Provided by: sox_14.4.2+git20190427-5_amd64 
NAME
SoX - Sound eXchange, the Swiss Army knife of audio manipulation
SYNOPSIS
sox [global-options] [format-options] infile1
[[format-options] infile2] ... [format-options] outfile
[effect [effect-options]] ...
play [global-options] [format-options] infile1
[[format-options] infile2] ... [format-options]
[effect [effect-options]] ...
rec [global-options] [format-options] outfile
[effect [effect-options]] ...
DESCRIPTION
Introduction
SoX reads and writes audio files in most popular formats and can optionally apply effects
to them. It can combine multiple input sources, synthesise audio, and, on many systems,
act as a general purpose audio player or a multi-track audio recorder. It also has limited
ability to split the input into multiple output files.
All SoX functionality is available using just the sox command. To simplify playing and
recording audio, if SoX is invoked as play, the output file is automatically set to be the
default sound device, and if invoked as rec, the default sound device is used as an input
source. Additionally, the soxi(1) command provides a convenient way to just query audio
file header information.
The heart of SoX is a library called libSoX. Those interested in extending SoX or using
it in other programs should refer to the libSoX manual page: libsox(3).
SoX is a command-line audio processing tool, particularly suited to making quick, simple
edits and to batch processing. If you need an interactive, graphical audio editor, use
audacity(1).
* * *
The overall SoX processing chain can be summarised as follows:
Input(s) → Combiner → Effects → Output(s)
Note however, that on the SoX command line, the positions of the Output(s) and the Effects
are swapped w.r.t. the logical flow just shown. Note also that whilst options pertaining
to files are placed before their respective file name, the opposite is true for effects.
To show how this works in practice, here is a selection of examples of how SoX might be
used. The simple
sox recital.au recital.wav
translates an audio file in Sun AU format to a Microsoft WAV file, whilst
sox recital.au -b 16 recital.wav channels 1 rate 16k fade 3 norm
performs the same format translation, but also applies four effects (down-mix to one
channel, sample rate change, fade-in, nomalize), and stores the result at a bit-depth of
16.
sox -r 16k -e signed -b 8 -c 1 voice-memo.raw voice-memo.wav
converts `raw' (a.k.a. `headerless') audio to a self-describing file format,
sox slow.aiff fixed.aiff speed 1.027
adjusts audio speed,
sox short.wav long.wav longer.wav
concatenates two audio files, and
sox -m music.mp3 voice.wav mixed.flac
mixes together two audio files.
play "The Moonbeams/Greatest/*.ogg" bass +3
plays a collection of audio files whilst applying a bass boosting effect,
play -n -c1 synth sin %-12 sin %-9 sin %-5 sin %-2 fade h 0.1 1 0.1
plays a synthesised `A minor seventh' chord with a pipe-organ sound,
rec -c 2 radio.aiff trim 0 30:00
records half an hour of stereo audio, and
play -q take1.aiff & rec -M take1.aiff take1-dub.aiff
(with POSIX shell and where supported by hardware) records a new track in a multi-track
recording. Finally,
rec -r 44100 -b 16 -e signed-integer -p \
silence 1 0.50 0.1% 1 10:00 0.1% | \
sox -p song.ogg silence 1 0.50 0.1% 1 2.0 0.1% : \
newfile : restart
records a stream of audio such as LP/cassette and splits in to multiple audio files at
points with 2 seconds of silence. Also, it does not start recording until it detects
audio is playing and stops after it sees 10 minutes of silence.
N.B. The above is just an overview of SoX's capabilities; detailed explanations of how to
use all SoX parameters, file formats, and effects can be found below in this manual, in
soxformat(7), and in soxi(1).
File Format Types
SoX can work with `self-describing' and `raw' audio files. `self-describing' formats
(e.g. WAV, FLAC, MP3) have a header that completely describes the signal and encoding
attributes of the audio data that follows. `raw' or `headerless' formats do not contain
this information, so the audio characteristics of these must be described on the SoX
command line or inferred from those of the input file.
The following four characteristics are used to describe the format of audio data such that
it can be processed with SoX:
sample rate
The sample rate in samples per second (`Hertz' or `Hz'). Digital telephony
traditionally uses a sample rate of 8000 Hz (8 kHz), though these days, 16 and even
32 kHz are becoming more common. Audio Compact Discs use 44100 Hz (44.1 kHz).
Digital Audio Tape and many computer systems use 48 kHz. Professional audio systems
often use 96 kHz.
sample size
The number of bits used to store each sample. Today, 16-bit is commonly used.
8-bit was popular in the early days of computer audio. 24-bit is used in the
professional audio arena. Other sizes are also used.
data encoding
The way in which each audio sample is represented (or `encoded'). Some encodings
have variants with different byte-orderings or bit-orderings. Some compress the
audio data so that the stored audio data takes up less space (i.e. disk space or
transmission bandwidth) than the other format parameters and the number of samples
would imply. Commonly-used encoding types include floating-point, μ-law, ADPCM,
signed-integer PCM, MP3, and FLAC.
channels
The number of audio channels contained in the file. One (`mono') and two
(`stereo') are widely used. `Surround sound' audio typically contains six or more
channels.
The term `bit-rate' is a measure of the amount of storage occupied by an encoded audio
signal over a unit of time. It can depend on all of the above and is typically denoted as
a number of kilo-bits per second (kbps). An A-law telephony signal has a bit-rate of 64
kbps. MP3-encoded stereo music typically has a bit-rate of 128-196 kbps. FLAC-encoded
stereo music typically has a bit-rate of 550-760 kbps.
Most self-describing formats also allow textual `comments' to be embedded in the file that
can be used to describe the audio in some way, e.g. for music, the title, the author, etc.
One important use of audio file comments is to convey `Replay Gain' information. SoX
supports applying Replay Gain information (for certain input file formats only; currently,
at least FLAC and Ogg Vorbis), but not generating it. Note that by default, SoX copies
input file comments to output files that support comments, so output files may contain
Replay Gain information if some was present in the input file. In this case, if anything
other than a simple format conversion was performed then the output file Replay Gain
information is likely to be incorrect and so should be recalculated using a tool that
supports this (not SoX).
The soxi(1) command can be used to display information from audio file headers.
Determining & Setting The File Format
There are several mechanisms available for SoX to use to determine or set the format
characteristics of an audio file. Depending on the circumstances, individual
characteristics may be determined or set using different mechanisms.
To determine the format of an input file, SoX will use, in order of precedence and as
given or available:
1. Command-line format options.
2. The contents of the file header.
3. The filename extension.
To set the output file format, SoX will use, in order of precedence and as given or
available:
1. Command-line format options.
2. The filename extension.
3. The input file format characteristics, or the closest that is supported by the output
file type.
For all files, SoX will exit with an error if the file type cannot be determined. Command-
line format options may need to be added or changed to resolve the problem.
Playing & Recording Audio
The play and rec commands are provided so that basic playing and recording is as simple as
play existing-file.wav
and
rec new-file.wav
These two commands are functionally equivalent to
sox existing-file.wav -d
and
sox -d new-file.wav
Of course, further options and effects (as described below) can be added to the commands
in either form.
* * *
Some systems provide more than one type of (SoX-compatible) audio driver, e.g. ALSA & OSS,
or SUNAU & AO. Systems can also have more than one audio device (a.k.a. `sound card').
If more than one audio driver has been built-in to SoX, and the default selected by SoX
when recording or playing is not the one that is wanted, then the AUDIODRIVER environment
variable can be used to override the default. For example (on many systems):
set AUDIODRIVER=oss
play ...
The AUDIODEV environment variable can be used to override the default audio device, e.g.
set AUDIODEV=/dev/dsp2
play ...
sox ... -t oss
or
set AUDIODEV=hw:soundwave,1,2
play ...
sox ... -t alsa
Note that the way of setting environment variables varies from system to system - for some
specific examples, see `SOX_OPTS' below.
When playing a file with a sample rate that is not supported by the audio output device,
SoX will automatically invoke the rate effect to perform the necessary sample rate
conversion. For compatibility with old hardware, the default rate quality level is set to
`low'. This can be changed by explicitly specifying the rate effect with a different
quality level, e.g.
play ... rate -m
or by using the --play-rate-arg option (see below).
* * *
On some systems, SoX allows audio playback volume to be adjusted whilst using play. Where
supported, this is achieved by tapping the `v' & `V' keys during playback.
To help with setting a suitable recording level, SoX includes a peak-level meter which can
be invoked (before making the actual recording) as follows:
rec -n
The recording level should be adjusted (using the system-provided mixer program, not SoX)
so that the meter is at most occasionally full scale, and never `in the red' (an
exclamation mark is shown). See also -S below.
Accuracy
Many file formats that compress audio discard some of the audio signal information whilst
doing so. Converting to such a format and then converting back again will not produce an
exact copy of the original audio. This is the case for many formats used in telephony
(e.g. A-law, GSM) where low signal bandwidth is more important than high audio fidelity,
and for many formats used in portable music players (e.g. MP3, Vorbis) where adequate
fidelity can be retained even with the large compression ratios that are needed to make
portable players practical.
Formats that discard audio signal information are called `lossy'. Formats that do not are
called `lossless'. The term `quality' is used as a measure of how closely the original
audio signal can be reproduced when using a lossy format.
Audio file conversion with SoX is lossless when it can be, i.e. when not using lossy
compression, when not reducing the sampling rate or number of channels, and when the
number of bits used in the destination format is not less than in the source format. E.g.
converting from an 8-bit PCM format to a 16-bit PCM format is lossless but converting from
an 8-bit PCM format to (8-bit) A-law isn't.
N.B. SoX converts all audio files to an internal uncompressed format before performing
any audio processing. This means that manipulating a file that is stored in a lossy format
can cause further losses in audio fidelity. E.g. with
sox long.mp3 short.mp3 trim 10
SoX first decompresses the input MP3 file, then applies the trim effect, and finally
creates the output MP3 file by re-compressing the audio - with a possible reduction in
fidelity above that which occurred when the input file was created. Hence, if what is
ultimately desired is lossily compressed audio, it is highly recommended to perform all
audio processing using lossless file formats and then convert to the lossy format only at
the final stage.
N.B. Applying multiple effects with a single SoX invocation will, in general, produce
more accurate results than those produced using multiple SoX invocations.
Dithering
Dithering is a technique used to maximise the dynamic range of audio stored at a
particular bit-depth. Any distortion introduced by quantisation is decorrelated by adding
a small amount of white noise to the signal. In most cases, SoX can determine whether the
selected processing requires dither and will add it during output formatting if
appropriate.
Specifically, by default, SoX automatically adds TPDF dither when the output bit-depth is
less than 24 and any of the following are true:
• bit-depth reduction has been specified explicitly using a command-line option
• the output file format supports only bit-depths lower than that of the input file
format
• an effect has increased effective bit-depth within the internal processing chain
For example, adjusting volume with vol 0.25 requires two additional bits in which to
losslessly store its results (since 0.25 decimal equals 0.01 binary). So if the input
file bit-depth is 16, then SoX's internal representation will utilise 18 bits after
processing this volume change. In order to store the output at the same depth as the
input, dithering is used to remove the additional bits.
Use the -V option to see what processing SoX has automatically added. The -D option may be
given to override automatic dithering. To invoke dithering manually (e.g. to select a
noise-shaping curve), see the dither effect.
Clipping
Clipping is distortion that occurs when an audio signal level (or `volume') exceeds the
range of the chosen representation. In most cases, clipping is undesirable and so should
be corrected by adjusting the level prior to the point (in the processing chain) at which
it occurs.
In SoX, clipping could occur, as you might expect, when using the vol or gain effects to
increase the audio volume. Clipping could also occur with many other effects, when
converting one format to another, and even when simply playing the audio.
Playing an audio file often involves resampling, and processing by analogue components can
introduce a small DC offset and/or amplification, all of which can produce distortion if
the audio signal level was initially too close to the clipping point.
For these reasons, it is usual to make sure that an audio file's signal level has some
`headroom', i.e. it does not exceed a particular level below the maximum possible level
for the given representation. Some standards bodies recommend as much as 9dB headroom,
but in most cases, 3dB (≈ 70% linear) is enough. Note that this wisdom seems to have been
lost in modern music production; in fact, many CDs, MP3s, etc. are now mastered at levels
above 0dBFS i.e. the audio is clipped as delivered.
SoX's stat and stats effects can assist in determining the signal level in an audio file.
The gain or vol effect can be used to prevent clipping, e.g.
sox dull.wav bright.wav gain -6 treble +6
guarantees that the treble boost will not clip.
If clipping occurs at any point during processing, SoX will display a warning message to
that effect.
See also -G and the gain and norm effects.
Input File Combining
SoX's input combiner can be configured (see OPTIONS below) to combine multiple files using
any of the following methods: `concatenate', `sequence', `mix', `mix-power', `merge', or
`multiply'. The default method is `sequence' for play, and `concatenate' for rec and sox.
For all methods other than `sequence', multiple input files must have the same sampling
rate. If necessary, separate SoX invocations can be used to make sampling rate adjustments
prior to combining.
If the `concatenate' combining method is selected (usually, this will be by default) then
the input files must also have the same number of channels. The audio from each input
will be concatenated in the order given to form the output file.
The `sequence' combining method is selected automatically for play. It is similar to
`concatenate' in that the audio from each input file is sent serially to the output file.
However, here the output file may be closed and reopened at the corresponding transition
between input files. This may be just what is needed when sending different types of audio
to an output device, but is not generally useful when the output is a normal file.
If either the `mix' or `mix-power' combining method is selected then two or more input
files must be given and will be mixed together to form the output file. The number of
channels in each input file need not be the same, but SoX will issue a warning if they are
not and some channels in the output file will not contain audio from every input file. A
mixed audio file cannot be un-mixed without reference to the original input files.
If the `merge' combining method is selected then two or more input files must be given and
will be merged together to form the output file. The number of channels in each input
file need not be the same. A merged audio file comprises all of the channels from all of
the input files. Un-merging is possible using multiple invocations of SoX with the remix
effect. For example, two mono files could be merged to form one stereo file. The first
and second mono files would become the left and right channels of the stereo file.
The `multiply' combining method multiplies the sample values of corresponding channels
(treated as numbers in the interval -1 to +1). If the number of channels in the input
files is not the same, the missing channels are considered to contain all zero.
When combining input files, SoX applies any specified effects (including, for example, the
vol volume adjustment effect) after the audio has been combined. However, it is often
useful to be able to set the volume of (i.e. `balance') the inputs individually, before
combining takes place.
