Provided by: sanlock_3.8.5-2build3_amd64 
NAME
sanlock - shared storage lock manager
SYNOPSIS
sanlock [COMMAND] [ACTION] ...
DESCRIPTION
sanlock is a lock manager built on shared storage. Hosts with access to the storage can perform locking.
An application running on the hosts is given a small amount of space on the shared block device or file,
and uses sanlock for its own application-specific synchronization. Internally, the sanlock daemon
manages locks using two disk-based lease algorithms: delta leases and paxos leases.
• delta leases are slow to acquire and demand regular i/o to shared storage. sanlock only uses them
internally to hold a lease on its "host_id" (an integer host identifier from 1-2000). They prevent two
hosts from using the same host identifier. The delta lease renewals also indicate if a host is alive.
("Light-Weight Leases for Storage-Centric Coordination", Chockler and Malkhi.)
• paxos leases are fast to acquire and sanlock makes them available to applications as general purpose
resource leases. The disk paxos algorithm uses host_id's internally to represent different hosts, and
the owner of a paxos lease. delta leases provide unique host_id's for implementing paxos leases, and
delta lease renewals serve as a proxy for paxos lease renewal. ("Disk Paxos", Eli Gafni and Leslie
Lamport.)
Externally, the sanlock daemon exposes a locking interface through libsanlock in terms of "lockspaces"
and "resources". A lockspace is a locking context that an application creates for itself on shared
storage. When the application on each host is started, it "joins" the lockspace. It can then create
"resources" on the shared storage. Each resource represents an application-specific entity. The
application can acquire and release leases on resources.
To use sanlock from an application:
• Allocate shared storage for an application, e.g. a shared LUN or LV from a SAN, or files from NFS.
• Provide the storage to the application.
• The application uses this storage with libsanlock to create a lockspace and resources for itself.
• The application joins the lockspace when it starts.
• The application acquires and releases leases on resources.
How lockspaces and resources translate to delta leases and paxos leases within sanlock:
Lockspaces
• A lockspace is based on delta leases held by each host using the lockspace.
• A lockspace is a series of 2000 delta leases on disk, and requires 1MB of storage. (See Storage below
for size variations.)
• A lockspace can support up to 2000 concurrent hosts using it, each using a different delta lease.
• Applications can i) create, ii) join and iii) leave a lockspace, which corresponds to i) initializing
the set of delta leases on disk, ii) acquiring one of the delta leases and iii) releasing the delta
lease.
• When a lockspace is created, a unique lockspace name and disk location is provided by the application.
• When a lockspace is created/initialized, sanlock formats the sequence of 2000 on-disk delta lease
structures on the file or disk, e.g. /mnt/leasefile (NFS) or /dev/vg/lv (SAN).
• The 2000 individual delta leases in a lockspace are identified by number: 1,2,3,...,2000.
• Each delta lease is a 512 byte sector in the 1MB lockspace, offset by its number, e.g. delta lease 1 is
offset 0, delta lease 2 is offset 512, delta lease 2000 is offset 1023488. (See Storage below for size
variations.)
• When an application joins a lockspace, it must specify the lockspace name, the lockspace location on
shared disk/file, and the local host's host_id. sanlock then acquires the delta lease corresponding to
the host_id, e.g. joining the lockspace with host_id 1 acquires delta lease 1.
• The terms delta lease, lockspace lease, and host_id lease are used interchangeably.
• sanlock acquires a delta lease by writing the host's unique name to the delta lease disk sector,
reading it back after a delay, and verifying it is the same.
• If a unique host name is not specified, sanlock generates a uuid to use as the host's name. The delta
lease algorithm depends on hosts using unique names.
• The application on each host should be configured with a unique host_id, where the host_id is an
integer 1-2000.
• If hosts are misconfigured and have the same host_id, the delta lease algorithm is designed to detect
this conflict, and only one host will be able to acquire the delta lease for that host_id.
• A delta lease ensures that a lockspace host_id is being used by a single host with the unique name
specified in the delta lease.
• Resolving delta lease conflicts is slow, because the algorithm is based on waiting and watching for
some time for other hosts to write to the same delta lease sector. If multiple hosts try to use the
same delta lease, the delay is increased substantially. So, it is best to configure applications to
use unique host_id's that will not conflict.
• After sanlock acquires a delta lease, the lease must be renewed until the application leaves the
lockspace (which corresponds to releasing the delta lease on the host_id.)
• sanlock renews delta leases every 20 seconds (by default) by writing a new timestamp into the delta
lease sector.
• When a host acquires a delta lease in a lockspace, it can be referred to as "joining" the lockspace.
Once it has joined the lockspace, it can use resources associated with the lockspace.
Resources
• A lockspace is a context for resources that can be locked and unlocked by an application.
