NAME

       systemd-cryptsetup-generator - Unit generator for /etc/crypttab

SYNOPSIS

       /usr/lib/systemd/system-generators/systemd-cryptsetup-generator

DESCRIPTION

       systemd-cryptsetup-generator is a generator that translates /etc/crypttab into native
       systemd units early at boot and when configuration of the system manager is reloaded. This
       will create systemd-cryptsetup@.service(8) units as necessary.

       systemd-cryptsetup-generator implements systemd.generator(7).

KERNEL COMMAND LINE

       systemd-cryptsetup-generator understands the following kernel command line parameters:

       luks=, rd.luks=
           Takes a boolean argument. Defaults to "yes". If "no", disables the generator entirely.
           rd.luks= is honored only in the initrd while luks= is honored by both the main system
           and in the initrd.

           Added in version 186.

       luks.crypttab=, rd.luks.crypttab=
           Takes a boolean argument. Defaults to "yes". If "no", causes the generator to ignore
           any devices configured in /etc/crypttab (luks.uuid= will still work however).
           rd.luks.crypttab= is honored only in initrd while luks.crypttab= is honored by both
           the main system and in the initrd.

           Added in version 186.

       luks.uuid=, rd.luks.uuid=
           Takes a LUKS superblock UUID as argument. This will activate the specified device as
           part of the boot process as if it was listed in /etc/crypttab. This option may be
           specified more than once in order to set up multiple devices.  rd.luks.uuid= is
           honored only in the initrd, while luks.uuid= is honored by both the main system and in
           the initrd.

           If /etc/crypttab contains entries with the same UUID, then the name, keyfile and
           options specified there will be used. Otherwise, the device will have the name
           "luks-UUID".

           If /etc/crypttab exists, only those UUIDs specified on the kernel command line will be
           activated in the initrd or the real root.

           Added in version 186.

       luks.name=, rd.luks.name=
           Takes a LUKS super block UUID followed by an "=" and a name. This implies
           rd.luks.uuid= or luks.uuid= and will additionally make the LUKS device given by the
           UUID appear under the provided name.

           This parameter is the analogue of the first crypttab(5) field volume-name.

           rd.luks.name= is honored only in the initrd, while luks.name= is honored by both the
           main system and in the initrd.

           Added in version 218.

       luks.data=, rd.luks.data=
           Takes a LUKS super block UUID followed by a "=" and a block device specification for
           device hosting encrypted data.

           For those entries specified with rd.luks.uuid= or luks.uuid=, the data device will be
           set to the one specified by rd.luks.data= or luks.data= of the corresponding UUID.

           LUKS data device parameter is useful for specifying encrypted data devices with
           detached headers specified in luks.options entry containing "header=" argument. For
           example, rd.luks.uuid=b40f1abf-2a53-400a-889a-2eccc27eaa40
           rd.luks.options=b40f1abf-2a53-400a-889a-2eccc27eaa40=header=/path/to/luks.hdr
           rd.luks.data=b40f1abf-2a53-400a-889a-2eccc27eaa40=/dev/sdx. Hence, in this case, we
           will attempt to unlock LUKS device assembled from data device "/dev/sdx" and LUKS
           header (metadata) put in "/path/to/luks.hdr" file. This syntax is for now only
           supported on a per-device basis, i.e. you have to specify LUKS device UUID.

           This parameter is the analogue of the second crypttab(5) field encrypted-device.

           rd.luks.data= is honored only in the initrd, while luks.data= is honored by both the
           main system and in the initrd.

           Added in version 247.

       luks.key=, rd.luks.key=
           Takes a password file name as argument or a LUKS super block UUID followed by a "="
           and a password file name.

           For those entries specified with rd.luks.uuid= or luks.uuid=, the password file will
           be set to the one specified by rd.luks.key= or luks.key= of the corresponding UUID, or
           the password file that was specified without a UUID.

           It is also possible to specify an external device which should be mounted before we
           attempt to unlock the LUKS device. systemd-cryptsetup will use password file stored on
           that device. Device containing password file is specified by appending colon and a
           device identifier to the password file path. For example,
           rd.luks.uuid=b40f1abf-2a53-400a-889a-2eccc27eaa40
           rd.luks.key=b40f1abf-2a53-400a-889a-2eccc27eaa40=/keyfile:LABEL=keydev. Hence, in this
           case, we will attempt to mount file system residing on the block device with label
           "keydev". This syntax is for now only supported on a per-device basis, i.e. you have
           to specify LUKS device UUID.

           This parameter is the analogue of the third crypttab(5) field key-file.

           rd.luks.key= is honored only in the initrd, while luks.key= is honored by both the
           main system and in the initrd.

           Added in version 202.

       luks.options=, rd.luks.options=
           Takes a LUKS super block UUID followed by an "=" and a string of options separated by
           commas as argument. This will override the options for the given UUID.

           If only a list of options, without a UUID, is specified, they apply to any UUIDs not
           specified elsewhere, and without an entry in /etc/crypttab.

           This parameter is the analogue of the fourth crypttab(5) field options.

           It is possible to specify an external device which should be mounted before we attempt
           to unlock the LUKS device. systemd-cryptsetup will assemble LUKS device by combining
           data device specified in luks.data with detached LUKS header found in "header="
           argument. For example, rd.luks.uuid=b40f1abf-2a53-400a-889a-2eccc27eaa40
           rd.luks.options=b40f1abf-2a53-400a-889a-2eccc27eaa40=header=/luks.hdr:LABEL=hdrdev
           rd.luks.data=b40f1abf-2a53-400a-889a-2eccc27eaa40=/dev/sdx. Hence, in this case, we
           will attempt to mount file system residing on the block device with label "hdrdev",
           and look for "luks.hdr" on that file system. Said header will be used to unlock
           (decrypt) encrypted data stored on /dev/sdx. This syntax is for now only supported on
           a per-device basis, i.e. you have to specify LUKS device UUID.

           rd.luks.options= is honored only by initial RAM disk (initrd) while luks.options= is
           honored by both the main system and in the initrd.

           Added in version 208.

SEE ALSO

       systemd(1), crypttab(5), systemd-cryptsetup@.service(8), systemd-cryptenroll(1),
       cryptsetup(8), systemd-fstab-generator(8)