Provided by: zsh-common_5.9-6ubuntu3_all 
NAME
zshcompwid - zsh completion widgets
DESCRIPTION
The shell's programmable completion mechanism can be manipulated in two ways; here the low-level features
supporting the newer, function-based mechanism are defined. A complete set of shell functions based on
these features is described in zshcompsys(1), and users with no interest in adding to that system (or,
potentially, writing their own -- see dictionary entry for `hubris') should skip the current section.
The older system based on the compctl builtin command is described in zshcompctl(1).
Completion widgets are defined by the -C option to the zle builtin command provided by the zsh/zle module
(see zshzle(1)). For example,
zle -C complete expand-or-complete completer
defines a widget named `complete'. The second argument is the name of any of the builtin widgets that
handle completions: complete-word, expand-or-complete, expand-or-complete-prefix, menu-complete,
menu-expand-or-complete, reverse-menu-complete, list-choices, or delete-char-or-list. Note that this
will still work even if the widget in question has been re-bound.
When this newly defined widget is bound to a key using the bindkey builtin command defined in the zsh/zle
module (see zshzle(1)), typing that key will call the shell function `completer'. This function is
responsible for generating completion matches using the builtins described below. As with other ZLE
widgets, the function is called with its standard input closed.
Once the function returns, the completion code takes over control again and treats the matches in the
same manner as the specified builtin widget, in this case expand-or-complete.
COMPLETION SPECIAL PARAMETERS
The parameters ZLE_REMOVE_SUFFIX_CHARS and ZLE_SPACE_SUFFIX_CHARS are used by the completion mechanism,
but are not special. See Parameters Used By The Shell in zshparam(1).
Inside completion widgets, and any functions called from them, some parameters have special meaning;
outside these functions they are not special to the shell in any way. These parameters are used to pass
information between the completion code and the completion widget. Some of the builtin commands and the
condition codes use or change the current values of these parameters. Any existing values will be hidden
during execution of completion widgets; except for compstate, the parameters are reset on each function
exit (including nested function calls from within the completion widget) to the values they had when the
function was entered.
CURRENT
This is the number of the current word, i.e. the word the cursor is currently on in the words
array. Note that this value is only correct if the ksharrays option is not set.
IPREFIX
Initially this will be set to the empty string. This parameter functions like PREFIX; it contains
a string which precedes the one in PREFIX and is not considered part of the list of matches.
Typically, a string is transferred from the beginning of PREFIX to the end of IPREFIX, for
example:
IPREFIX=${PREFIX%%\=*}=
PREFIX=${PREFIX#*=}
causes the part of the prefix up to and including the first equal sign not to be treated as part
of a matched string. This can be done automatically by the compset builtin, see below.
ISUFFIX
As IPREFIX, but for a suffix that should not be considered part of the matches; note that the
ISUFFIX string follows the SUFFIX string.
PREFIX Initially this will be set to the part of the current word from the beginning of the word up to
the position of the cursor; it may be altered to give a common prefix for all matches.
QIPREFIX
This parameter is read-only and contains the quoted string up to the word being completed. E.g.
when completing `"foo', this parameter contains the double quote. If the -q option of compset is
used (see below), and the original string was `"foo bar' with the cursor on the `bar', this
parameter contains `"foo '.
QISUFFIX
Like QIPREFIX, but containing the suffix.
SUFFIX Initially this will be set to the part of the current word from the cursor position to the end; it
may be altered to give a common suffix for all matches. It is most useful when the option
COMPLETE_IN_WORD is set, as otherwise the whole word on the command line is treated as a prefix.
compstate
This is an associative array with various keys and values that the completion code uses to
exchange information with the completion widget. The keys are:
all_quotes
The -q option of the compset builtin command (see below) allows a quoted string to be
broken into separate words; if the cursor is on one of those words, that word will be
completed, possibly invoking `compset -q' recursively. With this key it is possible to
test the types of quoted strings which are currently broken into parts in this fashion.