For all combining methods, input file volume adjustments can be made manually using the -v
option (below) which can be given for one or more input files. If it is given for only
some of the input files then the others receive no volume adjustment. In some
circumstances, automatic volume adjustments may be applied (see below).
The -V option (below) can be used to show the input file volume adjustments that have been
selected (either manually or automatically).
There are some special considerations that need to made when mixing input files:
Unlike the other methods, `mix' combining has the potential to cause clipping in the
combiner if no balancing is performed. In this case, if manual volume adjustments are not
given, SoX will try to ensure that clipping does not occur by automatically adjusting the
volume (amplitude) of each input signal by a factor of ¹/n, where n is the number of input
files. If this results in audio that is too quiet or otherwise unbalanced then the input
file volumes can be set manually as described above. Using the norm effect on the mix is
another alternative.
If mixed audio seems loud enough at some points but too quiet in others then dynamic range
compression should be applied to correct this - see the compand effect.
With the `mix-power' combine method, the mixed volume is approximately equal to that of
one of the input signals. This is achieved by balancing using a factor of ¹/√n instead of
¹/n. Note that this balancing factor does not guarantee that clipping will not occur, but
the number of clips will usually be low and the resultant distortion is generally
imperceptible.
Output Files
SoX's default behaviour is to take one or more input files and write them to a single
output file.
This behaviour can be changed by specifying the pseudo-effect `newfile' within the effects
list. SoX will then enter multiple output mode.
In multiple output mode, a new file is created when the effects prior to the `newfile'
indicate they are done. The effects chain listed after `newfile' is then started up and
its output is saved to the new file.
In multiple output mode, a unique number will automatically be appended to the end of all
filenames. If the filename has an extension then the number is inserted before the
extension. This behaviour can be customized by placing a %n anywhere in the filename
where the number should be substituted. An optional number can be placed after the % to
indicate a minimum fixed width for the number.
Multiple output mode is not very useful unless an effect that will stop the effects chain
early is specified before the `newfile'. If end of file is reached before the effects
chain stops itself then no new file will be created as it would be empty.
The following is an example of splitting the first 60 seconds of an input file into two 30
second files and ignoring the rest.
sox song.wav ringtone%1n.wav trim 0 30 : newfile : trim 0 30
Stopping SoX
Usually SoX will complete its processing and exit automatically once it has read all
available audio data from the input files.
If desired, it can be terminated earlier by sending an interrupt signal to the process
(usually by pressing the keyboard interrupt key which is normally Ctrl-C). This is a
natural requirement in some circumstances, e.g. when using SoX to make a recording. Note
that when using SoX to play multiple files, Ctrl-C behaves slightly differently: pressing
it once causes SoX to skip to the next file; pressing it twice in quick succession causes
SoX to exit.
Another option to stop processing early is to use an effect that has a time period or
sample count to determine the stopping point. The trim effect is an example of this. Once
all effects chains have stopped then SoX will also stop.
FILENAMES
Filenames can be simple file names, absolute or relative path names, or URLs (input files
only). Note that URL support requires that wget(1) is available.
Note: Giving SoX an input or output filename that is the same as a SoX effect-name will
not work since SoX will treat it as an effect specification. The only work-around to this
is to avoid such filenames. This is generally not difficult since most audio filenames
have a filename `extension', whilst effect-names do not.
Special Filenames
The following special filenames may be used in certain circumstances in place of a normal
filename on the command line:
- SoX can be used in simple pipeline operations by using the special filename `-'
which, if used as an input filename, will cause SoX will read audio data from
`standard input' (stdin), and which, if used as the output filename, will cause SoX
will send audio data to `standard output' (stdout). Note that when using this
option for the output file, and sometimes when using it for an input file, the
file-type (see -t below) must also be given.
"|program [options] ..."
This can be used in place of an input filename to specify the the given program's
standard output (stdout) be used as an input file. Unlike - (above), this can be
used for several inputs to one SoX command. For example, if `genw' generates mono
WAV formatted signals to its standard output, then the following command makes a
stereo file from two generated signals:
sox -M "|genw --imd -" "|genw --thd -" out.wav
For headerless (raw) audio, -t (and perhaps other format options) will need to be
given, preceding the input command.
"wildcard-filename"
Specifies that filename `globbing' (wild-card matching) should be performed by SoX
instead of by the shell. This allows a single set of file options to be applied to
a group of files. For example, if the current directory contains three `vox'
files, file1.vox, file2.vox, and file3.vox, then
play --rate 6k *.vox
will be expanded by the `shell' (in most environments) to
play --rate 6k file1.vox file2.vox file3.vox
which will treat only the first vox file as having a sample rate of 6k. With
play --rate 6k "*.vox"
the given sample rate option will be applied to all three vox files.
-p, --sox-pipe
This can be used in place of an output filename to specify that the SoX command
should be used as in input pipe to another SoX command. For example, the command:
play "|sox -n -p synth 2" "|sox -n -p synth 2 tremolo 10" stat
plays two `files' in succession, each with different effects.
-p is in fact an alias for `-t sox -'.
-d, --default-device
This can be used in place of an input or output filename to specify that the
default audio device (if one has been built into SoX) is to be used. This is akin
to invoking rec or play (as described above).
-n, --null
This can be used in place of an input or output filename to specify that a `null
file' is to be used. Note that here, `null file' refers to a SoX-specific
mechanism and is not related to any operating-system mechanism with a similar name.
Using a null file to input audio is equivalent to using a normal audio file that
contains an infinite amount of silence, and as such is not generally useful unless
used with an effect that specifies a finite time length (such as trim or synth).
Using a null file to output audio amounts to discarding the audio and is useful
mainly with effects that produce information about the audio instead of affecting
it (such as noiseprof or stat).
The sampling rate associated with a null file is by default 48 kHz, but, as with a
normal file, this can be overridden if desired using command-line format options
(see below).
Supported File & Audio Device Types
See soxformat(7) for a list and description of the supported file formats and audio device
drivers.
OPTIONS
Global Options
These options can be specified on the command line at any point before the first effect
name.
The SOX_OPTS environment variable can be used to provide alternative default values for
SoX's global options. For example:
SOX_OPTS="--buffer 20000 --play-rate-arg -hs --temp /mnt/temp"
Note that setting SOX_OPTS can potentially create unwanted changes in the behaviour of
scripts or other programs that invoke SoX. SOX_OPTS might best be used for things (such
as in the given example) that reflect the environment in which SoX is being run. Enabling
options such as --no-clobber as default might be handled better using a shell alias since
a shell alias will not affect operation in scripts etc.
One way to ensure that a script cannot be affected by SOX_OPTS is to clear SOX_OPTS at the
start of the script, but this of course loses the benefit of SOX_OPTS carrying some
system-wide default options. An alternative approach is to explicitly invoke SoX with
default option values, e.g.
SOX_OPTS="-V --no-clobber"
...
sox -V2 --clobber $input $output ...
Note that the way to set environment variables varies from system to system. Here are some
examples:
Unix bash:
export SOX_OPTS="-V --no-clobber"
Unix csh:
setenv SOX_OPTS "-V --no-clobber"
MS-DOS/MS-Windows:
set SOX_OPTS=-V --no-clobber
MS-Windows GUI: via Control Panel : System : Advanced : Environment Variables
Mac OS X GUI: Refer to Apple's Technical Q&A QA1067 document.
--buffer BYTES, --input-buffer BYTES
Set the size in bytes of the buffers used for processing audio (default 8192).
--buffer applies to input, effects, and output processing; --input-buffer applies
only to input processing (for which it overrides --buffer if both are given).
Be aware that large values for --buffer will cause SoX to be become slow to respond
to requests to terminate or to skip the current input file.
--clobber
Don't prompt before overwriting an existing file with the same name as that given
for the output file. This is the default behaviour.
--combine concatenate|merge|mix|mix-power|multiply|sequence
Select the input file combining method; for some of these, short options are
available: -m selects `mix', -M selects `merge', and -T selects `multiply'.
See Input File Combining above for a description of the different combining
methods.
-D, --no-dither
Disable automatic dither - see `Dithering' above. An example of why this might
occasionally be useful is if a file has been converted from 16 to 24 bit with the
intention of doing some processing on it, but in fact no processing is needed after
all and the original 16 bit file has been lost, then, strictly speaking, no dither
is needed if converting the file back to 16 bit. See also the stats effect for how
to determine the actual bit depth of the audio within a file.
--effects-file FILENAME
Use FILENAME to obtain all effects and their arguments. The file is parsed as if
the values were specified on the command line. A new line can be used in place of
the special : marker to separate effect chains. For convenience, such markers at
the end of the file are normally ignored; if you want to specify an empty last
effects chain, use an explicit : by itself on the last line of the file. This
option causes any effects specified on the command line to be discarded.
-G, --guard
Automatically invoke the gain effect to guard against clipping. E.g.
sox -G infile -b 16 outfile rate 44100 dither -s
is shorthand for
sox infile -b 16 outfile gain -h rate 44100 gain -rh dither -s
See also -V, --norm, and the gain effect.
-h, --help
Show version number and usage information.
--help-effect NAME
Show usage information on the specified effect. The name all can be used to show
usage on all effects.
--help-format NAME
Show information about the specified file format. The name all can be used to show
information on all formats.
--i, --info
Only if given as the first parameter to sox, behave as soxi(1).
-m|-M Equivalent to --combine mix and --combine merge, respectively.
--magic
If SoX has been built with the optional `libmagic' library then this option can be
given to enable its use in helping to detect audio file types.
--multi-threaded | --single-threaded
By default, SoX is `single threaded'. If the --multi-threaded option is given
however then SoX will process audio channels for most multi-channel effects in
parallel on hyper-threading/multi-core architectures. This may reduce processing
time, though sometimes it may be necessary to use this option in conjunction with a
larger buffer size than is the default to gain any benefit from multi-threaded
processing (e.g. 131072; see --buffer above).
--no-clobber
Prompt before overwriting an existing file with the same name as that given for the
output file.
N.B. Unintentionally overwriting a file is easier than you might think, for
example, if you accidentally enter
sox file1 file2 effect1 effect2 ...
when what you really meant was
play file1 file2 effect1 effect2 ...
then, without this option, file2 will be overwritten. Hence, using this option is
recommended. SOX_OPTS (above), a `shell' alias, script, or batch file may be an
appropriate way of permanently enabling it.
--norm[=dB-level]
Automatically invoke the gain effect to guard against clipping and to normalise the
audio. E.g.
sox --norm infile -b 16 outfile rate 44100 dither -s
is shorthand for
sox infile -b 16 outfile gain -h rate 44100 gain -nh dither -s
Optionally, the audio can be normalized to a given level (usually) below 0 dBFS:
sox --norm=-3 infile outfile
See also -V, -G, and the gain effect.
--play-rate-arg ARG
Selects a quality option to be used when the `rate' effect is automatically invoked
whilst playing audio. This option is typically set via the SOX_OPTS environment
variable (see above).
--plot gnuplot|octave|off
If not set to off (the default if --plot is not given), run in a mode that can be
used, in conjunction with the gnuplot program or the GNU Octave program, to assist
with the selection and configuration of many of the transfer-function based
effects. For the first given effect that supports the selected plotting program,
SoX will output commands to plot the effect's transfer function, and then exit
without actually processing any audio. E.g.
sox --plot octave input-file -n highpass 1320 > highpass.plt
octave highpass.plt
-q, --no-show-progress
Run in quiet mode when SoX wouldn't otherwise do so. This is the opposite of the
-S option.
-R Run in `repeatable' mode. When this option is given, where applicable, SoX will
embed a fixed time-stamp in the output file (e.g. AIFF) and will `seed' pseudo
random number generators (e.g. dither) with a fixed number, thus ensuring that
successive SoX invocations with the same inputs and the same parameters yield the
same output.
--replay-gain track|album|off
Select whether or not to apply replay-gain adjustment to input files. The default
is off for sox and rec, album for play where (at least) the first two input files
are tagged with the same Artist and Album names, and track for play otherwise.
-S, --show-progress
Display input file format/header information, and processing progress as input
file(s) percentage complete, elapsed time, and remaining time (if known; shown in
brackets), and the number of samples written to the output file. Also shown is a
peak-level meter, and an indication if clipping has occurred. The peak-level meter
shows up to two channels and is calibrated for digital audio as follows (right
channel shown):
dB FSD Display dB FSD Display
-25 - -11 ====
-23 = -9 ====-
-21 =- -7 =====
-19 == -5 =====-
-17 ==- -3 ======
-15 === -1 =====!
-13 ===-
A three-second peak-held value of headroom in dBs will be shown to the right of the
meter if this is below 6dB.
This option is enabled by default when using SoX to play or record audio.
-T Equivalent to --combine multiply.
--temp DIRECTORY
Specify that any temporary files should be created in the given DIRECTORY. This
can be useful if there are permission or free-space problems with the default
location. In this case, using `--temp .' (to use the current directory) is often a
good solution.
--version
Show SoX's version number and exit.
-V[level]
Set verbosity. This is particularly useful for seeing how any automatic effects
have been invoked by SoX.
SoX displays messages on the console (stderr) according to the following verbosity
levels:
0 No messages are shown at all; use the exit status to determine if an error
has occurred.
1 Only error messages are shown. These are generated if SoX cannot complete
the requested commands.
2 Warning messages are also shown. These are generated if SoX can complete
the requested commands, but not exactly according to the requested command
parameters, or if clipping occurs.
3 Descriptions of SoX's processing phases are also shown. Useful for seeing
exactly how SoX is processing your audio.
4 and above
Messages to help with debugging SoX are also shown.
By default, the verbosity level is set to 2 (shows errors and warnings). Each
occurrence of the -V option increases the verbosity level by 1. Alternatively, the
verbosity level can be set to an absolute number by specifying it immediately after
the -V, e.g. -V0 sets it to 0.
Input File Options
These options apply only to input files and may precede only input filenames on the
command line.
--ignore-length
Override an (incorrect) audio length given in an audio file's header. If this
option is given then SoX will keep reading audio until it reaches the end of the
input file.
-v, --volume FACTOR
Intended for use when combining multiple input files, this option adjusts the
volume of the file that follows it on the command line by a factor of FACTOR. This
allows it to be `balanced' w.r.t. the other input files. This is a linear
(amplitude) adjustment, so a number less than 1 decreases the volume and a number
greater than 1 increases it. If a negative number is given then in addition to the
volume adjustment, the audio signal will be inverted.
See also the norm, vol, and gain effects, and see Input File Balancing above.
Input & Output File Format Options
These options apply to the input or output file whose name they immediately precede on the
command line and are used mainly when working with headerless file formats or when
specifying a format for the output file that is different to that of the input file.
