Provided by: mdevctl_1.3.0-1ubuntu2_amd64 
NAME
mdevctl - Mediated device management utility
SYNOPSIS
mdevctl {COMMAND} [OPTIONS...]
lsmdev [OPTIONS...]
DESCRIPTION
mdevctl is a utility for managing and persisting devices in the mediated device device
framework of the Linux kernel. Mediated devices are sub-devices of a parent device (ex. a
vGPU) which can be dynamically created and potentially used by drivers like vfio-mdev for
assignment to virtual machines.
lsmdev is an alias for mdevctl list.
OPTIONS
The following options are understood:
--addattr=ATTRIBUTE
Add an attribute ATTRIBUTE. Valid for the modify command.
-a|--auto
Automatically start the device on parent availability. Valid for define and modify
commands.
-d|--defined
List all defined devices, even if not active. Valid for the list command. Modify
the defined configuration of a device, even if the device is active. Valid for the
modify command.
--delattr
Delete an attribute entry. Valid for the modify command.
--dumpjson
Dump the configuration for a device in JSON format when filtered to as single
device and used with the list command. When used with the types command, output
machine readable type information.
-i|--index=INDEX
Act on the attribute INDEX. Valid for the modify command.
--jsonfile=FILE
Read the configuration for a device from a JSON file FILE. Valid for the define
and start commands.
-l|--live
Modify active device without modifying the defined configuration of the device.
Valid for the modify command.
-m|--manual
Do not start a device automatically on parent availability. Valid for the modify
command.
-p|--parent=PARENT
Specify or identify the device by its parent device. Note that the parent device is
specified by its kernel sysfs name and is case-sensitive.
-t|--type=TYPE
Specify or identify the device by its type.
-u|--uuid=UUID
Specify or identify the device by its UUID.
--value=VALUE
Set an attribute to VALUE, in the format accepted by the attribute. Valid for the
modify command.
-v|--verbose
Increase output verbosity, currently only adds attribute output to the list
command.
-V|--version
Print mdevctl version.
COMMANDS
The following commands are understood:
define DEVICESPEC
Define a config for an mdev device, identified either by an UUID (if the device
already exists), or by the parent device and either the type or a JSON
configuration file, and, optionally, the UUID. If no UUID is specified, one is
autogenerated and printed. If no file is used, -a|--auto may be used to specify
that the device should be started automatically.
list List mdev devices. With no options, currently running devices are listed. With
-d|--defined, previously defined devices are listed. Can be restricted to list
only devices for a given parent or UUID. With --dumpjson output is provided in
machine readable JSON format. When a UUID is provided and the output results in a
single device, the JSON output format is compatible with the configuration file
format.
modify DEVICESPEC
Modify the configuration for an mdev device, identified via its UUID and optionally
its parent. Type and startup mode (auto or manual) can be modified by this
command. Attributes can be added or deleted. Attributes to be deleted must be
specified by their index; if an attribute is specified without an index, it is
appended at the end of the attribute list. Active devices are unaffected by this
command; changes in the configuration are applied the next time the device is
started. Depending on installed callout scripts active devices can be modified.
With -l|--live modifications can be applied to active devices if a callout scripts
supports the event live. The option -d|--defined also direct the modification to
the started device configuration.
start DEVICESPEC
Start a mediated device. This command can be used to start either a
previously-defined device or a newly-created transient device.
If the UUID and optional parent argument matches an existing device definition,
then the existing device will be started. It is an error to specify a device type
that conflicts with the existing device definition.
If the UUID argument is omitted or if the specified UUID and parent does not match
an existing device definition, a new transient device will be started. If the UUID
is omitted, a new UUID will be automatically generated. When starting a new
transient device, the parent and device type must be specified. A --jsonfile may
replace the --type specification and also include additional attributes in JSON
format to be applied to the started device.
stop DEVICESPEC
Stop an mdev device, specified via its UUID.
types List the mdev device types known to the system by parent device. Output may be
limited to a single parent device with the -p|--parent option. JSON output format
is used with the --dumpjson option.
undefine DEVICESPEC
Undefine, or remove the configuration for an mdev device, specified by its UUID and
optionally its parent. If a UUID exists for multiple parents, all of them will be
removed unless restricted to a single parent. Running devices are unaffected by
this command.
NOTE ON DEVICE SPECIFICATION
For a given UUID, only one device with that UUID may be running at the same time. However,
it is possible to define multiple devices with the same UUID under different parent
devices. Therefore, it is sometimes necessary to specify the parent device alongside the
UUID to uniquely identify a device.
EXIT STATUS
On success, 0 is returned, a non-zero failure code otherwise.
