Ubuntu Manpage: mailcap - metamail capabilities file

NAME

       mailcap - metamail capabilities file

DESCRIPTION

The mailcap file is read by the metamail program to determine how to display non-text at
the local site.

The syntax of a mailcap file is quite simple, at least compared to termcap files. Any
line that starts with "#" is a comment. Blank lines are ignored. Otherwise, each line
defines a single mailcap entry for a single content type. Long lines may be continued by
ending them with a backslash character, \.

Each individual mailcap entry consists of a content-type specification, a command to
execute, and (possibly) a set of optional "flag" values. For example, a very simple
mailcap entry (which is actually a built-in default behavior for metamail) would look like
this:

text/plain; cat %s

The optional flags can be used to specify additional information about the mail-handling
command. For example:

text/plain; cat %s; copiousoutput

can be used to indicate that the output of the 'cat' command may be voluminous, requiring
either a scrolling window, a pager, or some other appropriate coping mechanism.

The "type" field (text/plain, in the above example) is simply any legal content type name,
as defined by informational RFC 1524. In practice, this is almost any string. It is the
string that will be matched against the "Content-type" header (or the value passed in with
-c) to decide if this is the mailcap entry that matches the current message.
Additionally, the type field may specify a subtype (e.g. "text/ISO-8859-1") or a wildcard
to match all subtypes (e.g. "image/*").

The "command" field is any UNIX command ("cat %s" in the above example), and is used to
specify the interpreter for the given type of message. It will be passed to the shell via
the system(3) facility. Semicolons and backslashes within the command must be quoted with
backslashes. If the command contains "%s", those two characters will be replaced by the
name of a file that contains the body of the message. If it contains "%t", those two
characters will be replaced by the content-type field, including the subtype, if any.
(That is, if the content-type was "image/pbm; opt1=something-else", then "%t" would be
replaced by "image/pbm".) If the command field contains "%{" followed by a parameter
name and a closing "}", then all those characters will be replaced by the value of the
named parameter, if any, from the Content-type header. Thus, in the previous example,
"%{opt1}" will be replaced by "something-else". Finally, if the command contains "\%",
those two characters will be replaced by a single % character. (In fact, the backslash
can be used to quote any character, including itself.)

If no "%s" appears in the command field, then instead of placing the message body in a
temporary file, metamail will pass the body to the command on the standard input. This is
helpful in saving /tmp file space, but can be problematic for window-oriented applications
under some window systems such as MGR.

Two special codes can appear in the viewing command for objects of type multipart (any
subtype). These are "%n" and "%F". %n will be replaced by the number of parts within the
multipart object. %F will be replaced by a series of arguments, two for each part, giving
first the content-type and then the name of the temporary file where the decoded part has
been stored. In addition, for each file created by %F, a second file is created, with the
same name followed by "H", which contains the header information for that body part. This
will not be needed by most multipart handlers, but it is there if you ever need it.

The "notes=xxx" field is an uninterpreted string that is used to specify the name of the
person who installed this entry in the mailcap file. (The "xxx" may be replaced by any
text string.)

The "test=xxx" field is a command that is executed to determine whether or not the mailcap
line actually applies. That is, if the content-type field matches the content-type on the
message, but a "test=" field is present, then the test must succeed before the mailcap
line is considered to "match" the message being viewed. The command may be any UNIX
command, using the same syntax and the same %-escapes as for the viewing command, as
described above. A command is considered to succeed if it exits with a zero exit status,
and to fail otherwise.

The "print=xxx" field is a command that is executed to print the data instead of display
it interactively. This behavior is usually a consequence of invoking metamail with the
"-h" switch.

The "textualnewlines" field can be used in the rather obscure case where metamail's
default rules for treating newlines in base64-encoded data are unsatisfactory. By
default, metamail will translate CRLF to the local newline character in decoded base64
output if the content-type is "text" (any subtype), but will not do so otherwise. A
mailcap entry with a field of "textualnewlines=1" will force such translation for the
specified content-type, while "textualnewlines=0" will guarantee that the translation does
not take place even for textual content-types.

