NAME

       ipmiutil_hpm - PICMG HPM.1 Upgrade Agent

SYNOPSIS

       ipmiutil hpm [-mxNUPREFJTVY] parameters

DESCRIPTION

       This ipmiutil hpm subcommand updates HPM components using PICMG HPM.1 file

       This  utility  can  use  either  the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the
       /dev/ipmikcs driver from valinux, direct user-space IOs, or the IPMI LAN interface if -N.

OPTIONS

       Command line options are described below.

       -m 002000
              Target a specific MC (e.g. bus 00, sa 20, lun 00).  This could be used for  PICMG  or  ATCA  blade
              systems.   The trailing character, if present, indicates SMI addressing if 's', or IPMB addressing
              if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename or IP address of the remote  target  system.   If  a  nodename  is  specified,  IPMI  LAN
              interface is used.  Otherwise the local system management interface is used.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the driver type to one of the followng: imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs,
              smb.  Note that lan2i means lan2 with intelplus.  The default is to detect  any  available  driver
              type and use it.

       -J     Use   the  specified  LanPlus  cipher  suite  (0  thru  17):  0=none/none/none,  1=sha1/none/none,
              2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40,  6=md5/none/none,
              ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback level, 2=User level, 3=Operator level,
              4=Administrator level (default), 5=OEM level.

       -Y     Yes, do prompt the user for the IPMI LAN remote password.  Alternatives for the password are -E or
              -P.

PARAMETERS

       hpm parameters

              check
                     Check the target information.

              check filename
                     Display both the existing target version and image version on the screen.

              download filename
                     Download specified firmware.

              upgrade filename [all] [component x] [activate]
                     Upgrade  the  firmware  using  a  valid  HPM.1  image  file. If no option is specified, the
                     firmware versions are checked  first  and  the  firmware  is  upgraded  only  if  they  are
                     different.

                     all
                            Upgrade  all  components  even  if the firmware versions are the same (use this only
                            after using "check" command).

                     component x
                            Upgrade only given component from the given file.
                            component 0 - BOOT
                            component 1 - RTK

                     activate
                            Activate new firmware right away.

              activate
                     Activate the newly uploaded firmware.

              targetcap
                     Get the target upgrade capabilities.

              compprop id opt
                     Get the specified component properties. Valid  component  id:  0-7.   Opt  can  be  one  of
                     following:
                     0 - General properties
                     1 - Current firmware version
                     2 - Description string
                     3 - Rollback firmware version
                     4 - Deferred firmware version

              abort
                     Abort the on-going firmware upgrade.

              upgstatus
                     Show status of the last long duration command.

              rollback
                     Perform manual rollback on the IPM Controller firmware.

              rollbackstatus
                     Show the rollback status.

              selftestresult
                     Query the self test results.

EXAMPLES

       ipmiutil hpm targetcap
       Gets HPM target capabilities

       ipmiutil hpm -N 192.168.1.1 -U root -P pswd download firmware.img
       Downloads the HPM firmware version contained in firmware.img over IPMI LAN.

SEE ALSO

       ipmiutil(8)  ialarms(8)  iconfig(8)  idiscover(8)  ievents(8)  ifru(8)  igetevent(8)  ihealth(8)  ilan(8)
       ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.

COPYRIGHT

       Copyright (C) 2010  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                                            Version 1.0: 25 Aug 2010                                     IHPM(8)