• sanlock uses paxos leases to implement leases on resources. The terms paxos lease and resource lease
are used interchangeably.
• A paxos lease exists on shared storage and requires 1MB of space. It contains a unique resource name
and the name of the lockspace.
• An application assigns its own meaning to a sanlock resource and the leases on it. A sanlock resource
could represent some shared object like a file, or some unique role among the hosts.
• Resource leases are associated with a specific lockspace and can only be used by hosts that have joined
that lockspace (they are holding a delta lease on a host_id in that lockspace.)
• An application must keep track of the disk locations of its lockspaces and resources. sanlock does not
maintain any persistent index or directory of lockspaces or resources that have been created by
applications, so applications need to remember where they have placed their own leases (which files or
disks and offsets).
• sanlock does not renew paxos leases directly (although it could). Instead, the renewal of a host's
delta lease represents the renewal of all that host's paxos leases in the associated lockspace. In
effect, many paxos lease renewals are factored out into one delta lease renewal. This reduces i/o when
many paxos leases are used.
• The disk paxos algorithm allows multiple hosts to all attempt to acquire the same paxos lease at once,
and will produce a single winner/owner of the resource lease. (Shared resource leases are also
possible in addition to the default exclusive leases.)
• The disk paxos algorithm involves a specific sequence of reading and writing the sectors of the paxos
lease disk area. Each host has a dedicated 512 byte sector in the paxos lease disk area where it
writes its own "ballot", and each host reads the entire disk area to see the ballots of other hosts.
The first sector of the disk area is the "leader record" that holds the result of the last paxos
ballot. The winner of the paxos ballot writes the result of the ballot to the leader record (the
winner of the ballot may have selected another contending host as the owner of the paxos lease.)
• After a paxos lease is acquired, no further i/o is done in the paxos lease disk area.
• Releasing the paxos lease involves writing a single sector to clear the current owner in the leader
record.
• If a host holding a paxos lease fails, the disk area of the paxos lease still indicates that the paxos
lease is owned by the failed host. If another host attempts to acquire the paxos lease, and finds the
lease is held by another host_id, it will check the delta lease of that host_id. If the delta lease of
the host_id is being renewed, then the paxos lease is owned and cannot be acquired. If the delta lease
of the owner's host_id has expired, then the paxos lease is expired and can be taken (by going through
the paxos lease algorithm.)
• The "interaction" or "awareness" between hosts of each other is limited to the case where they attempt
to acquire the same paxos lease, and need to check if the referenced delta lease has expired or not.
• When hosts do not attempt to lock the same resources concurrently, there is no host interaction or
awareness. The state or actions of one host have no effect on others.
• To speed up checking delta lease expiration (in the case of a paxos lease conflict), sanlock keeps
track of past renewals of other delta leases in the lockspace.
Resource Index
The resource index (rindex) is an optional sanlock feature that applications can use to keep track of
resource lease offsets. Without the rindex, an application must keep track of where its resource leases
exist on disk and find available locations when creating new leases.
The sanlock rindex uses two align-size areas on disk following the lockspace. The first area holds
rindex entries; each entry records a resource lease name and location. The second area holds a private
paxos lease, used by sanlock internally to protect rindex updates.
The application creates the rindex on disk with the "format" function. Format is a disk-only operation
and does not interact with the live lockspace, so it can be called without first calling add_lockspace.
The application needs to follow the convention of writing the lockspace at the start of the device
(offset 0) and formatting the rindex immediately following the lockspace area. When formatting, the
application must set flags for sector size and align size to match those for the lockspace.
To use the rindex, the application:
• Uses the "create" function to create a new resource lease on disk. This takes the place of the
write_resource function. The create function requires the location of the rindex and the name of the
new resource lease. sanlock finds a free lease area, writes the new resource lease at that location,
updates the rindex with the name:offset, and returns the offset to the caller. The caller uses this
offset when acquiring the resource lease.
• Uses the "delete" function to remove a resource disk on disk (also corresponding to the write_resource
function.) sanlock clears the resource lease and the rindex entry for it. A subsequent call to create
may use this same disk location for a different resource lease.
• Uses the "lookup" function to discover the offset of a resource lease given the resource lease name.
The caller would typically call this prior to acquiring the resource lease.
• Uses the "rebuild" function to recreate the rindex if it is damaged or becomes inconsistent. This
function scans the disk for resource leases and creates new rindex entries to match the leases it
finds.
• The "update" function manipulates rindex entries directly and should not normally be used by the
application. In normal usage, the create and delete functions manipulate rindex entries. Update is
mainly useful for testing or repairs.
Expiration
• If a host fails to renew its delta lease, e.g. it looses access to the storage, its delta lease will
eventually expire and another host will be able to take over any resource leases held by the host.
sanlock must ensure that the application on two different hosts is not holding and using the same lease
concurrently.
