Provided by: openvswitch-switch_3.3.0-1ubuntu3_amd64 bug

NAME

       ovs-ctl - OVS startup helper script

SYNOPSIS

       ovs-ctl --system-id=random|<uuid> [<options>] start

       ovs-ctl stop

       ovs-ctl --system-id=random|<uuid> [<options>] restart

       ovs-ctl status

       ovs-ctl version

       ovs-ctl [<options>] load-kmod

       ovs-ctl --system-id=random|<uuid> [<options>] force-reload-kmod

       ovs-ctl [--protocol=<protocol>] [--sport=<sport>] [--dport=<dport>] enable-protocol

       ovs-ctl delete-transient-ports

       ovs-ctl help | -h | --help

       ovs-ctl --version

DESCRIPTION

       The  ovs-ctl  program starts, stops, and checks the status of Open vSwitch daemons.  It is
       not meant to be invoked directly by system administrators but to be called  internally  by
       system startup scripts.

       Each ovs-ctl command is described separately below.

   The start command
       The start command starts Open vSwitch.  It performs the following tasks:

       1. Loads  the  Open  vSwitch kernel module.  If this fails, and the Linux bridge module is
          loaded but no bridges exist, it tries to unload the bridge module and tries loading the
          Open  vSwitch  kernel  module  again.   (This is because the Open vSwitch kernel module
          cannot coexist with the Linux bridge module before 2.6.37.)

       The start command skips the following steps if ovsdb-server is already running:

       2. If the Open vSwitch database file does not exist, it creates it.  If the database  does
          exist, but it has an obsolete version, it upgrades it to the latest schema.

       3. Starts ovsdb-server, unless the --no-ovsdb-server command option is given.

       4. Initializes a few values inside the database.

       5. If the --delete-bridges option was used, deletes all of the bridges from the database.

       6. If   the  --delete-transient-ports  option  was  used,  deletes  all  ports  that  have
          other_config:transient set to true.

       The start command skips the following step if ovs-vswitchd is already running, or  if  the
       --no-ovs-vswitchd command option is given:

       7. Starts ovs-vswitchd.

   Options
       Several  command-line  options  influence  the start command’s behavior.  Some form of the
       following option should ordinarily be specified:

       • --system-id=<uuid> or --system-id=random

         This specifies a unique system identifier to store into  external-ids:system-id  in  the
         database’s  Open_vSwitch  table.  Remote managers that talk to the Open vSwitch database
         server over network protocols use this value to identify and  distinguish  Open  vSwitch
         instances, so it should be unique (at least) within OVS instances that will connect to a
         single controller.

         When random is specified, ovs-ctl will generate a random ID that persists from  one  run
         to  another  (stored  in  a  file).   When  another  string is specified ovs-ctl uses it
         literally.

       The following options should be specified if the defaults are not suitable:

       • --system-type=<type> or --system-version=<version>

         Sets the value to store in the system-type and system-version columns, respectively,  in
         the  database’s  Open_vSwitch table.  Remote managers may use these values too determine
         the kind of system  to  which  they  are  connected  (primarily  for  display  to  human
         administrators).

         When  not  specified,  ovs-ctl  uses  values  from  the  optional  system-type.conf  and
         system-version.conf files (see Files) or it uses the lsb_release program, if present, to
         provide reasonable defaults.

       The following options are also likely to be useful:

       • --external-id="<name>=<value>"

         Sets  external-ids:<name>  to  <value> in the database’s Open_vSwitch table.  Specifying
         this option multiple times adds multiple key-value pairs.

       • --delete-bridges

         Ordinarily Open vSwitch bridges persist from one system boot to the next, as long as the
         database is preserved.  Some environments instead expect to re-create all of the bridges
         and other configuration state on every boot.  This option supports that, by deleting all
         Open vSwitch bridges after starting ovsdb-server but before starting ovs-vswitchd.

       • --delete-transient-ports

         Deletes  all  ports  that have other_config:transient set to true.  This is important on
         certain environments where some ports are going to be recreated after reboot, but  other
         ports need to be persisted in the database.

       • --ovs-user=user[:group]

         Ordinarily  Open  vSwitch  daemons are started as the user invoking the ovs-ctl command.
         Some system administrators would prefer to have the various daemons spawn  as  different
         users  in  their  environments.   This  option  allows  passing the --user option to the
         ovsdb-server and ovs-vswitchd daemons, allowing them to change their privilege levels.

       The following options are less important:

       • --no-monitor

         By default ovs-ctl passes --monitor to ovs-vswitchd and ovsdb-server, requesting that it
         spawn  a  process  monitor  which  will  restart  the daemon if it crashes.  This option
         suppresses that behavior.

       • --daemon-cwd=<directory>

         Specifies the current working directory that the  OVS  daemons  should  run  from.   The
         default  is  /  (the  root  directory) if this option is not specified.  (This option is
         useful because most systems create core files in a process’s current  working  directory
         and because a file system that is in use as a process’s current working directory cannot
         be unmounted.)

