Provided by: freebsd-manpages_12.2-2_all bug

NAME

     ng_patch — trivial mbuf data modifying netgraph node type

SYNOPSIS

     #include <netgraph/ng_patch.h>

DESCRIPTION

     The patch node performs data modification of packets passing through it.  Modifications are
     restricted to a subset of C language operations on unsigned integers of 8, 16, 32 or 64 bit
     size.  These are: set to new value (=), addition (+=), subtraction (-=), multiplication
     (*=), division (/=), negation (= -), bitwise AND (&=), bitwise OR (|=), bitwise eXclusive OR
     (^=), shift left (<<=), shift right (>>=).  A negation operation is the one exception:
     integer is treated as signed and second operand (the value) is not used.  If there is more
     than one modification operation, they are applied to packets sequentially in the order they
     were specified by the user.  The data payload of a packet is viewed as an array of bytes,
     with a zero offset corresponding to the very first byte of packet headers, and the length
     bytes beginning from offset as a single integer in network byte order. An additional offset
     can be optionally requested at configuration time to account for packet type.

HOOKS

     This node type has two hooks:

     in   Packets received on this hook are modified according to rules specified in the
          configuration and then forwarded to the out hook, if it exists.  Otherwise they are
          reflected back to the in hook.

     out  Packets received on this hook are forwarded to the in hook without any changes.

CONTROL MESSAGES

     This node type supports the generic control messages, plus the following:

     NGM_PATCH_SETDLT (setdlt)
          Sets the data link type on the in hook (to help calculate relative offset). Currently,
          supported types are DLT_RAW (raw IP datagrams , no offset applied, the default) and
          DLT_EN10MB (Ethernet). DLT_ definitions can be found in <net/bpf.h>.  If you want to
          work on the link layer header you must use no additional offset by specifying DLT_RAW.
          If EN10MB is specified, then the optional additional offset will take into account the
          Ethernet header and a QinQ header if present.

     NGM_PATCH_GETDLT (getdlt)
          This control message returns the data link type of the in hook.

     NGM_PATCH_SETCONFIG (setconfig)
          This command sets the sequence of modify operations that will be applied to incoming
          data on a hook.  The following struct ng_patch_config must be supplied as an argument:

              struct ng_patch_op {
                      uint32_t        offset;
                      uint16_t        length; /* 1,2,4 or 8 bytes */
                      uint16_t        mode;
                      uint64_t        value;
              };
              /* Patching modes */
              #define NG_PATCH_MODE_SET       1
              #define NG_PATCH_MODE_ADD       2
              #define NG_PATCH_MODE_SUB       3
              #define NG_PATCH_MODE_MUL       4
              #define NG_PATCH_MODE_DIV       5
              #define NG_PATCH_MODE_NEG       6
              #define NG_PATCH_MODE_AND       7
              #define NG_PATCH_MODE_OR        8
              #define NG_PATCH_MODE_XOR       9
              #define NG_PATCH_MODE_SHL       10
              #define NG_PATCH_MODE_SHR       11

              struct ng_patch_config {
                      uint32_t        count;
                      uint32_t        csum_flags;
                      uint32_t        relative_offset;
                      struct ng_patch_op ops[];
              };

          The csum_flags can be set to any combination of CSUM_IP, CSUM_TCP, CSUM_SCTP and
          CSUM_UDP (other values are ignored) for instructing the IP stack to recalculate the
          corresponding checksum before transmitting packet on output interface.  The ng_patch
          node does not do any checksum correction by itself.

     NGM_PATCH_GETCONFIG (getconfig)
          This control message returns the current set of modify operations, in the form of a
          struct ng_patch_config.

     NGM_PATCH_GET_STATS (getstats)
          Returns the node's statistics as a struct ng_patch_stats.

     NGM_PATCH_CLR_STATS (clrstats)
          Clears the node's statistics.

     NGM_PATCH_GETCLR_STATS (getclrstats)
          This command is identical to NGM_PATCH_GET_STATS, except that the statistics are also
          atomically cleared.

SHUTDOWN

     This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have
     been disconnected.

EXAMPLES

     This ng_patch node was designed to modify TTL and TOS/DSCP fields in IP packets.  As an
     example, suppose you have two adjacent simplex links to a remote network (e.g. satellite),
     so that the packets expiring in between will generate unwanted ICMP-replies which have to go
     forth, not back.  Thus you need to raise TTL of every packet entering link by 2 to ensure
     the TTL will not reach zero there.  To achieve this you can set an ipfw(8) rule to use the
     netgraph action to inject packets which are going to the simplex link into the patch node,
     by using the following ngctl(8) script:

         /usr/sbin/ngctl -f- <<-SEQ
                 mkpeer ipfw: patch 200 in
                 name ipfw:200 ttl_add
                 msg ttl_add: setconfig { count=1 csum_flags=1 ops=[     \
                         { mode=2 value=3 length=1 offset=8 } ] }
         SEQ
         /sbin/ipfw add 150 netgraph 200 ip from any to simplex.remote.net

     Here the “ttl_add” node of type ng_patch is configured to add (mode NG_PATCH_MODE_ADD) a
     value of 3 to a one-byte TTL field, which is 9th byte of IP packet header.

     Another example would be two consecutive modifications of packet TOS field: say, you need to
     clear the IPTOS_THROUGHPUT bit and set the IPTOS_MINCOST bit.  So you do:

         /usr/sbin/ngctl -f- <<-SEQ
                 mkpeer ipfw: patch 300 in
                 name ipfw:300 tos_chg
                 msg tos_chg: setconfig { count=2 csum_flags=1 ops=[     \
                         { mode=7 value=0xf7 length=1 offset=1 }         \
                         { mode=8 value=0x02 length=1 offset=1 } ] }
         SEQ
         /sbin/ipfw add 160 netgraph 300 ip from any to any not dst-port 80

     This first does NG_PATCH_MODE_AND clearing the fourth bit and then NG_PATCH_MODE_OR setting
     the third bit.

     In both examples the csum_flags field indicates that IP checksum (but not TCP or UDP
     checksum) should be recalculated before transmit.

     Note: one should ensure that packets are returned to ipfw after processing inside
     netgraph(4), by setting appropriate sysctl(8) variable:

         sysctl net.inet.ip.fw.one_pass=0

SEE ALSO

     netgraph(4), ng_ipfw(4), ngctl(8)

HISTORY

     The ng_patch node type was implemented in FreeBSD 8.1.

AUTHORS

     Maxim Ignatenko <gelraen.ua@gmail.com>.

     Relative offset code by
     DMitry Vagin

     This manual page was written by
     Vadim Goncharov <vadimnuclight@tpu.ru>.

BUGS

     The node blindly tries to apply every patching operation to each packet (except those which
     offset if greater than length of the packet), so be sure that you supply only the right
     packets to it (e.g. changing bytes in the ARP packets meant to be in IP header could corrupt
     them and make your machine unreachable from the network).

     !!! WARNING !!!

     The output path of the IP stack assumes correct fields and lengths in the packets - changing
     them by to incorrect values can cause unpredictable results including kernel panics.