• When sanlock has failed to renew a delta lease for a period of time, it will begin taking measures to
stop local processes (applications) from using any resource leases associated with the expiring
lockspace delta lease. sanlock enters this "recovery mode" well ahead of the time when another host
could take over the locally owned leases. sanlock must have sufficient time to stop all local
processes that are using the expiring leases.
• sanlock uses three methods to stop local processes that are using expiring leases:
1. Graceful shutdown. sanlock will execute a "graceful shutdown" program that the application
previously specified for this case. The shutdown program tells the application to shut down because
its leases are expiring. The application must respond by stopping its activities and releasing its
leases (or exit). If an application does not specify a graceful shutdown program, sanlock sends
SIGTERM to the process instead. The process must release its leases or exit in a prescribed amount of
time (see -g), or sanlock proceeds to the next method of stopping.
2. Forced shutdown. sanlock will send SIGKILL to processes using the expiring leases. The processes
have a fixed amount of time to exit after receiving SIGKILL. If any do not exit in this time, sanlock
will proceed to the next method.
3. Host reset. sanlock will trigger the host's watchdog device to forcibly reset it. sanlock
carefully manages the timing of the watchdog device so that it fires shortly before any other host
could take over the resource leases held by local processes.
Failures
If a process holding resource leases fails or exits without releasing its leases, sanlock will release
the leases for it automatically (unless persistent resource leases were used.)
If the sanlock daemon cannot renew a lockspace delta lease for a specific period of time (see
Expiration), sanlock will enter "recovery mode" where it attempts to stop and/or kill any processes
holding resource leases in the expiring lockspace. If the processes do not exit in time, sanlock will
force the host to be reset using the local watchdog device.
If the sanlock daemon crashes or hangs, it will not renew the expiry time of the per-lockspace
connections it had to the wdmd daemon. This will lead to the expiration of the local watchdog device,
and the host will be reset.
Watchdog
sanlock uses the wdmd(8) daemon to access /dev/watchdog. wdmd multiplexes multiple timeouts onto the
single watchdog timer. This is required because delta leases for each lockspace are renewed and expire
independently.
sanlock maintains a wdmd connection for each lockspace delta lease being renewed. Each connection has an
expiry time for some seconds in the future. After each successful delta lease renewal, the expiry time
is renewed for the associated wdmd connection. If wdmd finds any connection expired, it will not renew
the /dev/watchdog timer. Given enough successive failed renewals, the watchdog device will fire and
reset the host. (Given the multiplexing nature of wdmd, shorter overlapping renewal failures from
multiple lockspaces could cause spurious watchdog firing.)
The direct link between delta lease renewals and watchdog renewals provides a predictable watchdog firing
time based on delta lease renewal timestamps that are visible from other hosts. sanlock knows the time
the watchdog on another host has fired based on the delta lease time. Furthermore, if the watchdog
device on another host fails to fire when it should, the continuation of delta lease renewals from the
other host will make this evident and prevent leases from being taken from the failed host.
If sanlock is able to stop/kill all processing using an expiring lockspace, the associated wdmd
connection for that lockspace is removed. The expired wdmd connection will no longer block /dev/watchdog
renewals, and the host should avoid being reset.
Storage
The sector size and the align size should be specified when creating lockspaces and resources (and
rindex). The "align size" is the size on disk of a lockspace or a resource, i.e. the amount of disk
space it uses. Lockspaces and resources should use matching sector and align sizes, and must use offsets
in multiples of the align size. The max number of hosts that can use a lockspace or resource depends on
the combination of sector size and align size, shown below. The host_id of hosts using the lockspace can
be no larger than the max_hosts value for the lockspace.
Accepted combinations of sector size and align size, and the corresponding max_hosts (and max host_id)
are:
sector_size 512, align_size 1M, max_hosts 2000
sector_size 4096, align_size 1M, max_hosts 250
sector_size 4096, align_size 2M, max_hosts 500
sector_size 4096, align_size 4M, max_hosts 1000
sector_size 4096, align_size 8M, max_hosts 2000
When sector_size and align_size are not specified, the behavior matches the behavior before these sizes
could be configured: on devices which report sector size 512, 512/1M/2000 is used, on devices which
report sector size 4096, 4096/8M/2000 is used, and on files, 512/1M/2000 is always used. (Other
combinations are not compatible with sanlock version 3.6 or earlier.)
Using sanlock on shared block devices that do host based mirroring or replication is not likely to work
correctly. When using sanlock on shared files, all sanlock io should go to one file server.
Example
This is an example of creating and using lockspaces and resources from the command line. (Most
applications would use sanlock through libsanlock rather than through the command line.)