Its value contains one character for each quoting level. The characters are a single quote
or a double quote for strings quoted with these characters, a dollars sign for strings
quoted with $'...' and a backslash for strings not starting with a quote character. The
first character in the value always corresponds to the innermost quoting level.
context
This will be set by the completion code to the overall context in which completion is
attempted. Possible values are:
array_value
when completing inside the value of an array parameter assignment; in this case the
words array contains the words inside the parentheses.
brace_parameter
when completing the name of a parameter in a parameter expansion beginning with ${.
This context will also be set when completing parameter flags following ${(; the
full command line argument is presented and the handler must test the value to be
completed to ascertain that this is the case.
assign_parameter
when completing the name of a parameter in a parameter assignment.
command
when completing for a normal command (either in command position or for an argument
of the command).
condition
when completing inside a `[[...]]' conditional expression; in this case the words
array contains only the words inside the conditional expression.
math when completing in a mathematical environment such as a `((...))' construct.
parameter
when completing the name of a parameter in a parameter expansion beginning with $
but not ${.
redirect
when completing after a redirection operator.
subscript
when completing inside a parameter subscript.
value when completing the value of a parameter assignment.
exact Controls the behaviour when the REC_EXACT option is set. It will be set to accept if an
exact match would be accepted, and will be unset otherwise.
If it was set when at least one match equal to the string on the line was generated, the
match is accepted.
exact_string
The string of an exact match if one was found, otherwise unset.
ignored
The number of completions that were ignored because they matched one of the patterns given
with the -F option to the compadd builtin command.
insert This controls the manner in which a match is inserted into the command line. On entry to
the widget function, if it is unset the command line is not to be changed; if set to
unambiguous, any prefix common to all matches is to be inserted; if set to
automenu-unambiguous, the common prefix is to be inserted and the next invocation of the
completion code may start menu completion (due to the AUTO_MENU option being set); if set
to menu or automenu menu completion will be started for the matches currently generated (in
the latter case this will happen because the AUTO_MENU is set). The value may also contain
the string `tab' when the completion code would normally not really do completion, but only
insert the TAB character.
On exit it may be set to any of the values above (where setting it to the empty string is
the same as unsetting it), or to a number, in which case the match whose number is given
will be inserted into the command line. Negative numbers count backward from the last
match (with `-1' selecting the last match) and out-of-range values are wrapped around, so
that a value of zero selects the last match and a value one more than the maximum selects
the first. Unless the value of this key ends in a space, the match is inserted as in a menu
completion, i.e. without automatically appending a space.
Both menu and automenu may also specify the number of the match to insert, given after a
colon. For example, `menu:2' says to start menu completion, beginning with the second
match.
Note that a value containing the substring `tab' makes the matches generated be ignored and
only the TAB be inserted.
Finally, it may also be set to all, which makes all matches generated be inserted into the
line.
insert_positions
When the completion system inserts an unambiguous string into the line, there may be
multiple places where characters are missing or where the character inserted differs from
at least one match. The value of this key contains a colon separated list of all these
positions, as indexes into the command line.
last_prompt
If this is set to a non-empty string for every match added, the completion code will move
the cursor back to the previous prompt after the list of completions has been displayed.
Initially this is set or unset according to the ALWAYS_LAST_PROMPT option.
list This controls whether or how the list of matches will be displayed. If it is unset or
empty they will never be listed; if its value begins with list, they will always be listed;
if it begins with autolist or ambiguous, they will be listed when the AUTO_LIST or
LIST_AMBIGUOUS options respectively would normally cause them to be.
If the substring force appears in the value, this makes the list be shown even if there is
only one match. Normally, the list would be shown only if there are at least two matches.
The value contains the substring packed if the LIST_PACKED option is set. If this substring
is given for all matches added to a group, this group will show the LIST_PACKED behavior.
The same is done for the LIST_ROWS_FIRST option with the substring rows.
Finally, if the value contains the string explanations, only the explanation strings, if
any, will be listed and if it contains messages, only the messages (added with the -x
option of compadd) will be listed. If it contains both explanations and messages both
kinds of explanation strings will be listed. It will be set appropriately on entry to a
completion widget and may be changed there.
list_lines
This gives the number of lines that are needed to display the full list of completions.