EXAMPLES
List running mdev devices:
# mdevctl list
85006552-1b4b-45ef-ad62-de05be9171df 0000:00:02.0 i915-GVTg_V4_4
83c32df7-d52e-4ec1-9668-1f3c7e4df107 0000:00:02.0 i915-GVTg_V4_8 (defined)
List defined mdev devices:
# mdevctl list -d
83c32df7-d52e-4ec1-9668-1f3c7e4df107 0000:00:02.0 i915-GVTg_V4_8 auto
b0a3989f-8138-4d49-b63a-59db28ec8b48 0000:00:02.0 i915-GVTg_V4_8 auto
5cf14a12-a437-4c82-a13f-70e945782d7b 0000:00:02.0 i915-GVTg_V4_4 manual
List mdev types supported on the host system:
# mdevctl types
0000:00:02.0
i915-GVTg_V4_2
Available instances: 1
Device API: vfio-pci
Description: low_gm_size: 256MB high_gm_size: 1024MB fence: 4 resolution: 1920x1200 weight: 8
i915-GVTg_V4_1
Available instances: 0
Device API: vfio-pci
Description: low_gm_size: 512MB high_gm_size: 2048MB fence: 4 resolution: 1920x1200 weight: 16
i915-GVTg_V4_8
Available instances: 4
Device API: vfio-pci
Description: low_gm_size: 64MB high_gm_size: 384MB fence: 4 resolution: 1024x768 weight: 2
i915-GVTg_V4_4
Available instances: 3
Device API: vfio-pci
Description: low_gm_size: 128MB high_gm_size: 512MB fence: 4 resolution: 1920x1200 weight: 4
Modify a defined device from automatic start to manual:
# mdevctl modify --uuid 83c32df7-d52e-4ec1-9668-1f3c7e4df107 --manual
# mdevctl list -d
83c32df7-d52e-4ec1-9668-1f3c7e4df107 0000:00:02.0 i915-GVTg_V4_8 manual
b0a3989f-8138-4d49-b63a-59db28ec8b48 0000:00:02.0 i915-GVTg_V4_8 auto
5cf14a12-a437-4c82-a13f-70e945782d7b 0000:00:02.0 i915-GVTg_V4_4 manual
Stop a running mdev device:
# mdevctl stop -u 83c32df7-d52e-4ec1-9668-1f3c7e4df107
Start an mdev device that is not defined:
# uuidgen
6eba5b41-176e-40db-b93e-7f18e04e0b93
# mdevctl start -u 6eba5b41-176e-40db-b93e-7f18e04e0b93 -p 0000:00:02.0 --type i915-GVTg_V4_1
# mdevctl list
85006552-1b4b-45ef-ad62-de05be9171df 0000:00:02.0 i915-GVTg_V4_4
6eba5b41-176e-40db-b93e-7f18e04e0b93 0000:00:02.0 i915-GVTg_V4_1
Promote the new created mdev to a defined device:
# mdevctl define --uuid 6eba5b41-176e-40db-b93e-7f18e04e0b93
# mdevctl list -d
83c32df7-d52e-4ec1-9668-1f3c7e4df107 0000:00:02.0 i915-GVTg_V4_8 manual
6eba5b41-176e-40db-b93e-7f18e04e0b93 0000:00:02.0 i915-GVTg_V4_1 manual
b0a3989f-8138-4d49-b63a-59db28ec8b48 0000:00:02.0 i915-GVTg_V4_8 auto
5cf14a12-a437-4c82-a13f-70e945782d7b 0000:00:02.0 i915-GVTg_V4_4 manual
ADVANCED EXAMPLES (ATTRIBUTES AND JSON)
# mdevctl list -d
783e6dbb-ea0e-411f-94e2-717eaad438bf matrix vfio_ap-passthrough manual
Add some attributes:
# mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_adapter --value=5
# mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_adapter --value=6
# mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_domain --value=0xab
# mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_control_domain --value=0xab
# mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_domain --value=4
# mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_control_domain --value=4
# mdevctl list -dv
783e6dbb-ea0e-411f-94e2-717eaad438bf matrix vfio_ap-passthrough manual
Attrs:
@{0}: {"assign_adapter":"5"}
@{1}: {"assign_adapter":"6"}
@{2}: {"assign_domain":"0xab"}
@{3}: {"assign_control_domain":"0xab"}
@{4}: {"assign_domain":"4"}
@{5}: {"assign_control_domain":"4"}
Dump the JSON configuration:
# mdevctl list -d -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --dumpjson
{
"mdev_type": "vfio_ap-passthrough",
"start": "manual",
"attrs": [
{
"assign_adapter": "5"
},
{
"assign_adapter": "6"
},
{
"assign_domain": "0xab"
},
{
"assign_control_domain": "0xab"
},
{
"assign_domain": "4"
},
{
"assign_control_domain": "4"
}
]
}
Remove some attributes:
# mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --delattr --index=5
# mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --delattr --index=4
# mdevctl list -dv
783e6dbb-ea0e-411f-94e2-717eaad438bf matrix vfio_ap-passthrough manual
Attrs:
@{0}: {"assign_adapter":"5"}
@{1}: {"assign_adapter":"6"}
@{2}: {"assign_domain":"0xab"}
@{3}: {"assign_control_domain":"0xab"}
Define an mdev device from a file:
# cat vfio_ap_device.json
{
"mdev_type": "vfio_ap-passthrough",
"start": "manual",
"attrs": [
{
"assign_adapter": "5"
},
{
"assign_domain": "0x47"
},
{