The "compose" field may be used to specify a program that can be used to compose a new
body or body part in the given format. Its intended use is to support mail composing
agents that support the composition of multiple types of mail using external composing
agents. As with the view-command, the compose command will be executed after replacing
certain escape sequences starting with "%". In particular, %s should be replaced by the
name of a file to which the composed data is to be written by the specified composing
program, thus allowing the calling program (e.g. metamail) to tell the called program
where to store the composed data. If %s does not appear, then the composed data will be
assumed to be written by the composing programs to standard output. The result of the
composing program may be data that is NOT yet suitable for mail transport -- that is, a
Content-Transfer-Encoding may still need to be applied to the data.

The "composetyped" field is similar to the "compose" field, but is to be used when the
composing program needs to specify the Content-type header field to be applied to the
composed data. The "compose" field is simpler, and is preferred for use with existing
(non-mail-oriented) programs for composing data in a given format. The "composetyped"
field is necessary when the Content-type information must include auxiliary parameters,
and the composition program must then know enough about mail formats to produce output
that includes the mail type information, and to apply any necessary Content-Transfer-
Encoding. Conceptually, "compose" specifies a program that simply outputs the specified
type of data in its raw form, while "composetyped" specifies a program that outputs the
data as a MIME object, with all necessary Content-* headers already in place.

needsterminal
If this flag is given, the named interpreter needs to interact with the user on a
terminal. In some environments (e.g. a window-oriented mail reader under X11)
this will require the creation of a new terminal emulation window, while in most
environments it will not. If the mailcap entry specifies "needsterminal" and
metamail is not running on a terminal (as determined by isatty(3), the -x option,
and the MM_NOTTTY environment variable) then metamail will try to run the command
in a new terminal emulation window. Currently, metamail knows how to create new
windows under the X11, SunTools, and WM window systems.

copiousoutput
This flag should be given whenever the interpreter is capable of producing more
than a few lines of output on stdout, and does no interaction with the user. If
the mailcap entry specifies copiousoutput, and pagination has been requested via
the "-p" command, then the output of the command being executed will be piped
through a pagination program ("more" by default, but this can be overridden with
the METAMAIL_PAGER environment variable).

BUILT-IN CONTENT-TYPE SUPPORT

       The  metamail program has built-in support for a few key content-types.  In particular, it
       supports  the  text  type,  the  multipart  and  multipart/alternative   type,   and   the
       message/rfc822  types.   This  support  is incomplete for many subtypes -- for example, it
       only supports US-ASCII text in general.  This kind of built-in support can  be  OVERRIDDEN
       by  an entry in any mailcap file on the user's search path.  Metamail also has rudimentary
       built-in support for types that are totally unrecognized --  i.e.  for  which  no  mailcap
       entry or built-in handler exists.  For such unrecognized types, metamail will write a file
       with a "clean" copy of the data -- i.e. a  copy  in  which  all  mail  headers  have  been
       removed, and in which any 7-bit transport encoding has been decoded.

FILES

       $HOME/.mailcap:/etc/mailcap:/usr/share/etc/mailcap:/usr/local/etc/mailcap  -- default path
       for mailcap files.

COPYRIGHT

       Copyright (c) 1991 Bell Communications Research, Inc. (Bellcore)

       Permission to use, copy, modify, and distribute this material for any purpose and  without
       fee is hereby granted, provided that the above copyright notice and this permission notice
       appear in all copies, and that the  name  of  Bellcore  not  be  used  in  advertising  or
       publicity pertaining to this material without the specific, prior written permission of an
       authorized representative of  Bellcore.   BELLCORE  MAKES  NO  REPRESENTATIONS  ABOUT  THE
       ACCURACY OR SUITABILITY OF THIS MATERIAL FOR ANY PURPOSE.  IT IS PROVIDED "AS IS", WITHOUT
       ANY EXPRESS OR IMPLIED WARRANTIES.

AUTHOR