Note that to calculate the total number of lines to display you need to add the number of
lines needed for the command line to this value, this is available as the value of the
BUFFERLINES special parameter.
list_max
Initially this is set to the value of the LISTMAX parameter. It may be set to any other
value; when the widget exits this value will be used in the same way as the value of
LISTMAX.
nmatches
The number of matches added by the completion code so far.
old_insert
On entry to the widget this will be set to the number of the match of an old list of
completions that is currently inserted into the command line. If no match has been
inserted, this is unset.
As with old_list, the value of this key will only be used if it is the string keep. If it
was set to this value by the widget and there was an old match inserted into the command
line, this match will be kept and if the value of the insert key specifies that another
match should be inserted, this will be inserted after the old one.
old_list
This is set to yes if there is still a valid list of completions from a previous completion
at the time the widget is invoked. This will usually be the case if and only if the
previous editing operation was a completion widget or one of the builtin completion
functions. If there is a valid list and it is also currently shown on the screen, the
value of this key is shown.
After the widget has exited the value of this key is only used if it was set to keep. In
this case the completion code will continue to use this old list. If the widget generated
new matches, they will not be used.
parameter
The name of the parameter when completing in a subscript or in the value of a parameter
assignment.
pattern_insert
Normally this is set to menu, which specifies that menu completion will be used whenever a
set of matches was generated using pattern_match (see below). If it is set to any other
non-empty string by the user and menu completion is not selected by other option settings,
the code will instead insert any common prefix for the generated matches as with normal
completion.
pattern_match
Locally controls the behaviour given by the GLOB_COMPLETE option. Initially it is set to
`*' if and only if the option is set. The completion widget may set it to this value, to
an empty string (which has the same effect as unsetting it), or to any other non-empty
string. If it is non-empty, unquoted metacharacters on the command line will be treated as
patterns; if it is `*', then additionally a wildcard `*' is assumed at the cursor position;
if it is empty or unset, metacharacters will be treated literally.
Note that the match specifications given to the compadd builtin command are not used if
this is set to a non-empty string.
quote When completing inside quotes, this contains the quotation character (i.e. either a single
quote, a double quote, or a backtick). Otherwise it is unset.
quoting
When completing inside single quotes, this is set to the string single; inside double
quotes, the string double; inside backticks, the string backtick. Otherwise it is unset.
redirect
The redirection operator when completing in a redirection position, i.e. one of <, >, etc.
restore
This is set to auto before a function is entered, which forces the special parameters
mentioned above (words, CURRENT, PREFIX, IPREFIX, SUFFIX, and ISUFFIX) to be restored to
their previous values when the function exits. If a function unsets it or sets it to any
other string, they will not be restored.
to_end Specifies the occasions on which the cursor is moved to the end of a string when a match is
inserted. On entry to a widget function, it may be single if this will happen when a
single unambiguous match was inserted or match if it will happen any time a match is
inserted (for example, by menu completion; this is likely to be the effect of the
ALWAYS_TO_END option).
On exit, it may be set to single as above. It may also be set to always, or to the empty
string or unset; in those cases the cursor will be moved to the end of the string always or
never respectively. Any other string is treated as match.
unambiguous
This key is read-only and will always be set to the common (unambiguous) prefix the
completion code has generated for all matches added so far.
unambiguous_cursor
This gives the position the cursor would be placed at if the common prefix in the
unambiguous key were inserted, relative to the value of that key. The cursor would be
placed before the character whose index is given by this key.
unambiguous_positions
This contains all positions where characters in the unambiguous string are missing or where
the character inserted differs from at least one of the matches. The positions are given
as indexes into the string given by the value of the unambiguous key.
vared If completion is called while editing a line using the vared builtin, the value of this key
is set to the name of the parameter given as an argument to vared. This key is only set
while a vared command is active.
words This array contains the words present on the command line currently being edited.
COMPLETION BUILTIN COMMANDS
compadd [ -akqQfenUl12C ] [ -F array ]
[-P prefix ] [ -S suffix ]
[-p hidden-prefix ] [ -s hidden-suffix ]
[-i ignored-prefix ] [ -I ignored-suffix ]
[-W file-prefix ] [ -d array ]
[-J group-name ] [ -X explanation ] [ -x message ]
[-V group-name ] [ -o [ order ] ]
[-r remove-chars ] [ -R remove-func ]
[-D array ] [ -O array ] [ -A array ]
[-E number ]
[-M match-spec ] [ -- ] [ completions ... ]
This builtin command can be used to add matches directly and control all the information the
completion code stores with each possible completion. The return status is zero if at least one
match was added and non-zero if no matches were added.
