Provided by: freebsd-manpages_12.2-2_all bug

NAME

     ubsa — USB support for Belkin serial adapters

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel
     configuration file:

           device usb
           device ucom
           device ubsa

     Alternatively, to load the driver as a module at boot time, place the following line in
     loader.conf(5):

           ubsa_load="YES"

DESCRIPTION

     The ubsa driver provides support for the USB-to-RS232 Bridge chip used by a variety of
     serial adapters from Belkin and other vendors.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

     The ubsa driver supports the following adapters:

        AnyData ADU-500A EV-DO modem
        AnyData ADU-E100A (no EV-DO mode support)
        Belkin F5U103
        Belkin F5U120
        e-Tek Labs Kwik232
        GoHubs GoCOM232
        Peracom single port serial adapter

FILES

     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state devices

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The ubsa driver appeared in FreeBSD 5.0.  The uplcom(4) manual page was adopted from NetBSD
     by Tom Rhodes <trhodes@FreeBSD.org> in April 2002 and modified for the ubsa driver by
     Alexander Kabaev <kan@FreeBSD.org> in October 2002.

AUTHORS

     The ubsa driver was written by Alexander Kabaev <kan@FreeBSD.org>.