-b BITS, --bits BITS
The number of bits (a.k.a. bit-depth or sometimes word-length) in each encoded
sample. Not applicable to complex encodings such as MP3 or GSM. Not necessary
with encodings that have a fixed number of bits, e.g. A/μ-law, ADPCM.
For an input file, the most common use for this option is to inform SoX of the
number of bits per sample in a `raw' (`headerless') audio file. For example
sox -r 16k -e signed -b 8 input.raw output.wav
converts a particular `raw' file to a self-describing `WAV' file.
For an output file, this option can be used (perhaps along with -e) to set the
output encoding size. By default (i.e. if this option is not given), the output
encoding size will (providing it is supported by the output file type) be set to
the input encoding size. For example
sox input.cdda -b 24 output.wav
converts raw CD digital audio (16-bit, signed-integer) to a 24-bit (signed-integer)
`WAV' file.
-c CHANNELS, --channels CHANNELS
The number of audio channels in the audio file. This can be any number greater than
zero.
For an input file, the most common use for this option is to inform SoX of the
number of channels in a `raw' (`headerless') audio file. Occasionally, it may be
useful to use this option with a `headered' file, in order to override the
(presumably incorrect) value in the header - note that this is only supported with
certain file types. Examples:
sox -r 48k -e float -b 32 -c 2 input.raw output.wav
converts a particular `raw' file to a self-describing `WAV' file.
play -c 1 music.wav
interprets the file data as belonging to a single channel regardless of what is
indicated in the file header. Note that if the file does in fact have two
channels, this will result in the file playing at half speed.
For an output file, this option provides a shorthand for specifying that the
channels effect should be invoked in order to change (if necessary) the number of
channels in the audio signal to the number given. For example, the following two
commands are equivalent:
sox input.wav -c 1 output.wav bass -b 24
sox input.wav output.wav bass -b 24 channels 1
though the second form is more flexible as it allows the effects to be ordered
arbitrarily.
-e ENCODING, --encoding ENCODING
The audio encoding type. Sometimes needed with file-types that support more than
one encoding type. For example, with raw, WAV, or AU (but not, for example, with
MP3 or FLAC). The available encoding types are as follows:
signed-integer
PCM data stored as signed (`two's complement') integers. Commonly used with
a 16 or 24 -bit encoding size. A value of 0 represents minimum signal
power.
unsigned-integer
PCM data stored as unsigned integers. Commonly used with an 8-bit encoding
size. A value of 0 represents maximum signal power.
floating-point
PCM data stored as IEEE 753 single precision (32-bit) or double precision
(64-bit) floating-point (`real') numbers. A value of 0 represents minimum
signal power.
a-law International telephony standard for logarithmic encoding to 8 bits per
sample. It has a precision equivalent to roughly 13-bit PCM and is
sometimes encoded with reversed bit-ordering (see the -X option).
u-law, mu-law
North American telephony standard for logarithmic encoding to 8 bits per
sample. A.k.a. μ-law. It has a precision equivalent to roughly 14-bit PCM
and is sometimes encoded with reversed bit-ordering (see the -X option).
oki-adpcm
OKI (a.k.a. VOX, Dialogic, or Intel) 4-bit ADPCM; it has a precision
equivalent to roughly 12-bit PCM. ADPCM is a form of audio compression that
has a good compromise between audio quality and encoding/decoding speed.
ima-adpcm
IMA (a.k.a. DVI) 4-bit ADPCM; it has a precision equivalent to roughly
13-bit PCM.
ms-adpcm
Microsoft 4-bit ADPCM; it has a precision equivalent to roughly 14-bit PCM.
gsm-full-rate
GSM is currently used for the vast majority of the world's digital wireless
telephone calls. It utilises several audio formats with different bit-rates
and associated speech quality. SoX has support for GSM's original 13kbps
`Full Rate' audio format. It is usually CPU-intensive to work with GSM
audio.
Encoding names can be abbreviated where this would not be ambiguous; e.g.
`unsigned-integer' can be given as `un', but not `u' (ambiguous with `u-law').
For an input file, the most common use for this option is to inform SoX of the
encoding of a `raw' (`headerless') audio file (see the examples in -b and -c
above).
For an output file, this option can be used (perhaps along with -b) to set the
output encoding type For example
sox input.cdda -e float output1.wav
sox input.cdda -b 64 -e float output2.wav
convert raw CD digital audio (16-bit, signed-integer) to floating-point `WAV' files
(single & double precision respectively).
By default (i.e. if this option is not given), the output encoding type will
(providing it is supported by the output file type) be set to the input encoding
type.
--no-glob
Specifies that filename `globbing' (wild-card matching) should not be performed by
SoX on the following filename. For example, if the current directory contains the
two files `five-seconds.wav' and `five*.wav', then
play --no-glob "five*.wav"
can be used to play just the single file `five*.wav'.
-r, --rate RATE[k]
Gives the sample rate in Hz (or kHz if appended with `k') of the file.
For an input file, the most common use for this option is to inform SoX of the
sample rate of a `raw' (`headerless') audio file (see the examples in -b and -c
above). Occasionally it may be useful to use this option with a `headered' file,
in order to override the (presumably incorrect) value in the header - note that
this is only supported with certain file types. For example, if audio was recorded
with a sample-rate of say 48k from a source that played back a little, say 1.5%,
too slowly, then
sox -r 48720 input.wav output.wav
effectively corrects the speed by changing only the file header (but see also the
speed effect for the more usual solution to this problem).
For an output file, this option provides a shorthand for specifying that the rate
effect should be invoked in order to change (if necessary) the sample rate of the
audio signal to the given value. For example, the following two commands are
equivalent:
sox input.wav -r 48k output.wav bass -b 24
sox input.wav output.wav bass -b 24 rate 48k
though the second form is more flexible as it allows rate options to be given, and
allows the effects to be ordered arbitrarily.
-t, --type FILE-TYPE
Gives the type of the audio file. For both input and output files, this option is
commonly used to inform SoX of the type a `headerless' audio file (e.g. raw, mp3)
where the actual/desired type cannot be determined from a given filename extension.
For example:
another-command | sox -t mp3 - output.wav
sox input.wav -t raw output.bin
It can also be used to override the type implied by an input filename extension,
but if overriding with a type that has a header, SoX will exit with an appropriate
error message if such a header is not actually present.
See soxformat(7) for a list of supported file types.
-L, --endian little
-B, --endian big
-x, --endian swap
These options specify whether the byte-order of the audio data is, respectively,
`little endian', `big endian', or the opposite to that of the system on which SoX
is being used. Endianness applies only to data encoded as floating-point, or as
signed or unsigned integers of 16 or more bits. It is often necessary to specify
one of these options for headerless files, and sometimes necessary for (otherwise)
self-describing files. A given endian-setting option may be ignored for an input
file whose header contains a specific endianness identifier, or for an output file
that is actually an audio device.
N.B. Unlike other format characteristics, the endianness (byte, nibble, & bit
ordering) of the input file is not automatically used for the output file; so, for
example, when the following is run on a little-endian system:
sox -B audio.s16 trimmed.s16 trim 2
trimmed.s16 will be created as little-endian;
sox -B audio.s16 -B trimmed.s16 trim 2
must be used to preserve big-endianness in the output file.
The -V option can be used to check the selected orderings.
-N, --reverse-nibbles
Specifies that the nibble ordering (i.e. the 2 halves of a byte) of the samples
should be reversed; sometimes useful with ADPCM-based formats.
N.B. See also N.B. in section on -x above.
-X, --reverse-bits
Specifies that the bit ordering of the samples should be reversed; sometimes useful
with a few (mostly headerless) formats.
N.B. See also N.B. in section on -x above.
Output File Format Options
These options apply only to the output file and may precede only the output filename on
the command line.
--add-comment TEXT
Append a comment in the output file header (where applicable).
--comment TEXT
Specify the comment text to store in the output file header (where applicable).
SoX will provide a default comment if this option (or --comment-file) is not given.
To specify that no comment should be stored in the output file, use --comment "" .
--comment-file FILENAME
Specify a file containing the comment text to store in the output file header
(where applicable).
-C, --compression FACTOR
The compression factor for variably compressing output file formats. If this
option is not given then a default compression factor will apply. The compression
factor is interpreted differently for different compressing file formats. See the
description of the file formats that use this option in soxformat(7) for more
information.
EFFECTS
In addition to converting, playing and recording audio files, SoX can be used to invoke a
number of audio `effects'. Multiple effects may be applied by specifying them one after
another at the end of the SoX command line, forming an `effects chain'. Note that
applying multiple effects in real-time (i.e. when playing audio) is likely to require a
high performance computer. Stopping other applications may alleviate performance issues
should they occur.
Some of the SoX effects are primarily intended to be applied to a single instrument or
`voice'. To facilitate this, the remix effect and the global SoX option -M can be used to
isolate then recombine tracks from a multi-track recording.
Multiple Effects Chains
A single effects chain is made up of one or more effects. Audio from the input runs
through the chain until either the end of the input file is reached or an effect in the
chain requests to terminate the chain.
SoX supports running multiple effects chains over the input audio. In this case, when one
chain indicates it is done processing audio, the audio data is then sent through the next
effects chain. This continues until either no more effects chains exist or the input has
reached the end of the file.
An effects chain is terminated by placing a : (colon) after an effect. Any following
effects are a part of a new effects chain.
It is important to place the effect that will stop the chain as the first effect in the
chain. This is because any samples that are buffered by effects to the left of the
terminating effect will be discarded. The amount of samples discarded is related to the
--buffer option and it should be kept small, relative to the sample rate, if the
terminating effect cannot be first. Further information on stopping effects can be found
in the Stopping SoX section.
There are a few pseudo-effects that aid using multiple effects chains. These include
newfile which will start writing to a new output file before moving to the next effects
chain and restart which will move back to the first effects chain. Pseudo-effects must be
specified as the first effect in a chain and as the only effect in a chain (they must have
a : before and after they are specified).
The following is an example of multiple effects chains. It will split the input file into
multiple files of 30 seconds in length. Each output filename will have unique number in
its name as documented in the Output Files section.
sox infile.wav output.wav trim 0 30 : newfile : restart
Common Notation And Parameters
In the descriptions that follow, brackets [ ] are used to denote parameters that are
optional, braces { } to denote those that are both optional and repeatable, and angle
brackets < > to denote those that are repeatable but not optional. Where applicable,
default values for optional parameters are shown in parenthesis ( ).
The following parameters are used with, and have the same meaning for, several effects:
center[k]
See frequency.
frequency[k]
A frequency in Hz, or, if appended with `k', kHz.
gain A power gain in dB. Zero gives no gain; less than zero gives an attenuation.
position
A position within the audio stream; the syntax is [=|+|-]timespec, where timespec
is a time specification (see below). The optional first character indicates
whether the timespec is to be interpreted relative to the start (=) or end (-) of
audio, or to the previous position if the effect accepts multiple position
arguments (+). The audio length must be known for end-relative locations to work;
some effects do accept -0 for end-of-audio, though, even if the length is unknown.
Which of =, +, - is the default depends on the effect and is shown in its syntax
as, e.g., position(+).
Examples: =2:00 (two minutes into the audio stream), -100s (one hundred samples
before the end of audio), +0:12+10s (twelve seconds and ten samples after the
previous position), -0.5+1s (one sample less than half a second before the end of
audio).
width[h|k|o|q]
Used to specify the band-width of a filter. A number of different methods to
specify the width are available (though not all for every effect). One of the
characters shown may be appended to select the desired method as follows:
Method Notes
h Hz
k kHz
o Octaves
q Q-factor See [2]
For each effect that uses this parameter, the default method (i.e. if no character
is appended) is the one that it listed first in the first line of the effect's
description.
Most effects that expect an audio position or duration in a parameter, i.e. a time
specification, accept either of the following two forms:
[[hours:]minutes:]seconds[.frac][t]
A specification of `1:30.5' corresponds to one minute, thirty and ½ seconds. The t
suffix is entirely optional (however, see the silence effect for an exception).
Note that the component values do not have to be normalized; e.g., `1:23:45',
`83:45', `79:0285', `1:0:1425', `1::1425' and `5025' all are legal and equivalent
to each other.
sampless
Specifies the number of samples directly, as in `8000s'. For large sample counts,
e notation is supported: `1.7e6s' is the same as `1700000s'.
Time specifications can also be chained with + or - into a new time specification where
the right part is added to or subtracted from the left, respectively: `3:00-200s' means
two hundred samples less than three minutes.
To see if SoX has support for an optional effect, enter sox -h and look for its name under
the list: `EFFECTS'.
Supported Effects
Note: a categorised list of the effects can be found in the accompanying `README' file.
allpass frequency[k] width[h|k|o|q]
Apply a two-pole all-pass filter with central frequency (in Hz) frequency, and
filter-width width. An all-pass filter changes the audio's frequency to phase
relationship without changing its frequency to amplitude relationship. The filter
is described in detail in [1].
This effect supports the --plot global option.
band [-n] center[k] [width[h|k|o|q]]
Apply a band-pass filter. The frequency response drops logarithmically around the
center frequency. The width parameter gives the slope of the drop. The
frequencies at center + width and center - width will be half of their original
amplitudes. band defaults to a mode oriented to pitched audio, i.e. voice,
singing, or instrumental music. The -n (for noise) option uses the alternate mode
for un-pitched audio (e.g. percussion). Warning: -n introduces a power-gain of
about 11dB in the filter, so beware of output clipping. band introduces noise in
the shape of the filter, i.e. peaking at the center frequency and settling around
it.
This effect supports the --plot global option.
See also sinc for a bandpass filter with steeper shoulders.
bandpass|bandreject [-c] frequency[k] width[h|k|o|q]
Apply a two-pole Butterworth band-pass or band-reject filter with central frequency
frequency, and (3dB-point) band-width width. The -c option applies only to
bandpass and selects a constant skirt gain (peak gain = Q) instead of the default:
constant 0dB peak gain. The filters roll off at 6dB per octave (20dB per decade)
and are described in detail in [1].
These effects support the --plot global option.
See also sinc for a bandpass filter with steeper shoulders.
bandreject frequency[k] width[h|k|o|q]
Apply a band-reject filter. See the description of the bandpass effect for
details.
bass|treble gain [frequency[k] [width[s|h|k|o|q]]]
Boost or cut the bass (lower) or treble (upper) frequencies of the audio using a
two-pole shelving filter with a response similar to that of a standard hi-fi's
tone-controls. This is also known as shelving equalisation (EQ).
gain gives the gain at 0 Hz (for bass), or whichever is the lower of ∼22 kHz and
the Nyquist frequency (for treble). Its useful range is about -20 (for a large
cut) to +20 (for a large boost). Beware of Clipping when using a positive gain.