The completion code breaks each match into seven fields in the order:
<ipre><apre><hpre><body><hsuf><asuf><isuf>
The first field is an ignored prefix taken from the command line, the contents of the IPREFIX
parameter plus the string given with the -i option. With the -U option, only the string from the
-i option is used. The field <apre> is an optional prefix string given with the -P option. The
<hpre> field is a string that is considered part of the match but that should not be shown when
listing completions, given with the -p option; for example, functions that do filename generation
might specify a common path prefix this way. <body> is the part of the match that should appear
in the list of matches shown to the user. The suffixes <hsuf>, <asuf> and <isuf> correspond to
the prefixes <hpre>, <apre> and <ipre> and are given by the options -s, -S and -I, respectively.
The supported flags are:
-P prefix
This gives a string to be inserted before each match. The string given is not considered
as part of the match and any shell metacharacters in it will not be quoted when the string
is inserted.
-S suffix
Like -P, but gives a string to be inserted after each match.
-p hidden-prefix
This gives a string that should be inserted before each match but that should not appear in
the list of matches. Unless the -U option is given, this string must be matched as part of
the string on the command line.
-s hidden-suffix
Like `-p', but gives a string to insert after each match.
-i ignored-prefix
This gives a string to insert just before any string given with the `-P' option. Without
`-P' the string is inserted before the string given with `-p' or directly before each
match.
-I ignored-suffix
Like -i, but gives an ignored suffix.
-a With this flag the completions are taken as names of arrays and the actual completions are
their values. If only some elements of the arrays are needed, the completions may also
contain subscripts, as in `foo[2,-1]'.
-k With this flag the completions are taken as names of associative arrays and the actual
completions are their keys. As for -a, the words may also contain subscripts, as in
`foo[(R)*bar*]'.
-d array
This adds per-completion display strings. The array should contain one element per
completion given. The completion code will then display the first element instead of the
first completion, and so on. The array may be given as the name of an array parameter or
directly as a space-separated list of words in parentheses.
If there are fewer display strings than completions, the leftover completions will be
displayed unchanged and if there are more display strings than completions, the leftover
display strings will be silently ignored.
-l This option only has an effect if used together with the -d option. If it is given, the
display strings are listed one per line, not arrayed in columns.
-o [ order ]
This controls the order in which matches are sorted. order is a comma-separated list
comprising the following possible values. These values can be abbreviated to their initial
two or three characters. Note that the order forms part of the group name space so matches
with different orderings will not be in the same group.
match If given, the order of the output is determined by the match strings; otherwise it
is determined by the display strings (i.e. the strings given by the -d option). This
is the default if `-o' is specified but the order argument is omitted.
nosort This specifies that the completions are pre-sorted and their order should be
preserved. This value only makes sense alone and cannot be combined with any
others.
numeric
If the matches include numbers, sort them numerically rather than lexicographically.
reverse
Arrange the matches backwards by reversing the sort ordering.
-J group-name
Gives the name of the group that the matches should be stored in.
-V group-name
Like -J but naming an unsorted group. This option is identical to the combination of -J and
-o nosort.
-1 If given together with the -V option, makes only consecutive duplicates in the group be
removed. If combined with the -J option, this has no visible effect. Note that groups with
and without this flag are in different name spaces.
-2 If given together with the -J or -V option, makes all duplicates be kept. Again, groups
with and without this flag are in different name spaces.
-X explanation
The explanation string will be printed with the list of matches, above the group currently
selected.
Within the explanation, the following sequences may be used to specify output attributes as
described in the section EXPANSION OF PROMPT SEQUENCES in zshmisc(1): `%B', `%S', `%U',
`%F', `%K' and their lower case counterparts, as well as `%{...%}'. `%F', `%K' and
`%{...%}' take arguments in the same form as prompt expansion. (Note that the sequence
`%G' is not available; an argument to `%{' should be used instead.) The sequence `%%'
produces a literal `%'.