"assign_domain": "0xff"
}
]
}
# mdevctl define -p matrix --jsonfile vfio_ap_device.json
e2e73122-cc39-40ee-89eb-b0a47d334cae
# mdevctl list -dv
783e6dbb-ea0e-411f-94e2-717eaad438bf matrix vfio_ap-passthrough manual
Attrs:
@{0}: {"assign_adapter":"5"}
@{1}: {"assign_adapter":"6"}
@{2}: {"assign_domain":"0xab"}
@{3}: {"assign_control_domain":"0xab"}
e2e73122-cc39-40ee-89eb-b0a47d334cae matrix vfio_ap-passthrough manual
Attrs:
@{0}: {"assign_adapter":"5"}
@{1}: {"assign_domain":"0x47"}
@{2}: {"assign_domain":"0xff"}
CONFIGURATION FILE FORMAT
Configuration files are in JSON. Attributes in "attrs" are optional.
{
"mdev_type": "TYPE",
"start": "auto|manual",
"attrs": [
{
"attribute0": "VALUE"
},
{
"attribute1": "VALUE"
}
]
}
INVOKING EXTERNAL SCRIPTS FOR DEVICE EVENTS
mdevctl supports invoking external scripts to handle additional device type-specific
configurations and to broadcast notifications regarding changes or updates to a device.
These scripts are invoked before, after, and/or during mdevctl's "primary command
execution" (e.g. writing the device configuration file for define, or activating a device
for start).
Essentially, the procedure in mdevctl looks like this:
• command-line parsing & setup
• invoke live-command call-out [1]
• invoke pre-command call-out
• primary command execution [2]
• invoke post-command call-out [2]
• invoke notifier
[1] executed only if live update is requested.
[2] skipped if step invoke pre-command call-out fails.
EVENT SCRIPTS
A call-out or notification event invokes a script along with a set of parameters detailing
the type of call-out, mdevctl's command execution progress, and the mediated device. The
parameters are as follows:
<CONFIG> | SCRIPT <-t=type -e=event -a=action -s=state -u=UUID -p=parent>
CONFIG The device's JSON configuration, provided via standard input.
-t=type
The device type.
-e=event
Event type of call-out that is invoked. For call-out scripts, this may be pre,
live, post, or get. For notification scripts, this will always be notify.
-a=action
An action synonymous with an mdevctl command (e.g. define, start).
-s=state
A trinary state of the mdevctl command execution. The possibilities are none if the
mdevctl command has yet to execute, success if the mdevctl command completed
successfully, or failure if there was a problem executing the mdevctl command.
-u=UUID
UUID of the mediated device.
-p=parent
Parent of the mediated the device.
CALL-OUT EVENT SCRIPTS
A call-out event script is invoked during a live, pre, post or get event. mdevctl will
attempt each script stored in the mdevctl callouts directory until either a script that
satisfies the device type is found or all scripts have been attempted. A device script
must check the "TYPE" parameter to ensure the specified device type is supported,
otherwise error code 2 should be returned. If no script is found for the specified device
type, then mdevctl will carry on as normal.
These scripts are stored in /usr/lib/mdevctl/scripts.d/callouts. The same script is
invoked for live, pre, post, and get call-out events for the device type.
Live-Command
A live-command call-out event is invoked once before the pre-command call-out event
execution. This only occurs if the live option is specified on the modify command and
the device modified is active. Event type is live. State will always be none.
If the live command line option is specified any non-zero return code results in a live
modification failure except for all call-outs return with return code 2 resulting in a
live update not supported information. The return code is disruptive if also the
option defined is provided and will prevent the update of the defined device
configuration.
A notification event will follow if the live command line option is specified.
This event is only supported for the modify command.
Pre-Command
A pre-command call-out event is invoked once prior to primary command execution. Event
type is pre. State will always be none.
Any non-zero return code (exempting 2) will prevent mdevctl from performing the primary
command execution and mdevctl will abort early.
A notification event will follow only if an error code (exempting 2) is observed.