1. Allocate shared storage for sanlock leases.
This example assumes 512 byte sectors on the device, in which case the lockspace needs 1MB and each
resource needs 1MB.
The example shared block device accessible to all hosts is /dev/leases.
2. Start sanlock on all hosts.
The -w 0 disables use of the watchdog for testing.
# sanlock daemon -w 0
3. Start a dummy application on all hosts.
This sanlock command registers with sanlock, then execs the sleep command which inherits the
registered fd. The sleep process acts as the dummy application. Because the sleep process is
registered with sanlock, leases can be acquired for it.
# sanlock client command -c /bin/sleep 600 &
4. Create a lockspace for the application (from one host).
The lockspace is named "test".
# sanlock client init -s test:0:/dev/leases:0
5. Join the lockspace for the application.
Use a unique host_id on each host.
host1:
# sanlock client add_lockspace -s test:1:/dev/leases:0
host2:
# sanlock client add_lockspace -s test:2:/dev/leases:0
6. Create two resources for the application (from one host).
The resources are named "RA" and "RB". Offsets are used on the same device as the lockspace.
Different LVs or files could also be used.
# sanlock client init -r test:RA:/dev/leases:1048576
# sanlock client init -r test:RB:/dev/leases:2097152
7. Acquire resource leases for the application on host1.
Acquire an exclusive lease (the default) on the first resource, and a shared lease (SH) on the second
resource.
# export P=`pidof sleep`
# sanlock client acquire -r test:RA:/dev/leases:1048576 -p $P
# sanlock client acquire -r test:RB:/dev/leases:2097152:SH -p $P
8. Acquire resource leases for the application on host2.
Acquiring the exclusive lease on the first resource will fail because it is held by host1. Acquiring
the shared lease on the second resource will succeed.
# export P=`pidof sleep`
# sanlock client acquire -r test:RA:/dev/leases:1048576 -p $P
# sanlock client acquire -r test:RB:/dev/leases:2097152:SH -p $P
9. Release resource leases for the application on both hosts.
The sleep pid could also be killed, which will result in the sanlock daemon releasing its leases when
it exits.
# sanlock client release -r test:RA:/dev/leases:1048576 -p $P
# sanlock client release -r test:RB:/dev/leases:2097152 -p $P
10. Leave the lockspace for the application.
host1:
# sanlock client rem_lockspace -s test:1:/dev/leases:0
host2:
# sanlock client rem_lockspace -s test:2:/dev/leases:0
11. Stop sanlock on all hosts.
# sanlock shutdown
OPTIONS
COMMAND can be one of three primary top level choices
sanlock daemon start daemon
sanlock client send request to daemon (default command if none given)
sanlock direct access storage directly (no coordination with daemon)
Daemon Command
sanlock daemon [options]
-D no fork and print all logging to stderr
-Q 0|1 quiet error messages for common lock contention
-R 0|1 renewal debugging, log debug info for each renewal
-L pri write logging at priority level and up to logfile (-1 none)
-S pri write logging at priority level and up to syslog (-1 none)
-U uid user id
-G gid group id
-H num renewal history size
-t num max worker threads
-g sec seconds for graceful recovery
-w 0|1 use watchdog through wdmd
-h 0|1 use high priority (RR) scheduling
-l num use mlockall (0 none, 1 current, 2 current and future)
-b sec seconds a host id bit will remain set in delta lease bitmap
-e str local host name used in delta leases
Client Command
sanlock client action [options]
sanlock client status
Print processes, lockspaces, and resources being managed by the sanlock daemon. Add -D to show extra
internal daemon status for debugging. Add -o p to show resources by pid, or -o s to show resources by
lockspace.
sanlock client host_status
Print state of host_id delta leases read during the last renewal. State of all lockspaces is shown (use
-s to select one). Add -D to show extra internal daemon status for debugging.
sanlock client gets
Print lockspaces being managed by the sanlock daemon. The LOCKSPACE string will be followed by ADD or
REM if the lockspace is currently being added or removed. Add -h 1 to also show hosts in each lockspace.
sanlock client renewal -s LOCKSPACE
Print a history of renewals with timing details. See the Renewal history section below.
sanlock client log_dump
Print the sanlock daemon internal debug log.
sanlock client shutdown
Ask the sanlock daemon to exit. Without the force option (-f 0), the command will be ignored if any
lockspaces exist. With the force option (-f 1), any registered processes will be killed, their resource
leases released, and lockspaces removed. With the wait option (-w 1), the command will wait for a result
from the daemon indicating that it has shut down and is exiting, or cannot shut down because lockspaces
exist (command fails).
sanlock client init -s LOCKSPACE
Tell the sanlock daemon to initialize a lockspace on disk. The -o option can be used to specify the io
timeout to be written in the host_id leases. The -Z and -A options can be used to specify the sector
size and align size, and both should be set together. (Also see sanlock direct init.)
sanlock client init -r RESOURCE
Tell the sanlock daemon to initialize a resource lease on disk. The -Z and -A options can be used to
specify the sector size and align size, and both should be set together. (Also see sanlock direct init.)
sanlock client read -s LOCKSPACE
Tell the sanlock daemon to read a lockspace from disk. Only the LOCKSPACE path and offset are required.