If desired, the filter can be fine-tuned using the following optional parameters:
frequency sets the filter's central frequency and so can be used to extend or
reduce the frequency range to be boosted or cut. The default value is 100 Hz (for
bass) or 3 kHz (for treble).
width determines how steep is the filter's shelf transition. In addition to the
common width specification methods described above, `slope' (the default, or if
appended with `s') may be used. The useful range of `slope' is about 0.3, for a
gentle slope, to 1 (the maximum), for a steep slope; the default value is 0.5.
The filters are described in detail in [1].
These effects support the --plot global option.
See also equalizer for a peaking equalisation effect.
bend [-f frame-rate(25)] [-o over-sample(16)] { start-position(+),cents,end-position(+) }
Changes pitch by specified amounts at specified times. Each given triple: start-
position,cents,end-position specifies one bend. cents is the number of cents (100
cents = 1 semitone) by which to bend the pitch. The other values specify the points
in time at which to start and end bending the pitch, respectively.
The pitch-bending algorithm utilises the Discrete Fourier Transform (DFT) at a
particular frame rate and over-sampling rate. The -f and -o parameters may be used
to adjust these parameters and thus control the smoothness of the changes in pitch.
For example, an initial tone is generated, then bent three times, yielding four
different notes in total:
play -n synth 2.5 sin 667 gain 1 \
bend .35,180,.25 .15,740,.53 0,-520,.3
Here, the first bend runs from 0.35 to 0.6, and the second one from 0.75 to 1.28
seconds. Note that the clipping that is produced in this example is deliberate; to
remove it, use gain -5 in place of gain 1.
See also pitch.
biquad b0 b1 b2 a0 a1 a2
Apply a biquad IIR filter with the given coefficients. Where b* and a* are the
numerator and denominator coefficients respectively.
See http://en.wikipedia.org/wiki/Digital_biquad_filter (where a0 = 1).
This effect supports the --plot global option.
channels CHANNELS
Invoke a simple algorithm to change the number of channels in the audio signal to
the given number CHANNELS: mixing if decreasing the number of channels or
duplicating if increasing the number of channels.
The channels effect is invoked automatically if SoX's -c option specifies a number
of channels that is different to that of the input file(s). Alternatively, if this
effect is given explicitly, then SoX's -c option need not be given. For example,
the following two commands are equivalent:
sox input.wav -c 1 output.wav bass -b 24
sox input.wav output.wav bass -b 24 channels 1
though the second form is more flexible as it allows the effects to be ordered
arbitrarily.
See also remix for an effect that allows channels to be mixed/selected arbitrarily.
chorus gain-in gain-out <delay decay speed depth -s|-t>
Add a chorus effect to the audio. This can make a single vocal sound like a
chorus, but can also be applied to instrumentation.
Chorus resembles an echo effect with a short delay, but whereas with echo the delay
is constant, with chorus, it is varied using sinusoidal or triangular modulation.
The modulation depth defines the range the modulated delay is played before or
after the delay. Hence the delayed sound will sound slower or faster, that is the
delayed sound tuned around the original one, like in a chorus where some vocals are
slightly off key. See [3] for more discussion of the chorus effect.
Each four-tuple parameter delay/decay/speed/depth gives the delay in milliseconds
and the decay (relative to gain-in) with a modulation speed in Hz using depth in
milliseconds. The modulation is either sinusoidal (-s) or triangular (-t). Gain-
out is the volume of the output.
A typical delay is around 40ms to 60ms; the modulation speed is best near 0.25Hz
and the modulation depth around 2ms. For example, a single delay:
play guitar1.wav chorus 0.7 0.9 55 0.4 0.25 2 -t
Two delays of the original samples:
play guitar1.wav chorus 0.6 0.9 50 0.4 0.25 2 -t \
60 0.32 0.4 1.3 -s
A fuller sounding chorus (with three additional delays):
play guitar1.wav chorus 0.5 0.9 50 0.4 0.25 2 -t \
60 0.32 0.4 2.3 -t 40 0.3 0.3 1.3 -s
compand attack1,decay1{,attack2,decay2}
[soft-knee-dB:]in-dB1[,out-dB1]{,in-dB2,out-dB2}
[gain [initial-volume-dB [delay]]]
Compand (compress or expand) the dynamic range of the audio.
The attack and decay parameters (in seconds) determine the time over which the
instantaneous level of the input signal is averaged to determine its volume;
attacks refer to increases in volume and decays refer to decreases. For most
situations, the attack time (response to the music getting louder) should be
shorter than the decay time because the human ear is more sensitive to sudden loud
music than sudden soft music. Where more than one pair of attack/decay parameters
are specified, each input channel is companded separately and the number of pairs
must agree with the number of input channels. Typical values are 0.3,0.8 seconds.
The second parameter is a list of points on the compander's transfer function
specified in dB relative to the maximum possible signal amplitude. The input
values must be in a strictly increasing order but the transfer function does not
have to be monotonically rising. If omitted, the value of out-dB1 defaults to the
same value as in-dB1; levels below in-dB1 are not companded (but may have gain
applied to them). The point 0,0 is assumed but may be overridden (by 0,out-dBn).
If the list is preceded by a soft-knee-dB value, then the points at where adjacent
line segments on the transfer function meet will be rounded by the amount given.
Typical values for the transfer function are 6:-70,-60,-20.
The third (optional) parameter is an additional gain in dB to be applied at all
points on the transfer function and allows easy adjustment of the overall gain.
The fourth (optional) parameter is an initial level to be assumed for each channel
when companding starts. This permits the user to supply a nominal level initially,
so that, for example, a very large gain is not applied to initial signal levels
before the companding action has begun to operate: it is quite probable that in
such an event, the output would be severely clipped while the compander gain
properly adjusts itself. A typical value (for audio which is initially quiet) is
-90 dB.
The fifth (optional) parameter is a delay in seconds. The input signal is analysed
immediately to control the compander, but it is delayed before being fed to the
volume adjuster. Specifying a delay approximately equal to the attack/decay times
allows the compander to effectively operate in a `predictive' rather than a
reactive mode. A typical value is 0.2 seconds.
* * *
The following example might be used to make a piece of music with both quiet and
loud passages suitable for listening to in a noisy environment such as a moving
vehicle:
sox asz.wav asz-car.wav compand 0.3,1 6:-70,-60,-20 -5 -90 0.2
The transfer function (`6:-70,...') says that very soft sounds (below -70dB) will
remain unchanged. This will stop the compander from boosting the volume on
`silent' passages such as between movements. However, sounds in the range -60dB to
0dB (maximum volume) will be boosted so that the 60dB dynamic range of the original
music will be compressed 3-to-1 into a 20dB range, which is wide enough to enjoy
the music but narrow enough to get around the road noise. The `6:' selects 6dB
soft-knee companding. The -5 (dB) output gain is needed to avoid clipping (the
number is inexact, and was derived by experimentation). The -90 (dB) for the
initial volume will work fine for a clip that starts with near silence, and the
delay of 0.2 (seconds) has the effect of causing the compander to react a bit more
quickly to sudden volume changes.
In the next example, compand is being used as a noise-gate for when the noise is at
a lower level than the signal:
play infile compand .1,.2 -inf,-50.1,-inf,-50,-50 0 -90 .1
Here is another noise-gate, this time for when the noise is at a higher level than
the signal (making it, in some ways, similar to squelch):
play infile compand .1,.1 -45.1,-45,-inf,0,-inf 45 -90 .1
This effect supports the --plot global option (for the transfer function).
See also mcompand for a multiple-band companding effect.
contrast [enhancement-amount(75)]
Comparable with compression, this effect modifies an audio signal to make it sound
louder. enhancement-amount controls the amount of the enhancement and is a number
in the range 0-100. Note that enhancement-amount = 0 still gives a significant
contrast enhancement.
See also the compand and mcompand effects.
dcshift shift [limitergain]
Apply a DC shift to the audio. This can be useful to remove a DC offset (caused
perhaps by a hardware problem in the recording chain) from the audio. The effect
of a DC offset is reduced headroom and hence volume. The stat or stats effect can
be used to determine if a signal has a DC offset.
The given dcshift value is a floating point number in the range of ±2 that
indicates the amount to shift the audio (which is in the range of ±1).
An optional limitergain can be specified as well. It should have a value much less
than 1 (e.g. 0.05 or 0.02) and is used only on peaks to prevent clipping.
* * *
An alternative approach to removing a DC offset (albeit with a short delay) is to
use the highpass filter effect at a frequency of say 10Hz, as illustrated in the
following example:
sox -n dc.wav synth 5 sin %0 50
sox dc.wav fixed.wav highpass 10
deemph Apply Compact Disc (IEC 60908) de-emphasis (a treble attenuation shelving filter).
Pre-emphasis was applied in the mastering of some CDs issued in the early 1980s.
These included many classical music albums, as well as now sought-after issues of
albums by The Beatles, Pink Floyd and others. Pre-emphasis should be removed at
playback time by a de-emphasis filter in the playback device. However, not all
modern CD players have this filter, and very few PC CD drives have it; playing pre-
emphasised audio without the correct de-emphasis filter results in audio that
sounds harsh and is far from what its creators intended.
With the deemph effect, it is possible to apply the necessary de-emphasis to audio
that has been extracted from a pre-emphasised CD, and then either burn the de-
emphasised audio to a new CD (which will then play correctly on any CD player), or
simply play the correctly de-emphasised audio files on the PC. For example:
sox track1.wav track1-deemph.wav deemph
and then burn track1-deemph.wav to CD, or
play track1-deemph.wav
or simply
play track1.wav deemph
The de-emphasis filter is implemented as a biquad and requires the input audio
sample rate to be either 44.1kHz or 48kHz. Maximum deviation from the ideal
response is only 0.06dB (up to 20kHz).
This effect supports the --plot global option.
See also the bass and treble shelving equalisation effects.
delay {position(=)}
Delay one or more audio channels such that they start at the given position. For
example, delay 1.5 +1 3000s delays the first channel by 1.5 seconds, the second
channel by 2.5 seconds (one second more than the previous channel), the third
channel by 3000 samples, and leaves any other channels that may be present un-
delayed. The following (one long) command plays a chime sound:
play -n synth -j 3 sin %3 sin %-2 sin %-5 sin %-9 \
sin %-14 sin %-21 fade h .01 2 1.5 delay \
1.3 1 .76 .54 .27 remix - fade h 0 2.7 2.5 norm -1
and this plays a guitar chord:
play -n synth pl G2 pl B2 pl D3 pl G3 pl D4 pl G4 \
delay 0 .05 .1 .15 .2 .25 remix - fade 0 4 .1 norm -1
dither [-S|-s|-f filter] [-a] [-p precision]
Apply dithering to the audio. Dithering deliberately adds a small amount of noise
to the signal in order to mask audible quantization effects that can occur if the
output sample size is less than 24 bits. With no options, this effect will add
triangular (TPDF) white noise. Noise-shaping (only for certain sample rates) can
be selected with -s. With the -f option, it is possible to select a particular
noise-shaping filter from the following list: lipshitz, f-weighted, modified-e-
weighted, improved-e-weighted, gesemann, shibata, low-shibata, high-shibata. Note
that most filter types are available only with 44100Hz sample rate. The filter
types are distinguished by the following properties: audibility of noise, level of
(inaudible, but in some circumstances, otherwise problematic) shaped high frequency
noise, and processing speed.
See http://sox.sourceforge.net/SoX/NoiseShaping for graphs of the different noise-
shaping curves.
The -S option selects a slightly `sloped' TPDF, biased towards higher frequencies.
It can be used at any sampling rate but below ≈22k, plain TPDF is probably better,
and above ≈ 37k, noise-shaping (if available) is probably better.
The -a option enables a mode where dithering (and noise-shaping if applicable) are
automatically enabled only when needed. The most likely use for this is when
applying fade in or out to an already dithered file, so that the redithering
applies only to the faded portions. However, auto dithering is not fool-proof, so
the fades should be carefully checked for any noise modulation; if this occurs,
then either re-dither the whole file, or use trim, fade, and concatencate.
The -p option allows overriding the target precision.
If the SoX global option -R option is not given, then the pseudo-random number
generator used to generate the white noise will be `reseeded', i.e. the generated
noise will be different between invocations.
This effect should not be followed by any other effect that affects the audio.
See also the `Dithering' section above.
downsample [factor(2)]
Downsample the signal by an integer factor: Only the first out of each factor
samples is retained, the others are discarded.
No decimation filter is applied. If the input is not a properly bandlimited
baseband signal, aliasing will occur. This may be desirable, e.g., for frequency
translation.
For a general resampling effect with anti-aliasing, see rate. See also upsample.
earwax Makes audio easier to listen to on headphones. Adds `cues' to 44.1kHz stereo (i.e.
audio CD format) audio so that when listened to on headphones the stereo image is
moved from inside your head (standard for headphones) to outside and in front of
the listener (standard for speakers).
echo gain-in gain-out <delay decay>
Add echoing to the audio. Echoes are reflected sound and can occur naturally
amongst mountains (and sometimes large buildings) when talking or shouting; digital
echo effects emulate this behaviour and are often used to help fill out the sound
of a single instrument or vocal. The time difference between the original signal
and the reflection is the `delay' (time), and the loudness of the reflected signal
is the `decay'. Multiple echoes can have different delays and decays.
Each given delay decay pair gives the delay in milliseconds and the decay (relative
to gain-in) of that echo. Gain-out is the volume of the output. For example: This
will make it sound as if there are twice as many instruments as are actually
playing:
play lead.aiff echo 0.8 0.88 60 0.4
If the delay is very short, then it sound like a (metallic) robot playing music:
play lead.aiff echo 0.8 0.88 6 0.4
A longer delay will sound like an open air concert in the mountains:
play lead.aiff echo 0.8 0.9 1000 0.3
One mountain more, and:
play lead.aiff echo 0.8 0.9 1000 0.3 1800 0.25
echos gain-in gain-out <delay decay>
Add a sequence of echoes to the audio. Each delay decay pair gives the delay in
milliseconds and the decay (relative to gain-in) of that echo. Gain-out is the
volume of the output.
Like the echo effect, echos stand for `ECHO in Sequel', that is the first echos
takes the input, the second the input and the first echos, the third the input and
the first and the second echos, ... and so on. Care should be taken using many
echos; a single echos has the same effect as a single echo.
