Provided by: systemd_256.5-2ubuntu3_amd64 
NAME
systemd-measure - Pre-calculate and sign expected TPM2 PCR values for booted unified
kernel images
SYNOPSIS
/usr/lib/systemd/systemd-measure [OPTIONS...]
DESCRIPTION
Note: this command is experimental for now. While it is likely to become a regular
component of systemd, it might still change in behaviour and interface.
systemd-measure is a tool that may be used to pre-calculate and sign the expected TPM2 PCR
11 values that should be seen when a Linux Unified Kernel Image (UKI)[1] based on systemd-
stub(7) is booted up. It accepts paths to the ELF kernel image file, initrd image file,
devicetree file, kernel command line file, os-release(5) file, boot splash file, and TPM2
PCR PEM public key file that make up the unified kernel image, and determines the PCR
values expected to be in place after booting the image. Calculation starts with a
zero-initialized PCR 11, and is executed in a fashion compatible with what systemd-stub
does at boot. The result may optionally be signed cryptographically, to allow TPM2
policies that can only be unlocked if a certain set of kernels is booted, for which such a
PCR signature can be provided.
It usually doesn't make sense to call this tool directly when constructing a UKI. Instead,
ukify(1) should be used; it will invoke systemd-measure and take care of embedding the
resulting measurements into the UKI.
COMMANDS
The following commands are understood:
status
This is the default command if none is specified. This queries the local system's TPM2
PCR 11+12+13 values and displays them. The data is written in a similar format as the
calculate command below, and may be used to quickly compare expectation with reality.
Added in version 252.
calculate
Pre-calculate the expected values seen in PCR register 11 after boot-up of a unified
kernel image consisting of the components specified with --linux=, --osrel=,
--cmdline=, --initrd=, --ucode=, --splash=, --dtb=, --uname=, --sbat=, --pcrpkey= see
below. Only --linux= is mandatory. (Alternatively, specify --current to use the
current values of PCR register 11 instead.)
Added in version 252.
sign
As with the calculate command, pre-calculate the expected value seen in TPM2 PCR
register 11 after boot-up of a unified kernel image. Then, cryptographically sign the
resulting values with the private/public key pair (RSA) configured via --private-key=
and --public-key=. This will write a JSON object to standard output that contains
signatures for all specified PCR banks (see the --bank= option below), which may be
used to unlock encrypted credentials (see systemd-creds(1)) or LUKS volumes (see
systemd-cryptsetup@.service(8)). This allows binding secrets to a set of kernels for
which such PCR 11 signatures can be provided.
Note that a TPM2 device must be available for this signing to take place, even though
the result is not tied to any TPM2 device or its state.
Added in version 252.
OPTIONS
The following options are understood:
--linux=PATH, --osrel=PATH, --cmdline=PATH, --initrd=PATH, --ucode=PATH, --splash=PATH,
--dtb=PATH, --uname=PATH, --sbat=PATH, --pcrpkey=PATH
When used with the calculate or sign verb, configures the files to read the unified
kernel image components from. Each option corresponds with the equally named section
in the unified kernel PE file. The --linux= switch expects the path to the ELF kernel
file that the unified PE kernel will wrap. All switches except --linux= are optional.
Each option may be used at most once.
Added in version 252.
--current
When used with the calculate or sign verb, takes the PCR 11 values currently in effect
for the system (which should typically reflect the hashes of the currently booted
kernel). This can be used in place of --linux= and the other switches listed above.
Added in version 252.
--bank=DIGEST
Controls the PCR banks to pre-calculate the PCR values for – in case calculate or sign
is invoked –, or the banks to show in the status output. May be used more then once to
specify multiple banks. If not specified, defaults to the four banks "sha1", "sha256",
"sha384", "sha512".
Added in version 252.
--private-key=PATH, --public-key=PATH, --certificate=PATH
These switches take paths to a pair of PEM encoded RSA key files, for use with the
sign command.
Note the difference between the --pcrpkey= and --public-key= switches. The former
selects the data to include in the ".pcrpkey" PE section of the unified kernel image,
the latter picks the public key of the key pair used to sign the resulting PCR 11
values. The former is the key that the booted system will likely use to lock disk and
credential encryption to, the latter is the key used for unlocking such resources
again. Hence, typically the same PEM key should be supplied in both cases.
If the --public-key= is not specified but --private-key= is specified the public key
is automatically derived from the private key.
--certificate= can be used to specify an X.509 certificate as an alternative to
--public-key= since v256.
Added in version 252.
