NAME

       stund - STUN protocol (Simple Traversal of UDP through NATs) Server

SYNTAX

       stund [-v] [-h IP Address] [-a Secondary IP Address ] [-p port ] [-o port ]  [-b  ] [-m  ]

       STUN servers needs two IP addresses and two ports

DESCRIPTION

       STUN  Servers  are  used to help clients behind NAT to tunnel incoming calls through. This
       server is the counterpart to help the client identify the NAT and have it open the  proper
       ports for it

OPTIONS

       -v     Verbose output.

       -h <IP Address>
              Define the Main IP Address.

       -a <IP Address>
              Define the Second IP Address.

       -p <Port>
              Set the primary port the default port value is 3478

       -o <Port>
              Set  the  secondary  port  the default port value is 3479 -b Detach the process and
              makes the program run at the background

       -m <Port>
              Sets a starting port for the STERM server

       --help Prints useful help

EXAMPLES

       If the IP addresses of your NIC are 10.0.1.150 and 10.0.1.151 the proper and  default  use
       would be:

       stund  -h 10.0.1.150 -a 10.0.1.151

       add -b option to detach the process

       stund  -h 10.0.1.150 -a 10.0.1.151 -b

AUTHORS

       This  manual  page was written by Rene  Mayorga  <rmayorga@debian.org.sv> for  the  Debian
       system  (but  may  be used by others).  Permission is granted to copy,  distribute  and/or
       modify  this document under the terms of  the  GNU  General  Public License, Version 2 any
       later version published by the Free Software Foundation.

       On Debian systems, the complete text of the GNU General Public  License can  be  found  in
       /usr/share/common-licenses/GPL.

SEE ALSO

       stun(1)