwatch is running, the DNS cache can be
initialized with the -i option.
-O order
This is the sort order of the summary and packet cache. Since entries often are
equal in certain fields you can sort by several fields one after another (the sort
algorithm is stable, so equal entries will remain sorted in the order they were
sorted before). The sort string can be composed of up to 11 fields of the form ab
where a is the sort criteria: c count, t start time, e end time, z duration, n
target name, p protocol, b byte count (sum of total packet lengths), S source host,
s source port, D destination host and d destination port. b is the direction: a
ascending and d descending. Sorting is done in the order specified, so the last
option is the primary criteria. The default in summary mode is tacd (start with the
highest count, if two counts match list the one earlier in time first) of which ta
is built in, so if you specify an empty sort string or everything else is equal
entries will be sorted ascending by time. The realtime response mode default is cd
( ta is not built in).
-P format
Only use certain parsers, where the log format can be one or a combination of: i
ipchains, n netfilter, f ipfilter, b ipfw, c Cisco IOS, p Cisco PIX/ASA, e
NetScreen, l Elsa Lancom and s Snort. The default is to use all parsers except the
ones for NetScreen, Elsa Lancom and Snort logs.
-p Differentiate protocols. This is activated automatically if you differentiate
source and/or destination ports.
-s Differentiate source ports.
-U title
Set title as title of the report and status page.
-v Be verbose. You can specify it twice for more information. In very verbose mode
while parsing the log file you will see "." for relevant packet filter log entries,
"r" for 'last message repeated' entries concerning packet filter logs, "o" for
packet filter log entries that are too old and "_" for entries that are not packet
filter logs.
-y Differentiate TCP options. All packets with a SYN are listed separately, other TCP
flags are shown in full format if they are available (ipchains does not log them,
netfilter and ipfilter do, Cisco IOS doesn't even log SYNs).
LOG SUMMARY MODE
This are additional options that are only available in log summary mode:
-C email
A carbon copy of the summary will be sent by email to this address.
-e Show timestamp of the last packet logged for this entry. End times are only
available if there is more than one packet log entry with unique characteristics.
-F email
Set the sender address of the email.
-l time
Process recent events only. See TIME FORMAT below for the time options.
-o file
Specify an output file.
-S Do not differentiate source IP addresses.
-T email
The summary will be sent by email to this address. If HTML output is selected the
report will be embedded as attachment so HTML-aware mail clients can show it
directly.
-t Show timestamp of the first packet logged for this entry.
-W Look up information about the source addresses in the whois database. This is slow,
please don't stress the registry with too many queries.
-w Produce output in HTML format (XHTML 1.1 with CSS).
-z Show time interval between start and end time of packet log entries. This is only
available if there is more than one packet log entry with unique characteristics.
REALTIME RESPONSE MODE
-R Enter realtime response mode. This means: detach and run as daemon until the TERM
signal (kill) is received. The HUP signal forces a reload of the configuration
file, the USR1 signal forces fwlogwatch to reopen and read the input file from the
beginning (useful e.g. for log rotation). All output can be followed in the system
log.
-a count
Alert threshold. Notify or start countermeasures if this limit is reached.
Defaults to 5.
-l time
Forget events that happened this long ago (defaults to 1 day). See TIME FORMAT
below for the time options.
-k IP/net
This option defines a host or network in CIDR notation that will never be blocked
or other actions taken against. To specify more than one, use the -k parameter
again for each IP address or network you want to add.
-A The notification script is invoked when the threshold is reached. A few examples of
possible notifications are included in fwlw_notify, you can add your own ones as
you see fit.
-B The response script is invoked when the threshold is reached. Using the example
script fwlw_respond this will block the attacking host with a new firewall rule. A
new chain for fwlogwatch actions is inserted in the input chain and block rules
added as needed. The chain and its content is removed if fwlogwatch is terminated
normally. The example scripts contain actions for ipchains and netfilter, you can
modify them or add others as you like.
-X port
Activate the internal web server to monitor and control the current status of the
daemon. It listens on the specified port and by default only allows connections
from localhost. The default user name is admin and the default password is fwlogwat
(since DES can only encrypt 8 characters). All options related to the status web
server can be changed in the configuration file.
INPUT FILES
You can specify one or more input files (if none is given it defaults to /var/log/messages
). Relevant entries are automatically detected so combined log files (e.g. from a log
host) are no problem. Compressed files are supported (except in realtime response mode
where they don't make sense anyway). The '-' sign may be used for reading from standard
input (stdin). In realtime response mode the file needs to be specified with an absolute
path since the daemon uses the file system root (/) as working directory.
TIME FORMAT
Time is specified as nx where n is a natural number and x is one of the following: s for
seconds (this is the default), m for minutes, h for hours, d for days, w for weeks, M for
months and y for years.
FILES
/etc/fwlogwatch/fwlogwatch.config
Default configuration file.
/var/log/messages
Default input log file.
/run/fwlogwatch.pid
Default PID file generated by the daemon in realtime response mode if configured to
do so.
FEATURES ONLY IN CONFIGURATION FILE
The following features are only available in the configuration file and not on the command
line, they are presented and explained in more detail in the sample configuration file.
HTML colors and stylesheet
The colors of the HTML output and status page can be customized, an external
cascading stylesheet can be referenced.
Realtime response options
Verification of ipchains rules, PID file handling, the user fwlogwatch should run
as, the location of the notification and response scripts, which address the status
web server listens on, which host can connect, the refresh interval of the status
page and the admin name and password can be configured.
SECURITY
Since fwlogwatch is a security tool special care was taken to make it secure. You can and
should run it with user permissions for most functions, you can make it setgid for a group
/var/log/messages is in if all you need is to be able to read this file. Only the realtime
response mode with activated ipchains rule analysis needs superuser permissions but you
might also need them to write the PID file, for actions in the response script and for
binding the default status port. However, you can configure fwlogwatch to drop root
privileges as soon as possible after allocating these resources (the notification and
response scripts will still be executed with user privileges and log rotation might not
work).
AUTHOR
Boris Wesslowski <bw@inside-security.de>