--private-key=PATH/URI, --private-key-source=TYPE[:NAME], --certificate=PATH
As an alternative to --public-key= for the sign command, these switches can be used to
sign with an hardware token. The private key option can take a path or a URI that will
be passed to the OpenSSL engine or provider, as specified by --private-key-source= as
a type:name tuple, such as engine:pkcs11. The specified OpenSSL signing engine or
provider will be used to sign.
Added in version 256.
--tpm2-device=PATH
Controls which TPM2 device to use. Expects a device node path referring to the TPM2
chip (e.g. /dev/tpmrm0). Alternatively the special value "auto" may be specified, in
order to automatically determine the device node of a suitable TPM2 device (of which
there must be exactly one). The special value "list" may be used to enumerate all
suitable TPM2 devices currently discovered.
Added in version 252.
--phase=PHASE
Controls which boot phases to calculate expected PCR 11 values for. This takes a
series of colon-separated strings that encode boot "paths" for entering a specific
phase of the boot process. Each of the specified strings is measured by the
systemd-pcrphase-initrd.service, systemd-pcrphase-sysinit.service, and systemd-
pcrphase.service(8) into PCR 11 during different milestones of the boot process. This
switch may be specified multiple times to calculate PCR values for multiple boot
phases at once. If not used defaults to "enter-initrd", "enter-initrd:leave-initrd",
"enter-initrd:leave-initrd:sysinit", "enter-initrd:leave-initrd:sysinit:ready", i.e.
calculates expected PCR values for the boot phase in the initrd, during early boot,
during later boot, and during system runtime, but excluding the phases before the
initrd or when shutting down. This setting is honoured both by calculate and sign.
When used with the latter it's particularly useful for generating PCR signatures that
can only be used for unlocking resources during specific parts of the boot process.
For further details about PCR boot phases, see systemd-pcrphase.service(8).
Added in version 252.
--append=PATH
When generating a PCR JSON signature (via the sign command), combine it with a
previously generated PCR JSON signature, and output it as one. The specified path must
refer to a regular file that contains a valid JSON PCR signature object. The specified
file is not modified. It will be read first, then the newly generated signature
appended to it, and the resulting object is written to standard output. Use this to
generate a single JSON object consisting from signatures made with a number of signing
keys (for example, to have one key per boot phase). The command will suppress
duplicates: if a specific signature is already included in a JSON signature object it
is not added a second time.
Added in version 253.
--json=MODE
Shows output formatted as JSON. Expects one of "short" (for the shortest possible
output without any redundant whitespace or line breaks), "pretty" (for a pretty
version of the same, with indentation and line breaks) or "off" (to turn off JSON
output, the default).
--no-pager
Do not pipe output into a pager.
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
EXAMPLES
Example 1. Generate a unified kernel image, and calculate the expected TPM PCR 11 value
$ ukify --output=vmlinux.efi \
--os-release=@os-release.txt \
--cmdline=@cmdline.txt \
--splash=splash.bmp \
--devicetree=devicetree.dtb \
--measure \
vmlinux initrd.cpio
11:sha1=d775a7b4482450ac77e03ee19bda90bd792d6ec7
11:sha256=bc6170f9ce28eb051ab465cd62be8cf63985276766cf9faf527ffefb66f45651
11:sha384=1cf67dff4757e61e5...7f49ad720be02fd07263e1f93061243aec599d1ee4b4
11:sha512=8e79acd3ddbbc8282...0c3e8ec0c714821032038f525f744960bcd082d937da
ukify(1) internally calls systemd-measure. The output with hashes is from systemd-measure.
Example 2. Generate a private/public key pair, a unified kernel image, and a TPM PCR 11
signature for it, and embed the signature and the public key in the image
$ openssl genpkey -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -out tpm2-pcr-private.pem
..+.+++++++++......+.........+......+.......+....+.....+.+...+..........
$ openssl rsa -pubout -in tpm2-pcr-private.pem -out tpm2-pcr-public.pem
# systemd-measure sign \
--linux=vmlinux \
--osrel=os-release.txt \
--cmdline=cmdline.txt \
--initrd=initrd.cpio \
--splash=splash.bmp \
--dtb=devicetree.dtb \
--pcrpkey=tpm2-pcr-public.pem \
--bank=sha1 \
--bank=sha256 \
--private-key=tpm2-pcr-private.pem \
--public-key=tpm2-pcr-public.pem >tpm2-pcr-signature.json
# ukify --output=vmlinuz.efi \
--os-release=@os-release.txt \
--cmdline=@cmdline.txt \
--splash=splash.bmp \
--devicetree=devicetree.dtb \
--pcr-private-key=tpm2-pcr-private.pem \
--pcr-public-key=tpm2-pcr-public.pem \
--pcr-banks=sha1,sha256 \
vmlinux initrd.cpio
Later on, enroll the signed PCR policy on a LUKS volume:
# systemd-cryptenroll --tpm2-device=auto \
--tpm2-public-key=tpm2-pcr-public.pem \
--tpm2-signature=tpm2-pcr-signature.json \
/dev/sda5
And then unlock the device with the signature:
# systemd-cryptsetup attach \
volume5 /dev/sda5 - \
tpm2-device=auto,tpm2-signature=/path/to/tpm2-pcr-signature.json
Note that when the generated unified kernel image vmlinux.efi is booted, the signature and
public key files will be placed at locations systemd-cryptenroll and systemd-cryptsetup
will look for anyway, and thus these paths do not actually need to be specified.