This event is not supported for the list, types, or version commands.
Post-Command
A post-command call-out event is invoked once after primary command execution. Event
type is post. State will be success if mdevctl was able to finish primary command
execution successfully, or failure otherwise.
The same script used for the pre event is used for the post event.
Any return code is non-disruptive.
A notification event will always follow a post-command call-out.
This event is not supported for the list, types, or version commands.
Get-attributes
A get event is invoked during a define and list command to acquire device attributes
from an active device. Event type is get. Action is attributes. State is none. Note
that, unlike other call-outs events, get-attributes does not expect a device config on
stdin, and an array of JSON formatted device attributes is returned via stdout.
The same script used for the pre event is used for the get event. If the script is not
designed to support a get event, then the return code is 0.
For define, a non-zero return code (exempting 2) will disrupt the define command
entirely.
For list, any return code is non-disruptive.
A script must return a JSON formatted array of device attributes on standard output.
Example:
[
{
"attribute0": "VALUE"
},
{
"attribute1": "VALUE"
}
]
Get-capabilities
A get event is invoked on every new mdevctl execution to find a matching script
supporting versioning for the device type. Event type is get. Action is capabilities.
State is none. Note that, unlike other call-outs events, get-capabilities provides a
versioning JSON on stdin, and expects a versioning JSON is returned via stdout. The
provided JSON on stdin explains in provides which actions and events mdevctl supports.
The information is offered to the script to derive its supported actions and events
from but it there is no obligation for scripts to follow this pattern. A valid
versioning JSON response provides in supports the supported actions in actions and the
supported events in events.
If a valid versioning JSON is returned on stdout by the script and the return code is
NOT 2 the script is considered a positive match for the provided device type. A script
providing versioning is the primary choice for a device type when mdevctl is executing
callouts or in other words if a script which supports versioning is found the script is
used for every event and action for the device type. Should no versioning supporting
script be found the none versioning search pattern is used.
A script is provided on standard in with a versioning JSON describing the mdevctl
supported version, actions and events. Example:
{
"provides": {
"version": 1,
"actions": [
"start",
"stop",
"define",
"undefine",
"modify",
"attributes",
"capabilities"
],
"events": [
"pre",
"post",
"notify",
"get"
]
}
}
A script that wants to support versioning must return a versioning JSON on standard
output. The script should list all supported actions in the actions array and all
supported events in the events array. It is possible to add additional actions or
events in the array but if mdevctl did not have these in the arrays in provides they
are ignored. Example:
{
"supports": {
"version": 1,
"actions": [
"start",
"stop",
"define",
"undefine",
"modify",
"attributes",
"capabilities"
],
"events": [
"pre",
"post",
"notify",
"get"
]
}
}
AUTO-START CALL-OUTS
For each device set to start automatically during system boot, mdevctl will invoke the pre
and post events. Action is the string start.
Return code and notification event behavior is the same as documented for the pre and post
events. Errors reported by a script will disrupt the auto-start for that particular device
and the message will be reported to the system log before attempting to the next
auto-start device.
Note that if a notification script is used to convey information to another program or
daemon during the auto-start procedure, it is not guaranteed that the program will already
be active prior to mdevctl's invocation (e.g. the auto-start event may occur before the
libvirt daemon is activated).
NOTIFICATION EVENT SCRIPTS
Notification event scripts may be used to signal the state of the mediated device or the
state of an mdevctl command to other programs or loggers. Unlike call-out scripts,
notifier scripts are device-type agnostic.
Notify
A notification event is invoked once either following a pre-command call-out failure or
after a post-command call-out. Event is notify. If following a pre event, then state
will be none. If following a post event, then state will mirror the value passed to the
post-command call-out.
These scripts are stored in /usr/lib/mdevctl/scripts.d/notifiers. All notification
scripts will be invoked during a notification event.
A non-zero return code is ignored.
This event is not supported for the list, types, or version commands.
SCRIPT RETURN VALUES
A call-out script should return one of the following values:
• 0 if OK,
• 1 if an error occurred,
• 2 if the script does not support the device type
FILES
/etc/mdevctl.d/*
Configuration files are in one subdirectory per parent device and named by UUID.
/usr/lib/mdevctl/scripts.d/callouts/*
Scripts for pre/post/get call-out events. NOTE: these scripts were previously located at
/etc/mdevctl.d/scripts.d/callouts/*, but that location is now deprecated.
/usr/lib/mdevctl/scripts.d/notifiers/*
Scripts for notification call-out events. NOTE: these scripts were previously located at
/etc/mdevctl.d/scripts.d/notifiers/*, but that location is now deprecated.
SEE ALSO
udev(7), udevadm(8), driverctl(8)
MDEVCTL(8)