The sample will be bounced twice in symmetric echos:
play lead.aiff echos 0.8 0.7 700 0.25 700 0.3
The sample will be bounced twice in asymmetric echos:
play lead.aiff echos 0.8 0.7 700 0.25 900 0.3
The sample will sound as if played in a garage:
play lead.aiff echos 0.8 0.7 40 0.25 63 0.3
equalizer frequency[k] width[q|o|h|k] gain
Apply a two-pole peaking equalisation (EQ) filter. With this filter, the signal-
level at and around a selected frequency can be increased or decreased, whilst
(unlike band-pass and band-reject filters) that at all other frequencies is
unchanged.
frequency gives the filter's central frequency in Hz, width, the band-width, and
gain the required gain or attenuation in dB. Beware of Clipping when using a
positive gain.
In order to produce complex equalisation curves, this effect can be given several
times, each with a different central frequency.
The filter is described in detail in [1].
This effect supports the --plot global option.
See also bass and treble for shelving equalisation effects.
fade [type] fade-in-length [stop-position(=) [fade-out-length]]
Apply a fade effect to the beginning, end, or both of the audio.
An optional type can be specified to select the shape of the fade curve: q for
quarter of a sine wave, h for half a sine wave, t for linear (`triangular') slope,
l for logarithmic, and p for inverted parabola. The default is logarithmic.
A fade-in starts from the first sample and ramps the signal level from 0 to full
volume over the time given as fade-in-length. Specify 0 if no fade-in is wanted.
For fade-outs, the audio will be truncated at stop-position and the signal level
will be ramped from full volume down to 0 over an interval of fade-out-length
before the stop-position. If fade-out-length is not specified, it defaults to the
same value as fade-in-length. No fade-out is performed if stop-position is not
specified. If the audio length can be determined from the input file header and
any previous effects, then -0 (or, for historical reasons, 0) may be specified for
stop-position to indicate the usual case of a fade-out that ends at the end of the
input audio stream.
Any time specification may be used for fade-in-length and fade-out-length.
See also the splice effect.
fir [coefs-file|coefs]
Use SoX's FFT convolution engine with given FIR filter coefficients. If a single
argument is given then this is treated as the name of a file containing the filter
coefficients (white-space separated; may contain `#' comments). If the given
filename is `-', or if no argument is given, then the coefficients are read from
the `standard input' (stdin); otherwise, coefficients may be given on the command
line. Examples:
sox infile outfile fir 0.0195 -0.082 0.234 0.891 -0.145 0.043
sox infile outfile fir coefs.txt
with coefs.txt containing
# HP filter
# freq=10000
1.2311233052619888e-01
-4.4777096106211783e-01
5.1031563346705155e-01
-6.6502926320995331e-02
...
This effect supports the --plot global option.
flanger [delay depth regen width speed shape phase interp]
Apply a flanging effect to the audio. See [3] for a detailed description of
flanging.
All parameters are optional (right to left).
Range Default Description
delay 0 - 30 0 Base delay in milliseconds.
depth 0 - 10 2 Added swept delay in milliseconds.
regen -95 - 95 0 Percentage regeneration (delayed
signal feedback).
width 0 - 100 71 Percentage of delayed signal mixed
with original.
speed 0.1 - 10 0.5 Sweeps per second (Hz).
shape sin Swept wave shape: sine|triangle.
phase 0 - 100 25 Swept wave percentage phase-shift
for multi-channel (e.g. stereo)
flange; 0 = 100 = same phase on
each channel.
interp lin Digital delay-line interpolation:
linear|quadratic.
gain [-e|-B|-b|-r] [-n] [-l|-h] [gain-dB]
Apply amplification or attenuation to the audio signal, or, in some cases, to some
of its channels. Note that use of any of -e, -B, -b, -r, or -n requires temporary
file space to store the audio to be processed, so may be unsuitable for use with
`streamed' audio.
Without other options, gain-dB is used to adjust the signal power level by the
given number of dB: positive amplifies (beware of Clipping), negative attenuates.
With other options, the gain-dB amplification or attenuation is (logically) applied
after the processing due to those options.
Given the -e option, the levels of the audio channels of a multi-channel file are
`equalised', i.e. gain is applied to all channels other than that with the highest
peak level, such that all channels attain the same peak level (but, without also
giving -n, the audio is not `normalised').
The -B (balance) option is similar to -e, but with -B, the RMS level is used
instead of the peak level. -B might be used to correct stereo imbalance caused by
an imperfect record turntable cartridge. Note that unlike -e, -B might cause some
clipping.
-b is similar to -B but has clipping protection, i.e. if necessary to prevent
clipping whilst balancing, attenuation is applied to all channels. Note, however,
that in conjunction with -n, -B and -b are synonymous.
The -r option is used in conjunction with a prior invocation of gain with the -h
option - see below for details.
The -n option normalises the audio to 0dB FSD; it is often used in conjunction with
a negative gain-dB to the effect that the audio is normalised to a given level
below 0dB. For example,
sox infile outfile gain -n
normalises to 0dB, and
sox infile outfile gain -n -3
normalises to -3dB.
The -l option invokes a simple limiter, e.g.
sox infile outfile gain -l 6
will apply 6dB of gain but never clip. Note that limiting more than a few dBs more
than occasionally (in a piece of audio) is not recommended as it can cause audible
distortion. See the compand effect for a more capable limiter.
The -h option is used to apply gain to provide head-room for subsequent processing.
For example, with
sox infile outfile gain -h bass +6
6dB of attenuation will be applied prior to the bass boosting effect thus ensuring
that it will not clip. Of course, with bass, it is obvious how much headroom will
be needed, but with other effects (e.g. rate, dither) it is not always as clear.
Another advantage of using gain -h rather than an explicit attenuation, is that if
the headroom is not used by subsequent effects, it can be reclaimed with gain -r,
for example:
sox infile outfile gain -h bass +6 rate 44100 gain -r
The above effects chain guarantees never to clip nor amplify; it attenuates if
necessary to prevent clipping, but by only as much as is needed to do so.
Output formatting (dithering and bit-depth reduction) also requires headroom (which
cannot be `reclaimed'), e.g.
sox infile outfile gain -h bass +6 rate 44100 gain -rh dither
Here, the second gain invocation, reclaims as much of the headroom as it can from
the preceding effects, but retains as much headroom as is needed for subsequent
processing. The SoX global option -G can be given to automatically invoke gain -h
and gain -r.
See also the norm and vol effects.
highpass|lowpass [-1|-2] frequency[k] [width[q|o|h|k]]
Apply a high-pass or low-pass filter with 3dB point frequency. The filter can be
either single-pole (with -1), or double-pole (the default, or with -2). width
applies only to double-pole filters; the default is Q = 0.707 and gives a
Butterworth response. The filters roll off at 6dB per pole per octave (20dB per
pole per decade). The double-pole filters are described in detail in [1].
These effects support the --plot global option.
See also sinc for filters with a steeper roll-off.
hilbert [-n taps]
Apply an odd-tap Hilbert transform filter, phase-shifting the signal by 90 degrees.
This is used in many matrix coding schemes and for analytic signal generation. The
process is often written as a multiplication by i (or j), the imaginary unit.
An odd-tap Hilbert transform filter has a bandpass characteristic, attenuating the
lowest and highest frequencies. Its bandwidth can be controlled by the number of
filter taps, which can be specified with -n. By default, the number of taps is
chosen for a cutoff frequency of about 75 Hz.
This effect supports the --plot global option.
ladspa [-l|-r] module [plugin] [argument ...]
Apply a LADSPA [5] (Linux Audio Developer's Simple Plugin API) plugin. Despite the
name, LADSPA is not Linux-specific, and a wide range of effects is available as
LADSPA plugins, such as cmt [6] (the Computer Music Toolkit) and Steve Harris's
plugin collection [7]. The first argument is the plugin module, the second the name
of the plugin (a module can contain more than one plugin), and any other arguments
are for the control ports of the plugin. Missing arguments are supplied by default
values if possible.
Normally, the number of input ports of the plugin must match the number of input
channels, and the number of output ports determines the output channel count.
However, the -r (replicate) option allows cloning a mono plugin to handle multi-
channel input.
Some plugins introduce latency which SoX may optionally compensate for. The -l
(latency compensation) option automatically compensates for latency as reported by
the plugin via an output control port named "latency".
If found, the environment variable LADSPA_PATH will be used as search path for
plugins.
loudness [gain [reference]]
Loudness control - similar to the gain effect, but provides equalisation for the
human auditory system. See http://en.wikipedia.org/wiki/Loudness for a detailed
description of loudness. The gain is adjusted by the given gain parameter (usually
negative) and the signal equalised according to ISO 226 w.r.t. a reference level of
65dB, though an alternative reference level may be given if the original audio has
been equalised for some other optimal level. A default gain of -10dB is used if a
gain value is not given.
See also the gain effect.
lowpass [-1|-2] frequency[k] [width[q|o|h|k]]
Apply a low-pass filter. See the description of the highpass effect for details.
mcompand "attack1,decay1{,attack2,decay2}
[soft-knee-dB:]in-dB1[,out-dB1]{,in-dB2,out-dB2}
[gain [initial-volume-dB [delay]]]" {crossover-freq[k] "attack1,..."}
The multi-band compander is similar to the single-band compander but the audio is
first divided into bands using Linkwitz-Riley cross-over filters and a separately
specifiable compander run on each band. See the compand effect for the definition
of its parameters. Compand parameters are specified between double quotes and the
crossover frequency for that band is given by crossover-freq; these can be repeated
to create multiple bands.
For example, the following (one long) command shows how multi-band companding is
typically used in FM radio:
play track1.wav gain -3 sinc 8000- 29 100 mcompand \
"0.005,0.1 -47,-40,-34,-34,-17,-33" 100 \
"0.003,0.05 -47,-40,-34,-34,-17,-33" 400 \
"0.000625,0.0125 -47,-40,-34,-34,-15,-33" 1600 \
"0.0001,0.025 -47,-40,-34,-34,-31,-31,-0,-30" 6400 \
"0,0.025 -38,-31,-28,-28,-0,-25" \
gain 15 highpass 22 highpass 22 sinc -n 255 -b 16 -17500 \
gain 9 lowpass -1 17801
The audio file is played with a simulated FM radio sound (or broadcast signal
condition if the lowpass filter at the end is skipped). Note that the pipeline is
set up with US-style 75us pre-emphasis.
See also compand for a single-band companding effect.
noiseprof [profile-file]
Calculate a profile of the audio for use in noise reduction. See the description
of the noisered effect for details.
noisered [profile-file [amount]]
Reduce noise in the audio signal by profiling and filtering. This effect is
moderately effective at removing consistent background noise such as hiss or hum.
To use it, first run SoX with the noiseprof effect on a section of audio that
ideally would contain silence but in fact contains noise - such sections are
typically found at the beginning or the end of a recording. noiseprof will write
out a noise profile to profile-file, or to stdout if no profile-file or if `-' is
given. E.g.
sox speech.wav -n trim 0 1.5 noiseprof speech.noise-profile
To actually remove the noise, run SoX again, this time with the noisered effect;
noisered will reduce noise according to a noise profile (which was generated by
noiseprof), from profile-file, or from stdin if no profile-file or if `-' is given.
E.g.
sox speech.wav cleaned.wav noisered speech.noise-profile 0.3
How much noise should be removed is specified by amount-a number between 0 and 1
with a default of 0.5. Higher numbers will remove more noise but present a greater
likelihood of removing wanted components of the audio signal. Before replacing an
original recording with a noise-reduced version, experiment with different amount
values to find the optimal one for your audio; use headphones to check that you are
happy with the results, paying particular attention to quieter sections of the
audio.
On most systems, the two stages - profiling and reduction - can be combined using a
pipe, e.g.
sox noisy.wav -n trim 0 1 noiseprof | play noisy.wav noisered
norm [dB-level]
Normalise the audio. norm is just an alias for gain -n; see the gain effect for
details.
oops Out Of Phase Stereo effect. Mixes stereo to twin-mono where each mono channel
contains the difference between the left and right stereo channels. This is
sometimes known as the `karaoke' effect as it often has the effect of removing most
or all of the vocals from a recording. It is equivalent to remix 1,2i 1,2i.
overdrive [gain(20) [colour(20)]]
Non linear distortion. The colour parameter controls the amount of even harmonic
content in the over-driven output.
pad { length[@position(=)] }
Pad the audio with silence, at the beginning, the end, or any specified points
through the audio. length is the amount of silence to insert and position the
position in the input audio stream at which to insert it. Any number of lengths
and positions may be specified, provided that a specified position is not less that
the previous one, and any time specification may be used for them. position is
optional for the first and last lengths specified and if omitted correspond to the
beginning and the end of the audio respectively. For example, pad 1.5 1.5 adds 1.5
seconds of silence padding at each end of the audio, whilst pad 4000s@3:00 inserts
4000 samples of silence 3 minutes into the audio. If silence is wanted only at the
end of the audio, specify either the end position or specify a zero-length pad at
the start.
See also delay for an effect that can add silence at the beginning of the audio on
a channel-by-channel basis.
phaser gain-in gain-out delay decay speed [-s|-t]
Add a phasing effect to the audio. See [3] for a detailed description of phasing.
delay/decay/speed gives the delay in milliseconds and the decay (relative to gain-
in) with a modulation speed in Hz. The modulation is either sinusoidal (-s) -
preferable for multiple instruments, or triangular (-t) - gives single instruments
a sharper phasing effect. The decay should be less than 0.5 to avoid feedback, and
usually no less than 0.1. Gain-out is the volume of the output.
For example:
play snare.flac phaser 0.8 0.74 3 0.4 0.5 -t
Gentler:
play snare.flac phaser 0.9 0.85 4 0.23 1.3 -s
A popular sound:
play snare.flac phaser 0.89 0.85 1 0.24 2 -t
More severe:
play snare.flac phaser 0.6 0.66 3 0.6 2 -t
pitch [-q] shift [segment [search [overlap]]]
Change the audio pitch (but not tempo).
shift gives the pitch shift as positive or negative `cents' (i.e. 100ths of a
semitone). See the tempo effect for a description of the other parameters.
See also the bend, speed, and tempo effects.
rate [-q|-l|-m|-h|-v] [override-options] RATE[k]
Change the audio sampling rate (i.e. resample the audio) to any given RATE (even
non-integer if this is supported by the output file format) using a quality level
defined as follows:
Quality Band- Rej dB Typical Use
width
-q quick n/a ≈30 @ playback on
Fs/4 ancient hardware
-l low 80% 100 playback on old
hardware
-m medium 95% 100 audio playback
-h high 95% 125 16-bit mastering
(use with dither)
-v very high 95% 175 24-bit mastering
where Band-width is the percentage of the audio frequency band that is preserved
and Rej dB is the level of noise rejection. Increasing levels of resampling
quality come at the expense of increasing amounts of time to process the audio. If
no quality option is given, the quality level used is `high' (but see `Playing &
Recording Audio' above regarding playback).