These sequences are most often employed by users when customising the format style (see
zshcompsys(1)), but they must also be taken into account when writing completion functions,
as passing descriptions with unescaped `%' characters to utility functions such as
_arguments and _message may produce unexpected results. If arbitrary text is to be passed
in a description, it can be escaped using e.g. ${my_str//\%/%%}.
-x message
Like -X, but the message will be printed even if there are no matches in the group.
-q The suffix given with -S will be automatically removed if the next character typed is a
blank or does not insert anything, or if the suffix consists of only one character and the
next character typed is the same character.
-r remove-chars
This is a more versatile form of the -q option. The suffix given with -S or the slash
automatically added after completing directories will be automatically removed if the next
character typed inserts one of the characters given in the remove-chars. This string is
parsed as a characters class and understands the backslash sequences used by the print
command. For example, `-r "a-z\t"' removes the suffix if the next character typed inserts
a lower case character or a TAB, and `-r "^0-9"' removes the suffix if the next character
typed inserts anything but a digit. One extra backslash sequence is understood in this
string: `\-' stands for all characters that insert nothing. Thus `-S "=" -q' is the same as
`-S "=" -r "= \t\n\-"'.
This option may also be used without the -S option; then any automatically added space will
be removed when one of the characters in the list is typed.
-R remove-func
This is another form of the -r option. When a match has been accepted and a suffix has been
inserted, the function remove-func will be called after the next character typed. It is
passed the length of the suffix as an argument and can use the special parameters available
in ordinary (non-completion) zle widgets (see zshzle(1)) to analyse and modify the command
line.
-f If this flag is given, all of the matches built from the completions are marked as being
the names of files. They are not required to be actual filenames, but if they are, and the
option LIST_TYPES is set, the characters describing the types of the files in the
completion lists will be shown. This also forces a slash to be added when the name of a
directory is completed.
-e This flag can be used to tell the completion code that the matches added are parameter
names for a parameter expansion. This will make the AUTO_PARAM_SLASH and AUTO_PARAM_KEYS
options be used for the matches.
-W file-prefix
This string is a pathname that will be prepended to each match together with any prefix
specified by the -p option to form a complete filename for testing. Hence it is only
useful if combined with the -f flag, as the tests will not otherwise be performed.
-F array
Specifies an array containing patterns. completions that match one of these patterns are
ignored, that is, not considered to be matches.
The array may be the name of an array parameter or a list of literal patterns enclosed in
parentheses and quoted, as in `-F "(*?.o *?.h)"'. If the name of an array is given, the
elements of the array are taken as the patterns.
-Q This flag instructs the completion code not to quote any metacharacters in the matches when
inserting them into the command line.
-M match-spec
This gives local match specifications as described below in the section `Completion
Matching Control'. This option may be given more than once. In this case all match-specs
given are concatenated with spaces between them to form the specification string to use.
Note that they will only be used if the -U option is not given.
-n Specifies that matching completions are to be added to the set of matches, but are not to
be listed to the user.
-U If this flag is given, all completions are added to the set of matches and no matching will
be done by the completion code. Normally this is used in functions that do the matching
themselves.
-O array
If this option is given, the completions are not added to the set of matches. Instead,
matching is done as usual and all of the completions that match will be stored in the array
parameter whose name is given as array.
-A array
As the -O option, except that instead of those of the completions which match being stored
in array, the strings generated internally by the completion code are stored. For example,
with a match specification of `-M "L:|no="', a current word of `nof' and completions of
`foo', this option stores the string `nofoo' in the array, whereas the -O option stores the
`foo' originally given.
-D array
As with -O, the completions are not added to the set of matches. Instead, whenever the nth
completion does not match, the nth element of the array is removed. Elements for which the
corresponding completion matches are retained. This option can be used more than once to
remove elements from multiple arrays.
-C This option adds a special match which expands to all other matches when inserted into the
line, even those that are added after this option is used. Together with the -d option it
is possible to specify a string that should be displayed in the list for this special
match. If no string is given, it will be shown as a string containing the strings that
would be inserted for the other matches, truncated to the width of the screen.