If host_id is zero, the first record at offset (host_id 1) is used. The complete LOCKSPACE is printed.
Add -D to print other details. (Also see sanlock direct read_leader.)
sanlock client read -r RESOURCE
Tell the sanlock daemon to read a resource lease from disk. Only the RESOURCE path and offset are
required. The complete RESOURCE is printed. Add -D to print other details. (Also see sanlock direct
read_leader.)
sanlock client add_lockspace -s LOCKSPACE
Tell the sanlock daemon to acquire the specified host_id in the lockspace. This will allow resources to
be acquired in the lockspace. The -o option can be used to specify the io timeout of the acquiring host,
and will be written in the host_id lease.
sanlock client inq_lockspace -s LOCKSPACE
Inquire about the state of the lockspace in the sanlock daemon, whether it is being added or removed, or
is joined.
sanlock client rem_lockspace -s LOCKSPACE
Tell the sanlock daemon to release the specified host_id in the lockspace. Any processes holding
resource leases in this lockspace will be killed, and the resource leases not released.
sanlock client command -r RESOURCE -c path args
Register with the sanlock daemon, acquire the specified resource lease, and exec the command at path with
args. When the command exits, the sanlock daemon will release the lease. -c must be the final option.
sanlock client acquire -r RESOURCE -p pid
sanlock client release -r RESOURCE -p pid
Tell the sanlock daemon to acquire or release the specified resource lease for the given pid. The pid
must be registered with the sanlock daemon. acquire can optionally take a versioned RESOURCE string
RESOURCE:lver, where lver is the version of the lease that must be acquired, or fail.
sanlock client convert -r RESOURCE -p pid
Tell the sanlock daemon to convert the mode of the specified resource lease for the given pid. If the
existing mode is exclusive (default), the mode of the lease can be converted to shared with RESOURCE:SH.
If the existing mode is shared, the mode of the lease can be converted to exclusive with RESOURCE (no :SH
suffix).
sanlock client inquire -p pid
Print the resource leases held the given pid. The format is a versioned RESOURCE string "RESOURCE:lver"
where lver is the version of the lease held.
sanlock client request -r RESOURCE -f force_mode
Request the owner of a resource do something specified by force_mode. A versioned RESOURCE:lver string
must be used with a greater version than is presently held. Zero lver and force_mode clears the request.
sanlock client examine -r RESOURCE
Examine the request record for the currently held resource lease and carry out the action specified by
the requested force_mode.
sanlock client examine -s LOCKSPACE
Examine requests for all resource leases currently held in the named lockspace. Only lockspace_name is
used from the LOCKSPACE argument.
sanlock client set_event -s LOCKSPACE -i host_id -g gen -e num -d num
Set an event for another host. When the sanlock daemon next renews its delta lease for the lockspace it
will: set the bit for the host_id in its bitmap, and set the generation, event and data values in its own
delta lease. An application that has registered for events from this lockspace on the destination host
will get the event that has been set when the destination sees the event during its next delta lease
renewal.
sanlock client set_config -s LOCKSPACE
Set a configuration value for a lockspace. Only lockspace_name is used from the LOCKSPACE argument. The
USED flag has the same effect on a lockspace as a process holding a resource lease that will not exit.
The USED_BY_ORPHANS flag means that an orphan resource lease will have the same effect as the USED.
-u 0|1 Set (1) or clear (0) the USED flag.
-O 0|1 Set (1) or clear (0) the USED_BY_ORPHANS flag.
sanlock client format -x RINDEX
Create a resource index on disk. Use -Z and -A to set the sector size and align size to match the
lockspace.
sanlock client create -x RINDEX -e resource_name
Create a new resource lease on disk, using the rindex to find a free offset.
sanlock client delete -x RINDEX -e resource_name[:offset]
Delete an existing resource lease on disk.
sanlock client lookup -x RINDEX -e resource_name
Look up the offset of an existing resource lease by name on disk, using the rindex. With no -e option,
lookup returns the next free lease offset. If -e specifes both name and offset, the lookup verifies both
are correct.
sanlock client update -x RINDEX -e resource_name[:offset] [-z 0|1]
Add (-z 0) or remove (-z 1) an rindex entry on disk.
sanlock client rebuild -x RINDEX
Rebuild the rindex entries by scanning the disk for resource leases.