The `quick' algorithm uses cubic interpolation; all others use band-limited
interpolation. By default, all algorithms have a `linear' phase response; for
`medium', `high' and `very high', the phase response is configurable (see below).
The rate effect is invoked automatically if SoX's -r option specifies a rate that
is different to that of the input file(s). Alternatively, if this effect is given
explicitly, then SoX's -r option need not be given. For example, the following two
commands are equivalent:
sox input.wav -r 48k output.wav bass -b 24
sox input.wav output.wav bass -b 24 rate 48k
though the second command is more flexible as it allows rate options to be given,
and allows the effects to be ordered arbitrarily.
* * *
Warning: technically detailed discussion follows.
The simple quality selection described above provides settings that satisfy the
needs of the vast majority of resampling tasks. Occasionally, however, it may be
desirable to fine-tune the resampler's filter response; this can be achieved using
override options, as detailed in the following table:
-M/-I/-L Phase response = minimum/intermediate/linear
-s Steep filter (band-width = 99%)
-a Allow aliasing/imaging above the pass-band
-b 74-99.7 Any band-width %
-p 0-100 Any phase response (0 = minimum, 25 = intermediate,
50 = linear, 100 = maximum)
N.B. Override options cannot be used with the `quick' or `low' quality algorithms.
All resamplers use filters that can sometimes create `echo' (a.k.a. `ringing')
artefacts with transient signals such as those that occur with `finger snaps' or
other highly percussive sounds. Such artefacts are much more noticeable to the
human ear if they occur before the transient (`pre-echo') than if they occur after
it (`post-echo'). Note that frequency of any such artefacts is related to the
smaller of the original and new sampling rates but that if this is at least
44.1kHz, then the artefacts will lie outside the range of human hearing.
A phase response setting may be used to control the distribution of any transient
echo between `pre' and `post': with minimum phase, there is no pre-echo but the
longest post-echo; with linear phase, pre and post echo are in equal amounts (in
signal terms, but not audibility terms); the intermediate phase setting attempts to
find the best compromise by selecting a small length (and level) of pre-echo and a
medium lengthed post-echo.
Minimum, intermediate, or linear phase response is selected using the -M, -I, or -L
option; a custom phase response can be created with the -p option. Note that phase
responses between `linear' and `maximum' (greater than 50) are rarely useful.
A resampler's band-width setting determines how much of the frequency content of
the original signal (w.r.t. the original sample rate when up-sampling, or the new
sample rate when down-sampling) is preserved during conversion. The term `pass-
band' is used to refer to all frequencies up to the band-width point (e.g. for
44.1kHz sampling rate, and a resampling band-width of 95%, the pass-band represents
frequencies from 0Hz (D.C.) to circa 21kHz). Increasing the resampler's band-width
results in a slower conversion and can increase transient echo artefacts (and vice
versa).
The -s `steep filter' option changes resampling band-width from the default 95%
(based on the 3dB point), to 99%. The -b option allows the band-width to be set to
any value in the range 74-99.7 %, but note that band-width values greater than 99%
are not recommended for normal use as they can cause excessive transient echo.
If the -a option is given, then aliasing/imaging above the pass-band is allowed.
For example, with 44.1kHz sampling rate, and a resampling band-width of 95%, this
means that frequency content above 21kHz can be distorted; however, since this is
above the pass-band (i.e. above the highest frequency of interest/audibility),
this may not be a problem. The benefits of allowing aliasing/imaging are reduced
processing time, and reduced (by almost half) transient echo artefacts. Note that
if this option is given, then the minimum band-width allowable with -b increases to
85%.
Examples:
sox input.wav -b 16 output.wav rate -s -a 44100 dither -s
default (high) quality resampling; overrides: steep filter, allow aliasing; to
44.1kHz sample rate; noise-shaped dither to 16-bit WAV file.
sox input.wav -b 24 output.aiff rate -v -I -b 90 48k
very high quality resampling; overrides: intermediate phase, band-width 90%; to 48k
sample rate; store output to 24-bit AIFF file.
* * *
The pitch and speed effects use the rate effect at their core.
remix [-a|-m|-p] <out-spec>
out-spec = in-spec{,in-spec} | 0
in-spec = [in-chan][-[in-chan2]][vol-spec]
vol-spec = p|i|v[volume]
Select and mix input audio channels into output audio channels. Each output
channel is specified, in turn, by a given out-spec: a list of contributing input
channels and volume specifications.
Note that this effect operates on the audio channels within the SoX effects
processing chain; it should not be confused with the -m global option (where
multiple files are mix-combined before entering the effects chain).
An out-spec contains comma-separated input channel-numbers and hyphen-delimited
channel-number ranges; alternatively, 0 may be given to create a silent output
channel. For example,
sox input.wav output.wav remix 6 7 8 0
creates an output file with four channels, where channels 1, 2, and 3 are copies of
channels 6, 7, and 8 in the input file, and channel 4 is silent. Whereas
sox input.wav output.wav remix 1-3,7 3
creates a (somewhat bizarre) stereo output file where the left channel is a mix-
down of input channels 1, 2, 3, and 7, and the right channel is a copy of input
channel 3.
Where a range of channels is specified, the channel numbers to the left and right
of the hyphen are optional and default to 1 and to the number of input channels
respectively. Thus
sox input.wav output.wav remix -
performs a mix-down of all input channels to mono.
By default, where an output channel is mixed from multiple (n) input channels, each
input channel will be scaled by a factor of ¹/n. Custom mixing volumes can be set
by following a given input channel or range of input channels with a vol-spec
(volume specification). This is one of the letters p, i, or v, followed by a
volume number, the meaning of which depends on the given letter and is defined as
follows:
Letter Volume number Notes
p power adjust in dB 0 = no change
i power adjust in dB As `p', but invert the
audio
v voltage multiplier 1 = no change, 0.5 ≈ 6dB
attenuation, 2 ≈ 6dB
gain, -1 = invert
If an out-spec includes at least one vol-spec then, by default, ¹/n scaling is not
applied to any other channels in the same out-spec (though may be in other out-
specs). The -a (automatic) option however, can be given to retain the automatic
scaling in this case. For example,
sox input.wav output.wav remix 1,2 3,4v0.8
results in channel level multipliers of 0.5,0.5 1,0.8, whereas
sox input.wav output.wav remix -a 1,2 3,4v0.8
results in channel level multipliers of 0.5,0.5 0.5,0.8.
The -m (manual) option disables all automatic volume adjustments, so
sox input.wav output.wav remix -m 1,2 3,4v0.8
results in channel level multipliers of 1,1 1,0.8.
The volume number is optional and omitting it corresponds to no volume change;
however, the only case in which this is useful is in conjunction with i. For
example, if input.wav is stereo, then
sox input.wav output.wav remix 1,2i
is a mono equivalent of the oops effect.
If the -p option is given, then any automatic ¹/n scaling is replaced by ¹/√n
(`power') scaling; this gives a louder mix but one that might occasionally clip.
* * *
One use of the remix effect is to split an audio file into a set of files, each
containing one of the constituent channels (in order to perform subsequent
processing on individual audio channels). Where more than a few channels are
involved, a script such as the following (Bourne shell script) is useful:
#!/bin/sh
chans=`soxi -c "$1"`
while [ $chans -ge 1 ]; do
chans0=`printf %02i $chans` # 2 digits hence up to 99 chans
out=`echo "$1"|sed "s/\(.*\)\.\(.*\)/\1-$chans0.\2/"`
sox "$1" "$out" remix $chans
chans=`expr $chans - 1`
done
If a file input.wav containing six audio channels were given, the script would
produce six output files: input-01.wav, input-02.wav, ..., input-06.wav.
See also the swap effect.
repeat [count(1)|-]
Repeat the entire audio count times, or once if count is not given. The special
value - requests infinite repetition. Requires temporary file space to store the
audio to be repeated. Note that repeating once yields two copies: the original
audio and the repeated audio.
reverb [-w|--wet-only] [reverberance (50%) [HF-damping (50%)
[room-scale (100%) [stereo-depth (100%)
[pre-delay (0ms) [wet-gain (0dB)]]]]]]
Add reverberation to the audio using the `freeverb' algorithm. A reverberation
effect is sometimes desirable for concert halls that are too small or contain so
many people that the hall's natural reverberance is diminished. Applying a small
amount of stereo reverb to a (dry) mono signal will usually make it sound more
natural. See [3] for a detailed description of reverberation.
Note that this effect increases both the volume and the length of the audio, so to
prevent clipping in these domains, a typical invocation might be:
play dry.wav gain -3 pad 0 3 reverb
The -w option can be given to select only the `wet' signal, thus allowing it to be
processed further, independently of the `dry' signal. E.g.
play -m voice.wav "|sox voice.wav -p reverse reverb -w reverse"
for a reverse reverb effect.
reverse
Reverse the audio completely. Requires temporary file space to store the audio to
be reversed.
riaa Apply RIAA vinyl playback equalisation. The sampling rate must be one of: 44.1,
48, 88.2, 96 kHz.
This effect supports the --plot global option.
silence [-l] above-periods [duration threshold[d|%]
[below-periods duration threshold[d|%]]
Removes silence from the beginning, middle, or end of the audio. `Silence' is
determined by a specified threshold.
The above-periods value is used to indicate if audio should be trimmed at the
beginning of the audio. A value of zero indicates no silence should be trimmed from
the beginning. When specifying a non-zero above-periods, it trims audio up until it
finds non-silence. Normally, when trimming silence from beginning of audio the
above-periods will be 1 but it can be increased to higher values to trim all audio
up to a specific count of non-silence periods. For example, if you had an audio
file with two songs that each contained 2 seconds of silence before the song, you
could specify an above-period of 2 to strip out both silence periods and the first
song.
When above-periods is non-zero, you must also specify a duration and threshold.
duration indicates the amount of time that non-silence must be detected before it
stops trimming audio. By increasing the duration, burst of noise can be treated as
silence and trimmed off.
threshold is used to indicate what sample value you should treat as silence. For
digital audio, a value of 0 may be fine but for audio recorded from analog, you may
wish to increase the value to account for background noise.
When optionally trimming silence from the end of the audio, you specify a below-
periods count. In this case, below-period means to remove all audio after silence
is detected. Normally, this will be a value 1 of but it can be increased to skip
over periods of silence that are wanted. For example, if you have a song with 2
seconds of silence in the middle and 2 second at the end, you could set below-
period to a value of 2 to skip over the silence in the middle of the audio.
For below-periods, duration specifies a period of silence that must exist before
audio is not copied any more. By specifying a higher duration, silence that is
wanted can be left in the audio. For example, if you have a song with an expected
1 second of silence in the middle and 2 seconds of silence at the end, a duration
of 2 seconds could be used to skip over the middle silence.
Unfortunately, you must know the length of the silence at the end of your audio
file to trim off silence reliably. A workaround is to use the silence effect in
combination with the reverse effect. By first reversing the audio, you can use the
above-periods to reliably trim all audio from what looks like the front of the
file. Then reverse the file again to get back to normal.
To remove silence from the middle of a file, specify a below-periods that is
negative. This value is then treated as a positive value and is also used to
indicate that the effect should restart processing as specified by the above-
periods, making it suitable for removing periods of silence in the middle of the
audio.
The option -l indicates that below-periods duration length of audio should be left
intact at the beginning of each period of silence. For example, if you want to
remove long pauses between words but do not want to remove the pauses completely.
duration is a time specification with the peculiarity that a bare number is
interpreted as a sample count, not as a number of seconds. For specifying seconds,
either use the t suffix (as in `2t') or specify minutes, too (as in `0:02').
threshold numbers may be suffixed with d to indicate the value is in decibels, or %
to indicate a percentage of maximum value of the sample value (0% specifies pure
digital silence).
The following example shows how this effect can be used to start a recording that
does not contain the delay at the start which usually occurs between `pressing the
record button' and the start of the performance:
rec parameters filename other-effects silence 1 5 2%
sinc [-a att|-b beta] [-p phase|-M|-I|-L] [-t tbw|-n taps] [freqHP][-freqLP [-t tbw|-n
taps]]
Apply a sinc kaiser-windowed low-pass, high-pass, band-pass, or band-reject filter
to the signal. The freqHP and freqLP parameters give the frequencies of the 6dB
points of a high-pass and low-pass filter that may be invoked individually, or
together. If both are given, then freqHP less than freqLP creates a band-pass
filter, freqHP greater than freqLP creates a band-reject filter. For example, the
invocations
sinc 3k
sinc -4k
sinc 3k-4k
sinc 4k-3k
create a high-pass, low-pass, band-pass, and band-reject filter respectively.
The default stop-band attenuation of 120dB can be overridden with -a;
alternatively, the kaiser-window `beta' parameter can be given directly with -b.
The default transition band-width of 5% of the total band can be overridden with -t
(and tbw in Hertz); alternatively, the number of filter taps can be given directly
with -n.
If both freqHP and freqLP are given, then a -t or -n option given to the left of
the frequencies applies to both frequencies; one of these options given to the
right of the frequencies applies only to freqLP.
The -p, -M, -I, and -L options control the filter's phase response; see the rate
effect for details.
This effect supports the --plot global option.
spectrogram [options]
Create a spectrogram of the audio; the audio is passed unmodified through the SoX
processing chain. This effect is optional - type sox --help and check the list of
supported effects to see if it has been included.
The spectrogram is rendered in a Portable Network Graphic (PNG) file, and shows
time in the X-axis, frequency in the Y-axis, and audio signal magnitude in the Z-
axis. Z-axis values are represented by the colour (or optionally the intensity) of
the pixels in the X-Y plane. If the audio signal contains multiple channels then
these are shown from top to bottom starting from channel 1 (which is the left
channel for stereo audio).
For example, if `my.wav' is a stereo file, then with
sox my.wav -n spectrogram
a spectrogram of the entire file will be created in the file `spectrogram.png'.
More often though, analysis of a smaller portion of the audio is required; e.g.
with
sox my.wav -n remix 2 trim 20 30 spectrogram
the spectrogram shows information only from the second (right) channel, and of
thirty seconds of audio starting from twenty seconds in. To analyse a small
portion of the frequency domain, the rate effect may be used, e.g.
sox my.wav -n rate 6k spectrogram
allows detailed analysis of frequencies up to 3kHz (half the sampling rate) i.e.
where the human auditory system is most sensitive. With
sox my.wav -n trim 0 10 spectrogram -x 600 -y 200 -z 100
the given options control the size of the spectrogram's X, Y & Z axes (in this
case, the spectrogram area of the produced image will be 600 by 200 pixels in size
and the Z-axis range will be 100 dB). Note that the produced image includes axes
legends etc. and so will be a little larger than the specified spectrogram size.