-E number
This option adds number empty matches after matching completions have been added. An empty
match takes up space in completion listings but will never be inserted in the line and
can't be selected with menu completion or menu selection. This makes empty matches only
useful to format completion lists and to make explanatory string be shown in completion
lists (since empty matches can be given display strings with the -d option). And because
all but one empty string would otherwise be removed, this option implies the -V and -2
options (even if an explicit -J option is given). This can be important to note as it
affects the name space into which matches are added.
-
-- This flag ends the list of flags and options. All arguments after it will be taken as the
completions even if they begin with hyphens.
Except for the -M flag, if any of these flags is given more than once, the first one (and its
argument) will be used.
compset -p number
compset -P [ number ] pattern
compset -s number
compset -S [ number ] pattern
compset -n begin [ end ]
compset -N beg-pat [ end-pat ]
compset -q
This command simplifies modification of the special parameters, while its return status allows
tests on them to be carried out.
The options are:
-p number
If the value of the PREFIX parameter is at least number characters long, the first number
characters are removed from it and appended to the contents of the IPREFIX parameter.
-P [ number ] pattern
If the value of the PREFIX parameter begins with anything that matches the pattern, the
matched portion is removed from PREFIX and appended to IPREFIX.
Without the optional number, the longest match is taken, but if number is given, anything
up to the numberth match is moved. If the number is negative, the numberth longest match
is moved. For example, if PREFIX contains the string `a=b=c', then compset -P '*\=' will
move the string `a=b=' into the IPREFIX parameter, but compset -P 1 '*\=' will move only
the string `a='.
-s number
As -p, but transfer the last number characters from the value of SUFFIX to the front of the
value of ISUFFIX.
-S [ number ] pattern
As -P, but match the last portion of SUFFIX and transfer the matched portion to the front
of the value of ISUFFIX.
-n begin [ end ]
If the current word position as specified by the parameter CURRENT is greater than or equal
to begin, anything up to the beginth word is removed from the words array and the value of
the parameter CURRENT is decremented by begin.
If the optional end is given, the modification is done only if the current word position is
also less than or equal to end. In this case, the words from position end onwards are also
removed from the words array.
Both begin and end may be negative to count backwards from the last element of the words
array.
-N beg-pat [ end-pat ]
If one of the elements of the words array before the one at the index given by the value of
the parameter CURRENT matches the pattern beg-pat, all elements up to and including the
matching one are removed from the words array and the value of CURRENT is changed to point
to the same word in the changed array.
If the optional pattern end-pat is also given, and there is an element in the words array
matching this pattern, the parameters are modified only if the index of this word is higher
than the one given by the CURRENT parameter (so that the matching word has to be after the
cursor). In this case, the words starting with the one matching end-pat are also removed
from the words array. If words contains no word matching end-pat, the testing and
modification is performed as if it were not given.
-q The word currently being completed is split on spaces into separate words, respecting the
usual shell quoting conventions. The resulting words are stored in the words array, and
CURRENT, PREFIX, SUFFIX, QIPREFIX, and QISUFFIX are modified to reflect the word part that
is completed.
In all the above cases the return status is zero if the test succeeded and the parameters were
modified and non-zero otherwise. This allows one to use this builtin in tests such as:
if compset -P '*\='; then ...
This forces anything up to and including the last equal sign to be ignored by the completion code.
compcall [ -TD ]
This allows the use of completions defined with the compctl builtin from within completion
widgets. The list of matches will be generated as if one of the non-widget completion functions
(complete-word, etc.) had been called, except that only compctls given for specific commands are
used. To force the code to try completions defined with the -T option of compctl and/or the
default completion (whether defined by compctl -D or the builtin default) in the appropriate
places, the -T and/or -D flags can be passed to compcall.
The return status can be used to test if a matching compctl definition was found. It is non-zero
if a compctl was found and zero otherwise.
Note that this builtin is defined by the zsh/compctl module.
COMPLETION CONDITION CODES
The following additional condition codes for use within the [[ ... ]] construct are available in
completion widgets. These work on the special parameters. All of these tests can also be performed by
the compset builtin, but in the case of the condition codes the contents of the special parameters are
not modified.