Direct Command
sanlock direct action [options]
-o sec io timeout in seconds
sanlock direct init -s LOCKSPACE
sanlock direct init -r RESOURCE
Initialize storage for a lockspace or resource. Use the -Z and -A flags to specify the sector size and
align size. The max hosts that can use the lockspace/resource (and the max possible host_id) is
determined by the sector/align size combination. Possible combinations are: 512/1M, 4096/1M, 4096/2M,
4096/4M, 4096/8M. Lockspaces and resources both use the same amount of space (align_size) for each
combination. When initializing a lockspace, sanlock initializes delta leases for max_hosts in the given
space. When initializing a resource, sanlock initializes a single paxos lease in the space. With -s,
the -o option specifies the io timeout to be written in the host_id leases. With -r, the -z 1 option
invalidates the resource lease on disk so it cannot be used until reinitialized normally.
sanlock direct read_leader -s LOCKSPACE
sanlock direct read_leader -r RESOURCE
Read a leader record from disk and print the fields. The leader record is the single sector of a delta
lease, or the first sector of a paxos lease.
sanlock direct dump path[:offset[:size]]
Read disk sectors and print leader records for delta or paxos leases. Add -f 1 to print the request
record values for paxos leases, host_ids set in delta lease bitmaps, and rindex entries.
sanlock direct format -x RINDEX
sanlock direct lookup -x RINDEX -e resource_name
sanlock direct update -x RINDEX -e resource_name[:offset] [-z 0|1]
sanlock direct rebuild -x RINDEX
Access the resource index on disk without going through the sanlock daemon. This precludes using the
internal paxos lease to protect rindex modifications. See client equivalents for descriptions.
LOCKSPACE option string
-s lockspace_name:host_id:path:offset
lockspace_name name of lockspace
host_id local host identifier in lockspace
path path to storage to use for leases
offset offset on path (bytes)
RESOURCE option string
-r lockspace_name:resource_name:path:offset
lockspace_name name of lockspace
resource_name name of resource
path path to storage to use leases
offset offset on path (bytes)
RESOURCE option string with suffix
-r lockspace_name:resource_name:path:offset:lver
lver leader version
-r lockspace_name:resource_name:path:offset:SH
SH indicates shared mode
RINDEX option string
-x lockspace_name:path:offset
lockspace_name name of lockspace
path path to storage to use for leases
offset offset on path (bytes) of rindex
Defaults
sanlock help shows the default values for the options above.
sanlock version shows the build version.
OTHER
Request/Examine
The first part of making a request for a resource is writing the request record of the resource (the
sector following the leader record). To make a successful request:
• RESOURCE:lver must be greater than the lver presently held by the other host. This implies the leader
record must be read to discover the lver, prior to making a request.
• RESOURCE:lver must be greater than or equal to the lver presently written to the request record. Two
hosts may write a new request at the same time for the same lver, in which case both would succeed, but
the force_mode from the last would win.
• The force_mode must be greater than zero.
• To unconditionally clear the request record (set both lver and force_mode to 0), make request with
RESOURCE:0 and force_mode 0.
The owner of the requested resource will not know of the request unless it is explicitly told to examine
its resources via the "examine" api/command, or otherwise notfied.
The second part of making a request is notifying the resource lease owner that it should examine the
request records of its resource leases. The notification will cause the lease owner to automatically run
the equivalent of "sanlock client examine -s LOCKSPACE" for the lockspace of the requested resource.
The notification is made using a bitmap in each host_id delta lease. Each bit represents each of the
possible host_ids (1-2000). If host A wants to notify host B to examine its resources, A sets the bit in
its own bitmap that corresponds to the host_id of B. When B next renews its delta lease, it reads the
delta leases for all hosts and checks each bitmap to see if its own host_id has been set. It finds the
bit for its own host_id set in A's bitmap, and examines its resource request records. (The bit remains
set in A's bitmap for set_bitmap_seconds.)
force_mode determines the action the resource lease owner should take:
• FORCE (1): kill the process holding the resource lease. When the process has exited, the resource
lease will be released, and can then be acquired by anyone. The kill signal is SIGKILL (or SIGTERM if
SIGKILL is restricted.)
• GRACEFUL (2): run the program configured by sanlock_killpath against the process holding the resource
lease. If no killpath is defined, then FORCE is used.
Persistent and orphan resource leases
A resource lease can be acquired with the PERSISTENT flag (-P 1). If the process holding the lease
exits, the lease will not be released, but kept on an orphan list. Another local process can acquire an
orphan lease using the ORPHAN flag (-O 1), or release the orphan lease using the ORPHAN flag (-O 1). All
orphan leases can be released by setting the lockspace name (-s lockspace_name) with no resource name.