       • --no-force-corefiles

         By default, ovs-ctl enables core dumps for the OVS daemons.  This option  disables  that
         behavior.

       • --no-mlockall

         By default ovs-ctl passes --mlockall to ovs-vswitchd, requesting that it lock all of its
         virtual memory, preventing it from being paged to disk.   This  option  suppresses  that
         behavior.

       • --no-self-confinement

         Disable  self-confinement  for  ovs-vswitchd and ovsdb-server daemons.  This flag may be
         used when, for example, OpenFlow controller creates its Unix Domain Socket  outside  OVS
         run  directory  and  OVS needs to connect to it.  It is better to stick with the default
         behavior and not to use this flag, unless:

         • You have Open vSwitch running under SELinux or AppArmor Mandatory Access Control  that
           would prevent OVS from messing with sockets outside ordinary OVS directories.

         • You  believe  that relying on protocol handshakes (e.g. OpenFlow) is enough to prevent
           OVS to adversely interact with other daemons running on your system.

         • You don’t have much worries of remote OVSDB exploits  in  the  first  place,  because,
           perhaps,  OVSDB  manager  is  running on the same host as OVS and share similar attack
           vectors.

       • --ovsdb-server-priority=<niceness> or --ovs-vswitchd-priority=<niceness>

         Sets the nice(1) level used for each daemon.  All of them default to -10.

       • --ovsdb-server-wrapper=<wrapper> or --ovs-vswitchd-wrapper=<wrapper>

         Configures the specified daemon to run under <wrapper>, which is one of the following:

         • valgrind:  Run  the  daemon  under  valgrind(1),  if  it  is  installed,  logging   to
           <daemon>.valgrind.log.<pid> in the log directory.

         • strace:   Run   the   daemon   under   strace(1),  if  it  is  installed,  logging  to
           <daemon>.strace.log.<pid> in the log directory.

         • glibc: Enable GNU C library features designed to find memory errors.

         By default, no wrapper is used.

         Each of the wrappers can expose bugs in Open vSwitch that lead to  incorrect  operation,
         including  crashes.   The valgrind and strace wrappers greatly slow daemon operations so
         they should not be used in production.  They  also  produce  voluminous  logs  that  can
         quickly  fill  small  disk partitions.  The glibc wrapper is less resource-intensive but
         still somewhat slows the daemons.

       The following options control file locations.  They should only be  used  if  the  default
       locations cannot be used.  See FILES, below, for more information.

       • --db-file=<file>

         Overrides the file name for the OVS database.

       • --db-sock=<socket>

         Overrides the file name for the Unix domain socket used to connect to ovsdb-server.

       • --db-schema=<schema>

         Overrides the file name for the OVS database schema.

       • --extra-dbs=<file>

         Adds   <file>   as   an   extra  database  for  ovsdb-server  to  serve  out.   Multiple
         space-separated file names may also be specified.  <file> should begin  with  /;  if  it
         does not, then it will be taken as relative to <dbdir>.

   The stop command
       The  stop command stops the ovs-vswitchd and ovsdb-server daemons.  It does not unload the
       Open vSwitch kernel modules. It can take the same --no-ovsdb-server and  --no-ovs-vswitchd
       options as that of the start command.

       This command does nothing and finishes successfully if the OVS daemons aren’t running.

   The restart command
       The restart command performs a stop followed by a start command.  The command can take the
       same options as that of the start command. In addition, it  saves  and  restores  OpenFlow
       flows for each individual bridge.

   The status command
       The  status  command  checks  whether  the  OVS  daemons ovs-vswitchd and ovsdb-server are
       running and prints messages with that information.  It exits with status 0 if the  daemons
       are running, 1 otherwise.

   The version command
       The version command runs ovsdb-server --version and ovs-vswitchd --version.

   The force-reload-kmod command
       The  force-reload-kmod  command  allows  upgrading  the Open vSwitch kernel module without
       rebooting.  It performs the following tasks:

       1. Gets a list of OVS “internal” interfaces, that is, network devices implemented by  Open
          vSwitch.  The most common examples of these are bridge “local ports”.

       2. Saves the OpenFlow flows of each bridge.

       3. Stops the Open vSwitch daemons, as if by a call to ovs-ctl stop.

       4. Saves  the  kernel configuration state of the OVS internal interfaces listed in step 1,
          including IP and IPv6 addresses and routing table entries.

       5. Unloads the Open vSwitch kernel module (including the bridge compatibility module if it
          is loaded).

       6. Starts  OVS back up, as if by a call to ovs-ctl start.  This reloads the kernel module,
          restarts the OVS daemons and finally restores the saved OpenFlow flows.