In this example:
sox -n -n synth 6 tri 10k:14k spectrogram -z 100 -w kaiser
an analysis `window' with high dynamic range is selected to best display the
spectrogram of a swept triangular wave. For a smilar example, append the following
to the `chime' command in the description of the delay effect (above):
rate 2k spectrogram -X 200 -Z -10 -w kaiser
Options are also available to control the appearance (colour-set, brightness,
contrast, etc.) and filename of the spectrogram; e.g. with
sox my.wav -n spectrogram -m -l -o print.png
a spectrogram is created suitable for printing on a `black and white' printer.
Options:
-x num Change the (maximum) width (X-axis) of the spectrogram from its default
value of 800 pixels to a given number between 100 and 200000. See also -X
and -d.
-X num X-axis pixels/second; the default is auto-calculated to fit the given or
known audio duration to the X-axis size, or 100 otherwise. If given in
conjunction with -d, this option affects the width of the spectrogram;
otherwise, it affects the duration of the spectrogram. num can be from 1
(low time resolution) to 5000 (high time resolution) and need not be an
integer. SoX may make a slight adjustment to the given number for
processing quantisation reasons; if so, SoX will report the actual number
used (viewable when the SoX global option -V is in effect). See also -x and
-d.
-y num Sets the Y-axis size in pixels (per channel); this is the number of
frequency `bins' used in the Fourier analysis that produces the spectrogram.
N.B. it can be slow to produce the spectrogram if this number is not one
more than a power of two (e.g. 129). By default the Y-axis size is chosen
automatically (depending on the number of channels). See -Y for alternative
way of setting spectrogram height.
-Y num Sets the target total height of the spectrogram(s). The default value is
550 pixels. Using this option (and by default), SoX will choose a height
for individual spectrogram channels that is one more than a power of two, so
the actual total height may fall short of the given number. However, there
is also a minimum height per channel so if there are many channels, the
number may be exceeded. See -y for alternative way of setting spectrogram
height.
-z num Z-axis (colour) range in dB, default 120. This sets the dynamic-range of
the spectrogram to be -num dBFS to 0 dBFS. Num may range from 20 to 180.
Decreasing dynamic-range effectively increases the `contrast' of the
spectrogram display, and vice versa.
-Z num Sets the upper limit of the Z-axis in dBFS. A negative num effectively
increases the `brightness' of the spectrogram display, and vice versa.
-q num Sets the Z-axis quantisation, i.e. the number of different colours (or
intensities) in which to render Z-axis values. A small number (e.g. 4) will
give a `poster'-like effect making it easier to discern magnitude bands of
similar level. Small numbers also usually result in small PNG files. The
number given specifies the number of colours to use inside the Z-axis range;
two colours are reserved to represent out-of-range values.
-w name
Window: Hann (default), Hamming, Bartlett, Rectangular, Kaiser or Dolph.
The spectrogram is produced using the Discrete Fourier Transform (DFT)
algorithm. A significant parameter to this algorithm is the choice of
`window function'. By default, SoX uses the Hann window which has good all-
round frequency-resolution and dynamic-range properties. For better
frequency resolution (but lower dynamic-range), select a Hamming window; for
higher dynamic-range (but poorer frequency-resolution), select a Dolph
window. Kaiser, Bartlett and Rectangular windows are also available.
-W num Window adjustment parameter. This can be used to make small adjustments to
the Kaiser or Dolph window shape. A positive number (up to ten) increases
its dynamic range, a negative number decreases it.
-s Allow slack overlapping of DFT windows. This can, in some cases, increase
image sharpness and give greater adherence to the -x value, but at the
expense of a little spectral loss.
-m Creates a monochrome spectrogram (the default is colour).
-h Selects a high-colour palette - less visually pleasing than the default
colour palette, but it may make it easier to differentiate different levels.
If this option is used in conjunction with -m, the result will be a hybrid
monochrome/colour palette.
-p num Permute the colours in a colour or hybrid palette. The num parameter, from
1 (the default) to 6, selects the permutation.
-l Creates a `printer friendly' spectrogram with a light background (the
default has a dark background).
-a Suppress the display of the axis lines. This is sometimes useful in helping
to discern artefacts at the spectrogram edges.
-r Raw spectrogram: suppress the display of axes and legends.
-A Selects an alternative, fixed colour-set. This is provided only for
compatibility with spectrograms produced by another package. It should not
normally be used as it has some problems, not least, a lack of
differentiation at the bottom end which results in masking of low-level
artefacts.
-t text
Set the image title - text to display above the spectrogram.
-c text
Set (or clear) the image comment - text to display below and to the left of
the spectrogram.
-o file
Name of the spectrogram output PNG file, default `spectrogram.png'. If `-'
is given, the spectrogram will be sent to standard output (stdout).
Advanced Options:
In order to process a smaller section of audio without affecting other effects or
the output signal (unlike when the trim effect is used), the following options may
be used.
-d duration
This option sets the X-axis resolution such that audio with the given
duration (a time specification) fits the selected (or default) X-axis width.
For example,
sox input.mp3 output.wav -n spectrogram -d 1:00 stats
creates a spectrogram showing the first minute of the audio, whilst
the stats effect is applied to the entire audio signal.
See also -X for an alternative way of setting the X-axis resolution.
-S position(=)
Start the spectrogram at the given point in the audio stream. For example
sox input.aiff output.wav spectrogram -S 1:00
creates a spectrogram showing all but the first minute of the audio (the
output file, however, receives the entire audio stream).
For the ability to perform off-line processing of spectral data, see the stat
effect.
speed factor[c]
Adjust the audio speed (pitch and tempo together). factor is either the ratio of
the new speed to the old speed: greater than 1 speeds up, less than 1 slows down,
or, if appended with the letter `c', the number of cents (i.e. 100ths of a
semitone) by which the pitch (and tempo) should be adjusted: greater than 0
increases, less than 0 decreases.
Technically, the speed effect only changes the sample rate information, leaving the
samples themselves untouched. The rate effect is invoked automatically to resample
to the output sample rate, using its default quality/speed. For higher quality or
higher speed resampling, in addition to the speed effect, specify the rate effect
with the desired quality option.
See also the bend, pitch, and tempo effects.
splice [-h|-t|-q] { position(=)[,excess[,leeway]] }
Splice together audio sections. This effect provides two things over simple audio
concatenation: a (usually short) cross-fade is applied at the join, and a wave
similarity comparison is made to help determine the best place at which to make the
join.
One of the options -h, -t, or -q may be given to select the fade envelope as half-
cosine wave (the default), triangular (a.k.a. linear), or quarter-cosine wave
respectively.
Type Audio Fade level Transitions
t correlated constant gain abrupt
h correlated constant gain smooth
q uncorrelated constant power smooth
To perform a splice, first use the trim effect to select the audio sections to be
joined together. As when performing a tape splice, the end of the section to be
spliced onto should be trimmed with a small excess (default 0.005 seconds) of audio
after the ideal joining point. The beginning of the audio section to splice on
should be trimmed with the same excess (before the ideal joining point), plus an
additional leeway (default 0.005 seconds). Any time specification may be used for
these parameters. SoX should then be invoked with the two audio sections as input
files and the splice effect given with the position at which to perform the splice
- this is length of the first audio section (including the excess).
The following diagram uses the tape analogy to illustrate the splice operation.
The effect simulates the diagonal cuts and joins the two pieces:
length1 excess
-----------><--->
_________ : : _________________
\ : : :\ `
\ : : : \ `
\: : : \ `
* : : * - - *
\ : : :\ `
\ : : : \ `
_______________\: : : \_____`____
: : : :
<---> <----->
excess leeway
where * indicates the joining points.
For example, a long song begins with two verses which start (as determined e.g. by
using the play command with the trim (start) effect) at times 0:30.125 and
1:03.432. The following commands cut out the first verse:
sox too-long.wav part1.wav trim 0 30.130
(5 ms excess, after the first verse starts)
sox too-long.wav part2.wav trim 1:03.422
(5 ms excess plus 5 ms leeway, before the second verse starts)
sox part1.wav part2.wav just-right.wav splice 30.130
For another example, the SoX command
play "|sox -n -p synth 1 sin %1" "|sox -n -p synth 1 sin %3"
generates and plays two notes, but there is a nasty click at the transition; the
click can be removed by splicing instead of concatenating the audio, i.e. by
appending splice 1 to the command. (Clicks at the beginning and end of the audio
can be removed by preceding the splice effect with fade q .01 2 .01).
Provided your arithmetic is good enough, multiple splices can be performed with a
single splice invocation. For example:
#!/bin/sh
# Audio Copy and Paste Over
# acpo infile copy-start copy-stop paste-over-start outfile
# No chained time specifications allowed for the parameters
# (i.e. such that contain +/-).
e=0.005 # Using default excess
l=$e # and leeway.
sox "$1" piece.wav trim $2-$e-$l =$3+$e
sox "$1" part1.wav trim 0 $4+$e
sox "$1" part2.wav trim $4+$3-$2-$e-$l
sox part1.wav piece.wav part2.wav "$5" \
splice $4+$e +$3-$2+$e+$l+$e
In the above Bourne shell script, two splices are used to `copy and paste' audio.
* * *
It is also possible to use this effect to perform general cross-fades, e.g. to join
two songs. In this case, excess would typically be an number of seconds, the -q
option would typically be given (to select an `equal power' cross-fade), and leeway
should be zero (which is the default if -q is given). For example, if f1.wav and
f2.wav are audio files to be cross-faded, then
sox f1.wav f2.wav out.wav splice -q $(soxi -D f1.wav),3
cross-fades the files where the point of equal loudness is 3 seconds before the end
of f1.wav, i.e. the total length of the cross-fade is 2 × 3 = 6 seconds (Note: the
$(...) notation is POSIX shell).
stat [-s scale] [-rms] [-freq] [-v] [-d]
Display time and frequency domain statistical information about the audio. Audio
is passed unmodified through the SoX processing chain.
The information is output to the `standard error' (stderr) stream and is
calculated, where n is the duration of the audio in samples, c is the number of
audio channels, r is the audio sample rate, and xk represents the PCM value (in the
range -1 to +1 by default) of each successive sample in the audio, as follows:
Samples read n×c
Length (seconds) n÷r
Scaled by See -s below.
Maximum amplitude max(xk) The maximum sample value
in the audio; usually
this will be a positive
number.
Minimum amplitude min(xk) The minimum sample value
in the audio; usually
this will be a negative
number.
Midline amplitude ½min(xk)+½max(xk)
Mean norm ¹/nΣ│xk│ The average of the
absolute value of each
sample in the audio.
Mean amplitude ¹/nΣxk The average of each
sample in the audio. If
this figure is non-zero,
then it indicates the
presence of a D.C.
offset (which could be
removed using the
dcshift effect).
RMS amplitude √(¹/nΣxk²) The level of a D.C.
signal that would have
the same power as the
audio's average power.
Maximum delta max(│xk-xk-1│)
Minimum delta min(│xk-xk-1│)
Mean delta ¹/n-1Σ│xk-xk-1│
RMS delta √(¹/n-1Σ(xk-xk-1)²)
Rough frequency In Hz.
Volume Adjustment The parameter to the vol
effect which would make
the audio as loud as
possible without
clipping. Note: See the
discussion on Clipping
above for reasons why it
is rarely a good idea
actually to do this.
Note that the delta measurements are not applicable for multi-channel audio.
The -s option can be used to scale the input data by a given factor. The default
value of scale is 2147483647 (i.e. the maximum value of a 32-bit signed integer).
Internal effects always work with signed long PCM data and so the value should
relate to this fact.
The -rms option will convert all output average values to `root mean square'
format.
The -v option displays only the `Volume Adjustment' value.
The -freq option calculates the input's power spectrum (4096 point DFT) instead of
the statistics listed above. This should only be used with a single channel audio
file.
The -d option displays a hex dump of the 32-bit signed PCM data audio in SoX's
internal buffer. This is mainly used to help track down endian problems that
sometimes occur in cross-platform versions of SoX.
See also the stats effect.
stats [-b bits|-x bits|-s scale] [-w window-time]
Display time domain statistical information about the audio channels; audio is
passed unmodified through the SoX processing chain. Statistics are calculated and
displayed for each audio channel and, where applicable, an overall figure is also
given.
For example, for a typical well-mastered stereo music file:
Overall Left Right
DC offset 0.000803 -0.000391 0.000803
Min level -0.750977 -0.750977 -0.653412
Max level 0.708801 0.708801 0.653534
Pk lev dB -2.49 -2.49 -3.69
RMS lev dB -19.41 -19.13 -19.71
RMS Pk dB -13.82 -13.82 -14.38
RMS Tr dB -85.25 -85.25 -82.66
Crest factor - 6.79 6.32
Flat factor 0.00 0.00 0.00
Pk count 2 2 2
Bit-depth 16/16 16/16 16/16
Num samples 7.72M
Length s 174.973
Scale max 1.000000
Window s 0.050
DC offset, Min level, and Max level are shown, by default, in the range ±1. If the
-b (bits) options is given, then these three measurements will be scaled to a
signed integer with the given number of bits; for example, for 16 bits, the scale
would be -32768 to +32767. The -x option behaves the same way as -b except that
the signed integer values are displayed in hexadecimal. The -s option scales the
three measurements by a given floating-point number.
Pk lev dB and RMS lev dB are standard peak and RMS level measured in dBFS.
RMS Pk dB and RMS Tr dB are peak and trough values for RMS level measured over a
short window (default 50ms).
Crest factor is the standard ratio of peak to RMS level (note: not in dB).
Flat factor is a measure of the flatness (i.e. consecutive samples with the same
value) of the signal at its peak levels (i.e. either Min level, or Max level).
Pk count is the number of occasions (not the number of samples) that the signal
attained either Min level, or Max level.
The right-hand Bit-depth figure is the standard definition of bit-depth i.e. bits
less significant than the given number are fixed at zero. The left-hand figure is
the number of most significant bits that are fixed at zero (or one for negative
numbers) subtracted from the right-hand figure (the number subtracted is directly
related to Pk lev dB).