Renewal history
sanlock saves a limited history of lease renewal information in each lockspace. See sanlock.conf
renewal_history_size to set the amount of history or to disable (set to 0).
IO times are measured in delta lease renewal (each delta lease renewal includes one read and one write).
For each successful renewal, a record is saved that includes:
• the timestamp written in the delta lease by the renewal
• the time in milliseconds taken by the delta lease read
• the time in milliseconds taken by the delta lease write
Also counted and recorded are the number io timeouts and other io errors that occur between successful
renewals.
Two consecutive successful renewals would be recorded as:
timestamp=5332 read_ms=482 write_ms=5525 next_timeouts=0 next_errors=0
timestamp=5353 read_ms=99 write_ms=3161 next_timeouts=0 next_errors=0
Those fields are:
• timestamp is the value written into the delta lease during that renewal.
• read_ms/write_ms are the milliseconds taken for the renewal read/write ios.
• next_timeouts are the number of io timeouts that occurred after the renewal recorded on that line, and
before the next successful renewal on the following line.
• next_errors are the number of io errors (not timeouts) that occurred after renewal recorded on that
line, and before the next successful renewal on the following line.
The command 'sanlock client renewal -s lockspace_name' reports the full history of renewals saved by
sanlock, which by default is 180 records, about 1 hour of history when using a 20 second renewal interval
for a 10 second io timeout.
INTERNALS
Disk Format
• This example uses 512 byte sectors.
• Each lockspace is 1MB. It holds 2000 delta_leases, one per sector, supporting up to 2000 hosts.
• Each paxos_lease is 1MB. It is used as a lease for one resource.
• The leader_record structure is used differently by each lease type.
• To display all leader_record fields, see sanlock direct read_leader.
• A lockspace is often followed on disk by the paxos_leases used within that lockspace, but this layout
is not required.
• The request_record and host_id bitmap are used for requests/events.
• The mode_block contains the SHARED flag indicating a lease is held in the shared mode.
• In a lockspace, the host using host_id N writes to a single delta_lease in sector N-1. No other hosts
write to this sector. All hosts read all lockspace sectors when renewing their own delta_lease, and
are able to monitor renewals of all delta_leases.
• In a paxos_lease, each host has a dedicated sector it writes to, containing its own paxos_dblock and
mode_block structures. Its sector is based on its host_id; host_id 1 writes to the dblock/mode_block
in sector 2 of the paxos_lease.
• The paxos_dblock structures are used by the paxos_lease algorithm, and the result is written to the
leader_record.
0x000000 lockspace foo:0:/path:0
(There is no representation on disk of the lockspace in general, only the sequence of specific
delta_leases which collectively represent the lockspace.)
delta_lease foo:1:/path:0
0x000 0 leader_record (sector 0, for host_id 1)
magic: 0x12212010
space_name: foo
resource_name: host uuid/name
...
host_id bitmap (leader_record + 256)
delta_lease foo:2:/path:0
0x200 512 leader_record (sector 1, for host_id 2)
magic: 0x12212010
space_name: foo
resource_name: host uuid/name
...
host_id bitmap (leader_record + 256)
delta_lease foo:3:/path:0
0x400 1024 leader_record (sector 2, for host_id 3)
magic: 0x12212010
space_name: foo
resource_name: host uuid/name
...
host_id bitmap (leader_record + 256)
delta_lease foo:2000:/path:0
0xF9E00 leader_record (sector 1999, for host_id 2000)
magic: 0x12212010
space_name: foo
resource_name: host uuid/name
...
host_id bitmap (leader_record + 256)
0x100000 paxos_lease foo:example1:/path:1048576
0x000 0 leader_record (sector 0)
magic: 0x06152010
space_name: foo
resource_name: example1
0x200 512 request_record (sector 1)
magic: 0x08292011
0x400 1024 paxos_dblock (sector 2, for host_id 1)
0x480 1152 mode_block (paxos_dblock + 128)
0x600 1536 paxos_dblock (sector 3, for host_id 2)
0x680 1664 mode_block (paxos_dblock + 128)
0x800 2048 paxos_dblock (sector 4, for host_id 3)
0x880 2176 mode_block (paxos_dblock + 128)
0xFA200 paxos_dblock (sector 2001, for host_id 2000)
0xFA280 mode_block (paxos_dblock + 128)
0x200000 paxos_lease foo:example2:/path:2097152
0x000 0 leader_record (sector 0)
magic: 0x06152010
space_name: foo
resource_name: example2
0x200 512 request_record (sector 1)
magic: 0x08292011
0x400 1024 paxos_dblock (sector 2, for host_id 1)
0x480 1152 mode_block (paxos_dblock + 128)
0x600 1536 paxos_dblock (sector 3, for host_id 2)
0x680 1664 mode_block (paxos_dblock + 128)
0x800 2048 paxos_dblock (sector 4, for host_id 3)
0x880 2176 mode_block (paxos_dblock + 128)
0xFA200 paxos_dblock (sector 2001, for host_id 2000)
0xFA280 mode_block (paxos_dblock + 128)
Lease ownership
Not shown in the leader_record structures above are the owner_id, owner_generation and timestamp fields.