       7. Restores the kernel configuration state that was saved in step 4.

       8. Checks for daemons that may need to be restarted because they have packet sockets  that
          are  listening on old instances of Open vSwitch kernel interfaces and, if it finds any,
          prints a warning on stdout.  DHCP is a common  example:  if  the  ISC  DHCP  client  is
          running  on  an  OVS  internal  interface,  then  it  will  have  to be restarted after
          completing the above procedure.  (It would be nice if  ovs-ctl  could  restart  daemons
          automatically,  but  the  details are far too specific to a particular distribution and
          installation.)

       force-kmod-reload internally stops and starts OVS,  so  it  accepts  all  of  the  options
       accepted by the start command except for the --no-ovs-vswitchd option.

   The load-kmod command
       The load-kmod command loads the openvswitch kernel modules if they are not already loaded.
       This operation also occurs as part of the start command.  The motivation for providing the
       load-kmod  command  is  to allow errors when loading modules to be handled separately from
       other errors that may occur when running the start command.

       By default the load-kmod command attempts to load the openvswitch kernel module.

   The enable-protocol command
       The enable-protocol command checks for rules  related  to  a  specified  protocol  in  the
       system’s  iptables(8)  configuration.   If there are no rules specifically related to that
       protocol, then it inserts a rule to accept the specified protocol.

       More specifically:

       • If iptables is not installed or not enabled, this command does  nothing,  assuming  that
         lack of filtering means that the protocol is enabled.

       • If  the  INPUT  chain  has a rule that matches the specified protocol, then this command
         does  nothing,  assuming  that  whatever  rule  is   installed   reflects   the   system
         administrator’s decisions.

       • Otherwise, this command installs a rule that accepts traffic of the specified protocol.

       This  command  normally completes successfully, even if it does nothing.  Only the failure
       of an attempt to insert a rule normally causes it to return an exit code other than 0.

       The following options control the protocol to be enabled:

       • --protocol=<protocol>

         The name of the IP protocol to be enabled, such as gre or tcp.  The default is gre.

       • --sport=<sport> or --dport=<dport>

         TCP or UDP source or destination port to match.  These are  optional  and  allowed  only
         with --protocol=tcp or --protocol=udp.

   The delete-transient-ports command
       Deletes all ports that have the other_config:transient value set to true.

   The help command
       Prints a usage message and exits successfully.

OPTIONS

       In  addition  to  the  options  listed  for  each command above, these options control the
       behavior of several ovs-ctl commands.

       By default, ovs-ctl controls the ovsdb-server and  ovs-vswitchd  daemons.   The  following
       options restrict that control to exclude one or the other:

       • --no-ovsdb-server

         Specifies  that  the  ovs-ctl  commands  start,  stop, and restart should not modify the
         running status of ovsdb-server.

       • --no-ovs-vswitchd

         Specifies that the ovs-ctl commands start, stop,  and  restart  should  not  modify  the
         running  status  of  ovs-vswitchd.   It  is  an  error  to  include this option with the
         force-reload-kmod command.

EXIT STATUS

       ovs-ctl exits with status 0 on success and nonzero  on  failure.   The  start  command  is
       considered to succeed if OVS is already started; the stop command is considered to succeed
       if OVS is already stopped.

ENVIRONMENT

       The following environment variables affect ovs-ctl:

       • PATH

         ovs-ctl does not hardcode the location of any of the programs  that  it  runs.   ovs-ctl
         will  add  the  <sbindir> and <bindir> that were specified at configure time to PATH, if
         they are not already present.

       • OVS_LOGDIR,   OVS_RUNDIR,   OVS_DBDIR,   OVS_SYSCONFDIR,   OVS_PKGDATADIR,   OVS_BINDIR,
         OVS_SBINDIR

         Setting  one  of  these  variables in the environment overrides the respective configure
         option, both for ovs-ctl itself and for the other Open vSwitch programs that it runs.

FILES

       ovs-ctl uses the following files:

       • ovs-lib

         Shell function library used internally by ovs-ctl.  It must be  installed  in  the  same
         directory as ovs-ctl.

       • <logdir>/<daemon>.log

         Per-daemon logfiles.

       • <rundir>/<daemon>.pid

         Per-daemon pidfiles to track whether a daemon is running and with what process ID.

       • <pkgdatadir>/vswitch.ovsschema

         The  OVS  database  schema  used to initialize the database (use --db-schema to override
         this location).

       • <dbdir>/conf.db

         The OVS database (use --db-file to override this location).

       • <rundir>/openvswitch/db.sock

         The Unix domain socket used for local communication with ovsdb-server (use --db-sock  to
         override this location).

       • <sysconfdir>/openvswitch/system-id.conf

         The persistent system UUID created and read by --system-id=random.

       • <sysconfdir>/openvswitch/system-type.conf                                            and
         <sysconfdir>/openvswitch/system-version.conf

         The system-type and system-version values stored in the  database’s  Open_vSwitch  table
         when not specified as a command-line option.

EXAMPLE

       The  file debian/openvswitch-switch.init in the Open vSwitch source distribution is a good
       example of how to use ovs-ctl.

SEE ALSO

       README.rst, ovsdb-server(8), ovs-vswitchd(8).

AUTHOR

       The Open vSwitch Development Community

COPYRIGHT

       2016-2024, The Open vSwitch Development Community