Provided by: freebsd-manpages_12.2-2_all bug

NAME

     sbp — Serial Bus Protocol 2 (SBP-2) Mass Storage Devices driver

SYNOPSIS

     kldload firewire
     kldload cam
     kldload sbp

     or

     device sbp
     device firewire
     device scbus
     device da
     device cd
     device pass

DESCRIPTION

     The sbp driver provides support for SBP-2 devices that attach to the FireWire (IEEE 1394)
     port.  It should work with SBP-2 devices which the CAM layer supports, for example, HDDs,
     CDROM drives and DVD drives.

     Some users familiar with umass(4) might wonder why the device is not detached at the CAM
     layer when the device is unplugged.  It is detached only if the device has not been plugged
     again during several bus resets.  This is for preventing to detach an active file system
     even when the device cannot be probed correctly for some reason after a bus reset or when
     the device is temporary disconnected because the user changes the bus topology.  If you want
     to force to detach the device, run “fwcontrol -r” several times or set
     hw.firewire.hold_count=0 by sysctl(8).

     Some (broken) HDDs do not work well with tagged queuing.  If you have problems with such
     drives, try “camcontrol [device id] tags -N 1” to disable tagged queuing.

SEE ALSO

     cam(4), firewire(4), camcontrol(8), fwcontrol(8), kldload(8), sysctl(8)

AUTHORS

     The sbp driver was written by Katsushi Kobayashi and Hidetoshi Shimokawa.

     This manual page was written by Katsushi Kobayashi.