-prefix [ number ] pattern
true if the test for the -P option of compset would succeed.
-suffix [ number ] pattern
true if the test for the -S option of compset would succeed.
-after beg-pat
true if the test of the -N option with only the beg-pat given would succeed.
-between beg-pat end-pat
true if the test for the -N option with both patterns would succeed.
COMPLETION MATCHING CONTROL
When the user invokes completion, the current word on the command line (that is, the word the cursor is
currently on) is used to generate a match pattern. Only those completions that match the pattern are
offered to the user as matches.
The default match pattern is generated from the current word by either
• appending a `*' (matching any number of characters in a completion) or,
• if the shell option COMPLETE_IN_WORD is set, inserting a `*' at the cursor position.
This narrow pattern can be broadened selectively by passing a match specification to the compadd builtin
command through its -M option (see `Completion Builtin Commands' above). A match specification consists
of one or more matchers separated by whitespace. Matchers in a match specification are applied one at a
time, from left to right. Once all matchers have been applied, completions are compared to the final
match pattern and non-matching ones are discarded.
• Note that the -M option is ignored if the current word contains a glob pattern and the shell
option GLOB_COMPLETE is set or if the pattern_match key of the special associative array compstate
is set to a non-empty value (see `Completion Special Parameters' above).
• Users of the completion system (see zshcompsys(1)) should generally not use the -M option
directly, but rather use the matcher-list and matcher styles (see the subsection Standard Styles
in the documentation for COMPLETION SYSTEM CONFIGURATION in zshcompsys(1)).
Each matcher consists of
• a case-sensitive letter
• a `:',
• one or more patterns separated by pipes (`|'),
• an equals sign (`='), and
• another pattern.
The patterns before the `=' are used to match substrings of the current word. For each matched
substring, the corresponding part of the match pattern is broadened with the pattern after the `=', by
means of a logical OR.
Each pattern in a matcher cosists of either
• the empty string or
• a sequence of
• literal characters (which may be quoted with a `\'),
• question marks (`?'),
• bracket expressions (`[...]'; see the subsection Glob Operators in the documentation for
GLOB OPERATORS in zshexpn(1)), and/or
• brace expressions (see below).
Other shell patterns are not allowed.
A brace expression, like a bracket expression, consists of a list of
• literal characters,
• ranges (`0-9'), and/or
• character classes (`[:name:]').
However, they differ from each other as follows:
• A brace expression is delimited by a pair of braces (`{...}').
• Brace expressions do not support negations. That is, an initial `!' or `^' has no special meaning
and will be interpreted as a literal character.
• When a character in the current word matches the nth pattern in a brace expression, the
corresponding part of the match pattern is broadened only with the nth pattern of the brace
expression on the other side of the `=', if there is one; if there is no brace expression on the
other side, then this pattern is the empty string. However, if either brace expression has more
elements than the other, then the excess entries are simply ignored. When comparing indexes, each
literal character or character class counts as one element, but each range is instead expanded to
the full list of literal characters it represents. Additionally, if on both sides of the `=', the
nth pattern is `[:upper:]' or `[:lower:]', then these are expanded as ranges, too.
Note that, although the matching system does not yet handle multibyte characters, this is likely to be a
future extension. Hence, using `[:upper:]' and `[:lower:]' is recommended over `A-Z' and `a-z'.
Below are the different forms of matchers supported. Each uppercase form behaves exactly like its
lowercase counterpart, but adds an additional step after the match pattern has filtered out non-matching
completions: Each of a match's substrings that was matched by a subpattern from an uppercase matcher is
replaced with the corresponding substring of the current word. However, patterns from lowercase matchers
have higher weight: If a substring of the current word was matched by patterns from both a lowercase and
an uppercase matcher, then the lowercase matcher's pattern wins and the corresponding part of the match
is not modified.
Unless indicated otherwise, each example listed assumes COMPLETE_IN_WORD to be unset (as it is by
default).
m:word-pat=match-pat
M:word-pat=match-pat
For each substring of the current word that matches word-pat, broaden the corresponding part of
the match pattern to additionally match match-pat.