Example 3. Introduce a second public key, signing the same kernel PCR measurements, but
only for the initrd boot phase
This example extends the previous one, but we now introduce a second signing key that is
only used to sign PCR policies restricted to the initrd boot phase. This can be used to
lock down root volumes in a way that they can only be unlocked before the transition to
the host system. Thus we have two classes of secrets or credentials: one that can be
unlocked during the entire runtime, and the other that can only be used in the initrd.
$ openssl genpkey -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -out tpm2-pcr-private.pem
.+........+.+........+.......+...+...+........+....+......+..+..........
$ openssl rsa -pubout -in tpm2-pcr-private.pem -out tpm2-pcr-public.pem
$ openssl genpkey -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -out tpm2-pcr-initrd-private.pem
..+.......++........+........+......+........+....+.....+.+..+..........
$ openssl rsa -pubout -in tpm2-pcr-initrd-private.pem -out tpm2-pcr-initrd-public.pem
# ukify --output vmlinux-1.2.3.efi \
--os-release=@os-release.txt \
--cmdline=@cmdline.txt \
--splash=splash.bmp \
--devicetree=devicetree.dtb \
--pcr-private-key=tpm2-pcr-private.pem \
--pcr-public-key=tpm2-pcr-public.pem \
--phases=enter-initrd,enter-initrd:leave-initrd,enter-initrd:leave-initrd:sysinit,enter-initrd:leave-initrd:sysinit:ready \
--pcr-banks=sha1,sha256 \
--pcr-private-key=tpm2-pcr-initrd-private.pem \
--pcr-public-key=tpm2-pcr-initrd-public.pem \
--phases=enter-initrd \
vmlinux-1.2.3 initrd.cpio \
--uname=1.2.3
+ /usr/lib/systemd/systemd-measure sign --linux=vmlinux-1.2.3 \
--osrel=os-release.txt --cmdline=cmdline.txt --dtb=devicetree.dtb \
--splash=splash.bmp --initrd=initrd.cpio --bank=sha1 --bank=sha256 \
--private-key=tpm2-pcr-private.pem --public-key=tpm2-pcr-public.pem \
--phase=enter-initrd --phase=enter-initrd:leave-initrd \
--phase=enter-initrd:leave-initrd:sysinit \
--phase=enter-initrd:leave-initrd:sysinit:ready
+ /usr/lib/systemd/systemd-measure sign --linux=vmlinux-1.2.3 \
--osrel=os-release.txt --cmdline=cmdline.txt --dtb=devicetree.dtb \
--splash=splash.bmp --initrd=initrd.cpio --bank=sha1 --bank=sha256 \
--private-key=tpm2-pcr-initrd-private.pem \
--public-key=tpm2-pcr-initrd-public.pem \
--phase=enter-initrd
Wrote unsigned vmlinux-1.2.3.efi
ukify prints out both invocations of systemd-measure as informative output (the lines
starting with "+"); this allows us to see how systemd-measure is called. It then merges
the output of both invocations into the ".pcrsig" section. systemd-measure may also do
this merge itself using the --append= option.
Note that in this example the ".pcrpkey" PE section contains the key specified by the
first --pcr-private-key= option, covering all boot phases. The ".pcrpkey" section is used
in the default policies of systemd-cryptenroll and systemd-creds. To use the stricter
policy bound to tpm-pcr-initrd-public.pem, specify --tpm2-public-key= on the command line
of those tools.
EXIT STATUS
On success, 0 is returned, a non-zero failure code otherwise.
SEE ALSO
systemd(1), systemd-stub(7), ukify(1), systemd-creds(1), systemd-cryptsetup@.service(8),
systemd-pcrphase.service(8)
NOTES
1. Unified Kernel Image (UKI)
https://uapi-group.org/specifications/specs/unified_kernel_image/