These are the fields that define the lease owner.
The delta_lease at sector N for host_id N+1 has leader_record.owner_id N+1. The
leader_record.owner_generation is incremented each time the delta_lease is acquired. When a delta_lease
is acquired, the leader_record.timestamp field is set to the time of the host and the
leader_record.resource_name is set to the unique name of the host. When the host renews the delta_lease,
it writes a new leader_record.timestamp. When a host releases a delta_lease, it writes zero to
leader_record.timestamp.
When a host acquires a paxos_lease, it uses the host_id/generation value from the delta_lease it holds in
the lockspace. It uses this host_id/generation to identify itself in the paxos_dblock when running the
paxos algorithm. The result of the algorithm is the winning host_id/generation - the new owner of the
paxos_lease. The winning host_id/generation are written to the paxos_lease leader_record.owner_id and
leader_record.owner_generation fields and leader_record.timestamp is set. When a host releases a
paxos_lease, it sets leader_record.timestamp to 0.
When a paxos_lease is free (leader_record.timestamp is 0), multiple hosts may attempt to acquire it. The
paxos algorithm, using the paxos_dblock structures, will select only one of the hosts as the new owner,
and that owner is written in the leader_record. The paxos_lease will no longer be free (non-zero
timestamp). Other hosts will see this and will not attempt to acquire the paxos_lease until it is free
again.
If a paxos_lease is owned (non-zero timestamp), but the owner has not renewed its delta_lease for a
specific length of time, then the owner value in the paxos_lease becomes expired, and other hosts will
use the paxos algorithm to acquire the paxos_lease, and set a new owner.
FILES
/etc/sanlock/sanlock.conf
• quiet_fail = 1
See -Q
• debug_renew = 0
See -R
• logfile_priority = 4
See -L
• logfile_use_utc = 0
Use UTC instead of local time in log messages.
• syslog_priority = 3
See -S
• names_log_priority = 4
Log resource names at this priority level (uses syslog priority numbers). If this is greater than or
equal to logfile_priority, each requested resource name and location is recorded in sanlock.log.
• use_watchdog = 1
See -w
• high_priority = 1
See -h
• mlock_level = 1
See -l
• sh_retries = 8
The number of times to try acquiring a paxos lease when acquiring a shared lease when the paxos lease
is held by another host acquiring a shared lease.
• uname = sanlock
See -U
• gname = sanlock
See -G
• our_host_name = <str>
See -e
• renewal_read_extend_sec = <seconds>
If a renewal read i/o times out, wait this many additional seconds for that read to complete at the
start of the subsequent renewal attempt. When not configured, sanlock waits for an additional
io_timeout seconds for a previous timed out read to complete.
• renewal_history_size = 180
See -H
• paxos_debug_all = 0
Include all details in the paxos debug logging.
• debug_io = <str>
Add debug logging for each i/o. "submit" (no quotes) produces debug output at submission time,
"complete" produces debug output at completion time, and "submit,complete" (no space) produces both.
• max_sectors_kb = <str>|<num>
Set to "ignore" (no quotes) to prevent sanlock from checking or changing max_sectors_kb for the
lockspace disk when starting a lockspace. Set to "align" (no quotes) to set max_sectors_kb for the
lockspace disk to the align size of the lockspace. Set to a number to set a specific number of KB for
all lockspace disks.
• debug_clients = 0
Enable or disable debug logging for all client connections to the sanlock daemon.
• debug_cmd = +|-<name>
Enable (+name) or disable (-name) debug logging at the command processing level for specifically named
commands, e.g. "debug_cmd = +acquire", or "debug_cmd = -inq_lockspace". Repeat this line for each
command name. Use a plus prefix before the name to enable and a minus prefix to disable. By default
sanlock disables some command level debugging for commands that are often repetitive and fill the in
memory debug buffer. This only affects debug logging, not errors or warnings, and disabling command
level debugging for a command does not disable lower level debugging for that command. Special values
+all and -all can be used to enable or disable all commands, and can be used before or after other
debug_cmd lines.
• write_init_io_timeout = <seconds>
The io timeout to use when initializing ondisk lease structures for a lockspace or resource. This
timeout is not used as a part of either lease algorithm (as the standard io_timeout is.)
• max_worker_threads = <num>
See -t
SEE ALSO
wdmd(8)
2015-01-23 SANLOCK(8)