Examples:
m:{[:lower:]}={[:upper:]} lets any lower case character in the current word be completed to
itself or its uppercase counterpart. So, the completions `foo', `FOO' and `Foo' will are
be considered matches for the word `fo'.
M:_= inserts every underscore from the current word into each match, in the same relative
position, determined by matching the substrings around it. So, given a completion `foo',
the word `f_o' will be completed to the match `f_oo', even though the latter was not
present as a completion.
b:word-pat=match-pat
B:word-pat=match-pat
e:word-pat=match-pat
E:word-pat=match-pat
For each consecutive substring at the b:eginning or e:nd of the current word that matches
word-pat, broaden the corresponding part of the match pattern to additionally match match-pat.
Examples:
`b:-=+' lets any number of minuses at the start of the current word be completed to a minus
or a plus.
`B:0=' adds all zeroes at the beginning of the current word to the beginning of each match.
l:|word-pat=match-pat
L:|word-pat=match-pat
R:word-pat|=match-pat
r:word-pat|=match-pat
If there is a substring at the l:eft or r:ight edge of the current word that matches word-pat,
then broaden the corresponding part of the match pattern to additionally match match-pat.
For each l:, L:, r: and R: matcher (including the ones below), the pattern match-pat may also be a
`*'. This matches any number of characters in a completion.
Examples:
`r:|=*' appends a `*' to the match pattern, even when COMPLETE_IN_WORD is set and the
cursor is not at the end of the current word.
If the current word starts with a minus, then `L:|-=' will prepend it to each match.
l:anchor|word-pat=match-pat
L:anchor|word-pat=match-pat
r:word-pat|anchor=match-pat
R:word-pat|anchor=match-pat
For each substring of the current word that matches word-pat and has on its l:eft or r:ight
another substring matching anchor, broaden the corresponding part of the match pattern to
additionally match match-pat.
Note that these matchers (and the ones below) modify only what is matched by word-pat; they do not
change the matching behavior of what is matched by anchor (or coanchor; see the matchers below).
Thus, unless its corresponding part of the match pattern has been modified, the anchor in the
current word has to match literally in each completion, just like any other substring of the
current word.
If a matcher includes at least one anchor (which includes the matchers with two anchors, below),
then match-pat may also be `*' or `**'. `*' can match any part of a completion that does not
contain any substrings matching anchor, whereas a `**' can match any part of a completion, period.
(Note that this is different from the behavior of `*' in the anchorless forms of `l:' and `r:' and
and also different from `*' and `**' in glob expressions.)
Examples:
`r:|.=*' makes the completion `comp.sources.unix' a match for the word `..u' -- but not for
the word `.u'.
Given a completion `--foo', the matcher `L:--|no-=' will complete the word `--no-' to the
match `--no-foo'.
l:anchor||coanchor=match-pat
L:anchor||coanchor=match-pat
r:coanchor||anchor=match-pat
R:coanchor||anchor=match-pat
For any two consecutive substrings of the current word that match anchor and coanchor, in the
order given, insert the pattern match-pat between their corresponding parts in the match pattern.
Note that, unlike anchor, the pattern coanchor does not change what `*' can match.
Examples:
`r:?||[[:upper:]]=*' will complete the current word `fB' to `fooBar', but it will not
complete it to `fooHooBar' (because `*' here cannot match anything that includes a match
for `[[:upper:]]), nor will it complete `B' to `fooBar' (because there is no character in
the current word to match coanchor).
Given the current word `pass.n' and a completion `pass.byname', the matcher
`L:.||[[:alpha:]]=by' will produce the match `pass.name'.
x:
Ignore this matcher and all matchers to its right.
This matcher is used to mark the end of a match specification. In a single standalone list of
matchers, this has no use, but where match specifications are concatenated, as is often the case
when using the completion system (see zshcompsys(1)), it can allow one match specification to
override another.
COMPLETION WIDGET EXAMPLE
The first step is to define the widget:
zle -C complete complete-word complete-files
Then the widget can be bound to a key using the bindkey builtin command:
bindkey '^X\t' complete
After that the shell function complete-files will be invoked after typing control-X and TAB. The function
should then generate the matches, e.g.:
complete-files () { compadd - * }
This function will complete files in the current directory matching the current word.