For multi-channel audio, an overall figure for each of the above measurements is
given and derived from the channel figures as follows: DC offset: maximum
magnitude; Max level, Pk lev dB, RMS Pk dB, Bit-depth: maximum; Min level,
RMS Tr dB: minimum; RMS lev dB, Flat factor, Pk count: average; Crest factor: not
applicable.
Length s is the duration in seconds of the audio, and Num samples is equal to the
sample-rate multiplied by Length. Scale Max is the scaling applied to the first
three measurements; specifically, it is the maximum value that could apply to
Max level. Window s is the length of the window used for the peak and trough RMS
measurements.
See also the stat effect.
swap Swap stereo channels. If the input is not stereo, pairs of channels are swapped,
and a possible odd last channel passed through. E.g., for seven channels, the
output order will be 2, 1, 4, 3, 6, 5, 7.
See also remix for an effect that allows arbitrary channel selection and ordering
(and mixing).
stretch factor [window fade shift fading]
Change the audio duration (but not its pitch). This effect is broadly equivalent
to the tempo effect with (factor inverted and) search set to zero, so in general,
its results are comparatively poor; it is retained as it can sometimes out-perform
tempo for small factors.
factor of stretching: >1 lengthen, <1 shorten duration. window size is in ms.
Default is 20ms. The fade option, can be `lin'. shift ratio, in [0 1]. Default
depends on stretch factor. 1 to shorten, 0.8 to lengthen. The fading ratio, in [0
0.5]. The amount of a fade's default depends on factor and shift.
See also the tempo effect.
synth [-j KEY] [-n] [len [off [ph [p1 [p2 [p3]]]]]] {[type] [combine]
[[%]freq[k][:|+|/|-[%]freq2[k]]] [off [ph [p1 [p2 [p3]]]]]}
This effect can be used to generate fixed or swept frequency audio tones with
various wave shapes, or to generate wide-band noise of various `colours'. Multiple
synth effects can be cascaded to produce more complex waveforms; at each stage it
is possible to choose whether the generated waveform will be mixed with, or
modulated onto the output from the previous stage. Audio for each channel in a
multi-channel audio file can be synthesised independently.
Though this effect is used to generate audio, an input file must still be given,
the characteristics of which will be used to set the synthesised audio length, the
number of channels, and the sampling rate; however, since the input file's audio is
not normally needed, a `null file' (with the special name -n) is often given
instead (and the length specified as a parameter to synth or by another given
effect that has an associated length).
For example, the following produces a 3 second, 48kHz, audio file containing a
sine-wave swept from 300 to 3300 Hz:
sox -n output.wav synth 3 sine 300-3300
and this produces an 8 kHz version:
sox -r 8000 -n output.wav synth 3 sine 300-3300
Multiple channels can be synthesised by specifying the set of parameters shown
between braces multiple times; the following puts the swept tone in the left
channel and adds `brown' noise in the right:
sox -n output.wav synth 3 sine 300-3300 brownnoise
The following example shows how two synth effects can be cascaded to create a more
complex waveform:
play -n synth 0.5 sine 200-500 synth 0.5 sine fmod 700-100
Frequencies can also be given in `scientific' note notation, or, by prefixing a `%'
character, as a number of semitones relative to `middle A' (440 Hz). For example,
the following could be used to help tune a guitar's low `E' string:
play -n synth 4 pluck %-29
or with a (Bourne shell) loop, the whole guitar:
for n in E2 A2 D3 G3 B3 E4; do
play -n synth 4 pluck $n repeat 2; done
See the delay effect (above) and the reference to `SoX scripting examples' (below)
for more synth examples.
N.B. This effect generates audio at maximum volume (0dBFS), which means that there
is a high chance of clipping when using the audio subsequently, so in many cases,
you will want to follow this effect with the gain effect to prevent this from
happening. (See also Clipping above.) Note that, by default, the synth effect
incorporates the functionality of gain -h (see the gain effect for details);
synth's -n option may be given to disable this behaviour.
A detailed description of each synth parameter follows:
len is the length of audio to synthesise (any time specification); a value of 0
indicated to use the input length, which is also the default.
type is one of sine, square, triangle, sawtooth, trapezium, exp, [white]noise,
tpdfnoise, pinknoise, brownnoise, pluck; default=sine.
combine is one of create, mix, amod (amplitude modulation), fmod (frequency
modulation); default=create.
freq/freq2 are the frequencies at the beginning/end of synthesis in Hz or, if
preceded with `%', semitones relative to A (440 Hz); alternatively, `scientific'
note notation (e.g. E2) may be used. The default frequency is 440Hz. By default,
the tuning used with the note notations is `equal temperament'; the -j KEY option
selects `just intonation', where KEY is an integer number of semitones relative to
A (so for example, -9 or 3 selects the key of C), or a note in scientific notation.
If freq2 is given, then len must also have been given and the generated tone will
be swept between the given frequencies. The two given frequencies must be
separated by one of the characters `:', `+', `/', or `-'. This character is used
to specify the sweep function as follows:
: Linear: the tone will change by a fixed number of hertz per second.
+ Square: a second-order function is used to change the tone.
/ Exponential: the tone will change by a fixed number of semitones per second.
- Exponential: as `/', but initial phase always zero, and stepped (less
smooth) frequency changes.
Not used for noise.
off is the bias (DC-offset) of the signal in percent; default=0.
ph is the phase shift in percentage of 1 cycle; default=0. Not used for noise.
p1 is the percentage of each cycle that is `on' (square), or `rising' (triangle,
exp, trapezium); default=50 (square, triangle, exp), default=10 (trapezium), or
sustain (pluck); default=40.
p2 (trapezium): the percentage through each cycle at which `falling' begins;
default=50. exp: the amplitude in multiples of 2dB; default=50, or tone-1 (pluck);
default=20.
p3 (trapezium): the percentage through each cycle at which `falling' ends;
default=60, or tone-2 (pluck); default=90.
tempo [-q] [-m|-s|-l] factor [segment [search [overlap]]]
Change the audio playback speed but not its pitch. This effect uses the WSOLA
algorithm. The audio is chopped up into segments which are then shifted in the time
domain and overlapped (cross-faded) at points where their waveforms are most
similar as determined by measurement of `least squares'.
By default, linear searches are used to find the best overlapping points. If the
optional -q parameter is given, tree searches are used instead. This makes the
effect work more quickly, but the result may not sound as good. However, if you
must improve the processing speed, this generally reduces the sound quality less
than reducing the search or overlap values.
The -m option is used to optimize default values of segment, search and overlap for
music processing.
The -s option is used to optimize default values of segment, search and overlap for
speech processing.
The -l option is used to optimize default values of segment, search and overlap for
`linear' processing that tends to cause more noticeable distortion but may be
useful when factor is close to 1.
If -m, -s, or -l is specified, the default value of segment will be calculated
based on factor, while default search and overlap values are based on segment. Any
values you provide still override these default values.
factor gives the ratio of new tempo to the old tempo, so e.g. 1.1 speeds up the
tempo by 10%, and 0.9 slows it down by 10%.
The optional segment parameter selects the algorithm's segment size in
milliseconds. If no other flags are specified, the default value is 82 and is
typically suited to making small changes to the tempo of music. For larger changes
(e.g. a factor of 2), 41 ms may give a better result. The -m, -s, and -l flags
will cause the segment default to be automatically adjusted based on factor. For
example using -s (for speech) with a tempo of 1.25 will calculate a default segment
value of 32.
The optional search parameter gives the audio length in milliseconds over which the
algorithm will search for overlapping points. If no other flags are specified, the
default value is 14.68. Larger values use more processing time and may or may not
produce better results. A practical maximum is half the value of segment. Search
can be reduced to cut processing time at the risk of degrading output quality. The
-m, -s, and -l flags will cause the search default to be automatically adjusted
based on segment.
The optional overlap parameter gives the segment overlap length in milliseconds.
Default value is 12, but -m, -s, or -l flags automatically adjust overlap based on
segment size. Increasing overlap increases processing time and may increase
quality. A practical maximum for overlap is the value of search, with overlap
typically being (at least) a little smaller then search.
See also speed for an effect that changes tempo and pitch together, pitch and bend
for effects that change pitch only, and stretch for an effect that changes tempo
using a different algorithm.
treble gain [frequency[k] [width[s|h|k|o|q]]]
Apply a treble tone-control effect. See the description of the bass effect for
details.
tremolo speed [depth]
Apply a tremolo (low frequency amplitude modulation) effect to the audio. The
tremolo frequency in Hz is given by speed, and the depth as a percentage by depth
(default 40).
trim {position(+)}
Cuts portions out of the audio. Any number of positions may be given; audio is not
sent to the output until the first position is reached. The effect then alternates
between copying and discarding audio at each position. Using a value of 0 for the
first position parameter allows copying from the beginning of the audio.
For example,
sox infile outfile trim 0 10
will copy the first ten seconds, while
play infile trim 12:34 =15:00 -2:00
and
play infile trim 12:34 2:26 -2:00
will both play from 12 minutes 34 seconds into the audio up to 15 minutes into the
audio (i.e. 2 minutes and 26 seconds long), then resume playing two minutes before
the end of audio.
upsample [factor]
Upsample the signal by an integer factor: factor-1 zero-value samples are inserted
between each pair of input samples. As a result, the original spectrum is
replicated into the new frequency space (imaging) and attenuated. This attenuation
can be compensated for by adding vol factor after any further processing. The
upsample effect is typically used in combination with filtering effects.
For a general resampling effect with anti-imaging, see rate. See also downsample.
vad [options]
Voice Activity Detector. Attempts to trim silence and quiet background sounds from
the ends of (fairly high resolution i.e. 16-bit, 44-48kHz) recordings of speech.
The algorithm currently uses a simple cepstral power measurement to detect voice,
so may be fooled by other things, especially music. The effect can trim only from
the front of the audio, so in order to trim from the back, the reverse effect must
also be used. E.g.
play speech.wav norm vad
to trim from the front,
play speech.wav norm reverse vad reverse
to trim from the back, and
play speech.wav norm vad reverse vad reverse
to trim from both ends. The use of the norm effect is recommended, but remember
that neither reverse nor norm is suitable for use with streamed audio.
Options:
Default values are shown in parenthesis.
-t num (7)
The measurement level used to trigger activity detection. This might need
to be changed depending on the noise level, signal level and other
charactistics of the input audio.
-T num (0.25)
The time constant (in seconds) used to help ignore short bursts of sound.
-s num (1)
The amount of audio (in seconds) to search for quieter/shorter bursts of
audio to include prior to the detected trigger point.
-g num (0.25)
Allowed gap (in seconds) between quieter/shorter bursts of audio to include
prior to the detected trigger point.
-p num (0)
The amount of audio (in seconds) to preserve before the trigger point and
any found quieter/shorter bursts.
Advanced Options:
These allow fine tuning of the algorithm's internal parameters.
-b num The algorithm (internally) uses adaptive noise estimation/reduction in order
to detect the start of the wanted audio. This option sets the time for the
initial noise estimate.
-N num Time constant used by the adaptive noise estimator for when the noise level
is increasing.
-n num Time constant used by the adaptive noise estimator for when the noise level
is decreasing.
-r num Amount of noise reduction to use in the detection algorithm (e.g. 0, 0.5,
...).
-f num Frequency of the algorithm's processing/measurements.
-m num Measurement duration; by default, twice the measurement period; i.e. with
overlap.
-M num Time constant used to smooth spectral measurements.
-h num `Brick-wall' frequency of high-pass filter applied at the input to the
detector algorithm.
-l num `Brick-wall' frequency of low-pass filter applied at the input to the
detector algorithm.
-H num `Brick-wall' frequency of high-pass lifter used in the detector algorithm.
-L num `Brick-wall' frequency of low-pass lifter used in the detector algorithm.
See also the silence effect.
vol gain [type [limitergain]]
Apply an amplification or an attenuation to the audio signal. Unlike the -v option
(which is used for balancing multiple input files as they enter the SoX effects
processing chain), vol is an effect like any other so can be applied anywhere, and
several times if necessary, during the processing chain.
The amount to change the volume is given by gain which is interpreted, according to
the given type, as follows: if type is amplitude (or is omitted), then gain is an
amplitude (i.e. voltage or linear) ratio, if power, then a power (i.e. wattage or
voltage-squared) ratio, and if dB, then a power change in dB.
When type is amplitude or power, a gain of 1 leaves the volume unchanged, less than
1 decreases it, and greater than 1 increases it; a negative gain inverts the audio
signal in addition to adjusting its volume.
When type is dB, a gain of 0 leaves the volume unchanged, less than 0 decreases it,
and greater than 0 increases it.
See [4] for a detailed discussion on electrical (and hence audio signal) voltage
and power ratios.
Beware of Clipping when the increasing the volume.
The gain and the type parameters can be concatenated if desired, e.g. vol 10dB.
An optional limitergain value can be specified and should be a value much less than
1 (e.g. 0.05 or 0.02) and is used only on peaks to prevent clipping. Not
specifying this parameter will cause no limiter to be used. In verbose mode, this
effect will display the percentage of the audio that needed to be limited.
See also gain for a volume-changing effect with different capabilities, and compand
for a dynamic-range compression/expansion/limiting effect.
DIAGNOSTICS
Exit status is 0 for no error, 1 if there is a problem with the command-line parameters,
or 2 if an error occurs during file processing.
BUGS
Please report any bugs found in this version of SoX to the mailing list (sox-
users@lists.sourceforge.net).
SEE ALSO
soxi(1), soxformat(7), libsox(3)
audacity(1), gnuplot(1), octave(1), wget(1)
The SoX web site at http://sox.sourceforge.net
SoX scripting examples at http://sox.sourceforge.net/Docs/Scripts
References
[1] R. Bristow-Johnson, Cookbook formulae for audio EQ biquad filter coefficients,
http://musicdsp.org/files/Audio-EQ-Cookbook.txt
[2] Wikipedia, Q-factor, http://en.wikipedia.org/wiki/Q_factor
[3] Scott Lehman, Effects Explained, http://harmony-central.com/Effects/effects-
explained.html
[4] Wikipedia, Decibel, http://en.wikipedia.org/wiki/Decibel
[5] Richard Furse, Linux Audio Developer's Simple Plugin API, http://www.ladspa.org
[6] Richard Furse, Computer Music Toolkit, http://www.ladspa.org/cmt
[7] Steve Harris, LADSPA plugins, http://plugin.org.uk
LICENSE
Copyright 1998-2013 Chris Bagwell and SoX Contributors.
Copyright 1991 Lance Norskog and Sundry Contributors.
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
AUTHORS
Chris Bagwell (cbagwell@users.sourceforge.net). Other authors and contributors are listed
in the ChangeLog file that is distributed with the source code.