Provided by: partclone_0.3.27+repack-2build2_amd64 bug

NAME

       partclone - The utility for clone and restore a partition.

SYNOPSIS

       partclone.[fstype] {[-c | --clone] [-r | --restore] [-b | --dev-to-dev]}
                          {[-s | --source] source} {[[-o | --output] [-O | --overwrite]] target}
                          [[-dX | --debug=X] [--restore_raw_file] [-z | --buffer_size] [-N | --ncurses] [-q | --quiet] [-f | --UI-fresh] [-F | --force] [-I | --ignore_fschk] [-i | --ignore_crc] [-C | --nocheck] [-R | --rescue] [-L | --logfile] logfile [-R | --rescue] [-L | --logfile] logfile [-X | --compresscmd] [-D | --domain] [--offset_domain] [-aX | --checksum-mode=X] [-kX | --blocks-per-checksum=X] [-K | --no-reseed] [-w | --skip_write_error] [-E | --offset=X] [-T | --btfiles] [-t | --btfiles_torrent] [-n | --note] [-B | --no_block_detail] [--write-direct-io] [--read-direct-io]]

DESCRIPTION

       partclone.[fstype] is a part of Partclone project. Partclone provide utilities to backup
       used blocks and design for higher compatibility of the file system by using existing
       library, e.g. e2fslibs is used to read the used block of ext2 partition.

       Partclone supported file system include btrfs, ext2, ext3, ext4, reiserfs, reiser4, xfs
       and jfs for LINUX. Also support some non-linux operation system, ex: NTFS, FAT and EXFAT
       (for Windows), HFS plus (APPLE MAC OS), UFS2 (FreeBSD), VMFS (VMWare Vsphere) and MINIX
       (MINIX3).

       All partclone utils could be run like partclone.[fstype] is very smiliar fsck or mkfs. For
       example, for backup/restore hfsplus, just run partclone.hfsp

                  File System                 partclone.[fstype]

                  btrfs                       partclone.btrfs
                  ext2, ext3, ext4            partclone.[ext2 | ext3 | ext4]
                  reiserfs 3.5                partclone.reiserfs
                  reiser 4                    partclone.reiser4
                  xfs                         partclone.xfs
                  ufs | ufs2                  partclone.ufs
                  jfs                         partclone.jfs
                  hfs plusfs                  partclone.[hfs+ | hfsplus]
                  vmfs                        partclone.[vmfs | vmfs5]
                  ntfs                        partclone.ntfs
                  fat12, fat16, fat32         partclone.[fat12 | fat16 | fat32]
                  exfat                       partclone.exfat
                  minix                       partclone.minix
                  f2fs                        partclone.f2fs
                  nilfs2                      partclone.nilfs2
                  apfs                        partclone.apfs
                  others (Not Supported FS)   partclone.imager

OPTIONS

       The program follows the usual GNU command line syntax, with long options starting with two
       dashes (`-'). A summary of options is included below.

       -s FILE, --source FILE
           Source FILE. The FILE could be a image file (made by partclone) or device depend on
           your action. Normally, backup source is device, restore source is image file.

           Receving data from pipe line is supported ONLY for restoring, just ignore -s option or
           use '-' means receive data from stdin.

       -o FILE, --output FILE
           Output FILE. The FILE could be a image file (partclone will generate) or device depend
           on your action. Normally, backup output to image file and restore output to device.

           Sending data to pipe line is also supported ONLY for back-up, just ignore -o option or
           use '-' means send data to stdout.

       -O FILE, --overwrite FILE
           Overwrite FILE, overwriting if exists.

       -c, --clone
           Save partition to the special image format.

       -r, --restore
           Restore partition from the special image format.

       -b, --dev-to-dev
           Local device to device copy on-the-fly, source and output both are device.

       -D, --domain
           Create GNU Ddrescue domain log file from source device. This is a human readable file
           in which + marks used block areas and ? marks free areas.

       --offset_domain=X
           Add X (in bytes) to all positions reported in the domain log file

       --restore_raw_file
           Creating special raw file for loop device.

       -L FILE, --logfile FILE
           put special path to record partclone log information. (default /var/log/partclone.log)

       -R, --rescue
           Continue after disk read errors.

       -C, --no_check
           Don't check device size and free space.

       -N, --ncurses
           Using Ncurses Text User Interface.

       -I, --ignore_fschk
           Ignore filesystem check.

       -i, --ignore_crc
           Ignore crc check error.

       -F, --force
           Force progress.

       -f sec, --UI-fresh sec
           put special second to different interval.

       -z size, --buffer_size size
           Read/write buffer size (default: 1048576)

       -q, --quiet
           Disable progress message.

       -dlevel, --debug level
           Set the debug level [1|2|3]

       -x, --compresscmd CMD
           Start CMD as an output pipe to compress the cloned image

       -aX, --checksum-mode=X
           Checksum formula to use to add error detection

           where X:

           0: No checksum (no slowdown, smallest image)

           1: CRC32 (Fast to compute, basic detection)

       -kX, --blocks-per-checksum=X
           Write one checksum for every X blocks

       -w, --skip_write_error
           Continue restore while write errors

       --write-direct-io
           Writing data to TARGET partition without cache

       --read-direct-io
           Reading data from SOURCE partition without cache

       -B, --no_block_detail
           Show progress message without block detail

       -E, --offset=X
           Add offset X (bytes) to OUTPUT

       -T, --btfiles
           Restore block as file for ClonezillaBT.

       -t, --btfiles_torrent
           Restore block as file for ClonezillaBT but only generate torrent.

       -n, --note NOTE
           Display Message Note (128 words).

       -h, --help
           Show summary of options.

       -v, --version
           Show version of program.

FILES

       /var/log/partclone.log
           The log file of partclone

EXAMPLES

            clone /dev/hda1 to hda1.img and display debug information.
              partclone.ext3 -c -d -s /dev/hda1 -o hda1.img

            restore /dev/hda1 from hda1.img and display debug information.
              partclone.extfs -r -d -s hda1.img -o /dev/hda1

            restore image from clonezilla (split, gzip,) with stdin source
              cat sda1.ext3-ptcl-img.gz.a* | gunzip -c | partclone.ext3 -d -r -s - -o /dev/sda1

DIAGNOSTICS

       The following diagnostics may be issued on stderr:

       partclone provides some return codes, that can be used in scripts:

       Code   Diagnostic
       0      Program exited successfully.
       1      Clone or Restore seem failed.

BUGS

       Report bugs to thomas@clonezilla.org or http://partclone.org.

       You can get support at http://partclone.org

SEE ALSO

       partclone(8), partclone.chkimg(8), partclone.restore(8), partclone.dd(8),
       partclone.info(8)

AUTHOR

       Yu-Chin Tsai <thomas@clonezilla.org>

COPYRIGHT

       Copyright © 2007 Yu-Chin Tsai

       This manual page was written for the Debian system (and may be used by others).

       Permission is granted to copy, distribute and/or modify this document under the terms of
       the GNU General Public License, Version 2 or (at your option) any later version published
       by the Free Software Foundation.

       On Debian systems, the complete text of the GNU General Public License can be found in
       /usr/share/common-licenses/GPL.